Zahlubovací nástroje

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (92)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(92)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(92)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(92)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(92)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(92)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(92)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(92)
    • M Stainless Steel (92)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(92)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(92)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(92)
    • K Cast Iron (110)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(110)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(110)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(110)
    • N Non-Ferrous Materials (64)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(60)
      • N7
        MMC's (59)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (64)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (64)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(64)
      • N1
        Wrought Aluminum (64)
      • N6
        Carbon, Graphite Composites, CFRP (64)
    • S High-Temp Alloys (91)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(91)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(91)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(91)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(91)
    • H Hardened Materials (51)
      • H2
        Hardened Materials 48-55 HRC(51)
      • H1
        Hardened Materials 44-48 HRC(51)
      • H3
        Hardened Materials 56-60 HRC(51)
      • H4
        Hardened Materials >60 HRC(51)
    Applications
    Applications
    • CounterboringCounterboring (35)
    • DrillingDrilling (35)
    Cutting Diameter
    Cutting Diameter
    • 0.5959 in(1)
    • 0.6352 in(1)
    • 0.6746 in(1)
    • 0.714 in(2)
    • 0.7939 in(1)
    • 0.794 in(1)
    • 0.8125 in(1)
    • 0.8333 in(2)
    • 0.8726 in(1)
    • 0.873 in(1)
    • 0.912 in(2)
    • 0.951 in(1)
    • 0.9514 in(1)
    • 0.9907 in(2)
    • 1.0 in(1)
    • 1.03 in(1)
    • 1.0695 in(1)
    • 1.109 in(1)
    • 1.1875 in(1)
    • 1.188 in(1)
    • 1.268 in(1)
    • 1.307 in(1)
    • 1.3463 in(1)
    • 1.3856 in(1)
    • 1.425 in(1)
    • 1.5037 in(1)
    • 1.582 in(1)
    • 1.625 in(1)
    • 1.661 in(1)
    • 1.819 in(1)
    • 2.0 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.135 mm(1)
    • 16.135 mm(1)
    • 17.135 mm(1)
    • 18.135 mm(2)
    • 20.165 mm(2)
    • 20.637 mm(1)
    • 21.165 mm(2)
    • 22.165 mm(2)
    • 23.165 mm(2)
    • 24.165 mm(2)
    • 25.165 mm(2)
    • 25.4 mm(1)
    • 26.165 mm(1)
    • 27.165 mm(1)
    • 28.165 mm(1)
    • 30.162 mm(1)
    • 30.165 mm(1)
    • 32.195 mm(1)
    • 33.195 mm(1)
    • 34.195 mm(1)
    • 35.195 mm(1)
    • 36.195 mm(1)
    • 38.195 mm(1)
    • 40.195 mm(1)
    • 41.275 mm(1)
    • 42.195 mm(1)
    • 46.195 mm(1)
    • 50.8 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Condition Material
    Cutting Condition Material
    • K1 (31)
    • K2 (31)
    • K3 (31)
    • M1 (39)
    • M2 (39)
    • M3 (39)
    • N1 (5)
    • N2 (5)
    • N3 (5)
    • N4 (5)
    • N5 (5)
    • N6 (5)
    • N7 (5)
    • P0 (39)
    • P1 (39)
    • P2 (39)
    • P3 (39)
    • P4 (39)
    • P5 (39)
    • P6 (39)
    • S1 (31)
    • S2 (31)
    • S3 (31)
    • S4 (31)
    Cutting Condition
    Cutting Condition
    • Interrupted (23)
    • Stable (75)
    • Unstable (23)
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 8.5 mm(2)
    • 11.0 mm(1)
    • 12.7 mm(1)
    • 13.5 mm(3)
    • 15.875 mm(1)
    • 16.0 mm(7)
    • 18.5 mm(1)
    • 19.05 mm(1)
    • 21.0 mm(3)
    • 23.0 mm(2)
    • 23.5 mm(3)
    • 25.4 mm(1)
    • 25.5 mm(3)
    • 27.5 mm(1)
    • 30.0 mm(1)
    • 30.5 mm(1)
    • 31.75 mm(1)
    • 33.5 mm(2)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.3346 in(2)
    • 0.4331 in(1)
    • 0.5 in(1)
    • 0.5315 in(3)
    • 0.625 in(1)
    • 0.6299 in(7)
    • 0.7283 in(1)
    • 0.75 in(1)
    • 0.8268 in(3)
    • 0.9055 in(2)
    • 0.9252 in(3)
    • 1.0 in(1)
    • 1.0039 in(3)
    • 1.0827 in(1)
    • 1.1811 in(1)
    • 1.2008 in(1)
    • 1.25 in(1)
    • 1.3189 in(2)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Connection Style
    Connection Style
    • Weldon (5)
    • Whistle Notch 2 (30)
    Number of Flutes
    Number of Flutes
    • 2 (12)
    • 3 (23)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 2.0 (111)
    • 4.0 (35)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.189 in(2)
    • 3.3858 in(9)
    • 3.5 in(2)
    • 3.5827 in(4)
    • 3.7795 in(4)
    • 3.9764 in(4)
    • 4.0 in(1)
    • 4.3701 in(2)
    • 4.5 in(2)
    • 4.5669 in(1)
    • 4.7638 in(2)
    • 4.9606 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 81.0 mm(2)
    • 86.0 mm(9)
    • 88.91 mm(2)
    • 91.0 mm(4)
    • 96.0 mm(4)
    • 101.0 mm(4)
    • 101.61 mm(1)
    • 111.0 mm(2)
    • 114.31 mm(2)
    • 116.0 mm(1)
    • 121.0 mm(2)
    • 126.0 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(3)
    • 0.016 in(34)
    • 0.024 in(4)
    • 0.031 in(15)
    • 0.039 in(6)
    • 0.047 in(6)
    • 0.063 in(5)
    • 0.079 in(3)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(3)
    • 0.4 mm(34)
    • 0.6 mm(4)
    • 0.8 mm(15)
    • 1.0 mm(6)
    • 1.2 mm(6)
    • 1.6 mm(5)
    • 2.0 mm(3)
    Corner Radius MinkomuCorner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(76)
    Corner Chamfer MinkomuCorner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(76)
    Corner Chamfer MinkomuCorner Chamfer Max
    application
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CS5 (23)
    • KC7140 (39)
    • KC720 (13)
    • KC7215 (67)
    • KCMS35 (13)
    • KCPK10 (41)
    • KCU25 (48)
    • KCU40 (49)
    • KM1 (41)
    Hand Of Tool
    Hand Of Tool
    • R (35)
    Drill Type
    Drill Type
    • 86-04 Indexable Counterbore (35)
    Wiper Insert
    Wiper Insert
    • N (76)
    Drilling Condition Material
    Drilling Condition Material
    • K1 (66)
    • K2 (66)
    • K3 (66)
    • M1 (74)
    • M2 (74)
    • M3 (74)
    • N1 (40)
    • N2 (40)
    • N3 (40)
    • N4 (40)
    • N5 (40)
    • N6 (40)
    • N7 (40)
    • P0 (74)
    • P1 (74)
    • P2 (74)
    • P3 (74)
    • P4 (74)
    • P5 (74)
    • P6 (74)
    • S1 (66)
    • S2 (66)
    • S3 (66)
    • S4 (66)
    insertGeometry
    Shape
    Shape
    • S-SQUARE 90 (76)
    Insert IC Size
    Insert IC Size
    • 6.35 mm(13)
    • 7.925 mm(16)
    • 9.525 mm(20)
    • 12.7 mm(18)
    • 15.875 mm(9)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(13)
    • 0.312 in(16)
    • 0.375 in(20)
    • 0.5 in(18)
    • 0.625 in(9)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 6.35 mm(13)
    • 7.937 mm(16)
    • 9.525 mm(20)
    • 12.7 mm(27)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.25 in(13)
    • 0.3125 in(16)
    • 0.375 in(20)
    • 0.5 in(27)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 20 (33)
    • 21 (30)
    • 22 (4)
    Cutting Tool Material
    Cutting Tool Material
    • H W (76)
    Tolerance Class
    Tolerance Class
    • H (12)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (35)
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(2)
    • 20.0 mm(23)
    • 25.4 mm(2)
    • 31.75 mm(1)
    • 32.0 mm(7)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(2)
    • 0.7874 in(23)
    • 1.0 in(2)
    • 1.25 in(1)
    • 1.2598 in(7)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • R (76)
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)