Face Grooving
Kennametal provides a full line of face-grooving solutions for your turning operations. The portfolio includes groove and turn inserts for improved hardness and edge retention, boring bars, modular cutting units, and double-ended face grooving tools for producing accurate and consistent cuts, even on difficult materials. Kennametal's face-grooving products offer versatility, innovation, and cutting-edge technology for maximum performance.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (3515)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3515)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(3515)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(3515)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(3515)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(3515)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(3515)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3515)
- M Stainless Steel (3086)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(3086)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(3086)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(3086)
- K Cast Iron (3130)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(3130)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(3110)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(3098)
- N Non-Ferrous Materials (2911)
- N1Wrought Aluminum (2903)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(2710)
- N3High-Silicon Aluminum Alloys Si >12.2%(155)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (2911)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (2718)
- N6Carbon, Graphite Composites, CFRP (2710)
- N7MMC's (69)
- S High-Temp Alloys (3141)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(3141)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(3141)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(3141)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(3117)
- H Hardened Materials (1677)
- H1Hardened Materials 44-48 HRC(1677)
- H2Hardened Materials 48-55 HRC(1445)
- H3Hardened Materials 56-60 HRC(220)
- H4Hardened Materials >60 HRC(220)
Select First Choice
- BR (46)
- CN (229)
- DE (227)
- GB (149)
- IN (126)
- SG (155)
- US (230)
Applications
Applications
Back Boring (622)
Boring (2085)
Cut-Off (870)
Deep Grooving (34)
Drilling (1)
Face Grooving (3470)
Facing (626)
Grooving (3277)
ID Facing (637)
ID Grooving (2566)
ID Thread Turning (69)
Multiple Direction Cutting (239)
OD Thread Turning (127)
Plunge Turning (2290)
Profiling (655)
Turning (1745)
Cutting Length
Cutting Length
- 26.0 mm(1)
- 32.0 mm(3)
to
Cutting Length
Cutting Length
- 1.0236 in(1)
to
Cutting Condition Material
Cutting Condition Material
- H-All (1897)
- K-All (2986)
- M-All (2682)
- N-All (2685)
- P-All (3031)
- S-All (2682)
Type of Thread
Type of Thread
- 60 (187)
- ACME (122)
- API (114)
- API RD (81)
- BSW (78)
- BUTTRESS (182)
- M (40)
- NPT (78)
- STUB ACME (78)
- UN (182)
- UNJ (78)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (2486)
- Lightly Interrupted Cut (2915)
- Smooth Cut (3381)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (12)
- 90.0 (791)
to
Connection Style
Connection Style
- Bolt-On Head (6)
- Boring Bar Shank (90)
- Toolholder (364)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (1321)
- 2.0 (2373)
to
Over All Length [L]
Over All Length [L]
- 1.625 in(6)
- 1.88 in(36)
- 2.037 in(32)
- 2.077 in(31)
- 2.111 in(32)
- 2.155 in(43)
- 2.1654 in(1)
- 2.1917 in(1)
- 2.1949 in(2)
- 2.195 in(48)
- 2.2687 in(21)
- 2.352 in(14)
- 2.4309 in(6)
- 2.431 in(16)
- 2.4311 in(2)
- 2.5 in(4)
- 2.5835 in(1)
- 2.6672 in(7)
- 2.6673 in(11)
- 2.756 in(2)
- 3.15 in(2)
- 3.5 in(4)
- 3.937 in(4)
- 4.0 in(3)
- 4.5 in(36)
- 4.921 in(24)
- 4.9213 in(3)
- 4.9331 in(7)
- 4.967 in(7)
- 5.0 in(18)
- 5.463 in(4)
- 5.508 in(12)
- 5.905 in(1)
- 5.9055 in(7)
- 5.906 in(104)
- 5.915 in(4)
- 5.9173 in(1)
- 5.951 in(9)
- 5.961 in(10)
- 6.0 in(166)
- 6.25 in(4)
- 6.693 in(25)
- 6.703 in(4)
- 6.738 in(6)
- 7.0 in(8)
- 7.079 in(2)
- 7.874 in(12)
- 7.9311 in(7)
- 7.976 in(1)
- 8.0 in(5)
- 8.0118 in(4)
- 9.8425 in(2)
- 9.843 in(4)
- 9.879 in(1)
- 10.0 in(8)
- 11.811 in(8)
- 12.0 in(8)
- 13.7795 in(1)
- 14.0 in(10)
- 16.0 in(10)
to
Over All Length [L]
Over All Length [L]
- 41.275 mm(6)
- 47.75 mm(36)
- 51.75 mm(32)
- 52.746 mm(11)
- 52.75 mm(20)
- 53.62 mm(32)
- 54.75 mm(43)
- 55.0 mm(1)
- 55.67 mm(1)
- 55.75 mm(50)
- 57.6129 mm(2)
- 57.6229 mm(19)
- 59.75 mm(14)
- 61.746 mm(6)
- 61.75 mm(18)
- 63.5 mm(4)
- 65.62 mm(1)
- 67.746 mm(7)
- 67.75 mm(11)
- 70.0 mm(2)
- 80.0 mm(2)
- 88.9 mm(4)
- 100.0 mm(4)
- 101.6 mm(3)
- 114.3 mm(36)
- 125.0 mm(34)
- 125.3 mm(7)
- 127.0 mm(18)
- 138.75 mm(4)
- 139.9 mm(11)
- 139.903 mm(1)
- 150.0 mm(121)
- 150.25 mm(4)
- 150.3 mm(1)
- 151.4 mm(10)
- 152.4 mm(166)
- 158.75 mm(4)
- 170.0 mm(31)
- 170.25 mm(4)
- 177.8 mm(8)
- 179.8 mm(2)
- 200.0 mm(12)
- 201.45 mm(7)
- 202.591 mm(1)
- 203.2 mm(5)
- 203.5 mm(4)
- 250.0 mm(6)
- 250.927 mm(1)
- 254.0 mm(8)
- 300.0 mm(8)
- 304.8 mm(8)
- 350.0 mm(1)
- 355.6 mm(10)
- 406.4 mm(10)
to
Corner Radius
Corner Radius
- 0.002 in(40)
- 0.003 in(192)
- 0.004 in(298)
- 0.005 in(78)
- 0.006 in(125)
- 0.007 in(191)
- 0.008 in(1565)
- 0.009 in(78)
- 0.01 in(178)
- 0.011 in(40)
- 0.012 in(289)
- 0.013 in(198)
- 0.014 in(114)
- 0.016 in(992)
- 0.018 in(114)
- 0.019 in(40)
- 0.02 in(157)
- 0.023 in(313)
- 0.03 in(38)
- 0.031 in(895)
- 0.032 in(7)
- 0.035 in(114)
- 0.039 in(206)
- 0.041 in(41)
- 0.046 in(12)
- 0.047 in(327)
- 0.048 in(10)
- 0.049 in(37)
- 0.059 in(345)
- 0.06 in(41)
- 0.061 in(145)
- 0.062 in(92)
- 0.063 in(435)
- 0.065 in(143)
- 0.069 in(37)
- 0.078 in(93)
- 0.079 in(225)
- 0.08 in(30)
- 0.081 in(120)
- 0.094 in(304)
- 0.096 in(119)
- 0.098 in(180)
- 0.099 in(28)
- 0.1 in(135)
- 0.118 in(122)
- 0.119 in(25)
- 0.12 in(102)
- 0.125 in(193)
- 0.128 in(97)
- 0.156 in(27)
- 0.157 in(27)
- 0.158 in(33)
- 0.159 in(21)
- 0.188 in(6)
- 0.197 in(8)
- 0.198 in(11)
to
Corner Radius
Corner Radius
- 0.05 mm(40)
- 0.075 mm(192)
- 0.1 mm(298)
- 0.125 mm(78)
- 0.15 mm(125)
- 0.175 mm(191)
- 0.2 mm(1565)
- 0.225 mm(78)
- 0.25 mm(178)
- 0.275 mm(40)
- 0.3 mm(289)
- 0.325 mm(198)
- 0.35 mm(114)
- 0.4 mm(992)
- 0.45 mm(114)
- 0.475 mm(40)
- 0.5 mm(157)
- 0.575 mm(313)
- 0.75 mm(38)
- 0.775 mm(209)
- 0.8 mm(686)
- 0.825 mm(7)
- 0.9 mm(114)
- 1.0 mm(206)
- 1.05 mm(41)
- 1.175 mm(12)
- 1.2 mm(327)
- 1.225 mm(10)
- 1.25 mm(37)
- 1.5 mm(345)
- 1.525 mm(41)
- 1.55 mm(145)
- 1.575 mm(92)
- 1.6 mm(435)
- 1.65 mm(143)
- 1.75 mm(37)
- 1.975 mm(93)
- 2.0 mm(225)
- 2.025 mm(30)
- 2.05 mm(120)
- 2.375 mm(145)
- 2.4 mm(159)
- 2.45 mm(119)
- 2.5 mm(180)
- 2.525 mm(28)
- 2.55 mm(135)
- 3.0 mm(122)
- 3.025 mm(25)
- 3.05 mm(102)
- 3.175 mm(193)
- 3.25 mm(97)
- 3.95 mm(19)
- 3.975 mm(8)
- 4.0 mm(27)
- 4.025 mm(33)
- 4.05 mm(21)
- 4.775 mm(6)
- 5.0 mm(8)
- 5.025 mm(11)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(3314)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(3314)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (822)
- K420 (206)
