Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Bolt-On Heads

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (104)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(104)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(104)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(104)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(104)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(104)
    • M Stainless Steel (104)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(104)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(104)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(104)
    • K Cast Iron (104)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(104)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
    • N Non-Ferrous Materials (97)
      • N1
        Wrought Aluminum (97)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(97)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(60)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (97)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (97)
      • N6
        Carbon, Graphite Composites, CFRP (97)
      • N7
        MMC's (76)
    • S High-Temp Alloys (104)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(104)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(104)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(104)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(104)
    • H Hardened Materials (87)
      • H1
        Hardened Materials 44-48 HRC(87)
      • H2
        Hardened Materials 48-55 HRC(87)
      • H3
        Hardened Materials 56-60 HRC(86)
      • H4
        Hardened Materials >60 HRC(76)
    • C CFRP Materials (86)
      • C1
        CFRP, CFRP / CFRP (86)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (76)
    Applications
    Applications
    • Back BoringBack Boring (34)
    • Face GroovingFace Grooving (8)
    • ID FacingID Facing (20)
    • ID GroovingID Grooving (45)
    • ID Thread TurningID Thread Turning (11)
    • TRN BoringTRN Boring (45)
    Cutting Condition Material
    Cutting Condition Material
    • H-All (86)
    • K-All (96)
    • K1 (16)
    • M-All (96)
    • N-All (96)
    • P-All (96)
    • S-All (96)
    • S2 (46)
    • S4 (22)
    Type of Thread
    Type of Thread
    • 55 (6)
    • 60 (16)
    • ACME (17)
    • API (13)
    • API BUTTRESS (2)
    • API RD (12)
    • BSPT (4)
    • BSW (14)
    • BUTTRESS (10)
    • M (9)
    • NPT (12)
    • NPTF (4)
    • RD DIN 405 (6)
    • STUB ACME (14)
    • TR DIN 103 (6)
    • UN (14)
    • UNJ (12)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (96)
    • Lightly Interrupted Cut (96)
    • Smooth Cut (96)
    • Varying Depth of Cut (96)
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 45.0 (2)
    • 62.5 (2)
    • 90.0 (76)
    • 93.0 (34)
    • 95.0 (32)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Bolt-On Head (104)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (11)
    • 1.0 (66)
    • 2.0 (73)
    • 3.0 (27)
    • 4.0 (54)
    • 6.0 (14)
    • 8.0 (20)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 0.6747 in(34)
    • 0.6944 in(12)
    • 0.7338 in(2)
    • 0.8913 in(6)
    • 0.97 in(4)
    • 0.9936 in(1)
    • 1.0094 in(2)
    • 1.0487 in(2)
    • 1.2456 in(6)
    • 1.2692 in(3)
    • 1.285 in(12)
    • 1.348 in(4)
    • 1.3637 in(14)
    • 1.3873 in(7)
    • 1.4031 in(24)
    • 1.4621 in(1)
    • 1.5212 in(3)
    • 1.5606 in(1)
    • 1.6787 in(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 17.138 mm(34)
    • 17.638 mm(12)
    • 18.638 mm(2)
    • 22.638 mm(6)
    • 24.638 mm(4)
