Thread Turning Cutting Tools
Kennametal is a global leader of high-performance thread-turning cutting tools. Solutions include Laydown Threading Inserts, Top Notch™ Threading Tools, and KM Mini Cutting Tools with mini shanks designed to achieve dramatic improvement in machining operations. Whether you're looking for high-precision finishes or improved efficiency, Kennametal's thread-turning tools are the perfect solution.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (1185)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1185)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1185)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1185)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1185)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1185)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1185)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1185)
- M Stainless Steel (1185)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1185)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1185)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1185)
- K Cast Iron (1066)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1066)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1066)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1066)
- N Non-Ferrous Materials (601)
- N1Wrought Aluminum (601)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(566)
- N3High-Silicon Aluminum Alloys Si >12.2%(75)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (601)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (566)
- N6Carbon, Graphite Composites, CFRP (566)
- N7MMC's (16)
- S High-Temp Alloys (1178)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1178)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1178)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1178)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1178)
- H Hardened Materials (362)
- H1Hardened Materials 44-48 HRC(362)
- H2Hardened Materials 48-55 HRC(263)
- H3Hardened Materials 56-60 HRC(106)
- H4Hardened Materials >60 HRC(106)
Select First Choice
- DE (63)
- GB (41)
- SG (36)
Applications
Applications
Chamfer Turning (4)
Cut-Off (4)
Deep Grooving (4)
Face Grooving (191)
Facing (4)
Grooving (134)
ID Grooving (69)
ID Thread Turning (681)
Multiple Direction Cutting (4)
OD Thread Turning (924)
Plunge Turning (4)
Profiling (4)
Turning (4)
Cutting Condition Material
Cutting Condition Material
- H-All (188)
- K-All (191)
- M-All (191)
- N-All (192)
- P-All (191)
- S-All (192)
Type of Thread
Type of Thread
- 55 (106)
- 60 (449)
- ACME (271)
- API (149)
- API BUTTRESS (29)
- API RD (147)
- BSPT (58)
- BSW (217)
- BUTTRESS (208)
- M (254)
- NPT (169)
- NPTF (58)
- RD DIN 405 (81)
- STUB ACME (191)
- TR DIN 103 (110)
- UN (508)
- UNJ (254)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (191)
- Lightly Interrupted Cut (191)
- Smooth Cut (192)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (325)
to
Connection Style
Connection Style
- Bolt-On Head (7)
- Boring Bar Shank (115)
- KM (17)
- Toolholder (147)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (190)
- 2.0 (727)
- 3.0 (492)
- 4.0 (5)
to
Over All Length [L]
Over All Length [L]
- 1.1811 in(17)
- 1.625 in(7)
- 2.1654 in(1)
- 2.1917 in(1)
- 2.3622 in(1)
- 2.5 in(4)
- 2.756 in(2)
- 3.15 in(2)
- 3.25 in(2)
- 3.3465 in(2)
- 3.5 in(4)
- 3.937 in(8)
- 3.94 in(2)
- 4.0 in(3)
- 4.5 in(14)
- 4.921 in(9)
- 4.9213 in(5)
- 5.0 in(25)
- 5.905 in(1)
- 5.9055 in(13)
- 5.906 in(18)
- 5.996 in(1)
- 6.0 in(55)
- 6.06 in(1)
- 6.1 in(2)
- 6.11 in(2)
- 6.6929 in(5)
- 6.693 in(10)
- 6.89 in(4)
- 7.0 in(13)
- 7.079 in(2)
- 7.0866 in(10)
- 7.087 in(1)
- 7.874 in(9)
- 7.93 in(1)
- 7.976 in(1)
- 8.0 in(7)
- 8.058 in(2)
- 8.082 in(1)
- 9.8425 in(8)
- 9.879 in(1)
- 10.0 in(18)
- 11.811 in(6)
- 12.0 in(8)
- 13.7795 in(1)
- 14.0 in(7)
- 16.0 in(8)
to
Over All Length [L]
Over All Length [L]
- 30.0 mm(17)
- 41.275 mm(7)
- 55.0 mm(1)
- 55.67 mm(1)
- 60.0 mm(1)
- 63.5 mm(4)
- 70.0 mm(2)
- 80.0 mm(2)
- 82.55 mm(2)
- 85.0 mm(2)
- 88.9 mm(4)
- 100.0 mm(10)
- 101.6 mm(3)
- 114.3 mm(14)
- 125.0 mm(14)
- 127.0 mm(25)
- 150.0 mm(32)
- 152.0 mm(2)
- 152.29 mm(1)
- 152.4 mm(52)
- 153.0 mm(1)
- 154.0 mm(2)
- 155.0 mm(3)
- 170.0 mm(15)
- 175.0 mm(4)
- 177.8 mm(11)
- 178.0 mm(2)
- 179.8 mm(2)
- 180.0 mm(11)
- 200.0 mm(9)
- 201.422 mm(1)
- 202.591 mm(1)
- 203.19 mm(1)
- 203.2 mm(6)
- 204.673 mm(2)
- 205.283 mm(1)
- 250.0 mm(8)
- 250.927 mm(1)
- 254.0 mm(18)
- 300.0 mm(6)
- 304.8 mm(8)
- 350.0 mm(1)
- 355.6 mm(7)
- 406.4 mm(8)
to
Corner Radius
Corner Radius
- 0.001 in(18)
- 0.002 in(144)
- 0.003 in(338)
- 0.004 in(225)
- 0.005 in(86)
- 0.006 in(157)
- 0.007 in(244)
- 0.008 in(252)
- 0.009 in(84)
- 0.01 in(179)
- 0.011 in(95)
- 0.012 in(83)
- 0.013 in(123)
- 0.014 in(120)
- 0.016 in(77)
- 0.017 in(23)
- 0.018 in(107)
- 0.019 in(33)
- 0.02 in(149)
- 0.021 in(24)
- 0.023 in(107)
- 0.026 in(3)
- 0.028 in(17)
- 0.03 in(72)
- 0.031 in(139)
- 0.032 in(5)
- 0.035 in(106)
- 0.036 in(9)
- 0.038 in(1)
- 0.039 in(155)
- 0.047 in(139)
- 0.049 in(45)
- 0.059 in(139)
- 0.062 in(63)
- 0.063 in(178)
- 0.069 in(45)
- 0.078 in(63)
- 0.079 in(64)
- 0.089 in(4)
- 0.094 in(102)
- 0.098 in(22)
- 0.125 in(39)
to
Corner Radius
Corner Radius
- 0.025 mm(18)
- 0.05 mm(144)
- 0.075 mm(338)
- 0.1 mm(225)
- 0.125 mm(86)
- 0.15 mm(157)
- 0.175 mm(244)
- 0.2 mm(252)
- 0.225 mm(84)
- 0.25 mm(179)
- 0.275 mm(95)
- 0.3 mm(83)
- 0.325 mm(123)
- 0.35 mm(120)
- 0.4 mm(77)
- 0.425 mm(23)
- 0.45 mm(107)
- 0.475 mm(33)
- 0.5 mm(149)
- 0.525 mm(24)
- 0.575 mm(107)
- 0.65 mm(3)
- 0.7 mm(17)
- 0.75 mm(72)
- 0.775 mm(139)
- 0.825 mm(5)
- 0.9 mm(106)
- 0.925 mm(9)
- 0.975 mm(1)
- 1.0 mm(155)
- 1.2 mm(139)
- 1.25 mm(45)
- 1.5 mm(139)
- 1.575 mm(63)
- 1.6 mm(178)
- 1.75 mm(45)
- 1.975 mm(63)
- 2.0 mm(64)
- 2.25 mm(4)
- 2.4 mm(102)
- 2.5 mm(22)
- 3.175 mm(39)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(917)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(917)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (185)
- K420 (192)
- K68 (224)
- KB1630 (102)
- KBH20 (32)
- KC5010 (453)
- KC5025 (757)
- KC5410 (109)
- KC720 (226)
- KC730 (294)
- KC850 (223)
- KC9110 (21)
- KCK20 (139)
- KCK20B (178)
- KCP10B (178)
- KCP25B (178)
- KCU10 (263)
- KCU10B (194)
- KCU25 (270)
- KCU25B (180)
- KD1425 (63)
- KT315 (123)
- PN120 (2)
- THM (8)
- TN6010 (11)
- TN6025 (16)
- TTS (2)
- WU10HT (2)
- WU10PT (5)
- WU25PT (2)
Hand Of Tool
Hand Of Tool
- L (116)
- R (170)
Wiper Insert
Wiper Insert
- N (1238)
F Dimension
F Dimension
- 6.55 mm(1)
- 6.553 mm(2)
- 6.73 mm(1)
- 7.0 mm(2)
- 7.112 mm(4)
- 7.3 mm(4)
- 8.26 mm(1)
- 8.89 mm(3)
- 8.9 mm(2)
- 9.52 mm(2)
- 10.0 mm(1)
- 10.3 mm(1)
- 10.312 mm(1)
- 10.785 mm(1)
- 10.973 mm(4)
- 11.0 mm(4)
- 11.1 mm(2)
- 11.3 mm(2)
- 11.5 mm(2)
- 11.684 mm(4)
- 11.7 mm(1)
- 12.0 mm(1)
- 12.573 mm(3)
- 12.7 mm(8)
- 12.954 mm(4)
- 13.0 mm(2)
- 13.4 mm(3)
- 14.0 mm(2)
- 14.148 mm(3)
- 14.27 mm(1)
- 14.275 mm(3)
- 15.6 mm(2)
- 15.8 mm(1)
- 15.875 mm(3)
- 15.88 mm(2)
- 16.0 mm(19)
- 16.002 mm(2)
- 16.1 mm(2)
- 16.3 mm(2)
- 16.51 mm(3)
- 17.0 mm(4)
- 17.2 mm(2)
- 17.348 mm(2)
- 17.4 mm(1)
- 17.475 mm(2)
- 17.48 mm(2)
- 18.034 mm(3)
- 19.05 mm(6)
- 19.558 mm(1)
- 20.0 mm(6)
- 21.5 mm(2)
- 21.59 mm(1)
- 22.0 mm(8)
- 22.225 mm(4)
- 24.0 mm(2)
- 25.0 mm(15)
- 25.4 mm(20)
- 25.8 mm(2)
- 27.0 mm(4)
- 28.575 mm(2)
- 31.75 mm(27)
- 32.0 mm(22)
- 34.925 mm(4)
- 35.0 mm(1)
- 38.1 mm(16)
- 38.887 mm(1)
- 40.0 mm(7)
- 41.275 mm(4)
- 50.8 mm(4)
to
F Dimension
F Dimension
- 0.258 in(3)
- 0.265 in(1)
- 0.276 in(2)
- 0.28 in(4)
- 0.2874 in(4)
- 0.325 in(1)
- 0.35 in(3)
- 0.3504 in(2)
- 0.375 in(2)
- 0.394 in(1)
- 0.4055 in(1)
- 0.406 in(1)
- 0.4281 in(1)
- 0.432 in(4)
- 0.433 in(4)
- 0.437 in(2)
- 0.4449 in(2)
- 0.4528 in(2)
- 0.46 in(4)
- 0.463 in(1)
- 0.472 in(1)
- 0.495 in(3)
- 0.5 in(8)
- 0.51 in(4)
- 0.512 in(2)
- 0.5276 in(3)
- 0.551 in(2)
- 0.557 in(3)
- 0.562 in(4)
- 0.6142 in(2)
- 0.622 in(1)
- 0.625 in(5)
- 0.6299 in(15)
- 0.63 in(6)
- 0.6339 in(2)
- 0.6417 in(2)
- 0.65 in(3)
- 0.669 in(4)
- 0.6772 in(2)
- 0.683 in(2)
- 0.685 in(1)
- 0.688 in(4)
- 0.71 in(3)
- 0.75 in(6)
- 0.77 in(1)
- 0.787 in(2)
- 0.7874 in(4)
- 0.8465 in(2)
- 0.85 in(1)
- 0.8661 in(8)
- 0.875 in(4)
- 0.9449 in(2)
- 0.984 in(4)
- 0.9843 in(11)
- 1.0 in(20)
- 1.0157 in(2)
- 1.063 in(4)
- 1.125 in(2)
- 1.25 in(27)
- 1.2598 in(13)
- 1.26 in(9)
- 1.375 in(4)
- 1.378 in(1)
- 1.5 in(16)
- 1.531 in(1)
- 1.5748 in(3)
- 1.575 in(4)
- 1.625 in(4)
- 2.0 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(87)
- 11.176 mm(1)
- 11.18 mm(1)
- 11.181 mm(1)
- 11.5 mm(2)
- 12.19 mm(1)
- 12.7 mm(4)
- 13.0 mm(4)
- 15.24 mm(1)
- 16.0 mm(2)
- 16.51 mm(3)
- 17.0 mm(1)
- 18.5 mm(2)
- 18.542 mm(6)
- 20.0 mm(5)
- 20.32 mm(5)
- 22.0 mm(3)
- 22.86 mm(4)
- 24.0 mm(3)
- 25.4 mm(5)
- 26.0 mm(2)
- 27.0 mm(2)
- 28.575 mm(4)
- 28.58 mm(1)
- 29.0 mm(5)
- 30.48 mm(3)
- 31.75 mm(3)
- 32.0 mm(3)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(4)
- 36.83 mm(1)
- 38.1 mm(5)
- 39.0 mm(2)
- 41.3 mm(31)
- 44.0 mm(2)
- 44.45 mm(2)
- 47.0 mm(2)
- 47.6 mm(31)
- 50.0 mm(2)
- 50.8 mm(2)
- 54.0 mm(4)
- 55.88 mm(3)
- 56.625 mm(33)
- 57.15 mm(1)
- 57.2 mm(18)
- 60.325 mm(2)
- 63.5 mm(22)
- 69.85 mm(4)
- 70.0 mm(1)
- 76.2 mm(8)
- 76.962 mm(1)
- 82.55 mm(4)
- 88.9 mm(66)
- 127.0 mm(1)
- 139.7 mm(31)
- 146.05 mm(3)
- 174.6 mm(31)
- 209.6 mm(20)
- 222.3 mm(18)
- 333.0 mm(3)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(87)
- 0.44 in(2)
- 0.4402 in(1)
- 0.453 in(2)
- 0.48 in(1)
- 0.5 in(4)
- 0.5118 in(4)
- 0.6 in(1)
- 0.6299 in(2)
- 0.65 in(3)
- 0.6693 in(1)
- 0.728 in(2)
- 0.73 in(6)
- 0.787 in(1)
- 0.7874 in(4)
- 0.8 in(5)
- 0.866 in(2)
- 0.8661 in(1)
- 0.9 in(4)
- 0.9449 in(3)
- 1.0 in(5)
- 1.024 in(2)
- 1.063 in(2)
- 1.125 in(5)
- 1.1417 in(5)
- 1.2 in(3)
- 1.25 in(3)
- 1.2598 in(3)
- 1.339 in(4)
- 1.375 in(6)
- 1.45 in(1)
- 1.5 in(5)
- 1.5354 in(2)
- 1.626 in(31)
- 1.7323 in(2)
- 1.75 in(2)
- 1.8504 in(2)
- 1.874 in(31)
- 1.9685 in(2)
- 2.0 in(2)
- 2.126 in(4)
- 2.2 in(3)
- 2.229 in(33)
- 2.25 in(1)
- 2.252 in(18)
- 2.375 in(2)
- 2.5 in(22)
- 2.75 in(4)
- 2.7559 in(1)
- 3.0 in(8)
- 3.03 in(1)
- 3.25 in(4)
- 3.5 in(66)
- 5.0 in(1)
- 5.5 in(31)
- 5.75 in(3)
- 6.874 in(31)
- 8.252 in(20)
- 8.752 in(18)
- 13.11 in(3)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(192)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(192)
to
Countersunk Angle
Countersunk Angle
- 7.0 (12)
- 10.0 (3)
- 14.5 (145)
- 15.0 (12)
- 27.0 (8)
- 27.5 (58)
- 30.0 (651)
- 33.0 (8)
- 45.0 (18)
to
Cutting Direction
Cutting Direction
- E (156)
- S (130)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (105)
- NEGATIVE-ZERO (23)
- NEUTRAL (ZERO) (158)
Maximum Bore Depth
Maximum Bore Depth
- 0.9843 in(2)
- 1.0 in(12)
- 1.231 in(1)
- 1.235 in(1)
- 1.25 in(2)
- 1.2598 in(3)
- 1.29 in(1)
- 1.415 in(1)
- 1.5 in(3)
- 1.55 in(1)
- 1.57 in(1)
- 1.5748 in(3)
- 1.85 in(1)
- 1.88 in(2)
- 2.0 in(26)
- 2.25 in(2)
- 2.3622 in(2)
- 2.5 in(9)
- 2.5196 in(2)
- 2.52 in(2)
- 3.0 in(6)
- 3.125 in(1)
- 3.1496 in(4)
- 3.16 in(2)
- 3.75 in(5)
- 3.7758 in(1)
- 3.7794 in(1)
- 3.92 in(2)
- 3.936 in(2)
- 3.9372 in(4)
- 4.0 in(4)
- 4.5 in(4)
- 4.7244 in(1)
- 5.0 in(4)
- 5.0392 in(5)
- 5.9058 in(1)
- 6.0 in(6)
- 6.2992 in(6)
- 7.0 in(3)
- 7.874 in(1)
- 8.0 in(6)
- 9.0 in(1)
- 10.0 in(8)
to
Maximum Bore Depth
Maximum Bore Depth
- 25.0 mm(2)
- 25.4 mm(12)
- 31.26 mm(1)
- 31.3 mm(1)
- 31.75 mm(2)
- 32.0 mm(3)
- 32.8 mm(1)
- 35.94 mm(1)
- 38.1 mm(3)
- 39.5 mm(1)
- 39.878 mm(1)
- 40.0 mm(3)
- 47.5 mm(1)
- 48.0 mm(2)
- 50.8 mm(26)
- 57.15 mm(2)
- 60.0 mm(2)
- 63.48 mm(1)
- 63.5 mm(8)
- 64.0 mm(4)
- 76.2 mm(6)
- 79.375 mm(1)
- 80.0 mm(6)
- 95.25 mm(5)
- 96.0 mm(2)
- 100.0 mm(8)
- 101.6 mm(4)
- 114.3 mm(4)
- 120.0 mm(1)
- 127.0 mm(4)
- 128.0 mm(5)
- 150.0 mm(1)
- 152.4 mm(6)
- 160.0 mm(6)
- 177.8 mm(3)
- 200.0 mm(1)
- 203.2 mm(6)
- 228.6 mm(1)
- 254.0 mm(8)
to
Boring Bar Material
Boring Bar Material
- C (21)
- H (6)
- S (95)
Front-End
Clamp Style
Clamp Style
- C (60)
- M (24)
- N (198)
- S (21)
- Y (21)
Cutting Width
Cutting Width
- 0.0197 in(76)
- 0.031 in(84)
- 0.0315 in(76)
- 0.035 in(39)
- 0.039 in(76)
- 0.0394 in(139)
- 0.041 in(76)
- 0.047 in(147)
- 0.0472 in(139)
- 0.055 in(76)
- 0.0551 in(76)
- 0.058 in(76)
- 0.0591 in(139)
- 0.062 in(147)
- 0.0669 in(76)
- 0.067 in(76)
- 0.0689 in(139)
- 0.072 in(63)
- 0.076 in(37)
- 0.0768 in(76)
- 0.077 in(37)
- 0.078 in(63)
- 0.0787 in(139)
- 0.079 in(108)
- 0.0866 in(139)
- 0.088 in(139)
- 0.0886 in(107)
- 0.094 in(147)
- 0.097 in(63)
- 0.0984 in(139)
- 0.105 in(63)
- 0.108 in(76)
- 0.1083 in(139)
- 0.11 in(63)
- 0.118 in(102)
- 0.1181 in(178)
- 0.122 in(63)
- 0.125 in(178)
- 0.126 in(102)
- 0.1278 in(76)
- 0.128 in(63)
- 0.129 in(37)
- 0.131 in(32)
- 0.1378 in(143)
- 0.142 in(63)
- 0.147 in(39)
- 0.151 in(76)
- 0.156 in(63)
- 0.157 in(63)
- 0.1574 in(64)
- 0.1575 in(102)
- 0.167 in(39)
- 0.1673 in(63)
- 0.1771 in(7)
- 0.1772 in(102)
- 0.178 in(63)
- 0.185 in(63)
- 0.188 in(102)
- 0.189 in(102)
- 0.192 in(32)
- 0.193 in(32)
- 0.195 in(63)
- 0.196 in(63)
- 0.1969 in(39)
- 0.197 in(21)
- 0.213 in(39)
- 0.2165 in(18)
- 0.2166 in(21)
- 0.2362 in(39)
- 0.25 in(40)
- 0.256 in(39)
- 0.281 in(2)
- 0.312 in(2)
- 0.375 in(3)
- 0.381 in(3)
- 0.384 in(8)
to
Cutting Width
Cutting Width
- 0.5 mm(76)
- 0.787 mm(84)
- 0.8 mm(76)
- 0.889 mm(39)
- 0.991 mm(76)
- 1.0 mm(139)
- 1.041 mm(76)
- 1.19 mm(107)
- 1.194 mm(147)
- 1.2 mm(139)
- 1.39 mm(76)
- 1.397 mm(39)
- 1.4 mm(76)
- 1.473 mm(76)
- 1.5 mm(139)
- 1.57 mm(100)
- 1.575 mm(147)
- 1.69 mm(39)
- 1.7 mm(76)
- 1.702 mm(76)
- 1.75 mm(139)
- 1.829 mm(63)
- 1.94 mm(37)
- 1.95 mm(76)
- 1.956 mm(37)
- 1.981 mm(63)
- 2.0 mm(139)
- 2.007 mm(76)
- 2.2 mm(139)
- 2.235 mm(102)
- 2.236 mm(32)
- 2.24 mm(76)
- 2.25 mm(107)
- 2.387 mm(32)
- 2.388 mm(147)
- 2.39 mm(31)
- 2.464 mm(63)
- 2.5 mm(139)
- 2.667 mm(63)
- 2.74 mm(37)
- 2.743 mm(39)
- 2.75 mm(139)
- 2.794 mm(63)
- 2.997 mm(102)
- 3.0 mm(178)
- 3.099 mm(63)
- 3.17 mm(63)
- 3.175 mm(178)
- 3.18 mm(58)
- 3.2 mm(102)
- 3.245 mm(76)
- 3.25 mm(63)
- 3.251 mm(32)
- 3.27 mm(37)
- 3.32 mm(32)
- 3.329 mm(32)
- 3.5 mm(143)
- 3.607 mm(63)
- 3.73 mm(39)
- 3.835 mm(39)
- 3.84 mm(76)
- 3.96 mm(63)
- 3.962 mm(63)
- 3.974 mm(32)
- 3.988 mm(63)
- 4.0 mm(102)
- 4.242 mm(39)
- 4.25 mm(63)
- 4.5 mm(102)
- 4.521 mm(63)
- 4.699 mm(63)
- 4.775 mm(102)
- 4.78 mm(18)
- 4.785 mm(18)
- 4.788 mm(21)
- 4.8 mm(63)
- 4.801 mm(102)
- 4.88 mm(32)
- 4.9 mm(32)
- 4.95 mm(63)
- 4.953 mm(32)
- 4.978 mm(63)
- 5.0 mm(39)
- 5.004 mm(21)
- 5.41 mm(39)
- 5.5 mm(39)
- 6.0 mm(39)
- 6.35 mm(40)
- 6.36 mm(21)
- 6.502 mm(39)
- 7.137 mm(2)
- 7.925 mm(2)
- 9.525 mm(3)
- 9.677 mm(3)
- 9.754 mm(8)
to
Insert Shape
Insert Shape
- LT-TRIANGLE LAY DOWN THREAD 60 (492)
- TN-TOP NOTCH (748)
Insert Size
Insert Size
- 1 (8)
- 2 (49)
- 3 (36)
- 4 (19)
- 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 in(11)
- 0.04 in(1)
- 0.063 in(2)
- 0.067 in(1)
- 0.07 in(2)
- 0.075 in(1)
- 0.13 in(1)
- 0.138 in(39)
- 0.1382 in(1)
- 0.21 in(39)
- 0.24 in(2)
- 0.25 in(2)
- 0.294 in(23)
- 0.3 in(1)
- 0.334 in(4)
- 0.415 in(2)
- 0.4151 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(11)
- 1.016 mm(1)
- 1.6 mm(2)
- 1.69 mm(1)
- 1.78 mm(2)
- 1.9 mm(1)
- 3.3 mm(1)
- 3.505 mm(21)
- 3.51 mm(19)
- 5.33 mm(16)
- 5.334 mm(23)
- 6.096 mm(2)
- 6.35 mm(2)
- 7.46 mm(8)
- 7.468 mm(9)
- 7.47 mm(6)
- 7.62 mm(1)
- 8.484 mm(4)
- 10.54 mm(1)
- 10.541 mm(1)
- 10.543 mm(1)
to
Thread TPI
Thread TPI
- 2.0 (7)
- 2.5 (2)
- 3.0 (4)
- 4.0 (39)
- 5.0 (30)
- 6.0 (36)
- 7.0 (9)
- 8.0 (69)
- 9.0 (2)
- 10.0 (32)
- 11.0 (15)
- 11.5 (12)
- 12.0 (53)
- 13.0 (2)
- 14.0 (54)
- 16.0 (70)
- 18.0 (30)
- 19.0 (5)
- 20.0 (36)
- 24.0 (28)
- 27.0 (2)
- 28.0 (18)
- 32.0 (18)
- 36.0 (1)
- 40.0 (2)
- 48.0 (29)
to
Thread Pitch
Thread Pitch
- 0.35 mm(1)
- 0.4 mm(1)
- 0.5 mm(7)
- 0.75 mm(7)
- 0.8 mm(1)
- 1.0 mm(13)
- 1.25 mm(9)
- 1.5 mm(33)
- 1.75 mm(7)
- 2.0 mm(19)
- 2.5 mm(8)
- 3.0 mm(32)
- 3.5 mm(3)
- 4.0 mm(4)
- 4.5 mm(2)
- 5.0 mm(10)
- 6.25 mm(3)
to
Thread Pitch
Thread Pitch
- 0.35 in(1)
- 0.4 in(1)
- 0.5 in(7)
- 0.75 in(7)
- 0.8 in(1)
- 1.0 in(13)
- 1.25 in(9)
- 1.5 in(33)
- 1.75 in(7)
- 2.0 in(19)
- 2.5 in(8)
- 3.0 in(32)
- 3.5 in(3)
- 4.0 in(4)
- 4.5 in(2)
- 5.0 in(10)
- 6.25 in(3)
to
Insert Geometry
Shape
Shape
- LT-TRIANGLE LAY DOWN THREAD 60 (366)
- TN-TOP NOTCH (549)
Insert IC Size
Insert IC Size
- 4.0 mm(1)
- 4.762 mm(3)
- 5.0 mm(7)
- 6.35 mm(44)
- 9.525 mm(269)
- 12.7 mm(41)
- 15.875 mm(4)
to
Insert IC Size
Insert IC Size
- 0.1575 in(1)
- 0.1696 in(1)
- 0.1875 in(3)
- 0.1969 in(6)
- 0.25 in(44)
- 0.375 in(269)
- 0.5 in(41)
