Cutters Mill 1-10™ • Inch

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (61)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(61)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(61)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(61)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(61)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(61)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(61)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(61)
    • M Stainless Steel (61)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(61)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(61)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(61)
    • K Cast Iron (61)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(61)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(61)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(61)
    • N Non-Ferrous Materials (61)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(61)
      • N1
        Wrought Aluminum (61)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(61)
    • S High-Temp Alloys (61)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(61)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(61)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(61)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(61)
    • H Hardened Materials (61)
      • H1
        Hardened Materials 44-48 HRC(61)
    Vybrat první volbu
    • US (42)
    Applications
    Applications
    • Face MillingFace Milling (61)
    • PocketPocket (61)
    • Pocket HelicalPocket Helical (61)
    • Pocket MillingPocket Milling (61)
    • RampingRamping (61)
    • Shoulder MillingShoulder Milling (61)
    • Shoulder RoughingShoulder Roughing (61)
    • Shoulder Square EndShoulder Square End (61)
    • Slot MillingSlot Milling (35)
    • Slot Square EndSlot Square End (35)
    Cutting Diameter
    Cutting Diameter
    • 0.5 in(1)
    • 0.625 in(5)
    • 0.75 in(11)
    • 0.875 in(1)
    • 1.0 in(16)
    • 1.1 in(1)
    • 1.25 in(12)
    • 1.5 in(5)
    • 2.0 in(4)
    • 2.5 in(2)
    • 3.0 in(2)
    • 4.0 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 12.7 mm(1)
    • 15.875 mm(5)
    • 19.05 mm(11)
    • 22.22 mm(1)
    • 25.4 mm(16)
    • 27.94 mm(1)
    • 31.75 mm(12)
    • 38.1 mm(5)
    • 50.8 mm(4)
    • 63.5 mm(2)
    • 76.2 mm(2)
    • 101.6 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.7 mm(1)
    • 9.75 mm(2)
    • 9.78 mm(1)
    • 9.83 mm(1)
    • 9.87 mm(7)
    • 9.9 mm(1)
    • 9.94 mm(2)
    • 9.96 mm(8)
    • 10.01 mm(1)
    • 10.03 mm(12)
    • 10.05 mm(1)
    • 10.06 mm(3)
    • 10.07 mm(1)
    • 10.1 mm(2)
    • 10.11 mm(6)
    • 10.26 mm(1)
    • 18.67 mm(1)
    • 18.8 mm(1)
    • 18.93 mm(1)
    • 27.77 mm(1)
    • 36.0 mm(2)
    • 36.37 mm(1)
    • 44.33 mm(2)
    • 44.8 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.382 in(1)
    • 0.384 in(2)
    • 0.385 in(1)
    • 0.387 in(1)
    • 0.3886 in(7)
    • 0.3898 in(1)
    • 0.3913 in(2)
    • 0.392 in(6)
    • 0.3921 in(2)
    • 0.394 in(1)
    • 0.3949 in(2)
    • 0.395 in(10)
    • 0.3957 in(1)
    • 0.396 in(4)
    • 0.3976 in(2)
    • 0.398 in(6)
    • 0.404 in(1)
    • 0.735 in(1)
    • 0.7402 in(1)
    • 0.7453 in(1)
    • 1.0933 in(1)
    • 1.4173 in(2)
    • 1.4319 in(1)
    • 1.7453 in(2)
    • 1.7638 in(2)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.8 in(1)
    • 0.987 in(1)
    • 0.999 in(1)
    • 1.0 in(3)
    • 1.0531 in(2)
    • 1.1 in(6)
    • 1.239 in(1)
    • 1.25 in(13)
    • 1.3921 in(1)
    • 1.5 in(3)
    • 1.575 in(6)
    • 1.589 in(2)
    • 1.6 in(7)
    • 1.6142 in(1)
    • 1.75 in(2)
    • 1.7902 in(1)
    • 1.889 in(1)
    • 1.9 in(2)
    • 2.0 in(3)
    • 2.0902 in(2)
    • 2.4 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 20.32 mm(1)
    • 25.07 mm(1)
    • 25.38 mm(1)
    • 25.4 mm(3)
    • 26.75 mm(2)
    • 27.94 mm(6)
    • 31.47 mm(1)
    • 31.75 mm(13)
    • 35.36 mm(1)
    • 38.1 mm(3)
    • 40.0 mm(6)
    • 40.36 mm(2)
    • 40.64 mm(7)
    • 41.0 mm(1)
    • 44.45 mm(2)
    • 45.47 mm(1)
    • 47.98 mm(1)
    • 48.26 mm(2)
    • 50.8 mm(3)
    • 53.09 mm(2)
    • 60.96 mm(2)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (13)
    • Screw-On Connection (9)
    • Straight-Cylindrical (26)
    • Weldon (13)
    Number of Flutes
    Number of Flutes
    • 1 (1)
    • 10 (1)
    • 2 (14)
    • 3 (17)
    • 4 (13)
    • 5 (8)
    • 6 (3)
    • 8 (3)
    • 9 (1)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (56)
    • 2.0 (61)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(6)
    • 1.6693 in(1)
    • 1.75 in(2)
    • 1.848 in(2)
    • 2.0 in(3)
    • 2.1161 in(2)
    • 2.4 in(2)
    • 2.4055 in(3)
    • 2.5197 in(1)
    • 3.03 in(1)
    • 3.13 in(2)
    • 3.28 in(2)
    • 3.422 in(1)
    • 3.5 in(1)
    • 3.53 in(2)
    • 3.88 in(2)
    • 4.0 in(1)
    • 4.0705 in(1)
    • 4.3705 in(2)
    • 4.4063 in(1)
    • 4.5 in(2)
    • 4.8 in(5)
    • 5.2 in(2)
    • 6.688 in(1)
    • 6.689 in(1)
    • 6.7 in(4)
    • 7.989 in(3)
    • 8.0 in(5)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(6)
    • 42.4 mm(1)
    • 44.45 mm(2)
    • 46.94 mm(2)
    • 50.8 mm(3)
    • 53.75 mm(2)
    • 60.96 mm(2)
    • 61.1 mm(3)
    • 64.0 mm(1)
    • 76.96 mm(1)
    • 79.5 mm(1)
    • 79.51 mm(1)
    • 83.32 mm(2)
    • 86.92 mm(1)
    • 88.9 mm(1)
    • 89.67 mm(2)
    • 98.56 mm(2)
    • 101.6 mm(1)
    • 103.39 mm(1)
    • 111.01 mm(2)
    • 111.92 mm(1)
    • 114.3 mm(2)
    • 121.92 mm(5)
    • 132.08 mm(2)
    • 169.87 mm(1)
    • 169.9 mm(1)
    • 170.18 mm(4)
    • 202.92 mm(3)
    • 203.2 mm(5)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(56)
    • 0.016 in(56)
    • 0.031 in(56)
    • 0.039 in(56)
    • 0.047 in(56)
    • 0.063 in(56)
    • 0.079 in(56)
    • 0.094 in(56)
    • 0.122 in(61)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(56)
    • 0.4 mm(56)
    • 0.8 mm(56)
    • 1.0 mm(56)
    • 1.2 mm(56)
    • 1.6 mm(56)
    • 2.0 mm(56)
    • 2.375 mm(56)
    • 3.1 mm(61)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (56)
    • KC410M (61)
    • KC422M (56)
    • KC510M (56)
    • KC520M (56)
    • KC522M (61)
    • KC725M (61)
    • KCK15 (56)
    • KCK20B (56)
    • KCKP10 (56)
    • KCPK30 (61)
    • KCPM20 (56)
    • KCPM40 (56)
    • KCSM30 (56)
    • KCSM40 (61)
    • KD1410 (56)
    Hand Of Tool
    Hand Of Tool
    • R (60)
    • R - Right Hand Helix/Flute (1)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.5 (1)
    • 0.75 (2)
    • 1.0 (2)
    • 1.5 (4)
    • 2.0 (6)
    • 2.5 (11)
    • 3.0 (2)
    • 3.25 (1)
    • 4.0 (14)
    • 5.0 (1)
    • 5.25 (1)
    • 6.5 (10)
    • 8.0 (1)
    • 9.5 (4)
    • 11.5 (1)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • E-PARALLELOGRAM 70 (61)
    • X-PARALLELOGRAM 70 (61)
    • X-PARALLELOGRAM 75 (61)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (39)
    • SCREW-ON (9)
    • SHELL MILL (13)
    Back-End Diameter
    Back-End Diameter
    • 13.0 mm(1)
    • 15.875 mm(3)
    • 18.0 mm(2)
    • 19.0 mm(5)
    • 19.05 mm(21)
    • 21.0 mm(2)
    • 25.4 mm(13)
    • 29.0 mm(4)
    • 31.75 mm(9)
    • 38.1 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5118 in(1)
    • 0.625 in(3)
    • 0.7087 in(2)
    • 0.75 in(26)
    • 0.8268 in(2)
    • 1.0 in(13)
    • 1.1417 in(4)
    • 1.25 in(9)
    • 1.5 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Number of Inserts
    Number of Inserts
    • 1.0 (1)
    • 2.0 (9)
    • 3.0 (13)
    • 4.0 (15)
    • 5.0 (6)
    • 6.0 (5)
    • 8.0 (4)
    • 9.0 (1)
    • 10.0 (2)
    • 12.0 (1)
    • 15.0 (2)
    • 20.0 (1)
    • 25.0 (1)
    Number of Inserts MinkomuNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 0.8 in(1)
    • 0.987 in(1)
    • 0.999 in(1)
    • 1.0 in(3)
    • 1.0531 in(2)
    • 1.1 in(6)
    • 1.239 in(1)
    • 1.25 in(13)
    • 1.3921 in(1)
    • 1.5 in(3)
    • 1.589 in(2)
    • 1.6 in(7)
    • 1.6142 in(1)
    • 1.7902 in(1)
    • 1.889 in(1)
    • 1.9 in(2)
    • 2.0902 in(2)
    Head Length [L2] MinkomuHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 20.32 mm(1)
    • 25.07 mm(1)
    • 25.38 mm(1)
    • 25.4 mm(3)
    • 26.75 mm(2)
    • 27.94 mm(6)
    • 31.47 mm(1)
    • 31.75 mm(13)
    • 35.36 mm(1)
    • 38.1 mm(3)
    • 40.36 mm(2)
    • 40.64 mm(7)
    • 41.0 mm(1)
    • 45.47 mm(1)
    • 47.98 mm(1)
    • 48.26 mm(2)
    • 53.09 mm(2)
    Head Length [L2] MinkomuHead Length [L2] Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)