    • 25.238 mm(1)
    • 25.638 mm(2)
    • 26.638 mm(2)
    • 31.638 mm(6)
    • 32.238 mm(3)
    • 32.638 mm(12)
    • 34.238 mm(4)
    • 34.638 mm(14)
    • 35.238 mm(7)
    • 35.638 mm(24)
    • 37.138 mm(1)
    • 38.638 mm(3)
    • 39.638 mm(1)
    • 42.638 mm(8)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.0 in(18)
    • 0.001 in(22)
    • 0.002 in(29)
    • 0.003 in(22)
    • 0.004 in(62)
    • 0.005 in(8)
    • 0.006 in(14)
    • 0.007 in(10)
    • 0.008 in(78)
    • 0.009 in(8)
    • 0.01 in(10)
    • 0.011 in(3)
    • 0.012 in(10)
    • 0.013 in(10)
    • 0.014 in(18)
    • 0.016 in(92)
    • 0.017 in(2)
    • 0.018 in(9)
    • 0.019 in(3)
    • 0.02 in(8)
    • 0.023 in(10)
    • 0.026 in(1)
    • 0.028 in(4)
    • 0.031 in(92)
    • 0.035 in(10)
    • 0.036 in(2)
    • -0.039 in(11)
    • 0.039 in(9)
    • 0.047 in(82)
    • 0.059 in(8)
    • 0.062 in(8)
    • 0.063 in(56)
    • 0.078 in(8)
    • 0.079 in(8)
    • 0.094 in(20)
    • 0.098 in(1)
    • 0.125 in(4)
    • 0.126 in(2)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(18)
    • 0.025 mm(22)
    • 0.05 mm(29)
    • 0.075 mm(22)
    • 0.1 mm(62)
    • 0.125 mm(8)
    • 0.15 mm(14)
    • 0.175 mm(10)
    • 0.2 mm(78)
    • 0.225 mm(8)
    • 0.25 mm(10)
    • 0.275 mm(3)
    • 0.3 mm(10)
    • 0.325 mm(10)
    • 0.35 mm(18)
    • 0.4 mm(92)
    • 0.425 mm(2)
    • 0.45 mm(9)
    • 0.475 mm(3)
    • 0.5 mm(8)
    • 0.575 mm(10)
    • 0.65 mm(1)
    • 0.7 mm(4)
    • 0.775 mm(8)
    • 0.8 mm(84)
    • 0.9 mm(10)
    • 0.925 mm(2)
    • -1.0 mm(11)
    • 1.0 mm(9)
    • 1.2 mm(82)
    • 1.5 mm(8)
    • 1.575 mm(8)
    • 1.6 mm(56)
    • 1.975 mm(8)
    • 2.0 mm(8)
    • 2.375 mm(6)
    • 2.4 mm(20)
    • 2.5 mm(1)
    • 3.175 mm(4)
    • 3.2 mm(2)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K060 (12)
    • K090 (2)
    • K313 (86)
    • K420 (10)
    • K68 (63)
    • KB1340 (16)
    • KB1345 (38)
    • KB1610 (38)
    • KB1630 (44)
    • KB5610 (34)
    • KB5630 (38)
    • KBH10 (60)
    • KBH10B (36)
    • KBH20 (69)
    • KBH20B (36)
    • KBK35 (12)
    • KC5010 (101)
    • KC5020P (2)
    • KC5025 (102)
    • KC5410 (79)
    • KC720 (10)
    • KC730 (82)
    • KC850 (86)
    • KC9110 (1)
    • KC9125 (2)
    • KCK05 (76)
    • KCK05B (38)
    • KCK15 (76)
    • KCK15B (76)
    • KCK20 (90)
    • KCK20B (88)
    • KCM15 (76)
    • KCM15B (78)
    • KCM25 (82)
    • KCM25B (82)
    • KCM25S (16)
    • KCM35 (74)
    • KCM35B (42)
    • KCP05 (62)
    • KCP05B (52)
    • KCP10 (86)
    • KCP10B (94)
    • KCP15 (4)
    • KCP20S (16)
    • KCP25 (84)
    • KCP25B (94)
    • KCP25C (84)
    • KCP30 (82)
    • KCP30B (38)
    • KCP40 (42)
    • KCP40B (52)
    • KCPK05 (48)
    • KCS10 (44)
    • KCS10B (78)
    • KCS25S (16)
    • KCU10 (96)
    • KCU10B (97)
    • KCU25 (93)
    • KCU25B (94)
    • KD1400 (56)
    • KD1405 (22)
    • KD1425 (60)
    • KN10S (18)
    • KS15 (12)
    • KT315 (81)
    • KT325 (40)
    • KTP10 (70)
    • KTP25S (64)
    • KY1540 (12)
    • KY1615 (2)
    • KY3500 (44)
    • KY4300 (22)
    • KY4400 (46)
    • KYHK15B (46)
    • KYK10 (24)
    • KYK25 (22)
    • KYS25 (12)
    • KYS30 (14)
    • SP4019 (24)
    • X00580 (12)
    • X00581 (12)
    • X00582 (12)
    • X00583 (12)
    • X00584 (12)
    • X00585 (12)
    • X00586 (12)
    • X00591 (12)
    • X00592 (12)
    • X00593 (12)
    • X00594 (12)
    • X00596 (12)
    • X00597 (12)
    • X00599 (12)
    Hand Of Tool
    Hand Of Tool
    • L (64)
    • R (74)
    Wiper Insert
    Wiper Insert
    • N (104)
    • Y (44)
    F Dimension
    F Dimension
    • 17.0 mm(20)
    • 18.278 mm(1)
    • 20.3 mm(6)
    • 22.0 mm(21)
    • 23.0 mm(2)
    • 23.278 mm(1)
    • 23.8 mm(2)
    • 26.8 mm(6)
    • 27.0 mm(27)
    • 27.8 mm(2)
    • 28.278 mm(1)
    • 28.677 mm(1)
    • 30.8 mm(8)
    • 32.8 mm(4)
    • 35.0 mm(27)
    • 35.8 mm(2)
    • 36.278 mm(1)
    • 36.677 mm(1)
    • 36.98 mm(1)
    • 37.8 mm(4)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.6693 in(20)
    • 0.7196 in(1)
    • 0.7992 in(6)
    • 0.8661 in(21)
    • 0.9055 in(2)
    • 0.9165 in(1)
    • 0.937 in(2)
    • 1.0551 in(6)
    • 1.063 in(27)
    • 1.0945 in(2)
    • 1.1133 in(1)
    • 1.129 in(1)
    • 1.2126 in(8)
    • 1.2913 in(4)
    • 1.378 in(27)
    • 1.4094 in(2)
    • 1.4283 in(1)
    • 1.444 in(1)
    • 1.4559 in(1)
    • 1.4882 in(4)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 26.0 mm(2)
    • 30.0 mm(2)
    • 32.0 mm(19)
    • 33.0 mm(10)
    • 40.0 mm(26)
    • 41.0 mm(2)
    • 43.0 mm(6)
    • 47.0 mm(4)
    • 48.0 mm(2)
    • 50.0 mm(29)
    • 51.0 mm(4)
    • 53.0 mm(4)
    • 61.0 mm(2)
    • 63.0 mm(34)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 1.0236 in(2)
    • 1.1811 in(2)
    • 1.2598 in(19)
    • 1.2992 in(8)
    • 1.2993 in(2)
    • 1.5748 in(26)
    • 1.6142 in(2)
    • 1.6929 in(6)
    • 1.8504 in(4)
    • 1.8898 in(2)
    • 1.9685 in(29)
    • 2.0079 in(4)
    • 2.0866 in(4)
    • 2.4016 in(2)
    • 2.4803 in(34)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -1.0 in(11)
    • 1.1811 in(2)
    • 1.378 in(2)
    • 1.5748 in(2)
    • 1.9685 in(2)
    • 393.661 in(10)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • -1.0 mm(11)
    • 30.0 mm(2)
    • 35.0 mm(2)
    • 40.0 mm(2)
    • 50.0 mm(2)
    • 9999.0 mm(10)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • B (32)
    • E (52)
    • P (2)
    • S (52)
    Rake Angle Style
    Rake Angle Style
    • DOUBLE NEGATIVE (61)
    • NEGATIVE-ZERO (32)
    • NEUTRAL (ZERO) (13)
    • POSITIVE-ZERO (2)
    Maximum Bore Depth
    Maximum Bore Depth
    • 0.6747 in(34)
    • 1.6787 in(8)
    • 3.92 in(21)
    • 5.04 in(24)
    • 6.28 in(29)
    • 7.88 in(30)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Maximum Bore Depth
    Maximum Bore Depth
    • 17.138 mm(34)
    • 42.638 mm(8)
    • 100.0 mm(21)
    • 128.0 mm(24)
    • 160.0 mm(29)
    • 200.0 mm(30)
    Maximum Bore Depth MinkomuMaximum Bore Depth Max
    Boring Bar Material
    Boring Bar Material
    • S (138)
    frontEnd
    Clamp Style
    Clamp Style
    • D (28)
    • N (11)
    • P (26)
    • S (39)
    • Y (42)
    Cutting Width
    Cutting Width
    • 0.0394 in(8)
    • 0.047 in(8)
    • 0.0472 in(8)
    • 0.0591 in(8)
    • 0.062 in(8)
    • 0.0689 in(8)
    • 0.072 in(8)
    • 0.078 in(8)
    • 0.0787 in(8)
    • 0.079 in(3)
    • 0.0866 in(8)
    • 0.088 in(8)
    • 0.0886 in(5)
    • 0.094 in(8)
    • 0.097 in(8)
    • 0.0984 in(8)
    • 0.105 in(8)
    • 0.1083 in(8)
    • 0.11 in(8)
    • 0.118 in(8)
    • 0.1181 in(10)
    • 0.122 in(8)
    • 0.125 in(10)
    • 0.126 in(8)
    • 0.128 in(8)
    • 0.131 in(3)
    • 0.1378 in(10)
    • 0.142 in(8)
    • 0.156 in(8)
    • 0.157 in(8)
    • 0.1574 in(8)
    • 0.1575 in(10)
    • 0.167 in(2)
    • 0.1673 in(8)
    • 0.1772 in(10)
    • 0.178 in(8)
    • 0.185 in(8)
    • 0.188 in(10)
    • 0.189 in(10)
    • 0.192 in(3)
    • 0.193 in(3)
    • 0.195 in(8)
    • 0.196 in(8)
    • 0.1969 in(2)
    • 0.197 in(1)
    • 0.213 in(2)
    • 0.2165 in(1)
    • 0.2166 in(1)
    • 0.2362 in(2)
    • 0.25 in(2)
    • 0.256 in(2)
    • 0.384 in(1)
    • -1.0 in(10)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • -1.0 mm(10)
    • 1.0 mm(8)
    • 1.19 mm(5)
    • 1.194 mm(8)
    • 1.2 mm(8)
    • 1.5 mm(8)
    • 1.57 mm(8)
    • 1.575 mm(8)
    • 1.75 mm(8)
    • 1.829 mm(8)
    • 1.981 mm(8)
    • 2.0 mm(8)
    • 2.2 mm(8)
    • 2.235 mm(8)
    • 2.236 mm(3)
    • 2.25 mm(5)
    • 2.387 mm(3)
    • 2.388 mm(8)
    • 2.39 mm(5)
    • 2.464 mm(8)
    • 2.5 mm(8)
    • 2.667 mm(8)
    • 2.75 mm(8)
    • 2.794 mm(8)
    • 2.997 mm(8)
    • 3.0 mm(10)
    • 3.099 mm(8)
    • 3.17 mm(8)
    • 3.175 mm(10)
    • 3.18 mm(1)
    • 3.2 mm(8)
    • 3.25 mm(8)
    • 3.251 mm(3)
    • 3.32 mm(3)
    • 3.329 mm(3)
    • 3.5 mm(10)
    • 3.607 mm(8)
    • 3.96 mm(8)
    • 3.962 mm(8)
    • 3.974 mm(3)
    • 3.988 mm(8)
    • 4.0 mm(10)
    • 4.242 mm(2)
    • 4.25 mm(8)
    • 4.5 mm(10)
    • 4.521 mm(8)
    • 4.699 mm(8)
    • 4.775 mm(10)
    • 4.78 mm(1)
    • 4.785 mm(1)
    • 4.788 mm(1)
    • 4.8 mm(8)
    • 4.801 mm(10)
    • 4.88 mm(3)
    • 4.9 mm(3)
    • 4.95 mm(8)
    • 4.953 mm(3)
    • 4.978 mm(8)
    • 5.0 mm(2)
    • 5.004 mm(1)
    • 5.41 mm(2)
    • 5.5 mm(2)
    • 6.0 mm(2)
    • 6.35 mm(2)
    • 6.36 mm(1)
    • 6.502 mm(2)
    • 9.754 mm(1)
    Cutting Width MinkomuCutting Width Max
    Insert Shape
    Insert Shape
    • C-DIAMOND/RHOMBIC 80 (26)
    • D-DIAMOND/RHOMBIC 55 (28)
    • LT-TRIANGLE LAY DOWN THREAD 60 (7)
    • PRISMATIC (42)
    • T-TRIANGLE 60 (18)
    • TN-TOP NOTCH (11)
    • V-DIAMOND/RHOMBIC 35 (10)
    • W-TRIGON 80 (4)
    Insert Size
    Insert Size
    • 2 (8)
    • 3 (14)
    • 4 (10)
    • 5 (6)
    • 6 (4)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.0984 in(2)
    • 0.1102 in(2)
    • 0.1299 in(2)
    • 0.1457 in(2)
    • 0.1784 in(4)
    • 0.1929 in(2)
    • 0.1969 in(1)
    • 0.2374 in(4)
    • 0.2756 in(10)
    • 0.2768 in(2)
    • 0.2769 in(6)
    • 0.3937 in(12)
    • 0.395 in(12)
    • 0.4724 in(16)
    • 0.5512 in(4)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 2.5 mm(2)
    • 2.8 mm(2)
    • 3.3 mm(2)
    • 3.7 mm(2)
    • 4.532 mm(4)
    • 4.9 mm(2)
    • 5.0 mm(1)
    • 6.03 mm(4)
    • 7.0 mm(10)
    • 7.03 mm(2)
    • 7.032 mm(6)
    • 10.0 mm(12)
    • 10.032 mm(12)
    • 12.0 mm(16)
    • 14.0 mm(4)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 1.0236 in(2)
    • 1.1811 in(2)
    • 1.2992 in(2)
    • 1.6142 in(2)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 26.0 mm(2)
    • 30.0 mm(2)
    • 33.0 mm(2)
    • 41.0 mm(2)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    Maximum Groove Diameter
    Maximum Groove Diameter
    • 30.0 mm(2)
    • 35.0 mm(2)
    • 40.0 mm(2)
    • 50.0 mm(2)
    Maximum Groove Diameter MinkomuMaximum Groove Diameter Max
    Maximum Groove Diameter
    Maximum Groove Diameter
    • 1.1811 in(2)
    • 1.378 in(2)
    • 1.5748 in(2)
    • 1.9685 in(2)
    Maximum Groove Diameter MinkomuMaximum Groove Diameter Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (70)
    • B L (69)
    • C A (46)
    • C N (44)
    • D P (72)
    • H T (81)
    • H W (104)
    backEnd
    Connection Type
    Connection Type
    • BORING BAR HEAD (104)
    Back-End Diameter
    Back-End Diameter
    • 25.0 mm(31)
    • 32.0 mm(38)
    • 40.0 mm(41)
    • 50.0 mm(36)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Devibrator Tool
    Devibrator Tool
    Insert Hand
    Insert Hand
    • L (25)
    • N (86)
    • R (31)
    Tuneable Tool
    Tuneable Tool
    No filters matching ""
    Bolt-On Heads
    Šroubem upínané břitové destičky • Pozitivní břitové destičky • STFC 90°
    (6)

    Šroubem upínané břitové destičky • Pozitivní břitové destičky • STFC 90°

    Kenlever • Negativní břitové destičky • PDUN 93°
    (8)

    Kenlever • Negativní břitové destičky • PDUN 93°

    Kenclamp™ • Negativní břitové destičky • DCLN 95°
    (12)

    Kenclamp™ • Negativní břitové destičky • DCLN 95°

    Se závitovou stopkou • Pozitivní břitové destičky • SVUB 93°
    (6)

    Se závitovou stopkou • Pozitivní břitové destičky • SVUB 93°

    Kenlever • Negativní břitové destičky • PCLN 95°
    (10)

    Kenlever • Negativní břitové destičky • PCLN 95°

    Kenclamp™ • Negativní břitové destičky • • DVUN 93°
    (4)

    Kenclamp™ • Negativní břitové destičky • • DVUN 93°

    Antivibrační • Šroubem upínané hlavy • Top Notch™ • Vnitřní chlazení • NE 90°
    (9)

    Antivibrační • Šroubem upínané hlavy • Top Notch™ • Vnitřní chlazení • NE 90°

    Beyond™ Evolution™ • Grooving • H-VE
    (34)

    Beyond™ Evolution™ • Grooving • H-VE

    Šroubem upínané břitové destičky • Pozitivní břitové destičky • SDPC 62.5°
    (2)

    Šroubem upínané břitové destičky • Pozitivní břitové destičky • SDPC 62.5°

    Šroubem upínané břitové destičky • Pozitivní břitové destičky • SCLC 95°
    (6)

    Šroubem upínané břitové destičky • Pozitivní břitové destičky • SCLC 95°

    Kenlever • Negativní břitové destičky • PTFN 90°
    (8)

    Kenlever • Negativní břitové destičky • PTFN 90°

    Antivibrační • Šroubem upínané hlavy • Se závitovou stopkou • Vnitřní chlazení • LS 90°
    (7)

    Antivibrační • Šroubem upínané hlavy • Se závitovou stopkou • Vnitřní chlazení • LS 90°

    Kenclamp™ • Negativní břitové destičky • • DWLN 95°
    (2)

    Kenclamp™ • Negativní břitové destičky • • DWLN 95°

    Kenclamp™ • Negativní břitové destičky • DDUN 93°
    (6)

    Kenclamp™ • Negativní břitové destičky • DDUN 93°

    Se závitovou stopkou • Pozitivní břitové destičky • SDUC 93°
    (10)

    Se závitovou stopkou • Pozitivní břitové destičky • SDUC 93°

    Se závitovou stopkou • Pozitivní břitové destičky • SWLP 95°
    (2)

    Se závitovou stopkou • Pozitivní břitové destičky • SWLP 95°

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk