DAL Drills • CFRP-Ti-Stacks
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- N Non-Ferrous Materials (5)
- N1Wrought Aluminum (5)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(5)
- N3High-Silicon Aluminum Alloys Si >12.2%(5)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (5)
- S High-Temp Alloys (5)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(5)
- C CFRP Materials (21)
- C2CFRP / Aluminium CFRP / Non-Ferrous (21)
- C3CFRP / Titanium CFRP / High Temp (21)
- C4CFRP / Stainless Steel (21)
Applications
Applications
Convex Drilling (11)
Drilling (21)
Stacked Plates Drilling (21)
Cutting Diameter
Cutting Diameter
- 0.1875 in(2)
- 0.19 in(1)
- 0.1901 in(2)
- 0.2188 in(2)
- 0.25 in(4)
- 0.3125 in(4)
- 0.375 in(4)
- 0.5625 in(2)
to
Cutting Diameter
Cutting Diameter
- 4.763 mm(2)
- 4.826 mm(1)
- 4.828 mm(2)
- 5.558 mm(2)
- 6.35 mm(4)
- 7.938 mm(4)
- 9.525 mm(4)
- 14.288 mm(2)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 20.0 mm(3)
- 24.0 mm(2)
- 27.0 mm(2)
- 29.0 mm(2)
- 30.0 mm(8)
- 35.0 mm(2)
- 45.0 mm(2)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.7874 in(3)
- 0.9449 in(2)
- 1.063 in(2)
- 1.1417 in(2)
- 1.1811 in(8)
- 1.378 in(2)
- 1.7717 in(2)
to
Reach
Reach
- 1.1024 in(3)
- 1.3386 in(2)
- 1.4786 in(2)
- 1.4797 in(1)
- 1.4961 in(5)
- 1.4972 in(1)
- 1.5156 in(1)
- 1.6142 in(2)
- 1.8504 in(2)
- 2.5591 in(2)
to
Reach
Reach
- 28.0 mm(3)
- 34.0 mm(2)
- 38.0 mm(10)
- 41.0 mm(2)
- 47.0 mm(2)
- 65.0 mm(2)
to
Connection Style
Connection Style
- HC Drill Sleeve with Pocket (10)
- Straight-Cylindrical (11)
Over All Length [L]
Over All Length [L]
- 2.5984 in(3)
- 3.1102 in(4)
- 3.1496 in(10)
- 3.5039 in(2)
- 4.5276 in(2)
to
Over All Length [L]
Over All Length [L]
- 66.0 mm(3)
- 79.0 mm(4)
- 80.0 mm(10)
- 89.0 mm(2)
- 115.0 mm(2)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KCC05 (5)
- KDC15 (5)
- KN15 (11)
Front-End
Point Angle
Point Angle
- 128.0 (10)
- 155.0 (11)
to
Back-End
Back-End Diameter
Back-End Diameter
- 6.0 mm(7)
- 8.0 mm(8)
- 10.0 mm(4)
- 16.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.2362 in(7)
- 0.315 in(8)
- 0.3937 in(4)
- 0.6299 in(2)
to
No filters matching ""