- K68 (303)
- KB1630 (214)
- KBH20 (126)
- KC5010 (537)
- KC5025 (570)
- KC5410 (112)
- KC720 (213)
- KC730 (409)
- KC850 (328)
- KC9110 (19)
- KC9125 (20)
- KCK20 (248)
- KCK20B (702)
- KCM35B (365)
- KCP10 (143)
- KCP10B (762)
- KCP25 (144)
- KCP25B (818)
- KCS10B (365)
- KCU10 (1196)
- KCU10B (1018)
- KCU25 (1322)
- KCU25B (1053)
- KD1405 (69)
- KD1425 (86)
- KMS (29)
- KT315 (233)
- KY3500 (98)
- KYS30 (41)
Hand Of Tool
Hand Of Tool
- L (207)
- N (10)
- R (243)
Wiper Insert
Wiper Insert
- N (3505)
Drilling Condition Material
Drilling Condition Material
- H-All (1103)
- K-All (2189)
- M-All (1885)
- N-All (1887)
- P-All (2234)
- S-All (1884)
F Dimension
F Dimension
- 6.553 mm(2)
- 7.0 mm(2)
- 8.17 mm(1)
- 8.23 mm(2)
- 9.52 mm(2)
- 9.76 mm(1)
- 10.0 mm(1)
- 10.23 mm(1)
- 10.24 mm(1)
- 10.312 mm(1)
- 10.785 mm(1)
- 10.973 mm(2)
- 11.0 mm(4)
- 11.1 mm(2)
- 12.0 mm(1)
- 12.573 mm(2)
- 12.7 mm(6)
- 12.73 mm(3)
- 12.75 mm(4)
- 12.95 mm(4)
- 13.0 mm(2)
- 13.03 mm(2)
- 14.0 mm(2)
- 14.148 mm(2)
- 14.27 mm(1)
- 14.275 mm(3)
- 15.875 mm(2)
- 15.88 mm(2)
- 16.0 mm(4)
- 16.125 mm(2)
- 16.25 mm(2)
- 16.256 mm(2)
- 17.0 mm(4)
- 17.348 mm(2)
- 17.475 mm(2)
- 17.48 mm(2)
- 19.05 mm(2)
- 19.2 mm(5)
- 19.203 mm(1)
- 19.205 mm(1)
- 19.207 mm(1)
- 19.21 mm(11)
- 19.2106 mm(1)
- 19.253 mm(2)
- 19.3 mm(2)
- 19.431 mm(1)
- 20.0 mm(2)
- 20.178 mm(2)
- 20.179 mm(1)
- 20.18 mm(5)
- 20.181 mm(7)
- 20.182 mm(3)
- 20.183 mm(2)
- 20.19 mm(7)
- 20.25 mm(2)
- 22.0 mm(2)
- 22.225 mm(3)
- 22.61 mm(2)
- 25.0 mm(6)
- 25.18 mm(26)
- 25.182 mm(2)
- 25.183 mm(3)
- 25.184 mm(5)
- 25.185 mm(12)
- 25.19 mm(18)
- 25.2 mm(2)
- 25.204 mm(2)
- 25.206 mm(1)
- 25.21 mm(18)
- 25.2106 mm(1)
- 25.4 mm(12)
- 25.54 mm(1)
- 25.55 mm(8)
- 25.557 mm(1)
- 25.558 mm(2)
- 25.559 mm(5)
- 25.56 mm(52)
- 25.578 mm(2)
- 25.58 mm(19)
- 25.581 mm(2)
- 25.585 mm(1)
- 27.0 mm(4)
- 27.9 mm(1)
- 28.575 mm(1)
- 30.4 mm(1)
- 30.8 mm(1)
- 31.75 mm(23)
- 31.91 mm(8)
- 31.93 mm(4)
- 31.933 mm(1)
- 31.934 mm(1)
- 31.935 mm(2)
- 32.0 mm(11)
- 32.15 mm(4)
- 32.16 mm(4)
- 32.18 mm(8)
- 32.537 mm(2)
- 33.1 mm(1)
- 34.925 mm(4)
- 35.0 mm(1)
- 35.1 mm(1)
- 35.4 mm(1)
- 38.1 mm(16)
- 38.9 mm(1)
- 39.1 mm(2)
- 40.0 mm(4)
- 41.275 mm(4)
- 50.8 mm(4)
to
F Dimension
F Dimension
- 0.258 in(2)
- 0.276 in(2)
- 0.3217 in(1)
- 0.324 in(2)
- 0.375 in(2)
- 0.3843 in(1)
- 0.394 in(1)
- 0.4028 in(1)
- 0.4031 in(1)
- 0.406 in(1)
- 0.4281 in(1)
- 0.432 in(2)
- 0.433 in(4)
- 0.437 in(2)
- 0.472 in(1)
- 0.495 in(2)
- 0.5 in(6)
- 0.5012 in(3)
- 0.502 in(4)
- 0.51 in(4)
- 0.512 in(2)
- 0.513 in(2)
- 0.551 in(2)
- 0.557 in(2)
- 0.562 in(4)
- 0.625 in(4)
- 0.63 in(4)
- 0.635 in(2)
- 0.64 in(4)
- 0.669 in(4)
- 0.683 in(2)
- 0.688 in(4)
- 0.75 in(2)
- 0.756 in(17)
- 0.7561 in(2)
- 0.7562 in(1)
- 0.758 in(2)
- 0.76 in(2)
- 0.765 in(1)
- 0.787 in(2)
- 0.794 in(3)
- 0.7944 in(3)
- 0.7945 in(7)
- 0.7946 in(5)
- 0.7949 in(7)
- 0.795 in(2)
- 0.797 in(2)
- 0.8661 in(2)
- 0.875 in(3)
- 0.89 in(2)
- 0.984 in(6)
- 0.991 in(20)
- 0.9914 in(3)
- 0.9915 in(17)
- 0.9917 in(1)
- 0.992 in(34)
- 0.9923 in(2)
- 0.9924 in(1)
- 0.9925 in(1)
- 0.993 in(10)
- 0.995 in(1)
- 1.0 in(12)
- 1.006 in(61)
- 1.0062 in(2)
- 1.0063 in(4)
- 1.007 in(21)
- 1.0071 in(2)
- 1.0073 in(2)
- 1.063 in(4)
- 1.0984 in(1)
- 1.125 in(1)
- 1.1969 in(1)
- 1.2126 in(1)
- 1.25 in(23)
- 1.256 in(8)
- 1.257 in(4)
- 1.2572 in(2)
- 1.2573 in(2)
- 1.2598 in(2)
- 1.26 in(9)
- 1.266 in(8)
- 1.2669 in(2)
- 1.267 in(6)
- 1.281 in(2)
- 1.3031 in(1)
- 1.3363 in(1)
- 1.375 in(4)
- 1.378 in(1)
- 1.3819 in(1)
