Vítejte
Potvrďte své předvolby
Aktualizovat předvolby
Návrhy produktů
Product Family suggestions
Kennametal k vašim službám
Zakaznicke centrum
Vítejte, Přihlásit se
Vámi vybraný účet:
Vyskytl se problém s vaším účtem. Kontaktujte prosím zákaznickou podporu.
Účet kupujícího Změnit účet
Účet pro příjemce zásilky Změnit účet
- Ovládací panel
- Spravovat objednávky
- Spravovat kanály
- Adresář
Oznámení
Označit vše jako přečtené- Změnit heslo
- Můj profil
- Odhlásit se
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.
- Produkty
- /
- Nástroje pro obrábění kovů
- /
- Frézování
- /
- Frézovací nástroje
- /
- High-Feed Series
- /
- KSWM KenFeed™ High Feed Indexable Mills
KSWM • KenFeed™
Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
- P Steel (34)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(34)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(34)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(34)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(34)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(34)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(33)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(33)
- M Stainless Steel (33)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(33)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(33)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(33)
- K Cast Iron (34)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(34)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(34)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(34)
- N Non-Ferrous Materials (19)
- N1Wrought Aluminum (19)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
- N3High-Silicon Aluminum Alloys Si >12.2%(19)
- S High-Temp Alloys (33)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(33)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(33)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(33)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(33)
- H Hardened Materials (33)
- H1Hardened Materials 44-48 HRC(33)
Applications
Applications
Face Milling (29)
Pocket (29)
Pocket Helical (29)
Pocket Milling (29)
Pocket Plunge Milling (24)
Profile Milling (24)
Ramping (29)
Shoulder Milling (24)
Slot Milling (24)
=
Cutting Diameter
Cutting Diameter
- 0.75 in(1)
- 0.7874 in(3)
- 0.9843 in(2)
- 1.0 in(3)
- 1.25 in(1)
- 1.2598 in(3)
- 1.378 in(3)
- 1.5 in(1)
- 1.6535 in(3)
- 2.0 in(1)
- 2.0472 in(2)
- 2.5 in(1)
- 2.5984 in(1)
- 3.0 in(2)
- 3.1496 in(1)
- 4.0 in(1)
Cutting Diameter MinZadejte hodnotukomuCutting Diameter MaxCutting Diameter
=
Cutting Diameter
Cutting Diameter
- 19.05 mm(1)
- 20.0 mm(3)
- 25.0 mm(2)
- 25.4 mm(3)
- 31.75 mm(1)
- 32.0 mm(3)
- 35.0 mm(3)
- 38.1 mm(1)
- 42.0 mm(3)
- 50.8 mm(1)
- 52.0 mm(2)
- 63.5 mm(1)
- 66.0 mm(1)
- 76.2 mm(2)
- 80.0 mm(1)
- 101.6 mm(1)
Cutting Diameter MinZadejte hodnotukomuCutting Diameter MaxCutting Diameter
=
Cutting Length
Cutting Length
- 1.0 mm(6)
- 1.016 mm(2)
- 1.5 mm(21)
Cutting Length MinZadejte hodnotukomuCutting Length MaxCutting Length
=
Cutting Length
Cutting Length
- 0.0394 in(6)
- 0.04 in(2)
- 0.059 in(1)
- 0.0591 in(12)
- 0.06 in(8)
Cutting Length MinZadejte hodnotukomuCutting Length MaxCutting Length
=
Reach
Reach
- 1.1811 in(1)
- 1.378 in(1)
- 1.57 in(1)
- 1.5748 in(1)
- 1.575 in(1)
- 1.75 in(4)
- 1.7717 in(5)
- 1.9685 in(9)
- 2.0 in(3)
- 3.0 in(1)
- 4.0 in(1)
- 4.75 in(1)
Reach MinZadejte hodnotukomuReach MaxReach
=
Reach
Reach
- 30.0 mm(1)
- 35.0 mm(1)
- 39.878 mm(1)
- 40.0 mm(2)
- 44.45 mm(4)
- 45.0 mm(5)
- 50.0 mm(9)
- 50.8 mm(3)
- 76.2 mm(1)
- 101.6 mm(1)
- 120.65 mm(1)
Reach MinZadejte hodnotukomuReach MaxReach
=
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 11.5 (1)
- 90.0 (28)
Tool Cutting Edge Angle MinZadejte hodnotukomuTool Cutting Edge Angle MaxTool Cutting Edge Angle
Connection Style
Connection Style
- A-Socket Head Cap Screw (8)
- B-Cutter Retention Screw (2)
- Screw-On Connection (7)
- Straight-Cylindrical (12)
Number of Flutes
Number of Flutes
- 2 (8)
- 3 (9)
- 4 (6)
- 5 (5)
- 6 (1)
=
Over All Length [L]
Over All Length [L]
- 1.57 in(1)
- 1.575 in(1)
- 1.75 in(4)
- 1.9685 in(5)
- 2.2441 in(1)
- 2.7362 in(3)
- 2.8937 in(2)
- 5.1181 in(1)
- 5.5118 in(1)
- 5.543 in(2)
- 5.9055 in(1)
- 6.0 in(1)
- 6.543 in(1)
- 7.0 in(1)
- 7.0866 in(1)
- 7.874 in(2)
- 9.278 in(1)
Over All Length [L] MinZadejte hodnotukomuOver All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 39.878 mm(1)
- 40.0 mm(1)
- 44.45 mm(4)
- 50.0 mm(5)
- 57.0 mm(1)
- 69.5 mm(3)
- 73.5 mm(2)
- 130.0 mm(1)
- 140.0 mm(1)
- 140.8 mm(2)
- 150.0 mm(1)
- 152.4 mm(1)
- 166.2 mm(1)
- 177.8 mm(1)
- 180.0 mm(1)
- 200.0 mm(2)
- 235.65 mm(1)
Over All Length [L] MinZadejte hodnotukomuOver All Length [L] MaxOver All Length [L]
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC522M (33)
- KC525M (30)
Hand Of Tool
Hand Of Tool
- R (29)
Wiper Insert
Wiper Insert
- N (5)
=
Maximum Ramp Angle
Maximum Ramp Angle
- 1.4 (1)
- 1.5 (2)
- 2.0 (2)
- 2.5 (5)
- 3.0 (5)
- 3.5 (1)
- 4.0 (1)
- 4.5 (1)
- 4.8 (1)
- 5.0 (6)
- 5.5 (1)
- 7.5 (2)
- 10.8 (1)
Maximum Ramp Angle MinZadejte hodnotukomuMaximum Ramp Angle MaxMaximum Ramp Angle
frontEnd
=
Neck Diameter
Neck Diameter
- 0.709 in(1)
- 0.74 in(2)
- 0.827 in(1)
- 0.886 in(1)
- 1.142 in(5)
- 1.173 in(2)
- 1.2 in(1)
- 1.24 in(1)
Neck Diameter MinZadejte hodnotukomuNeck Diameter MaxNeck Diameter
=
Neck Diameter
Neck Diameter
- 18.0 mm(1)
- 18.8 mm(2)
- 21.0 mm(1)
- 22.5 mm(1)
- 29.0 mm(5)
- 29.8 mm(2)
- 30.48 mm(1)
- 31.5 mm(1)
Neck Diameter MinZadejte hodnotukomuNeck Diameter MaxNeck Diameter
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
- W-TRIGON 80 (5)
=
Insert IC Size
Insert IC Size
- 7.94 mm(2)
- 9.525 mm(2)
- 12.87 mm(1)
Insert IC Size MinZadejte hodnotukomuInsert IC Size MaxInsert IC Size
=
Insert IC Size
Insert IC Size
- 0.3125 in(2)
- 0.375 in(2)
- 0.5067 in(1)
Insert IC Size MinZadejte hodnotukomuInsert IC Size MaxInsert IC Size
Chip Breaker CBMD
Chip Breaker CBMD
- GP (4)
- HN (1)
Cutting Tool Material
Cutting Tool Material
- H W (5)
Tolerance Class
Tolerance Class
- M (5)
backEnd
Connection Type
Connection Type
- CYLINDRICAL (12)
- SCREW-ON (7)
- SHELL MILL (10)
=
Back-End Diameter
Back-End Diameter
- 16.0 mm(1)
- 18.0 mm(1)
- 19.05 mm(2)
- 20.0 mm(2)
- 21.0 mm(1)
- 22.0 mm(2)
- 25.0 mm(1)
- 25.4 mm(5)
- 27.0 mm(2)
- 29.0 mm(5)
- 31.75 mm(4)
- 32.0 mm(3)
Back-End Diameter MinZadejte hodnotukomuBack-End Diameter MaxBack-End Diameter
=
Back-End Diameter
Back-End Diameter
- 0.6299 in(1)
- 0.7087 in(1)
- 0.75 in(2)
- 0.7874 in(2)
- 0.8268 in(1)
- 0.8661 in(2)
- 0.9843 in(1)
- 1.0 in(5)
- 1.063 in(2)
- 1.1417 in(5)
- 1.25 in(4)
- 1.2598 in(3)
Back-End Diameter MinZadejte hodnotukomuBack-End Diameter MaxBack-End Diameter
other
Insert Hand
Insert Hand
- R (5)
=
Number of Inserts
Number of Inserts
- 2.0 (8)
- 3.0 (9)
- 4.0 (6)
- 5.0 (5)
- 6.0 (1)
Number of Inserts MinZadejte hodnotukomuNumber of Inserts MaxNumber of Inserts
=
Head Length [L2]
Head Length [L2]
- 1.1811 in(1)
- 1.378 in(1)
- 1.5748 in(1)
- 1.7717 in(5)
- 1.9685 in(5)
- 2.0 in(3)
- 3.0 in(1)
- 4.0 in(1)
- 4.75 in(1)
Head Length [L2] MinZadejte hodnotukomuHead Length [L2] MaxHead Length [L2]
=
Head Length [L2]
Head Length [L2]
- 30.0 mm(1)
- 35.0 mm(1)
- 40.0 mm(1)
- 45.0 mm(5)
- 50.0 mm(5)
- 50.8 mm(3)
- 76.2 mm(1)
- 101.6 mm(1)
- 120.65 mm(1)
Head Length [L2] MinZadejte hodnotukomuHead Length [L2] MaxHead Length [L2]
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
