Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

KDMR Platform

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (42)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(42)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(42)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(42)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(42)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(42)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(42)
    • M Stainless Steel (42)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(42)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(42)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(42)
    Applications
    Applications
    • DrillingDrilling (34)
    • PocketPocket (34)
    • Pocket HelicalPocket Helical (34)
    • Pocket MillingPocket Milling (34)
    • Pocket Plunge MillingPocket Plunge Milling (34)
    • RampingRamping (34)
    • Slot MillingSlot Milling (34)
    • Slot Square EndSlot Square End (34)
    Cutting Diameter
    Cutting Diameter
    • 0.6299 in(4)
    • 0.63 in(1)
    • 0.6693 in(2)
    • 0.787 in(1)
    • 0.7874 in(4)
    • 0.8268 in(2)
    • 0.9843 in(4)
    • 1.0 in(1)
    • 1.0236 in(3)
    • 1.25 in(1)
    • 1.2598 in(4)
    • 1.2992 in(1)
    • 1.5 in(1)
    • 1.5748 in(3)
    • 1.9685 in(1)
    • 1.984 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 16.0 mm(4)
    • 16.002 mm(1)
    • 17.0 mm(2)
    • 19.99 mm(1)
    • 20.0 mm(4)
    • 21.0 mm(2)
    • 25.0 mm(4)
    • 25.4 mm(1)
    • 26.0 mm(3)
    • 31.75 mm(1)
    • 32.0 mm(4)
    • 33.0 mm(1)
    • 38.1 mm(1)
    • 40.0 mm(3)
    • 50.0 mm(1)
    • 50.394 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 19.0 mm(7)
    • 22.0 mm(7)
    • 27.99 mm(1)
    • 28.0 mm(7)
    • 35.99 mm(1)
    • 36.0 mm(5)
    • 42.0 mm(3)
    • 42.01 mm(1)
    • 54.0 mm(2)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.748 in(7)
    • 0.866 in(1)
    • 0.8661 in(6)
    • 1.102 in(1)
    • 1.1024 in(7)
    • 1.417 in(1)
    • 1.4173 in(5)
    • 1.6535 in(3)
    • 1.654 in(1)
    • 2.126 in(2)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 1.195 in(1)
    • 1.22 in(2)
    • 1.2205 in(2)
    • 1.3386 in(1)
    • 1.35 in(1)
    • 1.378 in(3)
    • 1.5748 in(3)
    • 1.575 in(3)
    • 1.968 in(3)
    • 1.9685 in(1)
    • 2.008 in(1)
    • 2.087 in(1)
    • 2.126 in(1)
    • 2.1654 in(3)
    • 2.401 in(1)
    • 2.48 in(1)
    • 2.712 in(1)
    • 2.7559 in(1)
    • 2.756 in(1)
    • 3.15 in(2)
    • 3.543 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 30.353 mm(1)
    • 31.0 mm(4)
    • 34.0 mm(1)
    • 34.29 mm(1)
    • 35.0 mm(3)
    • 40.0 mm(6)
    • 50.0 mm(4)
    • 51.0 mm(1)
    • 53.0 mm(1)
    • 54.0 mm(1)
    • 55.0 mm(3)
    • 61.0 mm(1)
    • 63.0 mm(1)
    • 68.885 mm(1)
    • 70.0 mm(2)
    • 80.0 mm(2)
    • 90.0 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (34)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (27)
    • Weldon (7)
    Number of Flutes
    Number of Flutes
    • 2 (34)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 3.1496 in(1)
    • 3.3465 in(1)
    • 3.7402 in(2)
    • 4.3307 in(1)
    • 4.699 in(1)
    • 4.7244 in(2)
    • 5.091 in(1)
    • 5.1181 in(3)
    • 5.486 in(1)
    • 5.5118 in(4)
    • 5.858 in(1)
    • 5.9055 in(3)
    • 6.26 in(1)
    • 6.2992 in(1)
    • 6.649 in(1)
    • 6.6929 in(1)
    • 7.0866 in(1)
    • 7.4803 in(2)
    • 7.874 in(2)
    • 8.6614 in(2)
    • 9.0551 in(1)
    • 9.4488 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 80.0 mm(1)
    • 85.0 mm(1)
    • 95.0 mm(2)
    • 110.0 mm(1)
    • 119.355 mm(1)
    • 120.0 mm(2)
    • 129.311 mm(1)
    • 130.0 mm(3)
    • 139.344 mm(1)
    • 140.0 mm(4)
    • 148.793 mm(1)
    • 150.0 mm(3)
    • 159.004 mm(1)
    • 160.0 mm(1)
    • 168.885 mm(1)
    • 170.0 mm(1)
    • 180.0 mm(1)
    • 190.0 mm(2)
    • 200.0 mm(2)
    • 220.0 mm(2)
    • 230.0 mm(1)
    • 240.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Hand Of Tool
    Hand Of Tool
    • R (34)
    Wiper Insert
    Wiper Insert
    • N (8)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 8.0 (34)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • L-RECTANGLE 90 (38)
    • X-PARALLELOGRAM 80 (38)
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • L-RECTANGLE 90 (4)
    • X-PARALLELOGRAM 80 (4)
    Cutting Edge Length
    Cutting Edge Length
    • 8.5 mm(1)
    • 8.7 mm(1)
    • 10.2 mm(1)
    • 10.7 mm(1)
    • 13.2 mm(2)
    • 16.7 mm(2)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.335 in(1)
    • 0.343 in(1)
    • 0.402 in(1)
    • 0.421 in(1)
    • 0.52 in(2)
    • 0.657 in(2)
    Cutting Edge Length MinkomuCutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • LD (4)
    • LF (4)
    Cutting Tool Material
    Cutting Tool Material
    • H W (8)
    Tolerance Class
    Tolerance Class
    • M (8)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (34)
    Back-End Diameter
    Back-End Diameter
    • 15.875 mm(1)
    • 16.0 mm(6)
    • 19.05 mm(1)
    • 20.0 mm(6)
    • 25.0 mm(7)
    • 25.4 mm(1)
    • 31.75 mm(2)
    • 32.0 mm(8)
    • 38.1 mm(1)
    • 40.0 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.625 in(1)
    • 0.6299 in(6)
    • 0.75 in(1)
    • 0.7874 in(6)
    • 0.9843 in(7)
    • 1.0 in(1)
    • 1.25 in(2)
    • 1.2598 in(8)
    • 1.5 in(1)
    • 1.5748 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • R (8)
    Number of Inserts
    Number of Inserts
    • 4.0 (28)
    • 7.0 (6)
    Number of Inserts MinkomuNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 1.195 in(1)
    • 1.2205 in(4)
    • 1.35 in(1)
    • 1.378 in(4)
    • 1.549 in(1)
    • 1.5748 in(5)
    • 1.921 in(1)
    • 1.9685 in(3)
    • 2.0079 in(1)
    • 2.0866 in(1)
    • 2.126 in(1)
    • 2.1654 in(3)
    • 2.4016 in(1)
    • 2.4803 in(1)
    • 2.712 in(1)
    • 2.7559 in(2)
    • 3.1496 in(2)
    • 3.5433 in(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 30.353 mm(1)
    • 31.0 mm(4)
    • 34.29 mm(1)
    • 35.0 mm(4)
    • 39.345 mm(1)
    • 40.0 mm(5)
    • 48.793 mm(1)
    • 50.0 mm(3)
    • 51.0 mm(1)
    • 53.0 mm(1)
    • 54.0 mm(1)
    • 55.0 mm(3)
    • 61.0 mm(1)
    • 63.0 mm(1)
    • 68.885 mm(1)
    • 70.0 mm(2)
    • 80.0 mm(2)
    • 90.0 mm(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    KDMR Platform
    KDMR • Válcová stopka • Multifunkční • Metrické
    (9)

    KDMR • Válcová stopka • Multifunkční • Metrické

    KDMR • Válcová stopka • Multifunkční • Metrické
    (4)

    KDMR • Válcová stopka • Multifunkční • Metrické

    KDMR • Válcová stopka • Dlouhá stopka • Metrické
    (15)

    KDMR • Válcová stopka • Dlouhá stopka • Metrické

    KDMR • Cylindrical Shank • Multifunctional • Inch
    (6)

    KDMR • Cylindrical Shank • Multifunctional • Inch

    Břitové destičky pro KDMR • JOMT-LF
    (4)

    Břitové destičky pro KDMR • JOMT-LF

    Insert for KDMR • GOMT-LD
    (4)

    Insert for KDMR • GOMT-LD

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk