Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

Vynikající kvalita povrchu a vyšší úběry materiálu

Unikátní konstrukce umožňuje zákazníkům bez potíží použít nástroj při opakovaných průchodech jako jsou „sestupné kroky“.

Většina nástrojů zanechává po každém průchodu stopy, které vedou k nedostatečné nebo nízké jakosti povrchů. To obvykle vede k dalšímu dokončovacímu průchodu na úplném konci procesu.

Při použití Mill 4-15 není nutný dodatečný dokončovací nástroj a tím se šetří čas i peníze.

Další informace

Součást programu First Choice.

Snadný výběr, snadné objednání, snadné použití, výjimečná výkonnost.

Další informace
Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (135)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(130)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(130)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(130)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(130)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(130)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(135)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(135)
    • M Stainless Steel (135)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(135)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(135)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(135)
    • K Cast Iron (134)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(134)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(134)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(134)
    • N Non-Ferrous Materials (74)
      • N1
        Wrought Aluminum (74)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(74)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(74)
    • S High-Temp Alloys (129)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(117)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(117)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(117)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(129)
    • H Hardened Materials (93)
      • H1
        Hardened Materials 44-48 HRC(93)
    Vybrat první volbu
    • BR (20)
    • CN (91)
    • DE (91)
    • GB (48)
    • IN (17)
    • SG (41)
    • US (86)
    Applications
    Applications
    • Face MillingFace Milling (72)
    • Shoulder MillingShoulder Milling (72)
    • Shoulder RoughingShoulder Roughing (72)
    • Shoulder Square EndShoulder Square End (72)
    • Slot MillingSlot Milling (10)
    • Slot Square EndSlot Square End (10)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(4)
    • 1.0 in(5)
    • 1.25 in(5)
    • 1.26 in(7)
    • 1.378 in(1)
    • 1.5 in(6)
    • 1.575 in(7)
    • 1.968 in(2)
    • 1.969 in(1)
    • 2.0 in(3)
    • 2.48 in(3)
    • 2.5 in(3)
    • 3.0 in(4)
    • 3.15 in(3)
    • 3.937 in(3)
    • 4.0 in(3)
    • 4.921 in(2)
    • 4.9213 in(1)
    • 5.0 in(3)
    • 6.0 in(3)
    • 6.299 in(1)
    • 6.2992 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(4)
    • 25.4 mm(5)
    • 31.75 mm(5)
    • 32.0 mm(7)
    • 35.0 mm(1)
    • 38.1 mm(6)
    • 40.0 mm(7)
    • 50.0 mm(3)
    • 50.8 mm(3)
    • 63.0 mm(3)
    • 63.5 mm(3)
    • 76.2 mm(4)
    • 80.0 mm(3)
    • 100.0 mm(3)
    • 101.6 mm(3)
    • 125.0 mm(3)
    • 127.0 mm(3)
    • 152.4 mm(3)
    • 160.0 mm(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 15.5 mm(72)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.61 in(62)
    • 0.6102 in(10)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.25 in(1)
    • 1.2598 in(1)
    • 1.26 in(1)
    • 1.574 in(2)
    • 1.575 in(16)
    • 1.693 in(2)
    • 1.696 in(1)
    • 1.75 in(10)
    • 1.929 in(2)
    • 1.968 in(5)
    • 1.9685 in(2)
    • 1.969 in(5)
    • 2.0 in(4)
    • 2.25 in(8)
    • 2.38 in(6)
    • 2.48 in(3)
    • 2.4803 in(3)
    Reach MinkomuReach Max
    Reach
    Reach
    • 31.75 mm(1)
    • 32.0 mm(2)
    • 39.986 mm(2)
    • 40.0 mm(10)
    • 40.005 mm(6)
    • 43.0 mm(2)
    • 44.45 mm(10)
    • 49.0 mm(2)
    • 50.0 mm(12)
    • 50.021 mm(1)
    • 50.8 mm(4)
    • 57.15 mm(8)
    • 60.45 mm(3)
    • 60.452 mm(3)
    • 63.0 mm(6)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (72)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • 2 Key & Cutter Retention Screw (2)
    • 2 Key & Socket Head Cap Screw (1)
    • A-Socket Head Cap Screw (28)
    • B-Cutter Retention Screw (6)
    • SHCS or RetScrw Or BoltCircle (3)
    • Screw-On Connection (8)
    • Straight-Cylindrical (14)
    • Weldon (10)
    Number of Flutes
    Number of Flutes
    • 10 (1)
    • 11 (2)
    • 12 (4)
    • 16 (1)
    • 2 (9)
    • 3 (12)
    • 4 (13)
    • 5 (9)
    • 6 (6)
    • 7 (6)
    • 8 (5)
    • 9 (4)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.574 in(2)
    • 1.575 in(12)
    • 1.75 in(4)
    • 1.968 in(3)
    • 1.9685 in(2)
    • 1.969 in(1)
    • 2.0 in(4)
    • 2.116 in(1)
    • 2.126 in(1)
    • 2.38 in(6)
    • 2.48 in(3)
    • 2.4803 in(3)
    • 2.539 in(4)
    • 2.715 in(2)
    • 3.5039 in(1)
    • 3.78 in(1)
    • 3.937 in(1)
    • 4.03 in(1)
    • 4.331 in(2)
    • 4.37 in(3)
    • 4.53 in(4)
    • 6.693 in(1)
    • 7.874 in(4)
    • 8.0 in(3)
    • 10.0 in(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 39.986 mm(2)
    • 40.0 mm(6)
    • 40.005 mm(6)
    • 44.45 mm(4)
    • 50.0 mm(5)
    • 50.021 mm(1)
    • 50.8 mm(4)
    • 53.75 mm(1)
    • 54.0 mm(1)
    • 60.45 mm(3)
    • 60.452 mm(3)
    • 63.0 mm(6)
    • 64.5 mm(4)
    • 68.95 mm(2)
    • 89.0 mm(1)
    • 96.01 mm(1)
    • 100.0 mm(1)
    • 102.36 mm(1)
    • 110.0 mm(2)
    • 111.0 mm(3)
    • 115.02 mm(1)
    • 115.06 mm(1)
    • 115.062 mm(2)
    • 170.0 mm(1)
    • 200.0 mm(4)
    • 203.2 mm(3)
    • 254.0 mm(3)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.016 in(90)
    • 0.031 in(101)
    • 0.047 in(94)
    • 0.063 in(87)
    • 0.064 in(78)
    • 0.079 in(80)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.4 mm(90)
    • 0.8 mm(101)
    • 1.2 mm(94)
    • 1.6 mm(87)
    • 1.625 mm(78)
    • 2.0 mm(80)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC422M (74)
    • KC520M (83)
    • KC522M (83)
    • KC725M (85)
    • KCK15 (83)
    • KCK20B (83)
    • KCPK30 (84)
    • KCPM20 (78)
    • KCPM40 (84)
    • KCSM30 (76)
    • KCSM40 (77)
    Hand Of Tool
    Hand Of Tool
    • R (72)
    Wiper Insert
    Wiper Insert
    • N (98)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.728 in(1)
    • 0.929 in(1)
    • 0.984 in(1)
    • 1.176 in(1)
    • 1.177 in(1)
    • 1.185 in(2)
    • 1.22 in(4)
    • 1.24 in(4)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 18.5 mm(1)
    • 23.59 mm(1)
    • 25.0 mm(1)
    • 29.87 mm(1)
    • 29.89 mm(1)
    • 30.1 mm(2)
    • 31.0 mm(4)
    • 31.5 mm(4)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • X-RECTANGLE MILL 4 90 (98)
    Cutting Edge Length
    Cutting Edge Length
    • 16.155 mm(19)
    • 16.9 mm(26)
    • 16.92 mm(5)
    • 17.0 mm(2)
    • 17.004 mm(7)
    • 17.01 mm(39)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.636 in(19)
    • 0.665 in(20)
    • 0.666 in(11)
    • 0.669 in(7)
    • 0.67 in(41)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GE (78)
    • GEH (1)
    • GEM (19)
    Cutting Tool Material
    Cutting Tool Material
    • H W (98)
    Tolerance Class
    Tolerance Class
    • G (67)
    • P (31)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (24)
    • SCREW-ON (8)
    • SHELL MILL (40)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(1)
    • 16.0 mm(2)
    • 19.05 mm(6)
    • 21.0 mm(2)
    • 22.0 mm(6)
    • 25.0 mm(3)
    • 25.4 mm(8)
    • 27.0 mm(3)
    • 29.0 mm(6)
    • 31.75 mm(8)
    • 32.0 mm(12)
    • 38.1 mm(6)
    • 40.0 mm(6)
    • 50.8 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.63 in(2)
    • 0.75 in(6)
    • 0.827 in(2)
    • 0.8661 in(1)
    • 0.867 in(4)
    • 0.984 in(3)
    • 1.0 in(8)
    • 1.063 in(1)
    • 1.064 in(2)
    • 1.1417 in(1)
    • 1.142 in(5)
    • 1.25 in(8)
    • 1.2598 in(2)
    • 1.26 in(9)
    • 1.5 in(6)
    • 1.5748 in(3)
    • 1.575 in(2)
    • 2.0 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • R (98)
    Number of Inserts
    Number of Inserts
    • 2.0 (9)
    • 3.0 (12)
    • 4.0 (13)
    • 5.0 (9)
    • 6.0 (6)
    • 7.0 (6)
    • 8.0 (5)
    • 9.0 (4)
    • 10.0 (1)
    • 11.0 (2)
    • 12.0 (4)
    • 16.0 (1)
    Number of Inserts MinkomuNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 1.25 in(1)
    • 1.2598 in(1)
    • 1.26 in(1)
    • 1.575 in(4)
    • 1.693 in(2)
    • 1.75 in(6)
    • 1.929 in(2)
    • 1.968 in(2)
    • 1.969 in(5)
    • 2.25 in(8)
    Head Length [L2] MinkomuHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 31.75 mm(1)
    • 32.0 mm(2)
    • 40.0 mm(4)
    • 43.0 mm(2)
    • 44.45 mm(6)
    • 49.0 mm(2)
    • 50.0 mm(7)
    • 57.15 mm(8)
    Head Length [L2] MinkomuHead Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    Mill 4-15™
    Inserts Mill 4-15™
    (97)

    Inserts Mill 4-15™

    Cutters Mill 4-15™ • Metric
    (37)

    Cutters Mill 4-15™ • Metric

    Cutters Mill 4-15™ • Inch
    (35)

    Cutters Mill 4-15™ • Inch

    Mill 4-15™ • Carbide Insert • LNPU15-SGE • Medium Machining
    (31)

    Mill 4-15™ • Carbide Insert • LNPU15-SGE • Medium Machining

    Mill 4-15™ • Carbide Insert • LNGU15-SGE • Medium Machining
    (29)

    Mill 4-15™ • Carbide Insert • LNGU15-SGE • Medium Machining

    Mill 4-15™ • Carbide Insert • LNGU15-EGE • Light Machining
    (16)

    Mill 4-15™ • Carbide Insert • LNGU15-EGE • Light Machining

    Mill 4-15™ • Carbide Insert • LNGU15-SGEM • Heavy Machining
    (19)

    Mill 4-15™ • Carbide Insert • LNGU15-SGEM • Heavy Machining

    Mill 4-15™ • Carbide Insert • LNGU15-EGEJ • Light Machining of Aluminum
    (2)

    Mill 4-15™ • Carbide Insert • LNGU15-EGEJ • Light Machining of Aluminum

    Mill 4-15™ • Břitové destičky • LNGU15-SGEH • Zavrtávací frézování
    (1)

    Mill 4-15™ • Břitové destičky • LNGU15-SGEH • Zavrtávací frézování

    Mill 4-15™ • Shell Mill • Metric
    (20)

    Mill 4-15™ • Shell Mill • Metric

    Mill 4-15™ • Shell Mill • Inch
    (20)

    Mill 4-15™ • Shell Mill • Inch

    Mill 4-15™ • End Mill • Weldon® Shank • Metric
    (4)

    Mill 4-15™ • End Mill • Weldon® Shank • Metric

    Mill 4-15™ • End Mill • Screw-On • Metric
    (5)

    Mill 4-15™ • End Mill • Screw-On • Metric

    Mill 4-15™ • End Mill • Cylindrical Shank • Metric
    (8)

    Mill 4-15™ • End Mill • Cylindrical Shank • Metric

    Mill 4-15™ • End Mill • Screw-On • Inch
    (3)

    Mill 4-15™ • End Mill • Screw-On • Inch

    Mill 4-15™ • End Mill • Weldon Shank • Inch
    (6)

    Mill 4-15™ • End Mill • Weldon Shank • Inch

    Mill 4-15™ • End Mill • Cylindrical Shank • Inch
    (6)

    Mill 4-15™ • End Mill • Cylindrical Shank • Inch

    Máte na nás otázky?

    Náš zkušený tým je připraven vám pomoci.

    Vyžádejte si další informace
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk