Vítejte
Potvrďte své předvolby
Aktualizovat předvolby
Návrhy produktů
Product Family suggestions
Kennametal k vašim službám
Zakaznicke centrum
Vítejte, Přihlásit se
Vámi vybraný účet:
Vyskytl se problém s vaším účtem. Kontaktujte prosím zákaznickou podporu.
Účet kupujícího Změnit účet
Účet pro příjemce zásilky Změnit účet
- Ovládací panel
- Spravovat objednávky
- Spravovat kanály
- Adresář
Oznámení
Označit vše jako přečtené- Změnit heslo
- Můj profil
- Odhlásit se
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.
- Produkty
- /
- Nástroje pro obrábění kovů
- /
- Frézování
- /
- Frézovací nástroje
- /
- High-Feed Series
- /
- KenFeed™ Mini High Feed Indexable Mills
KenFeed™ Mini
Vybrat filtry
Filtry
Filtry
Zobrazit filtry v
Metrické
Palcové
keyFilters
Workpiece Material
Workpiece Material
- P Steel (21)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(20)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(20)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(20)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(21)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(20)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(20)
- M Stainless Steel (20)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(20)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(20)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(20)
- K Cast Iron (20)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(20)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(20)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(20)
- N Non-Ferrous Materials (18)
- N1Wrought Aluminum (18)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(18)
- N3High-Silicon Aluminum Alloys Si >12.2%(18)
- S High-Temp Alloys (20)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(20)
- H Hardened Materials (19)
- H1Hardened Materials 44-48 HRC(19)
Applications
Applications
Face Milling (17)
Pocket (17)
Pocket Helical (17)
Pocket Milling (17)
Pocket Plunge Milling (17)
Profile Milling (17)
Ramping (17)
Shoulder Milling (17)
Slot Milling (17)
=
Cutting Diameter
Cutting Diameter
- 0.329 in(1)
- 0.393 in(1)
- 0.398 in(2)
- 0.414 in(1)
- 0.461 in(1)
- 0.485 in(1)
- 0.49 in(1)
- 0.492 in(1)
- 0.529 in(1)
- 0.561 in(1)
- 0.641 in(1)
- 0.692 in(1)
- 0.702 in(1)
- 0.74 in(2)
- 0.883 in(1)
Cutting Diameter MinZadejte hodnotukomuCutting Diameter MaxCutting Diameter
=
Cutting Diameter
Cutting Diameter
- 8.36 mm(1)
- 9.98 mm(1)
- 10.0 mm(1)
- 10.1 mm(1)
- 10.53 mm(1)
- 11.7 mm(1)
- 12.32 mm(1)
- 12.5 mm(2)
- 13.0 mm(1)
- 14.24 mm(1)
- 16.29 mm(1)
- 17.6 mm(1)
- 17.8 mm(1)
- 18.8 mm(2)
- 22.4 mm(1)
Cutting Diameter MinZadejte hodnotukomuCutting Diameter MaxCutting Diameter
=
Cutting Length
Cutting Length
- 0.84 mm(5)
- 1.02 mm(12)
Cutting Length MinZadejte hodnotukomuCutting Length MaxCutting Length
=
Cutting Length
Cutting Length
- 0.033 in(5)
- 0.04 in(12)
Cutting Length MinZadejte hodnotukomuCutting Length MaxCutting Length
=
Reach
Reach
- 0.984 in(1)
- 1.0 in(2)
- 1.18 in(1)
- 1.181 in(1)
- 1.378 in(1)
- 1.391 in(2)
- 1.693 in(1)
- 1.969 in(1)
- 2.178 in(1)
- 2.237 in(1)
- 2.242 in(2)
- 2.258 in(1)
- 2.359 in(1)
- 2.394 in(1)
Reach MinZadejte hodnotukomuReach MaxReach
=
Reach
Reach
- 25.0 mm(1)
- 25.4 mm(2)
- 30.0 mm(2)
- 35.0 mm(1)
- 35.33 mm(1)
- 35.34 mm(1)
- 43.0 mm(1)
- 50.0 mm(1)
- 55.32 mm(1)
- 56.82 mm(1)
- 56.94 mm(2)
- 57.4 mm(1)
- 59.9 mm(1)
- 60.8 mm(1)
Reach MinZadejte hodnotukomuReach MaxReach
=
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 12.0 (6)
- 78.0 (7)
- 90.0 (4)
Tool Cutting Edge Angle MinZadejte hodnotukomuTool Cutting Edge Angle MaxTool Cutting Edge Angle
Connection Style
Connection Style
- Screw-On Connection (6)
- Straight-Cylindrical (11)
Number of Flutes
Number of Flutes
- 2 (5)
- 3 (6)
- 4 (5)
- 5 (1)
Internal Coolant Capability
Internal Coolant Capability
=
Over All Length [L]
Over All Length [L]
- 1.681 in(1)
- 1.697 in(1)
- 1.968 in(1)
- 1.9685 in(1)
- 2.244 in(1)
- 2.6575 in(1)
- 3.362 in(1)
- 4.331 in(2)
- 4.5 in(1)
- 4.724 in(1)
- 4.8 in(1)
- 5.905 in(1)
- 6.0 in(2)
- 6.693 in(1)
- 7.874 in(1)
Over All Length [L] MinZadejte hodnotukomuOver All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 42.7 mm(1)
- 43.1 mm(1)
- 50.0 mm(2)
- 57.0 mm(1)
- 67.5 mm(1)
- 85.4 mm(1)
- 110.0 mm(2)
- 114.3 mm(1)
- 120.0 mm(1)
- 121.92 mm(1)
- 150.0 mm(1)
- 152.4 mm(2)
- 170.0 mm(1)
- 200.0 mm(1)
Over All Length [L] MinZadejte hodnotukomuOver All Length [L] MaxOver All Length [L]
cornerConfiguration
≈
Corner Radius
Corner Radius
- 0.016 in(21)
- 0.492 in(1)
- 0.63 in(2)
- 0.984 in(2)
Corner Radius MinZadejte hodnotukomuCorner Radius MaxCorner Radius
≈
Corner Radius
Corner Radius
- 0.4 mm(21)
- 12.5 mm(1)
- 16.0 mm(2)
- 25.0 mm(2)
Corner Radius MinZadejte hodnotukomuCorner Radius MaxCorner Radius
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K110M (1)
- KC510M (17)
- KC522M (18)
- KC725M (18)
- KCKP10 (18)
- KCPK30 (22)
Hand Of Tool
Hand Of Tool
- R (17)
Wiper Insert
Wiper Insert
- N (9)
=
Maximum Ramp Angle
Maximum Ramp Angle
- 2.0 (1)
- 3.0 (1)
- 3.3 (3)
- 4.5 (1)
- 4.7 (1)
- 5.3 (4)
- 7.0 (3)
- 7.4 (1)
- 8.5 (2)
Maximum Ramp Angle MinZadejte hodnotukomuMaximum Ramp Angle MaxMaximum Ramp Angle
frontEnd
=
Neck Diameter
Neck Diameter
- 0.539 in(1)
- 0.683 in(1)
- 0.728 in(2)
- 0.902 in(2)
- 0.921 in(1)
- 0.933 in(1)
Neck Diameter MinZadejte hodnotukomuNeck Diameter MaxNeck Diameter
=
Neck Diameter
Neck Diameter
- 13.7 mm(1)
- 17.35 mm(1)
- 18.5 mm(2)
- 22.9 mm(2)
- 23.4 mm(1)
- 23.7 mm(1)
Neck Diameter MinZadejte hodnotukomuNeck Diameter MaxNeck Diameter
Center Cutting
Center Cutting
insertGeometry
Shape
Shape
- W-TRIGON 80 (9)
=
Insert IC Size
Insert IC Size
- 5.5 mm(4)
- 8.5 mm(1)
- 11.18 mm(2)
- 12.7 mm(2)
Insert IC Size MinZadejte hodnotukomuInsert IC Size MaxInsert IC Size
=
Insert IC Size
Insert IC Size
- 0.2165 in(4)
- 0.3346 in(1)
- 0.4402 in(2)
- 0.5 in(2)
Insert IC Size MinZadejte hodnotukomuInsert IC Size MaxInsert IC Size
Chip Breaker CBMD
Chip Breaker CBMD
- GD (3)
- GN (2)
- LD (3)
- LN (1)
Cutting Tool Material
Cutting Tool Material
- H W (9)
Tolerance Class
Tolerance Class
- G (9)
backEnd
Connection Type
Connection Type
- CYLINDRICAL (11)
- SCREW-ON (6)
=
Back-End Diameter
Back-End Diameter
- 13.0 mm(2)
- 15.875 mm(1)
- 16.0 mm(2)
- 17.75 mm(1)
- 18.0 mm(1)
- 19.05 mm(2)
- 20.0 mm(1)
- 21.0 mm(1)
- 25.0 mm(3)
- 25.4 mm(2)
- 29.0 mm(1)
Back-End Diameter MinZadejte hodnotukomuBack-End Diameter MaxBack-End Diameter
=
Back-End Diameter
Back-End Diameter
- 0.5118 in(1)
- 0.512 in(1)
- 0.625 in(1)
- 0.63 in(2)
- 0.699 in(1)
- 0.7087 in(1)
- 0.75 in(2)
- 0.787 in(1)
- 0.827 in(1)
- 0.984 in(3)
- 1.0 in(2)
- 1.142 in(1)
Back-End Diameter MinZadejte hodnotukomuBack-End Diameter MaxBack-End Diameter
other
Insert Hand
Insert Hand
- N (9)
=
Number of Inserts
Number of Inserts
- 2.0 (5)
- 3.0 (6)
- 4.0 (5)
- 5.0 (1)
Number of Inserts MinZadejte hodnotukomuNumber of Inserts MaxNumber of Inserts
=
Head Length [L2]
Head Length [L2]
- 0.984 in(1)
- 1.0 in(2)
- 1.18 in(1)
- 1.181 in(1)
- 1.378 in(1)
- 1.391 in(2)
- 1.693 in(1)
- 1.969 in(1)
- 2.178 in(1)
- 2.237 in(1)
- 2.242 in(2)
- 2.2588 in(1)
- 2.359 in(1)
- 2.394 in(1)
Head Length [L2] MinZadejte hodnotukomuHead Length [L2] MaxHead Length [L2]
=
Head Length [L2]
Head Length [L2]
- 25.0 mm(1)
- 25.4 mm(2)
- 30.0 mm(2)
- 35.0 mm(1)
- 35.33 mm(1)
- 35.34 mm(1)
- 43.0 mm(1)
- 50.0 mm(1)
- 55.32 mm(1)
- 56.82 mm(1)
- 56.94 mm(2)
- 57.4 mm(1)
- 59.9 mm(1)
- 60.8 mm(1)
Head Length [L2] MinZadejte hodnotukomuHead Length [L2] MaxHead Length [L2]
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
KenFeed™ Mini High Feed Indexable Mills
