Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Toolholders

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (21)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(21)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(21)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(21)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(21)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(21)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(21)
    • M Stainless Steel (21)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(21)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(21)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(21)
    • K Cast Iron (21)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(21)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(21)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(21)
    • N Non-Ferrous Materials (21)
      • N1
        Wrought Aluminum (21)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(21)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(6)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (21)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (21)
      • N6
        Carbon, Graphite Composites, CFRP (21)
      • N7
        MMC's (6)
    • S High-Temp Alloys (21)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(21)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(21)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(21)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(21)
    • H Hardened Materials (21)
      • H1
        Hardened Materials 44-48 HRC(21)
      • H2
        Hardened Materials 48-55 HRC(21)
      • H3
        Hardened Materials 56-60 HRC(9)
      • H4
        Hardened Materials >60 HRC(9)
    Applications
    Applications
    • Face GroovingFace Grooving (21)
    • GroovingGrooving (10)
    • Multiple Direction CuttingMultiple Direction Cutting (21)
    • ProfilingProfiling (10)
    • TurningTurning (10)
    Cutting Condition Material
    Cutting Condition Material
    • H-All (21)
    • K-All (21)
    • M-All (21)
    • N-All (21)
    • P-All (21)
    • S-All (21)
    Cutting Condition
    Cutting Condition
    • Heavily Interrupted Cut (21)
    • Lightly Interrupted Cut (21)
    • Smooth Cut (21)
    • Varying Depth of Cut (21)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (9)
    • 2.0 (21)
    Cutting Edges Per Insert MinkomuCutting Edges Per Insert Max
    Over All Length [L]
    Over All Length [L]
    • 4.9213 in(3)
    • 4.9331 in(7)
    • 5.0 in(2)
    • 5.9055 in(4)
    • 5.9173 in(1)
    • 6.0 in(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 125.0 mm(3)
    • 125.3 mm(7)
    • 127.0 mm(2)
    • 150.0 mm(4)
    • 150.3 mm(1)
    • 152.4 mm(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(13)
    • 0.016 in(17)
    • 0.031 in(10)
    • 0.039 in(4)
    • 0.047 in(4)
    • 0.048 in(1)
    • 0.059 in(7)
    • 0.06 in(3)
    • 0.063 in(3)
    • 0.079 in(3)
    • 0.08 in(2)
    • 0.094 in(2)
    • 0.098 in(3)
    • 0.099 in(1)
    • 0.118 in(3)
    • 0.119 in(3)
    • 0.125 in(3)
    • 0.156 in(1)
    • 0.157 in(1)
    • 0.158 in(1)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(13)
    • 0.4 mm(17)
    • 0.8 mm(10)
    • 1.0 mm(4)
    • 1.2 mm(4)
    • 1.225 mm(1)
    • 1.5 mm(7)
    • 1.525 mm(3)
    • 1.6 mm(3)
    • 2.0 mm(3)
    • 2.025 mm(2)
    • 2.375 mm(2)
    • 2.5 mm(3)
    • 2.525 mm(1)
    • 3.0 mm(3)
    • 3.025 mm(3)
    • 3.175 mm(3)
    • 3.975 mm(1)
    • 4.0 mm(1)
    • 4.025 mm(1)
    Corner Radius MinkomuCorner Radius Max
    application
    Minimum Depth of Cut
    Minimum Depth of Cut
    Minimum Feed
    Minimum Feed
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (10)
    • KB1630 (9)
    • KBH20 (9)
    • KC5010 (10)
    • KC5025 (10)
    • KC9125 (2)
    • KCK20 (10)
    • KCP10 (10)
    • KCP25 (10)
    • KCU10 (21)
    • KCU10B (21)
    • KCU25 (21)
    • KCU25B (21)
    • KD1405 (6)
    • KMS (3)
    • KT315 (8)
    • KY3500 (10)
    • KYS30 (5)
    Hand Of Tool
    Hand Of Tool
    • L (3)
    • N (10)
    • R (8)
    F Dimension
    F Dimension
    • 19.253 mm(2)
    • 20.19 mm(7)
    • 25.19 mm(1)
    • 25.4 mm(1)
    • 25.578 mm(1)
    • 27.9 mm(1)
    • 30.4 mm(1)
    • 30.8 mm(1)
    • 33.1 mm(1)
    • 35.1 mm(1)
    • 35.4 mm(1)
    • 38.9 mm(1)
    • 39.1 mm(2)
    F Dimension MinkomuF Dimension Max
    F Dimension
    F Dimension
    • 0.758 in(2)
    • 0.7949 in(7)
    • 0.9917 in(1)
    • 1.0 in(1)
    • 1.007 in(1)
    • 1.0984 in(1)
    • 1.1969 in(1)
    • 1.2126 in(1)
    • 1.3031 in(1)
    • 1.3819 in(1)
    • 1.3937 in(1)
    • 1.5315 in(1)
    • 1.5394 in(2)
    F Dimension MinkomuF Dimension Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 16.0 mm(2)
    • 19.99 mm(1)
    • 20.0 mm(1)
    • 24.994 mm(1)
    • 25.0 mm(4)
    • 28.0 mm(1)
    • 37.998 mm(1)
    • 70.0 mm(3)
    • 90.0 mm(2)
    • 120.0 mm(5)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Minimum Axial Groove Diameter
    Minimum Axial Groove Diameter
    • 0.6299 in(2)
    • 0.787 in(1)
    • 0.7874 in(1)
    • 0.984 in(1)
    • 0.9843 in(4)
    • 1.1024 in(1)
    • 1.496 in(1)
    • 2.7559 in(3)
    • 3.5433 in(2)
    • 4.7244 in(5)
    Minimum Axial Groove Diameter MinkomuMinimum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 0.7874 in(2)
    • 0.984 in(1)
    • 0.9843 in(1)
    • 1.378 in(1)
    • 1.417 in(1)
    • 1.4173 in(3)
    • 1.4961 in(1)
    • 2.2835 in(1)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Maximum Axial Groove Diameter
    Maximum Axial Groove Diameter
    • 20.0 mm(2)
    • 24.994 mm(1)
    • 25.0 mm(1)
    • 35.0 mm(1)
    • 35.992 mm(1)
    • 36.0 mm(3)
    • 38.0 mm(1)
    • 58.001 mm(1)
    Maximum Axial Groove Diameter MinkomuMaximum Axial Groove Diameter Max
    Cutting Direction
    Cutting Direction
    • E (11)
    • S (10)
    Rake Angle Style
    Rake Angle Style
    • NEUTRAL (ZERO) (10)
    frontEnd
    Cutting Width
    Cutting Width
    • 0.079 in(4)
    • 0.084 in(4)
    • 0.118 in(7)
    • 0.119 in(3)
    • 0.12 in(3)
    • 0.122 in(3)
    • 0.123 in(7)
    • 0.125 in(3)
    • 0.157 in(3)
    • 0.1575 in(2)
    • 0.158 in(2)
    • 0.161 in(2)
    • 0.162 in(3)
    • 0.187 in(2)
    • 0.1875 in(2)
    • 0.197 in(3)
    • 0.198 in(1)
    • 0.201 in(1)
    • 0.202 in(3)
    • 0.236 in(3)
    • 0.241 in(3)
    • 0.25 in(3)
    • 0.311 in(1)
    • 0.312 in(1)
    • 0.313 in(1)
    • 0.315 in(1)
    • 0.316 in(1)
    • 0.32 in(1)
    Cutting Width MinkomuCutting Width Max
    Cutting Width
    Cutting Width
    • 2.0 mm(4)
    • 2.13 mm(4)
    • 3.0 mm(7)
    • 3.05 mm(3)
    • 3.1 mm(3)
    • 3.11 mm(3)
    • 3.12 mm(7)
    • 3.13 mm(7)
    • 3.175 mm(3)
    • 3.18 mm(3)
    • 4.0 mm(3)
    • 4.1 mm(2)
    • 4.11 mm(2)
    • 4.12 mm(3)
    • 4.76 mm(2)
    • 4.762 mm(2)
    • 5.0 mm(3)
    • 5.1 mm(1)
    • 5.12 mm(3)
    • 5.13 mm(3)
    • 6.0 mm(3)
    • 6.12 mm(3)
    • 6.13 mm(3)
    • 6.35 mm(3)
    • 7.937 mm(1)
    • 7.938 mm(1)
    • 7.94 mm(1)
    • 8.0 mm(1)
    • 8.12 mm(1)
    • 8.13 mm(1)
    Cutting Width MinkomuCutting Width Max
    Insert Size
    Insert Size
    • 2S (4)
    • 3 (3)
    • 3S (4)
    • 4 (2)
    • 4S (1)
    • 5 (1)
    • 5S (2)
    • 6 (3)
    • 8 (1)
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 0.1969 in(3)
    • 0.2756 in(2)
    • 0.3543 in(1)
    • 0.4331 in(4)
    • 0.4724 in(4)
    • 0.551 in(2)
    • 0.5512 in(3)
    • 0.748 in(2)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Maximum Cutting Depth
    Maximum Cutting Depth
    • 5.0 mm(3)
    • 7.0 mm(2)
    • 9.0 mm(1)
    • 11.0 mm(4)
    • 12.0 mm(4)
    • 13.995 mm(2)
    • 14.0 mm(3)
    • 18.999 mm(1)
    • 19.0 mm(1)
    Maximum Cutting Depth MinkomuMaximum Cutting Depth Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 1.1024 in(1)
    • 2.7559 in(3)
    • 3.5433 in(2)
    • 4.7244 in(5)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    Minimum Groove Diameter
    Minimum Groove Diameter
    • 28.0 mm(1)
    • 70.0 mm(3)
    • 90.0 mm(2)
    • 120.0 mm(5)
    Minimum Groove Diameter MinkomuMinimum Groove Diameter Max
    Maximum Groove Diameter
    Maximum Groove Diameter
    • 38.0 mm(1)
    Maximum Groove Diameter MinkomuMaximum Groove Diameter Max
    Maximum Groove Diameter
    Maximum Groove Diameter
    • 1.4961 in(1)
    Maximum Groove Diameter MinkomuMaximum Groove Diameter Max
    insertGeometry
    Cutting Tool Material
    Cutting Tool Material
    • B H (9)
    • B L (9)
    • C N (10)
    • D P (6)
    • H T (8)
    • H W (21)
    backEnd
    Shank Height
    Shank Height
    • 0.75 in(2)
    • 0.7874 in(10)
    • 0.9843 in(5)
    • 1.0 in(4)
    Shank Height MinkomuShank Height Max
    Shank Height
    Shank Height
    • 19.05 mm(2)
    • 20.0 mm(10)
    • 25.0 mm(5)
    • 25.4 mm(4)
    Shank Height MinkomuShank Height Max
    Shank Width
    Shank Width
    • 0.75 in(2)
    • 0.7874 in(10)
    • 0.9843 in(5)
    • 1.0 in(4)
    Shank Width MinkomuShank Width Max
    Shank Width
    Shank Width
    • 19.05 mm(2)
    • 20.0 mm(10)
    • 25.0 mm(5)
    • 25.4 mm(4)
    Shank Width MinkomuShank Width Max
    other
    Insert Hand
    Insert Hand
    • L (5)
    • N (21)
    • R (5)
    No filters matching ""
    Toolholders
    A4EN
    (7)

    A4EN

    A4EN
    (3)

    A4EN

    Nástrojové držáky A4SB pro čelní zapichování malých průměrů
    (8)

    Nástrojové držáky A4SB pro čelní zapichování malých průměrů

    Nástrojové držáky A4SB pro čelní zapichování malých průměrů
    (3)

    Nástrojové držáky A4SB pro čelní zapichování malých průměrů

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk