Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

5720 Series • Two Cutting Edges • Ap1 max 16mm

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • K Cast Iron (46)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(46)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(46)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(46)
    • N Non-Ferrous Materials (46)
      • N1
        Wrought Aluminum (46)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(46)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(46)
    Applications
    Applications
    • Face MillingFace Milling (29)
    • PocketPocket (4)
    • Pocket HelicalPocket Helical (3)
    • Pocket MillingPocket Milling (29)
    • Profile MillingProfile Milling (29)
    • RampingRamping (29)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (29)
    • Shoulder MillingShoulder Milling (29)
    • Shoulder RoughingShoulder Roughing (29)
    • Shoulder Square EndShoulder Square End (29)
    • Slot MillingSlot Milling (25)
    • Slot SideSlot Side (25)
    • Slot Square EndSlot Square End (29)
    • Slot TSlot T (25)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(1)
    • 0.9843 in(2)
    • 1.0 in(2)
    • 1.25 in(3)
    • 1.2598 in(4)
    • 1.2599 in(1)
    • 1.5 in(1)
    • 1.5748 in(2)
    • 1.9685 in(3)
    • 2.0 in(3)
    • 2.4803 in(2)
    • 2.5 in(2)
    • 3.0 in(3)
    • 3.1496 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(3)
    • 25.4 mm(2)
    • 31.75 mm(3)
    • 32.0 mm(5)
    • 38.1 mm(1)
    • 40.0 mm(2)
    • 50.0 mm(3)
    • 50.8 mm(3)
    • 63.0 mm(2)
    • 63.5 mm(2)
    • 76.2 mm(3)
    • 80.0 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 15.994 mm(1)
    • 16.0 mm(30)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.6267 in(1)
    • 0.6299 in(21)
    • 0.63 in(9)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.2593 in(1)
    • 1.5748 in(3)
    • 1.7716 in(1)
    • 1.7717 in(4)
    • 1.9665 in(1)
    • 1.9685 in(11)
    • 2.0 in(2)
    • 2.75 in(1)
    • 2.9528 in(5)
    • 2.953 in(1)
    • 3.0 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 40.0 mm(3)
    • 45.0 mm(5)
    • 49.95 mm(1)
    • 50.0 mm(11)
    • 50.8 mm(2)
    • 69.85 mm(1)
    • 75.0 mm(7)
    • 76.2 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (31)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (16)
    • HSK (4)
    • Screw-On Connection (6)
    • Straight-Cylindrical (5)
    Number of Flutes
    Number of Flutes
    • 2 (8)
    • 3 (11)
    • 4 (8)
    • 5 (4)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5748 in(3)
    • 1.7716 in(1)
    • 1.7717 in(4)
    • 1.9685 in(6)
    • 2.0 in(2)
    • 2.8346 in(1)
    • 2.8347 in(1)
    • 2.8721 in(1)
    • 2.874 in(3)
    • 5.03 in(1)
    • 5.1575 in(1)
    • 5.2324 in(1)
    • 5.236 in(2)
    • 5.2362 in(1)
    • 5.28 in(1)
    • 5.315 in(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 40.0 mm(3)
    • 45.0 mm(5)
    • 50.0 mm(6)
    • 50.8 mm(2)
    • 72.0 mm(2)
    • 72.95 mm(1)
    • 73.0 mm(3)
    • 127.762 mm(1)
    • 131.0 mm(1)
    • 132.9 mm(1)
    • 133.0 mm(3)
    • 134.112 mm(1)
    • 135.0 mm(2)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.012 in(32)
    • 0.016 in(32)
    • 0.031 in(32)
    • 0.049 in(32)
    • 0.066 in(32)
    • 0.083 in(32)
    • 0.102 in(33)
    • 0.122 in(33)
    • 0.13 in(32)
    • 0.161 in(33)
    • 0.205 in(32)
    • 0.244 in(32)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 0.3 mm(32)
    • 0.4 mm(32)
    • 0.8 mm(32)
    • 1.25 mm(32)
    • 1.675 mm(32)
    • 2.1 mm(32)
    • 2.6 mm(33)
    • 3.1 mm(33)
    • 3.3 mm(32)
    • 4.1 mm(33)
    • 5.2 mm(32)
    • 6.2 mm(32)
    Corner Radius MinkomuCorner Radius Max
    application
    Hand Of Tool
    Hand Of Tool
    • R (31)
    Wiper Insert
    Wiper Insert
    • N (15)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 4.4 (2)
    • 4.6 (3)
    • 5.8 (2)
    • 5.9 (2)
    • 7.5 (2)
    • 7.6 (1)
    • 7.8 (4)
    • 7.9 (1)
    • 8.1 (1)
    • 11.4 (5)
    • 11.5 (3)
    • 14.5 (3)
    • 14.7 (2)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.9055 in(1)
    • 0.9451 in(1)
    • 0.9606 in(1)
    • 1.1368 in(1)
    • 1.1758 in(1)
    • 1.1806 in(1)
    • 1.2204 in(1)
    • 1.4303 in(1)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 23.0 mm(1)
    • 24.006 mm(1)
    • 24.4 mm(1)
    • 28.874 mm(1)
    • 29.865 mm(1)
    • 29.987 mm(1)
    • 30.998 mm(1)
    • 36.33 mm(1)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • Z-PARALLELOGRAM 89.27 (15)
    Cutting Edge Length
    Cutting Edge Length
    • 16.257 mm(2)
    • 16.37 mm(2)
    • 16.372 mm(1)
    • 16.373 mm(3)
    • 16.38 mm(1)
    • 16.4 mm(5)
    • 16.448 mm(1)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.64 in(2)
    • 0.6445 in(1)
    • 0.6446 in(4)
    • 0.645 in(2)
    • 0.646 in(5)
    • 0.6476 in(1)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • 721 (15)
    Cutting Tool Material
    Cutting Tool Material
    • H W (15)
    Tolerance Class
    Tolerance Class
    • E (15)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (5)
    • SCREW-ON (6)
    • SHELL MILL (16)
    • TAPER SHANK (4)
    System Size
    System Size
    • HSK63A (4)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(1)
    • 16.0 mm(1)
    • 19.05 mm(2)
    • 19.1 mm(1)
    • 21.0 mm(2)
    • 22.0 mm(3)
    • 22.01 mm(1)
    • 25.0 mm(1)
    • 25.4 mm(6)
    • 27.0 mm(2)
    • 29.0 mm(4)
    • 31.75 mm(1)
    • 32.0 mm(2)
    • 63.0 mm(4)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.6299 in(1)
    • 0.75 in(3)
    • 0.8268 in(2)
    • 0.8661 in(2)
    • 0.8666 in(2)
    • 0.9843 in(1)
    • 1.0 in(6)
    • 1.0629 in(1)
    • 1.063 in(1)
    • 1.1417 in(4)
    • 1.25 in(1)
    • 1.2598 in(2)
    • 2.48 in(2)
    • 2.4803 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • R (15)
    Number of Inserts
    Number of Inserts
    • 2.0 (8)
    • 3.0 (11)
    • 4.0 (8)
    • 5.0 (4)
    Number of Inserts MinkomuNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 1.9665 in(1)
    • 1.9685 in(5)
    • 2.75 in(1)
    • 2.9528 in(5)
    • 2.953 in(2)
    • 3.0 in(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 49.95 mm(1)
    • 50.0 mm(5)
    • 69.85 mm(1)
    • 75.0 mm(7)
    • 76.2 mm(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    5720VZD Aluminum • IC 16 • Stellram
    Cutters 5720 • Metric
    (17)

    Cutters 5720 • Metric

    Inserts 5720
    (15)

    Inserts 5720

    Cutters 5720 • Inch
    (14)

    Cutters 5720 • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk