DUO-λOCK® Modular End Mills • MaxiMet™

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • N Non-Ferrous Materials (53)
      • N1
        Wrought Aluminum (53)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(53)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(53)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (53)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (53)
      • N6
        Carbon, Graphite Composites, CFRP (8)
      • N7
        MMC's (8)
    Applications
    Applications
    • Face MillingFace Milling (43)
    • PocketPocket (43)
    • Pocket HelicalPocket Helical (43)
    • Pocket MillingPocket Milling (43)
    • Pocket Plunge MillingPocket Plunge Milling (43)
    • Profile MillingProfile Milling (8)
    • RampingRamping (43)
    • Shoulder Ball NoseShoulder Ball Nose (8)
    • Shoulder MillingShoulder Milling (51)
    • Shoulder RoughingShoulder Roughing (43)
    • Shoulder Square EndShoulder Square End (43)
    • Slot Ball NoseSlot Ball Nose (8)
    • Slot MillingSlot Milling (51)
    • Slot Square EndSlot Square End (43)
    Cutting Diameter
    Cutting Diameter
    • 0.375 in(4)
    • 0.3937 in(5)
    • 0.4724 in(6)
    • 0.5 in(7)
    • 0.625 in(5)
    • 0.6287 in(3)
    • 0.6299 in(5)
    • 0.75 in(6)
    • 0.7874 in(7)
    • 0.9843 in(2)
    • 1.0 in(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 9.525 mm(4)
    • 10.0 mm(5)
    • 12.0 mm(6)
    • 12.7 mm(7)
    • 15.875 mm(5)
    • 15.968 mm(3)
    • 16.0 mm(5)
    • 19.05 mm(6)
    • 20.0 mm(7)
    • 25.0 mm(2)
    • 25.4 mm(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 14.288 mm(3)
    • 14.29 mm(1)
    • 15.0 mm(5)
    • 17.5 mm(1)
    • 18.0 mm(5)
    • 19.05 mm(7)
    • 23.812 mm(3)
    • 23.813 mm(2)
    • 24.0 mm(8)
    • 28.575 mm(6)
    • 30.0 mm(7)
    • 37.5 mm(2)
    • 38.1 mm(3)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.5625 in(3)
    • 0.5626 in(1)
    • 0.5906 in(5)
    • 0.689 in(1)
    • 0.7087 in(5)
    • 0.75 in(7)
    • 0.9375 in(5)
    • 0.9449 in(8)
    • 1.125 in(6)
    • 1.1811 in(7)
    • 1.4764 in(2)
    • 1.5 in(3)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.8425 in(4)
    • 0.8858 in(5)
    • 1.063 in(6)
    • 1.126 in(7)
    • 1.4055 in(5)
    • 1.4173 in(8)
    • 1.689 in(6)
    • 1.7717 in(7)
    • 2.2244 in(2)
    • 2.252 in(3)
    Reach MinkomuReach Max
    Reach
    Reach
    • 21.4 mm(4)
    • 22.5 mm(5)
    • 27.0 mm(6)
    • 28.6 mm(7)
    • 35.7 mm(5)
    • 36.0 mm(8)
    • 42.9 mm(6)
    • 45.0 mm(7)
    • 56.5 mm(2)
    • 57.2 mm(3)
    Reach MinkomuReach Max
    Number of Flutes
    Number of Flutes
    • 2 (8)
    • 3 (45)
    Over All Length [L]
    Over All Length [L]
    • 1.3346 in(2)
    • 1.3543 in(2)
    • 1.378 in(5)
    • 1.6535 in(6)
    • 1.7165 in(7)
    • 2.1929 in(5)
    • 2.2047 in(8)
    • 2.6299 in(6)
    • 2.7126 in(7)
    • 3.4606 in(2)
    • 3.4882 in(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 33.9 mm(2)
    • 34.4 mm(2)
    • 35.0 mm(5)
    • 42.0 mm(6)
    • 43.6 mm(7)
    • 55.7 mm(5)
    • 56.0 mm(8)
    • 66.8 mm(6)
    • 68.9 mm(7)
    • 87.9 mm(2)
    • 88.6 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • BALL NOSE (8)
    • RADIUS (37)
    • SQUARE END (8)
    Corner Radius
    Corner Radius
    • 0.0 in(8)
    • 0.015 in(1)
    • 0.02 in(2)
    • 0.03 in(4)
    • 0.039 in(4)
    • 0.059 in(3)
    • 0.06 in(6)
    • 0.079 in(2)
    • 0.09 in(3)
    • 0.098 in(4)
    • 0.118 in(2)
    • 0.12 in(3)
    • 0.157 in(2)
    • 0.188 in(1)
    • 0.197 in(2)
    • 0.236 in(1)
    • 0.25 in(1)
    • 0.313 in(1)
    • 0.315 in(1)
    • 0.375 in(1)
    • 0.394 in(1)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(8)
    • 0.375 mm(1)
    • 0.5 mm(2)
    • 0.75 mm(4)
    • 1.0 mm(4)
    • 1.5 mm(3)
    • 1.525 mm(6)
    • 2.0 mm(2)
    • 2.275 mm(3)
    • 2.5 mm(4)
    • 3.0 mm(2)
    • 3.05 mm(3)
    • 4.0 mm(2)
    • 4.775 mm(1)
    • 5.0 mm(2)
    • 6.0 mm(1)
    • 6.35 mm(1)
    • 7.95 mm(1)
    • 8.0 mm(1)
    • 9.525 mm(1)
    • 10.0 mm(1)
    Corner Radius MinkomuCorner Radius Max
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 9.125 mm(4)
    • 10.0 mm(5)
    • 12.0 mm(6)
    • 12.2 mm(7)
    • 15.375 mm(4)
    • 15.875 mm(1)
    • 16.0 mm(8)
    • 18.55 mm(6)
    • 19.3 mm(7)
    • 24.4 mm(3)
    • 25.0 mm(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.3593 in(4)
    • 0.3937 in(5)
    • 0.4724 in(6)
    • 0.4803 in(7)
    • 0.6053 in(4)
    • 0.625 in(1)
    • 0.6299 in(8)
    • 0.7307 in(6)
    • 0.7598 in(7)
    • 0.9606 in(3)
    • 0.9843 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Gage Length [L1]
    Gage Length [L1]
    • 21.4 mm(4)
    • 22.5 mm(5)
    • 27.0 mm(6)
    • 28.6 mm(7)
    • 35.7 mm(5)
    • 36.0 mm(8)
    • 42.9 mm(6)
    • 45.0 mm(7)
    • 56.5 mm(2)
    • 57.2 mm(3)
    Gage Length [L1] MinkomuGage Length [L1] Max
    Gage Length [L1]
    Gage Length [L1]
    • 0.8425 in(4)
    • 0.8858 in(5)
    • 1.063 in(6)
    • 1.126 in(7)
    • 1.4055 in(5)
    • 1.4173 in(8)
    • 1.689 in(6)
    • 1.7717 in(7)
    • 2.2244 in(2)
    • 2.252 in(3)
    Gage Length [L1] MinkomuGage Length [L1] Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)