Indexable Inserts
Indexable inserts from Kennametal come in a range of shapes and geometries for several holemaking applications. Choose from specially designed high-precision inserts for better chip control while machining difficult materials to combination tool inserts that are perfect for chamfering and spot-facing in one operation. Kennametal's indexable inserts offer a wide range of options for machining at optimal performance.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (577)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(574)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(574)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(572)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(575)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(574)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(549)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(537)
- M Stainless Steel (568)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(568)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(565)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(541)
- K Cast Iron (493)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(493)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(493)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(493)
- N Non-Ferrous Materials (416)
- N1Wrought Aluminum (412)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(410)
- N3High-Silicon Aluminum Alloys Si >12.2%(300)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (386)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (402)
- N6Carbon, Graphite Composites, CFRP (361)
- N7MMC's (262)
- S High-Temp Alloys (522)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(510)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(507)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(519)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(519)
- H Hardened Materials (102)
- H1Hardened Materials 44-48 HRC(102)
- H2Hardened Materials 48-55 HRC(49)
- H3Hardened Materials 56-60 HRC(36)
- H4Hardened Materials >60 HRC(36)
- C CFRP Materials (33)
- C1CFRP, CFRP / CFRP (17)
- C2CFRP / Aluminium CFRP / Non-Ferrous (16)
Select First Choice
- BR (55)
- CN (231)
- DE (231)
- GB (164)
- IN (124)
- SG (160)
- US (234)
Cutting Condition Material
Cutting Condition Material
- K-All (68)
- K1 (198)
- K2 (204)
- K3 (199)
- M-All (81)
- M1 (220)
- M2 (226)
- M3 (204)
- N-All (17)
- N1 (108)
- N2 (101)
- N3 (101)
- N4 (106)
- N5 (107)
- N6 (91)
- N7 (110)
- P-All (48)
- P0 (237)
- P1 (248)
- P2 (241)
- P3 (241)
- P4 (238)
- P5 (229)
- P6 (229)
- S-All (74)
- S1 (179)
- S2 (179)
- S3 (180)
- S4 (180)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (52)
- Interrupted (227)
- Lightly Interrupted Cut (70)
- Smooth Cut (191)
- Stable (333)
- Unstable (263)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (12)
- 1.0 (26)
- 2.0 (250)
- 3.0 (172)
- 4.0 (182)
- 8.0 (65)
to
Corner Radius
Corner Radius
- 0.002 in(2)
- 0.004 in(9)
- 0.008 in(58)
- 0.016 in(218)
- 0.024 in(6)
- 0.031 in(253)
- 0.033 in(9)
- 0.039 in(24)
- 0.047 in(70)
- 0.063 in(16)
- 0.079 in(10)
to
Corner Radius
Corner Radius
- 0.05 mm(2)
- 0.1 mm(9)
- 0.2 mm(58)
- 0.4 mm(218)
- 0.6 mm(6)
- 0.8 mm(253)
- 0.85 mm(9)
- 1.0 mm(24)
- 1.2 mm(70)
- 1.6 mm(16)
- 2.0 mm(10)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (11)
- K313 (16)
- K68 (2)
- KC5010 (75)
- KC5025 (32)
- KC5410 (14)
- KC7015 (6)
- KC7140 (66)
- KC720 (8)
- KC7215 (38)
- KC7225 (1)
- KC730 (12)
- KC7315 (14)
- KCK05 (3)
- KCK05B (1)
- KCK15B (4)
- KCMS35 (18)
- KCMS40 (15)
- KCP05 (4)
- KCP10 (6)
- KCP10B (6)
- KCP25 (6)
- KCP25B (5)
- KCPK10 (40)
- KCU10 (14)
- KCU25 (112)
- KCU40 (119)
- KD1425 (6)
- KM1 (7)
- KMF (11)
- KT315 (33)
- KT325 (2)
Wiper Insert
Wiper Insert
- N (673)
- Y (34)
Drilling Condition Material
Drilling Condition Material
- K-All (68)
- K1 (198)
- K2 (204)
- K3 (199)
- M-All (81)
- M1 (220)
- M2 (226)
- M3 (204)
- N-All (17)
- N1 (108)
- N2 (101)
- N3 (101)
- N4 (106)
- N5 (107)
- N6 (91)
- N7 (110)
- P-All (48)
- P0 (237)
- P1 (248)
- P2 (241)
- P3 (241)
- P4 (238)
- P5 (229)
- P6 (229)
- S-All (74)
- S1 (179)
- S2 (179)
- S3 (180)
- S4 (180)
Countersunk Angle
Countersunk Angle
- 30.0 (4)
- 41.0 (4)
- 45.0 (18)
to
Front-End
Cutting Width
Cutting Width
- 0.2283 in(1)
- 0.2402 in(1)
- 0.3858 in(2)
to
Cutting Width
Cutting Width
- 5.8 mm(1)
- 6.1 mm(1)
- 9.8 mm(2)
to
Insert Shape
Insert Shape
- B-PARALLELOGRAM 82 (34)
- C-DIAMOND/RHOMBIC 80 (243)
- COUNTERBORE/COUNTERSINK MISC (32)
- D-DIAMOND/RHOMBIC 90 (30)
- S-SQUARE 90 (185)
- T-TRIANGLE 60 (12)
- X-TRIGON 84 (156)
Insert Geometry
Shape
Shape
- B-PARALLELOGRAM 82 (34)
- C-DIAMOND/RHOMBIC 80 (243)
- COUNTERBORE/COUNTERSINK MISC (32)
- D-DIAMOND/RHOMBIC 90 (30)
- S-SQUARE 90 (185)
- T-TRIANGLE 60 (12)
- X-TRIGON 84 (156)
Insert IC Size
Insert IC Size
- 5.0 mm(7)
- 5.42 mm(2)
- 5.56 mm(13)
- 6.0 mm(47)
- 6.35 mm(81)
- 7.8 mm(2)
- 7.937 mm(16)
- 7.94 mm(24)
- 8.0 mm(44)
- 9.52 mm(3)
- 9.525 mm(108)
- 10.0 mm(36)
- 12.0 mm(29)
- 12.7 mm(152)
- 15.0 mm(27)
- 15.73 mm(2)
- 15.732 mm(20)
- 15.875 mm(13)
- 17.59 mm(2)
- 17.6 mm(7)
- 19.05 mm(4)
to
Insert IC Size
Insert IC Size
- 0.1969 in(6)
- 0.197 in(1)
- 0.213 in(2)
- 0.2188 in(13)
- 0.236 in(5)
- 0.2362 in(42)
- 0.25 in(81)
- 0.307 in(2)
- 0.3125 in(40)
- 0.315 in(44)
- 0.375 in(111)
- 0.394 in(34)
- 0.395 in(2)
- 0.472 in(29)
- 0.5 in(152)
- 0.5906 in(10)
- 0.591 in(17)
- 0.619 in(2)
- 0.625 in(33)
- 0.6925 in(2)
- 0.6929 in(3)
- 0.693 in(4)
- 0.75 in(4)
to
Cutting Edge Length
Cutting Edge Length
- 3.31 mm(7)
- 3.97 mm(28)
- 5.19 mm(1)
- 5.29 mm(28)
- 5.417 mm(6)
- 5.42 mm(2)
- 5.646 mm(4)
- 6.207 mm(10)
- 6.21 mm(2)
- 6.35 mm(13)
- 6.448 mm(33)
- 6.45 mm(7)
- 6.459 mm(6)
- 6.472 mm(7)
- 6.52 mm(1)
- 6.62 mm(35)
- 7.797 mm(15)
- 7.8 mm(2)
- 7.84 mm(1)
- 7.937 mm(22)
- 7.94 mm(28)
- 9.38 mm(2)
- 9.382 mm(20)
- 9.525 mm(20)
- 9.63 mm(3)
- 9.672 mm(66)
- 9.83 mm(1)
- 9.92 mm(26)
- 11.0 mm(3)
- 11.53 mm(1)
- 11.63 mm(4)
- 11.64 mm(4)
- 12.557 mm(14)
- 12.56 mm(2)
- 12.7 mm(33)
- 12.896 mm(109)
- 12.9 mm(3)
- 13.75 mm(3)
- 15.73 mm(2)
- 15.732 mm(20)
- 16.12 mm(4)
- 16.5 mm(3)
- 19.344 mm(4)
to
Cutting Edge Length
Cutting Edge Length
- 0.13 in(1)
- 0.1302 in(6)
- 0.156 in(28)
- 0.205 in(1)
- 0.208 in(28)
- 0.213 in(8)
- 0.2223 in(4)
- 0.244 in(12)
- 0.25 in(13)
- 0.2539 in(38)
- 0.254 in(2)
- 0.2543 in(6)
- 0.2548 in(7)
- 0.257 in(1)
- 0.26 in(30)
- 0.2605 in(5)
- 0.307 in(17)
- 0.309 in(1)
- 0.3125 in(22)
- 0.313 in(28)
- 0.369 in(2)
- 0.3694 in(20)
- 0.375 in(20)
- 0.3791 in(3)
- 0.3808 in(59)
- 0.381 in(7)
- 0.387 in(1)
- 0.391 in(26)
- 0.4331 in(3)
- 0.454 in(1)
- 0.458 in(4)
- 0.4582 in(4)
- 0.494 in(2)
- 0.4944 in(14)
- 0.5 in(33)
- 0.5077 in(109)
- 0.5079 in(2)
- 0.508 in(1)
- 0.5413 in(3)
- 0.619 in(22)
- 0.6346 in(4)
- 0.65 in(3)
- 0.7616 in(4)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 11 (5)
- 20 (33)
- 21 (30)
- 22 (4)
- DS (34)
- FF (3)
- FN (29)
- FP (31)
- FW (16)
- GD (49)
- HD (4)
- HP (152)
- HPF (5)
- LD (13)
- LF (71)
- LP (12)
- MD (104)
- MP (7)
- MW (18)
- RP (9)
- UF (4)
Cutting Tool Material
Cutting Tool Material
- D P (6)
- H T (34)
- H W (667)
Tolerance Class
Tolerance Class
- G (154)
- H (12)
- M (142)
- P (68)
Other
Insert Hand
Insert Hand
- N (587)
- R (120)
No filters matching ""