- 1.3937 in(1)
- 1.5 in(16)
- 1.5315 in(1)
- 1.5394 in(2)
- 1.575 in(4)
- 1.625 in(4)
- 2.0 in(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(147)
- 11.176 mm(1)
- 11.18 mm(1)
- 11.5 mm(2)
- 16.0 mm(4)
- 17.0 mm(3)
- 18.5 mm(2)
- 18.542 mm(4)
- 19.99 mm(1)
- 20.0 mm(5)
- 20.32 mm(1)
- 21.0 mm(3)
- 22.0 mm(3)
- 24.994 mm(1)
- 25.0 mm(9)
- 25.4 mm(4)
- 26.0 mm(11)
- 28.0 mm(1)
- 28.575 mm(3)
- 28.58 mm(1)
- 30.0 mm(8)
- 33.0 mm(4)
- 34.0 mm(4)
- 34.92 mm(2)
- 34.925 mm(4)
- 35.0 mm(8)
- 36.0 mm(5)
- 37.998 mm(1)
- 38.1 mm(4)
- 40.0 mm(17)
- 41.0 mm(4)
- 41.3 mm(57)
- 42.0 mm(5)
- 44.0 mm(2)
- 44.45 mm(2)
- 47.6 mm(56)
- 48.0 mm(3)
- 50.0 mm(34)
- 50.8 mm(2)
- 52.0 mm(3)
- 54.0 mm(4)
- 55.88 mm(3)
- 56.625 mm(49)
- 57.15 mm(6)
- 57.2 mm(29)
- 58.0 mm(4)
- 60.0 mm(56)
- 60.325 mm(4)
- 63.5 mm(22)
- 64.0 mm(4)
- 68.0 mm(4)
- 69.85 mm(4)
- 70.0 mm(8)
- 75.0 mm(59)
- 76.2 mm(8)
- 80.0 mm(11)
- 82.55 mm(4)
- 88.9 mm(534)
- 90.0 mm(8)
- 92.0 mm(3)
- 100.0 mm(73)
- 120.0 mm(13)
- 127.0 mm(1)
- 130.0 mm(4)
- 132.0 mm(4)
- 139.7 mm(727)
- 146.05 mm(3)
- 174.6 mm(125)
- 180.0 mm(72)
- 184.0 mm(3)
- 200.0 mm(8)
- 209.6 mm(233)
- 222.3 mm(58)
- 250.0 mm(72)
- 290.0 mm(8)
- 333.0 mm(4)
- 350.0 mm(66)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(147)
- 0.44 in(2)
- 0.453 in(2)
- 0.6299 in(4)
- 0.6693 in(3)
- 0.728 in(2)
- 0.73 in(4)
- 0.787 in(1)
- 0.7874 in(5)
- 0.8 in(1)
- 0.8268 in(3)
- 0.866 in(2)
- 0.8661 in(1)
- 0.984 in(1)
- 0.9843 in(9)
- 1.0 in(4)
- 1.02 in(1)
- 1.0236 in(5)
- 1.024 in(5)
- 1.1024 in(1)
- 1.125 in(4)
- 1.177 in(1)
- 1.181 in(7)
- 1.299 in(4)
- 1.339 in(4)
- 1.375 in(6)
- 1.378 in(8)
- 1.4173 in(5)
- 1.496 in(1)
- 1.5 in(4)
- 1.5748 in(1)
- 1.575 in(16)
- 1.61 in(1)
- 1.614 in(3)
- 1.626 in(57)
- 1.6535 in(5)
- 1.7323 in(2)
- 1.75 in(2)
- 1.874 in(56)
- 1.8898 in(3)
- 1.9685 in(6)
- 1.969 in(28)
- 2.0 in(2)
- 2.0472 in(3)
- 2.126 in(4)
- 2.2 in(3)
- 2.229 in(49)
- 2.25 in(6)
- 2.252 in(29)
- 2.2835 in(4)
- 2.362 in(48)
- 2.3622 in(8)
- 2.375 in(4)
- 2.5 in(22)
- 2.5197 in(4)
- 2.6772 in(4)
- 2.75 in(4)
- 2.7559 in(8)
- 2.9528 in(7)
- 2.953 in(52)
- 3.0 in(8)
- 3.1496 in(7)
- 3.15 in(4)
- 3.25 in(4)
- 3.5 in(534)
- 3.5433 in(8)
- 3.622 in(3)
- 3.937 in(73)
- 4.7244 in(13)
- 5.0 in(1)
- 5.1181 in(4)
- 5.1969 in(4)
- 5.5 in(727)
- 5.75 in(3)
- 6.874 in(125)
- 7.0866 in(5)
- 7.087 in(67)
- 7.2441 in(3)
- 7.874 in(8)
- 8.252 in(233)
- 8.752 in(58)
- 9.8425 in(10)
- 9.843 in(62)
- 11.4173 in(8)
- 13.11 in(4)
- 13.7795 in(3)
- 13.78 in(63)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.7874 in(4)
- 0.8268 in(3)
- 0.9055 in(1)
- 0.984 in(1)
- 0.9843 in(5)
- 1.0236 in(2)
- 1.028 in(1)
- 1.181 in(3)
- 1.185 in(1)
- 1.378 in(9)
- 1.417 in(1)
- 1.4173 in(12)
- 1.4961 in(1)
- 1.575 in(8)
- 1.618 in(1)
- 1.654 in(4)
- 1.811 in(1)
- 1.8898 in(4)
- 1.9685 in(1)
- 1.969 in(19)
- 2.126 in(2)
- 2.2835 in(4)
- 2.362 in(30)
- 2.3622 in(1)
- 2.5197 in(3)
- 2.8346 in(3)
- 2.9134 in(3)
- 2.9528 in(4)
- 2.953 in(46)
- 3.3071 in(4)
- 3.7008 in(4)
- 3.937 in(67)
- 4.4094 in(4)
- 4.8819 in(3)
- 5.3543 in(4)
- 5.9055 in(3)
- 6.2992 in(4)
- 7.0866 in(7)
- 7.087 in(66)
- 7.874 in(2)
- 8.3465 in(4)
- 9.8425 in(5)
- 9.843 in(63)
- 10.0 in(4)
- 11.811 in(12)
- 13.7795 in(4)
- 13.78 in(62)
- 39.3307 in(14)
- 39.331 in(67)
- 393.661 in(1819)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(4)
- 21.0 mm(3)
- 23.0 mm(1)
- 24.994 mm(1)
- 25.0 mm(5)
- 26.0 mm(2)
- 30.0 mm(4)
- 35.0 mm(10)
- 35.992 mm(1)
- 36.0 mm(12)
- 38.0 mm(1)
- 40.0 mm(8)
- 42.0 mm(4)
- 46.0 mm(1)
- 48.0 mm(4)
- 50.0 mm(21)
- 54.0 mm(2)
- 58.0 mm(3)
- 58.001 mm(1)
- 60.0 mm(31)
- 64.0 mm(3)
- 72.0 mm(3)
- 74.0 mm(3)
- 75.0 mm(50)
- 84.0 mm(4)
- 94.0 mm(4)
- 100.0 mm(67)
- 112.0 mm(4)
- 124.0 mm(3)
- 136.0 mm(4)
- 150.0 mm(3)
- 160.0 mm(4)
- 180.0 mm(73)
- 200.0 mm(2)
- 212.0 mm(4)
- 250.0 mm(68)
- 254.0 mm(4)
- 300.0 mm(12)
- 350.0 mm(66)
- 999.0 mm(81)
- 9999.0 mm(1819)
to
Countersunk Angle
Countersunk Angle
- 20.0 (3)
- 45.0 (7)
to
Cutting Direction
Cutting Direction
- E (378)
- S (82)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (236)
- NEUTRAL (ZERO) (169)
Maximum Bore Depth
Maximum Bore Depth
- 1.0 in(10)
- 1.231 in(1)
- 1.235 in(1)
- 1.29 in(1)
- 1.5 in(1)
- 1.88 in(2)
- 2.0 in(25)
- 2.5 in(4)
- 2.5196 in(2)
- 2.52 in(2)
- 3.0 in(5)
- 3.1496 in(2)
- 3.16 in(2)
- 3.75 in(2)
- 3.7758 in(1)
- 3.92 in(2)
- 3.936 in(5)
- 3.9372 in(3)
- 3.94 in(1)
- 4.0 in(12)
- 4.5 in(2)
- 5.0 in(5)
- 5.0392 in(2)
- 5.04 in(2)
- 6.0 in(8)
- 6.2992 in(4)
- 6.3 in(2)
- 7.0 in(3)
- 7.874 in(1)
- 8.0 in(8)
- 9.0 in(1)
- 10.0 in(7)
to
Maximum Bore Depth
Maximum Bore Depth
- 25.4 mm(10)
- 31.26 mm(1)
- 31.3 mm(1)
- 32.8 mm(1)
- 38.1 mm(1)
- 48.0 mm(2)
- 50.8 mm(25)
- 63.48 mm(1)
- 63.5 mm(3)
- 64.0 mm(4)
- 76.2 mm(5)
- 80.0 mm(4)
- 95.25 mm(2)
- 96.0 mm(1)
- 100.0 mm(11)
- 101.6 mm(12)
- 114.3 mm(2)
- 127.0 mm(5)
- 128.0 mm(4)
- 152.4 mm(8)
- 160.0 mm(6)
- 177.8 mm(3)
- 200.0 mm(1)
- 203.2 mm(8)
- 228.6 mm(1)
- 254.0 mm(7)
to
Boring Bar Material
Boring Bar Material
- C (9)
- S (87)
Front-End
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (79)
- SQUARE SHANK ADAPTER (20)
Clamp Style
Clamp Style
- N (197)
- Y (441)
Cutting Width
Cutting Width
- 0.0197 in(76)
- 0.031 in(117)
- 0.0315 in(80)
- 0.035 in(37)
- 0.039 in(70)
- 0.0394 in(176)
- 0.041 in(83)
- 0.047 in(218)
- 0.0472 in(170)
- 0.055 in(71)
- 0.0551 in(82)
- 0.058 in(75)
- 0.059 in(11)
- 0.0591 in(171)
- 0.062 in(325)
- 0.063 in(12)
- 0.0669 in(82)
- 0.067 in(70)
- 0.0689 in(160)
- 0.072 in(101)
- 0.076 in(33)
- 0.0768 in(79)
- 0.077 in(33)
- 0.078 in(128)
- 0.0787 in(204)
- 0.0788 in(4)
- 0.079 in(187)
- 0.083 in(10)
- 0.084 in(91)
- 0.0866 in(158)
- 0.088 in(176)
- 0.0886 in(121)
- 0.094 in(321)
- 0.097 in(87)
- 0.098 in(8)
- 0.0984 in(175)
- 0.099 in(16)
- 0.103 in(5)
- 0.105 in(91)
- 0.108 in(69)
- 0.1083 in(169)
- 0.11 in(85)
- 0.118 in(350)
- 0.1181 in(369)
- 0.119 in(30)
- 0.12 in(31)
- 0.122 in(129)
- 0.123 in(276)
- 0.125 in(652)
- 0.126 in(120)
- 0.1278 in(75)
- 0.128 in(87)
- 0.129 in(32)
- 0.13 in(169)
- 0.131 in(43)
- 0.1378 in(162)
- 0.142 in(87)
- 0.147 in(42)
- 0.151 in(75)
- 0.156 in(127)
- 0.157 in(235)
- 0.1574 in(187)
- 0.1575 in(282)
- 0.158 in(156)
- 0.161 in(172)
- 0.162 in(225)
- 0.167 in(37)
- 0.1673 in(87)
- 0.1772 in(123)
- 0.178 in(80)
- 0.185 in(83)
- 0.187 in(169)
- 0.1875 in(138)
- 0.188 in(161)
- 0.189 in(222)
- 0.192 in(188)
- 0.193 in(43)
- 0.195 in(83)
- 0.196 in(84)
- 0.1968 in(127)
- 0.1969 in(49)
- 0.197 in(212)
- 0.198 in(17)
- 0.201 in(29)
- 0.202 in(232)
- 0.213 in(39)
- 0.2165 in(19)
- 0.2166 in(20)
- 0.236 in(145)
- 0.2362 in(141)
- 0.241 in(203)
- 0.25 in(288)
- 0.255 in(115)
- 0.256 in(42)
- 0.276 in(94)
- 0.281 in(97)
- 0.2881 in(89)
- 0.311 in(7)
- 0.312 in(43)
- 0.313 in(8)
- 0.315 in(51)
- 0.316 in(7)
- 0.317 in(28)
- 0.3199 in(12)
- 0.32 in(86)
- 0.375 in(25)
- 0.381 in(5)
- 0.384 in(9)
- 0.394 in(21)
- 0.399 in(44)
to
Cutting Width
Cutting Width
- 0.5 mm(76)
- 0.787 mm(117)
- 0.8 mm(80)
- 0.889 mm(37)
- 0.991 mm(70)
- 1.0 mm(176)
- 1.041 mm(83)
- 1.19 mm(121)
- 1.194 mm(203)
- 1.2 mm(170)
- 1.39 mm(70)
- 1.397 mm(37)
- 1.4 mm(82)
- 1.473 mm(75)
- 1.49 mm(2)
- 1.5 mm(180)
- 1.57 mm(146)
- 1.575 mm(289)
- 1.6 mm(12)
- 1.69 mm(36)
- 1.7 mm(82)
- 1.702 mm(70)
- 1.75 mm(160)
- 1.829 mm(101)
- 1.94 mm(33)
- 1.95 mm(79)
- 1.956 mm(33)
- 1.981 mm(104)
- 1.99 mm(24)
- 2.0 mm(277)
- 2.007 mm(70)
- 2.12 mm(15)
- 2.125 mm(17)
- 2.13 mm(69)
- 2.2 mm(158)
- 2.235 mm(135)
- 2.236 mm(47)
- 2.24 mm(70)
- 2.25 mm(121)
- 2.38 mm(2)
- 2.387 mm(61)
- 2.388 mm(290)
- 2.39 mm(50)
- 2.464 mm(87)
- 2.49 mm(2)
- 2.5 mm(181)
- 2.51 mm(10)
- 2.511 mm(10)
- 2.62 mm(5)
- 2.667 mm(91)
- 2.74 mm(32)
- 2.743 mm(37)
- 2.75 mm(169)
- 2.794 mm(85)
- 2.997 mm(118)
- 3.0 mm(470)
- 3.05 mm(31)
- 3.099 mm(81)
- 3.1 mm(43)
- 3.11 mm(40)
- 3.12 mm(78)
- 3.125 mm(170)
- 3.13 mm(63)
- 3.17 mm(92)
- 3.175 mm(621)
- 3.177 mm(137)
- 3.18 mm(92)
- 3.2 mm(120)
- 3.245 mm(75)
- 3.25 mm(86)
- 3.251 mm(41)
- 3.27 mm(32)
- 3.3 mm(137)
- 3.301 mm(144)
- 3.302 mm(152)
- 3.32 mm(42)
- 3.329 mm(41)
- 3.5 mm(162)
- 3.607 mm(87)
- 3.73 mm(42)
- 3.835 mm(37)
- 3.84 mm(74)
- 3.96 mm(90)
- 3.962 mm(111)
- 3.974 mm(44)
- 3.988 mm(80)
- 4.0 mm(341)
- 4.094 mm(132)
- 4.1 mm(40)
- 4.11 mm(24)
- 4.12 mm(75)
- 4.125 mm(146)
- 4.242 mm(37)
- 4.25 mm(87)
- 4.5 mm(123)
- 4.521 mm(80)
- 4.699 mm(83)
- 4.75 mm(125)
- 4.76 mm(142)
- 4.762 mm(147)
- 4.763 mm(107)
- 4.775 mm(148)
- 4.78 mm(21)
- 4.785 mm(21)
- 4.788 mm(24)
- 4.8 mm(90)
- 4.801 mm(210)
- 4.873 mm(113)
- 4.877 mm(125)
- 4.878 mm(120)
- 4.88 mm(44)
- 4.9 mm(43)
- 4.95 mm(80)
- 4.953 mm(43)
- 4.978 mm(84)
- 5.0 mm(248)
- 5.004 mm(19)
- 5.1 mm(29)
- 5.12 mm(53)
- 5.125 mm(161)
- 5.13 mm(36)
- 5.41 mm(39)
- 5.5 mm(39)
- 6.0 mm(197)
- 6.12 mm(43)
- 6.125 mm(126)
- 6.13 mm(49)
- 6.346 mm(96)
- 6.35 mm(278)
- 6.36 mm(22)
- 6.473 mm(92)
- 6.477 mm(96)
- 6.478 mm(105)
- 6.502 mm(42)
- 7.0 mm(94)
- 7.125 mm(95)
- 7.137 mm(2)
- 7.317 mm(89)
- 7.92 mm(15)
- 7.925 mm(24)
- 7.937 mm(10)
- 7.938 mm(8)
- 7.94 mm(8)
- 8.0 mm(53)
- 8.051 mm(13)
- 8.052 mm(23)
- 8.12 mm(14)
- 8.125 mm(45)
- 8.13 mm(37)
- 9.525 mm(23)
- 9.53 mm(6)
- 9.677 mm(5)
- 9.754 mm(9)
- 10.0 mm(21)
- 10.125 mm(12)
- 10.13 mm(32)
to
Front End Type
Front End Type
- MCS - Modular Cartridge System (79)
- VKT - Square Shank (20)
Insert Shape
Insert Shape
- PRISMATIC (1986)
- TN-TOP NOTCH (1825)
Cartridge Size
Cartridge Size
- 50 (250)
- 65 (54)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (79)
- VKT01 Std Design (20)
Insert Size
Insert Size
- 1 (5)
- 2 (45)
- 2S (11)
- 3 (122)
- 3S (8)
- 4 (71)
- 4S (1)
- 5 (73)
- 5S (2)
- 6 (69)
- 8 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.04 in(1)
- 0.063 in(2)
- 0.067 in(1)
- 0.07 in(2)
- 0.075 in(1)
- 0.13 in(1)
- 0.138 in(39)
- 0.1382 in(1)
- 0.1969 in(3)
- 0.21 in(39)
- 0.25 in(2)
- 0.2756 in(2)
- 0.294 in(23)
- 0.3 in(1)
- 0.334 in(4)
- 0.3543 in(1)
- 0.415 in(2)
- 0.4151 in(1)
- 0.4331 in(4)
- 0.472 in(84)
- 0.4724 in(39)
- 0.473 in(6)
- 0.551 in(3)
- 0.5512 in(55)
- 0.6299 in(1)
- 0.63 in(112)
- 0.748 in(17)
- 0.787 in(103)
- 0.7874 in(2)
- 0.788 in(1)
- 0.9449 in(21)
- 1.0236 in(8)
- 1.024 in(92)
- 1.2597 in(2)
- 1.2598 in(17)
- 1.26 in(32)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 1.016 mm(1)
- 1.6 mm(2)
- 1.69 mm(1)
- 1.78 mm(2)
- 1.9 mm(1)
- 3.3 mm(1)
- 3.505 mm(21)
- 3.51 mm(19)
- 5.0 mm(3)
- 5.33 mm(16)
- 5.334 mm(23)
- 6.35 mm(2)
- 7.0 mm(2)
- 7.46 mm(8)
- 7.468 mm(9)
- 7.47 mm(6)
- 7.62 mm(1)
- 8.484 mm(4)
- 9.0 mm(1)
- 10.54 mm(1)
- 10.541 mm(1)
- 10.543 mm(1)
- 11.0 mm(4)
- 12.0 mm(129)
- 13.995 mm(2)
- 14.0 mm(56)
- 16.0 mm(113)
- 18.999 mm(1)
- 19.0 mm(16)
- 20.0 mm(106)
- 24.0 mm(21)
- 26.0 mm(100)
- 31.996 mm(2)
- 32.0 mm(49)
to
Gage Length
Gage Length
- 22.0000 in(12)
- 28.0000 in(2)
- 33.0000 in(2)
- 38.0000 in(2)
- 43.0000 in(2)
- 47.0000 in(6)
- 48.0000 in(6)
- 49.0000 in(4)
- 53.5000 in(4)
- 55.5000 in(2)
- 57.0000 in(6)
- 58.0000 in(6)
- 58.5000 in(7)
- 60.5000 in(2)
- 63.5000 in(14)
- 65.5000 in(2)
- 66.5000 in(4)
- 68.5000 in(4)
- 73.5000 in(4)
- 138.1500 in(3)
- 138.7500 in(4)
- 139.2500 in(4)
- 139.9000 in(11)
- 139.9030 in(1)
- 140.4000 in(10)
- 140.5500 in(7)
- 150.0000 in(4)
- 152.4000 in(8)
- 158.1500 in(2)
- 158.7500 in(4)
- 159.2500 in(4)
- 165.9500 in(2)
- 170.0000 in(3)
- 177.8000 in(4)
Gage Length
Gage Length
- 22.0000 mm(12)
- 28.0000 mm(2)
- 33.0000 mm(2)
- 38.0000 mm(2)
- 43.0000 mm(2)
- 47.0000 mm(6)
- 48.0000 mm(6)
- 49.0000 mm(4)
- 53.5000 mm(4)
- 55.5000 mm(2)
- 57.0000 mm(6)
- 58.0000 mm(6)
- 58.5000 mm(7)
- 60.5000 mm(2)
- 63.5000 mm(14)
- 65.5000 mm(2)
- 66.5000 mm(4)
- 68.5000 mm(4)
- 73.5000 mm(4)
- 138.1500 mm(3)
- 138.7500 mm(4)
- 139.2500 mm(4)
- 139.9000 mm(11)
- 139.9030 mm(1)
- 140.4000 mm(10)
- 140.5500 mm(7)
- 150.0000 mm(4)
- 152.4000 mm(8)
- 158.1500 mm(2)
- 158.7500 mm(4)
- 159.2500 mm(4)
- 165.9500 mm(2)
- 170.0000 mm(3)
- 177.8000 mm(4)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.64 mm(8)
- 0.76 mm(15)
- 0.762 mm(108)
- 1.015 mm(6)
- 1.016 mm(210)
- 1.02 mm(4)
- 1.09 mm(37)
- 1.092 mm(127)
- 1.335 mm(11)
- 1.64 mm(2)
- 1.65 mm(6)
- 1.76 mm(6)
- 1.9 mm(13)
- 1.905 mm(6)
- 1.97 mm(4)
- 1.981 mm(4)
- 2.0 mm(40)
- 2.48 mm(7)
- 2.5 mm(3)
- 2.54 mm(7)
- 2.58 mm(8)
- 2.73 mm(6)
- 2.75 mm(5)
- 2.777 mm(2)
- 2.9 mm(18)
- 2.92 mm(40)
- 2.921 mm(88)
- 3.0 mm(20)
- 3.3 mm(12)
- 3.4 mm(56)
- 3.41 mm(12)
- 3.45 mm(8)
- 3.5 mm(40)
- 3.51 mm(5)
- 3.52 mm(6)
- 3.6 mm(6)
- 3.8 mm(7)
- 3.81 mm(47)
- 3.84 mm(4)
- 3.86 mm(3)
- 4.07 mm(7)
- 4.1 mm(14)
- 4.15 mm(8)
- 4.2 mm(55)
- 4.4 mm(11)
- 4.5 mm(18)
- 4.6 mm(1)
- 4.74 mm(10)
- 4.8 mm(7)
- 4.9 mm(54)
- 5.0 mm(1)
- 5.3 mm(6)
- 5.9 mm(12)
- 6.0 mm(22)
- 6.1 mm(6)
- 6.24 mm(4)
- 6.35 mm(2)
- 6.4 mm(27)
- 6.5 mm(8)
- 7.3 mm(2)
- 7.94 mm(5)
- 8.1 mm(13)
- 8.2 mm(5)
to
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.025 in(8)
- 0.03 in(123)
- 0.04 in(220)
- 0.043 in(164)
- 0.0526 in(11)
- 0.064 in(2)
- 0.065 in(6)
- 0.069 in(6)
- 0.075 in(19)
- 0.078 in(8)
- 0.079 in(40)
- 0.097 in(1)
- 0.098 in(9)
- 0.1 in(7)
- 0.101 in(8)
- 0.108 in(11)
- 0.1093 in(2)
- 0.115 in(146)
- 0.118 in(20)
- 0.13 in(12)
- 0.132 in(4)
- 0.133 in(1)
- 0.134 in(63)
- 0.136 in(8)
- 0.138 in(51)
- 0.143 in(6)
- 0.148 in(1)
- 0.149 in(6)
- 0.15 in(47)
- 0.151 in(4)
- 0.152 in(3)
- 0.159 in(2)
- 0.16 in(7)
- 0.162 in(6)
- 0.163 in(14)
- 0.164 in(1)
- 0.165 in(54)
- 0.173 in(1)
- 0.175 in(10)
- 0.177 in(18)
- 0.182 in(1)
- 0.187 in(10)
- 0.188 in(1)
- 0.189 in(6)
- 0.192 in(11)
- 0.193 in(35)
- 0.194 in(8)
- 0.196 in(1)
- 0.208 in(6)
- 0.234 in(12)
- 0.235 in(4)
- 0.236 in(18)
- 0.238 in(3)
- 0.241 in(3)
- 0.246 in(4)
- 0.25 in(2)
- 0.251 in(6)
- 0.252 in(19)
- 0.254 in(2)
- 0.256 in(8)
- 0.289 in(2)
- 0.312 in(5)
- 0.319 in(13)
- 0.322 in(5)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 1.02 in(1)
- 1.024 in(3)
- 1.1024 in(1)
- 1.177 in(1)
- 1.181 in(7)
- 1.299 in(4)
- 1.378 in(4)
- 1.575 in(8)
- 1.61 in(1)
- 1.614 in(3)
- 1.969 in(16)
- 2.362 in(32)
- 2.7559 in(3)
- 2.953 in(32)
- 3.5433 in(2)
- 3.937 in(40)
- 4.7244 in(5)
- 7.0866 in(1)
