Toolholders
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (21)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(21)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(21)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(21)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(21)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(21)
- M Stainless Steel (21)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(21)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(21)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(21)
- K Cast Iron (21)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(21)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(21)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(21)
- N Non-Ferrous Materials (21)
- N1Wrought Aluminum (21)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(21)
- N3High-Silicon Aluminum Alloys Si >12.2%(6)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (21)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (21)
- N6Carbon, Graphite Composites, CFRP (21)
- N7MMC's (6)
- S High-Temp Alloys (21)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(21)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(21)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(21)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(21)
- H Hardened Materials (21)
- H1Hardened Materials 44-48 HRC(21)
- H2Hardened Materials 48-55 HRC(21)
- H3Hardened Materials 56-60 HRC(9)
- H4Hardened Materials >60 HRC(9)
Applications
Applications
Face Grooving (21)
Grooving (10)
Multiple Direction Cutting (21)
Profiling (10)
Turning (10)
Cutting Condition Material
Cutting Condition Material
- H-All (21)
- K-All (21)
- M-All (21)
- N-All (21)
- P-All (21)
- S-All (21)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (21)
- Lightly Interrupted Cut (21)
- Smooth Cut (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (9)
- 2.0 (21)
to
Over All Length [L]
Over All Length [L]
- 4.9213 in(3)
- 4.9331 in(7)
- 5.0 in(2)
- 5.9055 in(4)
- 5.9173 in(1)
- 6.0 in(4)
to
Over All Length [L]
Over All Length [L]
- 125.0 mm(3)
- 125.3 mm(7)
- 127.0 mm(2)
- 150.0 mm(4)
- 150.3 mm(1)
- 152.4 mm(4)
to
Corner Radius
Corner Radius
- 0.008 in(13)
- 0.016 in(17)
- 0.031 in(10)
- 0.039 in(4)
- 0.047 in(4)
- 0.048 in(1)
- 0.059 in(7)
- 0.06 in(3)
- 0.063 in(3)
- 0.079 in(3)
- 0.08 in(2)
- 0.094 in(2)
- 0.098 in(3)
- 0.099 in(1)
- 0.118 in(3)
- 0.119 in(3)
- 0.125 in(3)
- 0.156 in(1)
- 0.157 in(1)
- 0.158 in(1)
to
Corner Radius
Corner Radius
- 0.2 mm(13)
- 0.4 mm(17)
- 0.8 mm(10)
- 1.0 mm(4)
- 1.2 mm(4)
- 1.225 mm(1)
- 1.5 mm(7)
- 1.525 mm(3)
- 1.6 mm(3)
- 2.0 mm(3)
- 2.025 mm(2)
- 2.375 mm(2)
- 2.5 mm(3)
- 2.525 mm(1)
- 3.0 mm(3)
- 3.025 mm(3)
- 3.175 mm(3)
- 3.975 mm(1)
- 4.0 mm(1)
- 4.025 mm(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (10)
- KB1630 (9)
- KBH20 (9)
- KC5010 (10)
- KC5025 (10)
- KC9125 (2)
- KCK20 (10)
- KCP10 (10)
- KCP25 (10)
- KCU10 (21)
- KCU10B (21)
- KCU25 (21)
- KCU25B (21)
- KD1405 (6)
- KMS (3)
- KT315 (8)
- KY3500 (10)
- KYS30 (5)
Hand Of Tool
Hand Of Tool
- L (3)
- N (10)
- R (8)
F Dimension
F Dimension
- 19.253 mm(2)
- 20.19 mm(7)
- 25.19 mm(1)
- 25.4 mm(1)
- 25.578 mm(1)
- 27.9 mm(1)
- 30.4 mm(1)
- 30.8 mm(1)
- 33.1 mm(1)
- 35.1 mm(1)
- 35.4 mm(1)
- 38.9 mm(1)
- 39.1 mm(2)
to
F Dimension
F Dimension
- 0.758 in(2)
- 0.7949 in(7)
- 0.9917 in(1)
- 1.0 in(1)
- 1.007 in(1)
- 1.0984 in(1)
- 1.1969 in(1)
- 1.2126 in(1)
- 1.3031 in(1)
- 1.3819 in(1)
- 1.3937 in(1)
- 1.5315 in(1)
- 1.5394 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(2)
- 19.99 mm(1)
- 20.0 mm(1)
- 24.994 mm(1)
- 25.0 mm(4)
- 28.0 mm(1)
- 37.998 mm(1)
- 70.0 mm(3)
- 90.0 mm(2)
- 120.0 mm(5)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.6299 in(2)
- 0.787 in(1)
- 0.7874 in(1)
- 0.984 in(1)
- 0.9843 in(4)
- 1.1024 in(1)
- 1.496 in(1)
- 2.7559 in(3)
- 3.5433 in(2)
- 4.7244 in(5)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.7874 in(2)
- 0.984 in(1)
- 0.9843 in(1)
- 1.378 in(1)
- 1.417 in(1)
- 1.4173 in(3)
- 1.4961 in(1)
- 2.2835 in(1)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(2)
- 24.994 mm(1)
- 25.0 mm(1)
- 35.0 mm(1)
- 35.992 mm(1)
- 36.0 mm(3)
- 38.0 mm(1)
- 58.001 mm(1)
to
Cutting Direction
Cutting Direction
- E (11)
- S (10)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (10)
Front-End
Cutting Width
Cutting Width
- 0.079 in(4)
- 0.084 in(4)
- 0.118 in(7)
- 0.119 in(3)
- 0.12 in(3)
- 0.122 in(3)
- 0.123 in(7)
- 0.125 in(3)
- 0.157 in(3)
- 0.1575 in(2)
- 0.158 in(2)
- 0.161 in(2)
- 0.162 in(3)
- 0.187 in(2)
- 0.1875 in(2)
- 0.197 in(3)
- 0.198 in(1)
- 0.201 in(1)
- 0.202 in(3)
- 0.236 in(3)
- 0.241 in(3)
- 0.25 in(3)
- 0.311 in(1)
- 0.312 in(1)
- 0.313 in(1)
- 0.315 in(1)
- 0.316 in(1)
- 0.32 in(1)
to
Cutting Width
Cutting Width
- 2.0 mm(4)
- 2.13 mm(4)
- 3.0 mm(7)
- 3.05 mm(3)
- 3.1 mm(3)
- 3.11 mm(3)
- 3.12 mm(7)
- 3.13 mm(7)
- 3.175 mm(3)
- 3.18 mm(3)
- 4.0 mm(3)
- 4.1 mm(2)
- 4.11 mm(2)
- 4.12 mm(3)
- 4.76 mm(2)
- 4.762 mm(2)
- 5.0 mm(3)
- 5.1 mm(1)
- 5.12 mm(3)
- 5.13 mm(3)
- 6.0 mm(3)
- 6.12 mm(3)
- 6.13 mm(3)
- 6.35 mm(3)
- 7.937 mm(1)
- 7.938 mm(1)
- 7.94 mm(1)
- 8.0 mm(1)
- 8.12 mm(1)
- 8.13 mm(1)
to
Insert Size
Insert Size
- 2S (4)
- 3 (3)
- 3S (4)
- 4 (2)
- 4S (1)
- 5 (1)
- 5S (2)
- 6 (3)
- 8 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.1969 in(3)
- 0.2756 in(2)
- 0.3543 in(1)
- 0.4331 in(4)
- 0.4724 in(4)
- 0.551 in(2)
- 0.5512 in(3)
- 0.748 in(2)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 5.0 mm(3)
- 7.0 mm(2)
- 9.0 mm(1)
- 11.0 mm(4)
- 12.0 mm(4)
- 13.995 mm(2)
- 14.0 mm(3)
- 18.999 mm(1)
- 19.0 mm(1)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 1.1024 in(1)
- 2.7559 in(3)
- 3.5433 in(2)
- 4.7244 in(5)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 28.0 mm(1)
- 70.0 mm(3)
- 90.0 mm(2)
- 120.0 mm(5)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 38.0 mm(1)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 1.4961 in(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (9)
- B L (9)
- C N (10)
- D P (6)
- H T (8)
- H W (21)
Back-End
Shank Height
Shank Height
- 0.75 in(2)
- 0.7874 in(10)
- 0.9843 in(5)
- 1.0 in(4)
to
Shank Height
Shank Height
- 19.05 mm(2)
- 20.0 mm(10)
- 25.0 mm(5)
- 25.4 mm(4)
to
Shank Width
Shank Width
- 0.75 in(2)
- 0.7874 in(10)
- 0.9843 in(5)
- 1.0 in(4)
to
Shank Width
Shank Width
- 19.05 mm(2)
- 20.0 mm(10)
- 25.0 mm(5)
- 25.4 mm(4)
to
Other
Insert Hand
Insert Hand
- L (5)
- N (21)
- R (5)
No filters matching ""