- 0.625 in(4)
to
Insert Seat Size
Insert Seat Size
- 1 (6)
- 11 (1)
- 16 (3)
- 2 (78)
- 3 (379)
- 4 (65)
- 4U (3)
- 6 (15)
- 8 (11)
Cutting Edge Length
Cutting Edge Length
- 6.928 mm(1)
- 8.66 mm(7)
- 11.0 mm(1)
- 16.498 mm(3)
to
Cutting Edge Length
Cutting Edge Length
- 0.2728 in(1)
- 0.341 in(7)
- 0.433 in(1)
- 0.6495 in(3)
to
Cutting Tool Material
Cutting Tool Material
- B H (102)
- B L (32)
- D P (63)
- H T (123)
- H W (1240)
Back-End
Connection Type
Connection Type
- BORING BAR (115)
- BORING BAR HEAD (7)
- SQUARE SHANK (147)
- TAPER SHANK (17)
System Size
System Size
- KM25 (17)
Back-End Diameter
Back-End Diameter
- 7.9 mm(1)
- 9.5 mm(1)
- 9.525 mm(3)
- 10.0 mm(3)
- 12.0 mm(3)
- 12.7 mm(9)
- 15.87 mm(1)
- 15.875 mm(7)
- 16.0 mm(6)
- 19.05 mm(15)
- 20.0 mm(14)
- 25.0 mm(26)
- 25.4 mm(8)
- 31.75 mm(8)
- 32.0 mm(7)
- 38.1 mm(2)
- 40.0 mm(6)
- 44.45 mm(3)
- 50.0 mm(1)
- 50.8 mm(6)
- 57.15 mm(1)
- 63.5 mm(8)
to
Shank Height
Shank Height
- 0.375 in(4)
- 0.394 in(3)
- 0.472 in(3)
- 0.4724 in(2)
- 0.5 in(8)
- 0.5835 in(2)
- 0.6067 in(2)
- 0.625 in(8)
- 0.6299 in(4)
- 0.63 in(4)
- 0.7409 in(11)
- 0.75 in(16)
- 0.7642 in(1)
- 0.787 in(4)
- 0.7874 in(7)
- 0.9378 in(5)
- 0.961 in(1)
- 0.984 in(6)
- 0.9843 in(15)
- 1.0 in(28)
- 1.2134 in(7)
- 1.25 in(15)
- 1.2598 in(9)
- 1.26 in(7)
- 1.5 in(4)
- 1.5283 in(6)
- 1.8488 in(1)
to
Shank Height
Shank Height
- 9.52 mm(2)
- 9.525 mm(2)
- 10.0 mm(3)
- 12.0 mm(5)
- 12.7 mm(8)
- 14.82 mm(2)
- 15.41 mm(2)
- 15.875 mm(5)
- 15.88 mm(3)
- 16.0 mm(8)
- 18.82 mm(11)
- 19.05 mm(16)
- 19.41 mm(1)
- 20.0 mm(11)
- 23.82 mm(5)
- 24.41 mm(1)
- 25.0 mm(21)
- 25.4 mm(28)
- 30.82 mm(7)
- 31.75 mm(15)
- 32.0 mm(16)
- 38.1 mm(4)
- 38.82 mm(6)
- 46.96 mm(1)
to
Shank Width
Shank Width
- 0.375 in(4)
- 0.394 in(3)
- 0.472 in(3)
- 0.4724 in(2)
- 0.5 in(8)
- 0.625 in(8)
- 0.6299 in(4)
- 0.63 in(4)
- 0.75 in(16)
- 0.787 in(4)
- 0.7874 in(8)
- 0.8646 in(5)
- 0.984 in(9)
- 0.9843 in(14)
- 1.0 in(28)
- 1.1402 in(7)
- 1.25 in(15)
- 1.2598 in(9)
- 1.26 in(4)
- 1.4551 in(6)
- 1.5 in(4)
- 1.8488 in(1)
to
Shank Width
Shank Width
- 9.52 mm(2)
- 9.525 mm(2)
- 10.0 mm(3)
- 12.0 mm(5)
- 12.7 mm(8)
- 15.875 mm(5)
- 15.88 mm(3)
- 16.0 mm(8)
- 19.05 mm(16)
- 20.0 mm(12)
- 21.96 mm(5)
- 25.0 mm(23)
- 25.4 mm(28)
- 28.96 mm(7)
- 31.75 mm(15)
- 32.0 mm(13)
- 36.96 mm(6)
- 38.1 mm(4)
- 46.96 mm(1)
to
No filters matching ""