- 7.087 in(39)
- 9.843 in(38)
- 13.78 in(39)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 26.0 mm(4)
- 28.0 mm(1)
- 30.0 mm(8)
- 33.0 mm(4)
- 35.0 mm(4)
- 40.0 mm(8)
- 41.0 mm(4)
- 50.0 mm(16)
- 60.0 mm(32)
- 70.0 mm(3)
- 75.0 mm(32)
- 90.0 mm(2)
- 100.0 mm(40)
- 120.0 mm(5)
- 180.0 mm(40)
- 250.0 mm(38)
- 350.0 mm(39)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 30.0 mm(4)
- 35.0 mm(8)
- 38.0 mm(1)
- 40.0 mm(4)
- 42.0 mm(4)
- 50.0 mm(12)
- 60.0 mm(18)
- 75.0 mm(30)
- 100.0 mm(32)
- 180.0 mm(40)
- 250.0 mm(40)
- 350.0 mm(38)
- 999.0 mm(39)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 1.028 in(1)
- 1.181 in(3)
- 1.185 in(1)
- 1.378 in(7)
- 1.4961 in(1)
- 1.575 in(4)
- 1.618 in(1)
- 1.654 in(4)
- 1.969 in(11)
- 2.362 in(18)
- 2.953 in(30)
- 3.937 in(32)
- 7.0866 in(2)
- 7.087 in(38)
- 9.8425 in(1)
- 9.843 in(39)
- 13.78 in(38)
- 39.331 in(39)
to
Insert Geometry
Shape
Shape
- PRISMATIC (1381)
- TN-TOP NOTCH (1627)
Insert Seat Size
Insert Seat Size
- 1 (27)
- 10 (74)
- 1F (12)
- 2 (597)
- 2B (18)
- 2S (14)
- 3 (1110)
- 3S (24)
- 4 (538)
- 4S (14)
- 5 (151)
- 5S (16)
- 6 (250)
- 8 (163)
Cutting Tool Material
Cutting Tool Material
- B H (214)
- B L (588)
- C N (102)
- D P (155)
- H T (233)
- H W (3741)
Back-End
Connection Type
Connection Type
- BORING BAR (90)
- BORING BAR HEAD (6)
- SQUARE SHANK (364)
System Size
System Size
- KM40TS (4)
- KM4X63 (4)
- KM50TS (8)
- KM63TS (8)
- KM63XMZ (11)
- KM80ATC (8)
- KM80TS (8)
- PSC40 (4)
- PSC50 (8)
- PSC63 (8)
- PSC80 (8)
- VDI30 (10)
- VDI40 (10)
Back-End Diameter
Back-End Diameter
- 9.525 mm(1)
- 10.0 mm(1)
- 12.0 mm(3)
- 12.7 mm(5)
- 15.87 mm(1)
- 15.875 mm(5)
- 16.0 mm(5)
- 19.05 mm(5)
- 20.0 mm(4)
- 25.0 mm(11)
- 25.4 mm(14)
- 30.0 mm(10)
- 31.75 mm(5)
- 32.0 mm(4)
- 38.1 mm(6)
- 40.0 mm(24)
- 44.45 mm(3)
- 50.0 mm(17)
- 50.8 mm(8)
- 57.15 mm(1)
- 63.0 mm(31)
- 63.5 mm(7)
- 80.0 mm(24)
to
Back-End Diameter
Back-End Diameter
- 1.181 in(8)
- 1.2 in(2)
- 1.5748 in(4)
- 1.575 in(14)
- 1.9685 in(4)
- 1.969 in(8)
- 1.97 in(4)
- 2.48 in(26)
- 2.4803 in(5)
- 3.15 in(24)
to
Shank Height
Shank Height
- 0.375 in(4)
- 0.394 in(3)
- 0.472 in(3)
- 0.5 in(6)
- 0.6067 in(1)
- 0.625 in(5)
- 0.63 in(4)
- 0.75 in(32)
- 0.785 in(5)
- 0.787 in(21)
- 0.7874 in(10)
- 0.9378 in(1)
- 0.982 in(8)
- 0.984 in(87)
- 0.9843 in(7)
- 1.0 in(114)
- 1.2134 in(2)
- 1.25 in(28)
- 1.2598 in(1)
- 1.26 in(22)
- 1.5 in(4)
- 1.5283 in(4)
- 1.8488 in(1)
to
Shank Height
Shank Height
- 9.52 mm(2)
- 9.525 mm(2)
- 10.0 mm(3)
- 12.0 mm(3)
- 12.7 mm(6)
- 15.41 mm(1)
- 15.875 mm(3)
- 15.88 mm(2)
- 16.0 mm(4)
- 19.05 mm(32)
- 20.0 mm(36)
- 23.82 mm(1)
- 25.0 mm(102)
- 25.4 mm(114)
- 30.82 mm(2)
- 31.75 mm(28)
- 32.0 mm(23)
- 38.1 mm(4)
- 38.82 mm(4)
- 46.96 mm(1)
to
Shank Width
Shank Width
- 0.375 in(4)
- 0.394 in(3)
- 0.472 in(3)
- 0.5 in(6)
- 0.625 in(5)
- 0.63 in(4)
- 0.75 in(32)
- 0.785 in(5)
- 0.787 in(20)
- 0.7874 in(10)
- 0.79 in(1)
- 0.8646 in(1)
- 0.98 in(1)
- 0.982 in(6)
- 0.984 in(91)
- 0.9843 in(6)
- 0.985 in(1)
- 1.0 in(114)
- 1.1402 in(2)
- 1.25 in(28)
- 1.26 in(20)
- 1.4551 in(4)
- 1.5 in(4)
- 1.8488 in(1)
to
Shank Width
Shank Width
- 9.52 mm(2)
- 9.525 mm(2)
- 10.0 mm(3)
- 12.0 mm(3)
- 12.7 mm(6)
- 15.875 mm(3)
- 15.88 mm(2)
- 16.0 mm(4)
- 19.05 mm(32)
- 20.0 mm(36)
- 21.96 mm(1)
- 25.0 mm(104)
- 25.01 mm(1)
- 25.4 mm(114)
- 28.96 mm(2)
- 31.75 mm(28)
- 32.0 mm(20)
- 36.96 mm(4)
- 38.1 mm(4)
- 46.96 mm(1)
to
Other
Insert Hand
Insert Hand
- L (1290)
- N (1945)
- R (1394)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
