Cutters Mill 1-14™ • Inch

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (49)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(49)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(49)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(49)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(49)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(49)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
    • M Stainless Steel (49)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(49)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(49)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(49)
    • K Cast Iron (49)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(49)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(49)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(49)
    • N Non-Ferrous Materials (49)
      • N1
        Wrought Aluminum (49)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(49)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(49)
    • S High-Temp Alloys (49)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(49)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(49)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(49)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(49)
    • H Hardened Materials (49)
      • H1
        Hardened Materials 44-48 HRC(49)
    Vybrat první volbu
    • US (36)
    Applications
    Applications
    • Face MillingFace Milling (49)
    • PocketPocket (49)
    • Pocket HelicalPocket Helical (49)
    • Pocket MillingPocket Milling (49)
    • Profile MillingProfile Milling (3)
    • RampingRamping (49)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (3)
    • Shoulder MillingShoulder Milling (49)
    • Shoulder RoughingShoulder Roughing (13)
    • Shoulder Square EndShoulder Square End (49)
    • Slot MillingSlot Milling (44)
    • Slot SideSlot Side (3)
    • Slot Square EndSlot Square End (44)
    Cutting Diameter
    Cutting Diameter
    • 0.625 in(1)
    • 0.75 in(3)
    • 0.875 in(1)
    • 0.97 in(1)
    • 1.0 in(7)
    • 1.25 in(9)
    • 1.5 in(11)
    • 2.0 in(6)
    • 2.5 in(5)
    • 3.0 in(3)
    • 4.0 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.875 mm(1)
    • 19.05 mm(3)
    • 22.225 mm(1)
    • 24.64 mm(1)
    • 25.4 mm(7)
    • 31.75 mm(9)
    • 38.1 mm(11)
    • 50.8 mm(6)
    • 63.5 mm(5)
    • 76.2 mm(3)
    • 101.6 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 14.0 mm(8)
    • 14.1 mm(3)
    • 14.3 mm(5)
    • 14.4 mm(3)
    • 14.402 mm(2)
    • 14.478 mm(2)
    • 14.5 mm(4)
    • 14.503 mm(1)
    • 14.6 mm(3)
    • 14.605 mm(1)
    • 14.732 mm(6)
    • 15.503 mm(1)
    • 27.2 mm(1)
    • 27.6 mm(1)
    • 27.8 mm(1)
    • 39.9 mm(2)
    • 40.4 mm(1)
    • 40.96 mm(1)
    • 52.8 mm(1)
    • 53.44 mm(1)
    • 54.09 mm(1)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.555 in(1)
    • 0.56 in(15)
    • 0.567 in(2)
    • 0.57 in(11)
    • 0.571 in(2)
    • 0.575 in(1)
    • 0.58 in(7)
    • 1.07 in(1)
    • 1.09 in(1)
    • 1.1 in(1)
    • 1.57 in(2)
    • 1.591 in(1)
    • 1.612 in(1)
    • 2.08 in(1)
    • 2.104 in(1)
    • 2.13 in(1)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.5 in(3)
    • 1.575 in(7)
    • 1.625 in(1)
    • 1.73 in(1)
    • 1.75 in(13)
    • 2.0 in(5)
    • 2.23 in(2)
    • 2.25 in(10)
    • 2.5 in(4)
    • 3.0 in(2)
    • 3.001 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 38.1 mm(2)
    • 38.11 mm(1)
    • 40.0 mm(7)
    • 41.28 mm(1)
    • 43.95 mm(1)
    • 44.45 mm(13)
    • 50.8 mm(5)
    • 56.64 mm(1)
    • 56.65 mm(1)
    • 57.15 mm(10)
    • 63.5 mm(4)
    • 76.19 mm(1)
    • 76.2 mm(2)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (17)
    • CV-Caterpillar V-Flange In (3)
    • Straight-Cylindrical (9)
    • Weldon (20)
    Number of Flutes
    Number of Flutes
    • 1 (1)
    • 10 (1)
    • 2 (7)
    • 3 (18)
    • 4 (10)
    • 5 (7)
    • 6 (2)
    • 7 (1)
    • 8 (2)
    Over All Length [L]
    Over All Length [L]
    • 1.575 in(7)
    • 1.75 in(3)
    • 2.0 in(3)
    • 2.5 in(3)
    • 3.0 in(1)
    • 3.53 in(1)
    • 3.78 in(2)
    • 4.01 in(1)
    • 4.03 in(4)
    • 4.28 in(2)
    • 4.51 in(2)
    • 4.53 in(5)
    • 4.78 in(1)
    • 5.28 in(1)
    • 5.687 in(3)
    • 5.69 in(1)
    • 6.5 in(1)
    • 7.5 in(1)
    • 8.0 in(3)
    • 10.0 in(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(7)
    • 44.45 mm(3)
    • 50.8 mm(3)
    • 63.5 mm(3)
    • 76.2 mm(1)
    • 89.67 mm(1)
    • 96.012 mm(2)
    • 101.86 mm(1)
    • 102.36 mm(3)
    • 102.362 mm(1)
    • 108.71 mm(2)
    • 114.56 mm(2)
    • 115.06 mm(1)
    • 115.062 mm(4)
    • 121.41 mm(1)
    • 134.12 mm(1)
    • 144.44 mm(1)
    • 144.45 mm(2)
    • 144.52 mm(1)
    • 165.1 mm(1)
    • 190.5 mm(1)
    • 203.2 mm(3)
    • 254.0 mm(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.008 in(47)
    • 0.016 in(47)
    • 0.031 in(47)
    • 0.047 in(47)
    • 0.063 in(47)
    • 0.079 in(47)
    • 0.094 in(47)
    • 0.122 in(49)
    • 0.157 in(49)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.2 mm(47)
    • 0.4 mm(47)
    • 0.8 mm(47)
    • 1.2 mm(47)
    • 1.6 mm(47)
    • 2.0 mm(47)
    • 2.375 mm(47)
    • 3.1 mm(49)
    • 4.0 mm(49)
    Corner Radius MinkomuCorner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC410M (49)
    • KC422M (47)
    • KC520M (47)
    • KC522M (49)
    • KC725M (49)
    • KCK15 (47)
    • KCK20B (47)
    • KCPK30 (49)
    • KCPM20 (47)
    • KCPM40 (47)
    • KCSM30 (49)
    • KCSM40 (49)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 1.5 (2)
    • 2.0 (3)
    • 2.5 (5)
    • 3.4 (6)
    • 5.2 (8)
    • 5.5 (3)
    • 6.9 (5)
    • 7.2 (4)
    • 10.2 (4)
    • 10.4 (3)
    • 10.9 (1)
    • 13.2 (1)
    • 18.0 (1)
    • 18.5 (2)
    • 25.0 (1)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • E-PARALLELOGRAM 70 (49)
    • X-PARALLELOGRAM 70 (49)
    Neck Diameter
    Neck Diameter
    • 1.16 in(3)
    • 1.211 in(1)
    • 1.48 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 29.46 mm(3)
    • 30.75 mm(1)
    • 37.59 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (29)
    • SHELL MILL (17)
    • TAPER SHANK (3)
    System Size
    System Size
    • CV40 (3)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(1)
    • 19.05 mm(7)
    • 19.1 mm(6)
    • 25.4 mm(15)
    • 31.74 mm(5)
    • 31.75 mm(9)
    • 38.09 mm(1)
    • 38.1 mm(2)
    • 44.45 mm(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.75 in(13)
    • 1.0 in(15)
    • 1.25 in(14)
    • 1.5 in(3)
    • 1.75 in(3)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Number of Inserts
    Number of Inserts
    • 1.0 (1)
    • 2.0 (6)
    • 3.0 (10)
    • 4.0 (10)
    • 5.0 (7)
    • 6.0 (4)
    • 7.0 (1)
    • 8.0 (2)
    • 9.0 (3)
    • 10.0 (1)
    • 12.0 (4)
    Number of Inserts MinkomuNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 1.5 in(3)
    • 1.625 in(1)
    • 1.73 in(1)
    • 1.75 in(10)
    • 2.0 in(2)
    • 2.23 in(2)
    • 2.25 in(10)
    • 2.5 in(1)
    • 3.0 in(1)
    • 3.001 in(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 38.1 mm(2)
    • 38.11 mm(1)
    • 41.28 mm(1)
    • 43.95 mm(1)
    • 44.45 mm(10)
    • 50.8 mm(2)
    • 56.64 mm(1)
    • 56.65 mm(1)
    • 57.15 mm(10)
    • 63.5 mm(1)
    • 76.19 mm(1)
    • 76.2 mm(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)