Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Mill 1-10™ • Two Cutting Edges • Ap1 max 10mm

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (218)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(201)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(201)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(201)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(203)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(216)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(216)
    • M Stainless Steel (216)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(216)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(216)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(216)
    • K Cast Iron (190)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(190)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(189)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(189)
    • N Non-Ferrous Materials (145)
      • N1
        Wrought Aluminum (145)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(144)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(144)
    • S High-Temp Alloys (215)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(193)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(193)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(193)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(215)
    • H Hardened Materials (147)
      • H1
        Hardened Materials 44-48 HRC(147)
    Vybrat první volbu
    • BR (15)
    • CN (111)
    • DE (113)
    • GB (63)
    • IN (29)
    • SG (46)
    • US (98)
    Applications
    Applications
    • Face MillingFace Milling (128)
    • PocketPocket (128)
    • Pocket HelicalPocket Helical (128)
    • Pocket MillingPocket Milling (128)
    • RampingRamping (128)
    • Shoulder MillingShoulder Milling (128)
    • Shoulder RoughingShoulder Roughing (128)
    • Shoulder Square EndShoulder Square End (128)
    • Slot MillingSlot Milling (81)
    • Slot Square EndSlot Square End (81)
    Cutting Diameter
    Cutting Diameter
    • 0.472 in(1)
    • 0.5 in(1)
    • 0.625 in(5)
    • 0.6299 in(1)
    • 0.63 in(4)
    • 0.709 in(1)
    • 0.75 in(11)
    • 0.787 in(8)
    • 0.7874 in(5)
    • 0.79 in(1)
    • 0.866 in(1)
    • 0.875 in(1)
    • 0.984 in(10)
    • 0.9843 in(4)
    • 1.0 in(16)
    • 1.1 in(1)
    • 1.102 in(1)
    • 1.25 in(12)
    • 1.2598 in(5)
    • 1.26 in(9)
    • 1.5 in(5)
    • 1.5748 in(3)
    • 1.575 in(2)
    • 1.6535 in(1)
    • 1.9685 in(4)
    • 2.0 in(4)
    • 2.4803 in(2)
    • 2.5 in(2)
    • 3.0 in(2)
    • 3.1496 in(2)
    • 3.937 in(2)
    • 4.0 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 12.0 mm(1)
    • 12.7 mm(1)
    • 15.875 mm(5)
    • 16.0 mm(5)
    • 18.0 mm(1)
    • 19.05 mm(11)
    • 20.0 mm(14)
    • 22.0 mm(1)
    • 22.22 mm(1)
    • 25.0 mm(14)
    • 25.4 mm(16)
    • 27.94 mm(1)
    • 28.0 mm(1)
    • 31.75 mm(12)
    • 32.0 mm(14)
    • 38.1 mm(5)
    • 40.0 mm(5)
    • 42.0 mm(1)
    • 50.0 mm(4)
    • 50.8 mm(4)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(2)
    • 80.0 mm(2)
    • 100.0 mm(2)
    • 101.6 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 9.68 mm(1)
    • 9.7 mm(2)
    • 9.73 mm(1)
    • 9.75 mm(3)
    • 9.78 mm(2)
    • 9.8 mm(1)
    • 9.83 mm(2)
    • 9.87 mm(15)
    • 9.9 mm(1)
    • 9.93 mm(4)
    • 9.94 mm(2)
    • 9.96 mm(16)
    • 10.01 mm(2)
    • 10.03 mm(18)
    • 10.04 mm(2)
    • 10.05 mm(2)
    • 10.06 mm(8)
    • 10.07 mm(1)
    • 10.08 mm(6)
    • 10.09 mm(2)
    • 10.1 mm(2)
    • 10.11 mm(6)
    • 10.26 mm(2)
    • 18.67 mm(2)
    • 18.8 mm(3)
    • 18.92 mm(2)
    • 18.93 mm(1)
    • 27.74 mm(2)
    • 27.77 mm(1)
    • 35.92 mm(1)
    • 35.94 mm(1)
    • 36.0 mm(2)
    • 36.37 mm(2)
    • 36.38 mm(1)
    • 44.33 mm(4)
    • 44.78 mm(3)
    • 44.8 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.381 in(1)
    • 0.382 in(2)
    • 0.383 in(1)
    • 0.384 in(3)
    • 0.385 in(2)
    • 0.386 in(1)
    • 0.387 in(2)
    • 0.3886 in(15)
    • 0.3898 in(1)
    • 0.3909 in(2)
    • 0.391 in(2)
    • 0.3913 in(2)
    • 0.392 in(12)
    • 0.3921 in(4)
    • 0.394 in(2)
    • 0.3949 in(2)
    • 0.395 in(16)
    • 0.3953 in(2)
    • 0.3957 in(2)
    • 0.396 in(9)
    • 0.397 in(6)
    • 0.3972 in(2)
    • 0.3976 in(2)
    • 0.398 in(6)
    • 0.404 in(2)
    • 0.735 in(2)
    • 0.74 in(2)
    • 0.7402 in(1)
    • 0.745 in(2)
    • 0.7453 in(1)
    • 1.092 in(2)
    • 1.0933 in(1)
    • 1.414 in(1)
    • 1.415 in(1)
    • 1.4173 in(2)
    • 1.4319 in(1)
    • 1.432 in(1)
    • 1.4323 in(1)
    • 1.7453 in(4)
    • 1.763 in(3)
    • 1.7638 in(2)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.787 in(1)
    • 0.8 in(1)
    • 0.972 in(1)
    • 0.984 in(3)
    • 0.9843 in(1)
    • 0.987 in(1)
    • 0.999 in(1)
    • 1.0 in(3)
    • 1.0531 in(2)
    • 1.1 in(8)
    • 1.102 in(5)
    • 1.1024 in(2)
    • 1.239 in(1)
    • 1.249 in(2)
    • 1.25 in(13)
    • 1.2598 in(2)
    • 1.26 in(7)
    • 1.3 in(2)
    • 1.3921 in(1)
    • 1.417 in(2)
    • 1.5 in(3)
    • 1.564 in(2)
    • 1.5748 in(4)
    • 1.575 in(19)
    • 1.589 in(2)
    • 1.6 in(8)
    • 1.6142 in(1)
    • 1.75 in(2)
    • 1.7902 in(1)
    • 1.811 in(2)
    • 1.879 in(2)
    • 1.889 in(1)
    • 1.89 in(2)
    • 1.9 in(2)
    • 1.9685 in(6)
    • 2.0 in(3)
    • 2.0902 in(2)
    • 2.126 in(3)
    • 2.3622 in(2)
    • 2.4 in(2)
    Reach MinkomuReach Max
    Reach
    Reach
    • 20.0 mm(1)
    • 20.32 mm(1)
    • 24.69 mm(1)
    • 25.0 mm(4)
    • 25.07 mm(1)
    • 25.38 mm(1)
    • 25.4 mm(3)
    • 26.75 mm(2)
    • 27.94 mm(6)
    • 28.0 mm(9)
    • 31.47 mm(1)
    • 31.72 mm(2)
    • 31.75 mm(13)
    • 32.0 mm(11)
    • 35.36 mm(1)
    • 36.0 mm(2)
    • 38.1 mm(3)
    • 39.72 mm(2)
    • 40.0 mm(24)
    • 40.36 mm(2)
    • 40.64 mm(7)
    • 41.0 mm(1)
    • 44.45 mm(2)
    • 45.47 mm(1)
    • 46.0 mm(2)
    • 47.72 mm(2)
    • 47.98 mm(1)
    • 48.0 mm(2)
    • 48.26 mm(2)
    • 50.0 mm(6)
    • 50.8 mm(3)
    • 53.09 mm(2)
    • 54.0 mm(3)
    • 60.0 mm(2)
    • 60.96 mm(2)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (128)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (25)
    • B-Cutter Retention Screw (2)
    • Screw-On Connection (21)
    • Straight-Cylindrical (56)
    • Weldon (24)
    Number of Flutes
    Number of Flutes
    • 1 (2)
    • 10 (2)
    • 12 (1)
    • 2 (34)
    • 3 (33)
    • 4 (25)
    • 5 (16)
    • 6 (7)
    • 8 (6)
    • 9 (2)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (118)
    • 2.0 (252)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(12)
    • 1.6535 in(1)
    • 1.6693 in(1)
    • 1.75 in(2)
    • 1.848 in(2)
    • 1.8504 in(2)
    • 1.9685 in(6)
    • 2.0 in(3)
    • 2.0078 in(1)
    • 2.1161 in(2)
    • 2.126 in(3)
    • 2.3622 in(2)
    • 2.4 in(2)
    • 2.4055 in(3)
    • 2.4803 in(5)
    • 2.5197 in(1)
    • 2.913 in(1)
    • 3.03 in(1)
    • 3.11 in(2)
    • 3.13 in(2)
    • 3.28 in(2)
    • 3.422 in(1)
    • 3.425 in(1)
    • 3.5 in(1)
    • 3.504 in(2)
    • 3.53 in(2)
    • 3.543 in(1)
    • 3.551 in(1)
    • 3.88 in(2)
    • 3.937 in(1)
    • 3.976 in(2)
    • 4.0 in(1)
    • 4.055 in(1)
    • 4.0705 in(1)
    • 4.1339 in(1)
    • 4.3307 in(1)
    • 4.331 in(2)
    • 4.3705 in(2)
    • 4.4063 in(1)
    • 4.5 in(2)
    • 4.52 in(2)
    • 4.5276 in(1)
    • 4.724 in(2)
    • 4.734 in(1)
    • 4.8 in(5)
    • 5.118 in(2)
    • 5.2 in(2)
    • 6.681 in(1)
    • 6.682 in(2)
    • 6.688 in(1)
    • 6.689 in(1)
    • 6.693 in(5)
    • 6.7 in(4)
    • 7.863 in(4)
    • 7.874 in(5)
    • 7.989 in(3)
    • 8.0 in(5)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(12)
    • 42.0 mm(1)
    • 42.4 mm(1)
    • 44.45 mm(2)
    • 46.94 mm(2)
    • 47.0 mm(2)
    • 50.0 mm(6)
    • 50.8 mm(3)
    • 51.0 mm(1)
    • 53.75 mm(2)
    • 54.0 mm(3)
    • 60.0 mm(2)
    • 60.96 mm(2)
    • 61.1 mm(3)
    • 63.0 mm(5)
    • 64.0 mm(1)
    • 74.0 mm(1)
    • 76.96 mm(1)
    • 79.0 mm(2)
    • 79.5 mm(1)
    • 79.51 mm(1)
    • 83.32 mm(2)
    • 86.92 mm(1)
    • 87.0 mm(1)
    • 88.9 mm(1)
    • 89.0 mm(2)
    • 89.67 mm(2)
    • 90.0 mm(1)
    • 90.2 mm(1)
    • 98.56 mm(2)
    • 100.0 mm(1)
    • 101.0 mm(2)
    • 101.6 mm(1)
    • 103.0 mm(1)
    • 103.39 mm(1)
    • 105.0 mm(1)
    • 110.0 mm(3)
    • 111.01 mm(2)
    • 111.92 mm(1)
    • 114.3 mm(2)
    • 115.0 mm(3)
    • 120.0 mm(2)
    • 120.24 mm(1)
    • 121.92 mm(5)
    • 130.0 mm(2)
    • 132.08 mm(2)
    • 169.69 mm(1)
    • 169.72 mm(2)
    • 169.87 mm(1)
    • 169.9 mm(1)
    • 170.0 mm(5)
    • 170.18 mm(4)
    • 199.72 mm(4)
    • 200.0 mm(5)
    • 202.92 mm(3)
    • 203.2 mm(5)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(120)
    • 0.016 in(138)
    • 0.031 in(149)
    • 0.039 in(120)
    • 0.047 in(136)
    • 0.063 in(134)
    • 0.079 in(123)
    • 0.094 in(123)
    • 0.122 in(139)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(120)
    • 0.4 mm(138)
    • 0.8 mm(149)
    • 1.0 mm(120)
    • 1.2 mm(136)
    • 1.6 mm(134)
    • 2.0 mm(123)
    • 2.375 mm(123)
    • 3.1 mm(139)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (117)
    • KC410M (135)
    • KC422M (121)
    • KC510M (117)
    • KC520M (123)
    • KC522M (143)
    • KC725M (153)
    • KCK15 (123)
    • KCK20B (123)
    • KCKP10 (117)
    • KCPK30 (150)
    • KCPM20 (117)
    • KCPM40 (125)
    • KCSM30 (117)
    • KCSM40 (143)
    • KD1410 (118)
    Hand Of Tool
    Hand Of Tool
    • R (127)
    • R - Right Hand Helix/Flute (1)
    Wiper Insert
    Wiper Insert
    • N (126)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 0.5 (3)
    • 0.75 (4)
    • 1.0 (4)
    • 1.5 (8)
    • 1.75 (1)
    • 2.0 (13)
    • 2.5 (11)
    • 2.75 (12)
    • 3.0 (4)
    • 3.25 (2)
    • 4.0 (26)
    • 4.5 (2)
    • 5.0 (2)
    • 5.25 (1)
    • 6.0 (12)
    • 6.5 (10)
    • 7.5 (1)
    • 8.0 (2)
    • 9.5 (8)
    • 11.5 (2)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • E-PARALLELOGRAM 70 (233)
    • X-PARALLELOGRAM 70 (132)
    • X-PARALLELOGRAM 75 (145)
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • E-PARALLELOGRAM 70 (105)
    • X-PARALLELOGRAM 70 (4)
    • X-PARALLELOGRAM 75 (17)
    Cutting Edge Length
    Cutting Edge Length
    • 10.027 mm(4)
    • 10.09 mm(3)
    • 10.199 mm(4)
    • 10.34 mm(4)
    • 10.342 mm(6)
    • 10.35 mm(6)
    • 10.36 mm(44)
    • 10.362 mm(4)
    • 10.46 mm(10)
    • 10.47 mm(41)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.3948 in(4)
    • 0.397 in(3)
    • 0.4015 in(4)
    • 0.407 in(4)
    • 0.4072 in(6)
    • 0.4079 in(8)
    • 0.408 in(46)
    • 0.412 in(51)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (16)
    • GE (21)
    • HD (43)
    • LD (44)
    Cutting Tool Material
    Cutting Tool Material
    • D P (2)
    • H W (123)
    Tolerance Class
    Tolerance Class
    • C (105)
    • P (21)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (80)
    • SCREW-ON (21)
    • SHELL MILL (27)
    Back-End Diameter
    Back-End Diameter
    • 13.0 mm(2)
    • 15.875 mm(3)
    • 16.0 mm(10)
    • 18.0 mm(5)
    • 19.0 mm(5)
    • 19.05 mm(21)
    • 20.0 mm(12)
    • 21.0 mm(5)
    • 22.0 mm(6)
    • 25.0 mm(12)
    • 25.4 mm(13)
    • 27.0 mm(2)
    • 29.0 mm(9)
    • 31.75 mm(9)
    • 32.0 mm(13)
    • 38.1 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5118 in(2)
    • 0.625 in(3)
    • 0.6299 in(8)
    • 0.63 in(2)
    • 0.7087 in(4)
    • 0.71 in(1)
    • 0.75 in(26)
    • 0.7874 in(12)
    • 0.8268 in(5)
    • 0.8661 in(6)
    • 0.98 in(1)
    • 0.9843 in(11)
    • 1.0 in(13)
    • 1.063 in(2)
    • 1.1417 in(9)
    • 1.25 in(9)
    • 1.2598 in(13)
    • 1.5 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • R (126)
    Number of Inserts
    Number of Inserts
    • 1.0 (2)
    • 2.0 (20)
    • 3.0 (24)
    • 4.0 (31)
    • 5.0 (12)
    • 6.0 (12)
    • 8.0 (9)
    • 9.0 (2)
    • 10.0 (4)
    • 12.0 (3)
    • 15.0 (5)
    • 20.0 (2)
    • 25.0 (2)
    Number of Inserts MinkomuNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 0.787 in(1)
    • 0.8 in(1)
    • 0.972 in(1)
    • 0.984 in(3)
    • 0.9843 in(1)
    • 0.987 in(1)
    • 0.999 in(1)
    • 1.0 in(3)
    • 1.0531 in(2)
    • 1.1 in(8)
    • 1.102 in(5)
    • 1.1024 in(2)
    • 1.239 in(1)
    • 1.249 in(2)
    • 1.25 in(13)
    • 1.2598 in(2)
    • 1.26 in(7)
    • 1.3 in(2)
    • 1.3921 in(1)
    • 1.417 in(2)
    • 1.5 in(3)
    • 1.564 in(2)
    • 1.5748 in(4)
    • 1.575 in(7)
    • 1.589 in(2)
    • 1.6 in(8)
    • 1.6142 in(1)
    • 1.7902 in(1)
    • 1.811 in(2)
    • 1.879 in(2)
    • 1.889 in(1)
    • 1.89 in(2)
    • 1.9 in(2)
    • 2.0902 in(2)
    • 2.115 in(1)
    • 2.126 in(2)
    Head Length [L2] MinkomuHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 20.0 mm(1)
    • 20.32 mm(1)
    • 24.69 mm(1)
    • 25.0 mm(4)
    • 25.07 mm(1)
    • 25.38 mm(1)
    • 25.4 mm(3)
    • 26.75 mm(2)
    • 27.94 mm(6)
    • 28.0 mm(9)
    • 31.47 mm(1)
    • 31.72 mm(2)
    • 31.75 mm(13)
    • 32.0 mm(11)
    • 35.36 mm(1)
    • 36.0 mm(2)
    • 38.1 mm(3)
    • 39.72 mm(2)
    • 40.0 mm(12)
    • 40.36 mm(2)
    • 40.64 mm(7)
    • 41.0 mm(1)
    • 45.47 mm(1)
    • 46.0 mm(2)
    • 47.72 mm(2)
    • 47.98 mm(1)
    • 48.0 mm(2)
    • 48.26 mm(2)
    • 53.09 mm(2)
    • 53.73 mm(1)
    • 54.0 mm(2)
    Head Length [L2] MinkomuHead Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    Mill 1-10™ • Two Cutting Edges • Ap1 max 10mm
    Inserts Mill 1-10™
    (126)

    Inserts Mill 1-10™

    Cutters Mill 1-10™ • Metric
    (67)

    Cutters Mill 1-10™ • Metric

    Cutters Mill 1-10™ • Inch
    (61)

    Cutters Mill 1-10™ • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk