Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.

5505VX Ball Nose End Mills • Stellram

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (44)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(44)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(44)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(44)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(44)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(44)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(44)
    • M Stainless Steel (44)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(44)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(44)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(44)
    • S High-Temp Alloys (44)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(44)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(44)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(44)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(44)
    Applications
    Applications
    • Face MillingFace Milling (36)
    • Profile MillingProfile Milling (36)
    • RampingRamping (36)
    • Shoulder Ball NoseShoulder Ball Nose (36)
    • Shoulder Bottom ShoulderShoulder Bottom Shoulder (36)
    • Shoulder MillingShoulder Milling (36)
    • Shoulder RoughingShoulder Roughing (36)
    • Slot Ball NoseSlot Ball Nose (36)
    • Slot MillingSlot Milling (36)
    • Slot SideSlot Side (36)
    Cutting Diameter
    Cutting Diameter
    • 0.625 in(3)
    • 0.6299 in(2)
    • 0.75 in(4)
    • 0.787 in(1)
    • 0.7874 in(2)
    • 0.984 in(1)
    • 0.9843 in(4)
    • 1.0 in(3)
    • 1.25 in(4)
    • 1.2598 in(2)
    • 1.2599 in(2)
    • 1.5 in(2)
    • 1.5748 in(1)
    • 1.575 in(1)
    • 1.969 in(2)
    • 2.0 in(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 15.874 mm(1)
    • 15.875 mm(1)
    • 15.876 mm(1)
    • 16.0 mm(2)
    • 19.0 mm(1)
    • 19.05 mm(3)
    • 20.0 mm(3)
    • 25.0 mm(5)
    • 25.4 mm(3)
    • 31.75 mm(4)
    • 32.0 mm(4)
    • 38.1 mm(2)
    • 40.0 mm(2)
    • 50.0 mm(2)
    • 50.8 mm(2)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Length
    Cutting Length
    • 16.0 mm(5)
    • 16.6 mm(1)
    • 19.05 mm(3)
    • 20.0 mm(2)
    • 20.3 mm(1)
    • 25.0 mm(8)
    • 32.0 mm(8)
    • 38.1 mm(2)
    • 40.0 mm(2)
    • 50.8 mm(1)
    • 51.0 mm(3)
    Cutting Length MinkomuCutting Length Max
    Cutting Length
    Cutting Length
    • 0.6299 in(2)
    • 0.63 in(3)
    • 0.654 in(1)
    • 0.75 in(3)
    • 0.787 in(2)
    • 0.799 in(1)
    • 0.984 in(8)
    • 1.26 in(8)
    • 1.5 in(2)
    • 1.575 in(2)
    • 2.0 in(1)
    • 2.008 in(3)
    Cutting Length MinkomuCutting Length Max
    Reach
    Reach
    • 0.9843 in(1)
    • 1.0 in(1)
    • 1.181 in(1)
    • 1.1811 in(1)
    • 1.283 in(1)
    • 1.378 in(3)
    • 1.575 in(5)
    • 1.9685 in(2)
    • 2.0 in(1)
    • 2.165 in(1)
    • 2.347 in(1)
    • 2.369 in(1)
    • 2.559 in(2)
    • 2.5591 in(2)
    • 2.717 in(1)
    • 2.9606 in(1)
    • 3.0 in(1)
    • 3.937 in(3)
    • 3.9961 in(1)
    • 4.0 in(2)
    • 5.9055 in(1)
    • 5.906 in(1)
    • 5.9961 in(1)
    • 6.08 in(1)
    Reach MinkomuReach Max
    Reach
    Reach
    • 25.0 mm(1)
    • 25.4 mm(1)
    • 30.0 mm(2)
    • 32.58 mm(1)
    • 35.0 mm(3)
    • 40.0 mm(5)
    • 50.0 mm(2)
    • 50.8 mm(1)
    • 55.0 mm(1)
    • 59.61 mm(1)
    • 60.17 mm(1)
    • 65.0 mm(4)
    • 69.0 mm(1)
    • 75.2 mm(1)
    • 76.2 mm(1)
    • 100.0 mm(3)
    • 101.5 mm(1)
    • 101.6 mm(2)
    • 150.0 mm(2)
    • 152.3 mm(1)
    • 154.43 mm(1)
    Reach MinkomuReach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (36)
    Tool Cutting Edge Angle MinkomuTool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Screw-On Connection (8)
    • Straight-Cylindrical (11)
    • Weldon (17)
    Number of Flutes
    Number of Flutes
    • 2 (36)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.6929 in(1)
    • 1.709 in(1)
    • 2.126 in(2)
    • 2.441 in(2)
    • 2.874 in(2)
    • 4.173 in(1)
    • 4.278 in(1)
    • 4.567 in(1)
    • 4.65 in(1)
    • 5.0 in(1)
    • 5.2803 in(1)
    • 5.3228 in(1)
    • 5.5 in(1)
    • 5.9055 in(1)
    • 6.2803 in(1)
    • 6.2992 in(1)
    • 6.685 in(1)
    • 6.687 in(1)
    • 6.6929 in(1)
    • 6.693 in(1)
    • 7.0 in(1)
    • 7.0866 in(1)
    • 7.874 in(1)
    • 8.0 in(1)
    • 8.6614 in(1)
    • 8.6843 in(1)
    • 9.055 in(1)
    • 9.328 in(1)
    • 9.8425 in(1)
    • 9.843 in(2)
    • 10.0 in(1)
    • 10.079 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 43.0 mm(1)
    • 43.4 mm(1)
    • 54.0 mm(2)
    • 62.0 mm(2)
    • 73.0 mm(2)
    • 106.0 mm(1)
    • 108.65 mm(1)
    • 116.0 mm(1)
    • 118.11 mm(1)
    • 127.0 mm(1)
    • 134.12 mm(1)
    • 135.2 mm(1)
    • 139.7 mm(1)
    • 150.0 mm(1)
    • 159.52 mm(1)
    • 160.0 mm(1)
    • 169.8 mm(1)
    • 169.84 mm(1)
    • 170.0 mm(2)
    • 177.8 mm(1)
    • 180.0 mm(1)
    • 200.0 mm(1)
    • 203.2 mm(1)
    • 220.0 mm(1)
    • 220.58 mm(1)
    • 230.0 mm(1)
    • 236.94 mm(1)
    • 250.0 mm(3)
    • 254.0 mm(1)
    • 256.0 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.312 in(6)
    • 0.375 in(5)
    • 0.392 in(4)
    • 0.492 in(9)
    • 0.625 in(9)
    • 0.768 in(3)
    • 0.787 in(3)
    • 1.0 in(5)
    Corner Radius MinkomuCorner Radius Max
    Corner Radius
    Corner Radius
    • 7.925 mm(6)
    • 9.525 mm(5)
    • 9.95 mm(4)
    • 12.5 mm(9)
    • 15.875 mm(9)
    • 19.5 mm(3)
    • 20.0 mm(3)
    • 25.4 mm(5)
    Corner Radius MinkomuCorner Radius Max
    application
    Hand Of Tool
    Hand Of Tool
    • R (36)
    Wiper Insert
    Wiper Insert
    • N (8)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 85.0 (36)
    Maximum Ramp Angle MinkomuMaximum Ramp Angle Max
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.5512 in(1)
    • 0.567 in(2)
    • 0.689 in(1)
    • 0.709 in(1)
    • 0.718 in(1)
    • 0.728 in(1)
    • 0.732 in(1)
    • 0.88 in(4)
    • 0.896 in(1)
    • 0.929 in(1)
    • 1.1142 in(6)
    • 1.4055 in(2)
    • 1.4488 in(2)
    • 1.503 in(1)
    • 1.874 in(3)
    Neck Diameter MinkomuNeck Diameter Max
    Neck Diameter
    Neck Diameter
    • 14.0 mm(1)
    • 14.4 mm(2)
    • 17.49 mm(1)
    • 18.0 mm(1)
    • 18.24 mm(1)
    • 18.5 mm(1)
    • 18.6 mm(1)
    • 22.34 mm(4)
    • 22.77 mm(1)
    • 23.6 mm(1)
    • 28.3 mm(6)
    • 35.7 mm(2)
    • 36.8 mm(2)
    • 38.17 mm(1)
    • 47.6 mm(3)
    Neck Diameter MinkomuNeck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Insert IC Size
    Insert IC Size
    • 7.391 mm(1)
    • 8.534 mm(1)
    • 9.0 mm(1)
    • 11.0 mm(1)
    • 14.097 mm(1)
    • 17.0 mm(1)
    • 18.0 mm(1)
    • 22.25 mm(1)
    Insert IC Size MinkomuInsert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.291 in(1)
    • 0.336 in(1)
    • 0.3543 in(1)
    • 0.4331 in(1)
    • 0.555 in(1)
    • 0.669 in(1)
    • 0.7087 in(1)
    • 0.876 in(1)
    Insert IC Size MinkomuInsert IC Size Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (8)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (28)
    • SCREW-ON (8)
    Back-End Diameter
    Back-End Diameter
    • 13.0 mm(2)
    • 15.87 mm(1)
    • 18.0 mm(2)
    • 19.04 mm(1)
    • 19.05 mm(1)
    • 20.0 mm(1)
    • 21.0 mm(2)
    • 25.0 mm(4)
    • 25.39 mm(1)
    • 25.4 mm(3)
    • 29.0 mm(2)
    • 31.75 mm(3)
    • 32.0 mm(5)
    • 38.1 mm(3)
    • 40.0 mm(3)
    • 50.0 mm(1)
    • 50.8 mm(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5118 in(1)
    • 0.512 in(1)
    • 0.625 in(1)
    • 0.709 in(2)
    • 0.75 in(2)
    • 0.7874 in(1)
    • 0.827 in(2)
    • 0.984 in(4)
    • 1.0 in(4)
    • 1.1417 in(2)
    • 1.25 in(3)
    • 1.26 in(5)
    • 1.5 in(3)
    • 1.575 in(3)
    • 1.969 in(1)
    • 2.0 in(1)
    Back-End Diameter MinkomuBack-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • R (8)
    Number of Inserts
    Number of Inserts
    • 2.0 (36)
    Number of Inserts MinkomuNumber of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 0.9843 in(1)
    • 1.0 in(1)
    • 1.378 in(2)
    • 1.5748 in(1)
    • 1.575 in(4)
    • 1.9685 in(2)
    • 1.969 in(2)
    • 2.0 in(2)
    • 2.165 in(2)
    • 2.347 in(1)
    • 2.369 in(1)
    • 2.559 in(1)
    • 2.5591 in(1)
    • 2.9528 in(1)
    • 2.9606 in(1)
    • 3.0 in(1)
    • 3.937 in(3)
    • 3.9961 in(1)
    • 4.0 in(2)
    • 5.9055 in(1)
    • 5.906 in(1)
    • 5.9961 in(1)
    • 6.08 in(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 25.0 mm(1)
    • 25.4 mm(1)
    • 35.0 mm(2)
    • 40.0 mm(5)
    • 50.0 mm(4)
    • 50.8 mm(2)
    • 55.0 mm(2)
    • 59.61 mm(1)
    • 60.17 mm(1)
    • 65.0 mm(2)
    • 75.0 mm(1)
    • 75.2 mm(1)
    • 76.2 mm(1)
    • 100.0 mm(3)
    • 101.5 mm(1)
    • 101.6 mm(2)
    • 150.0 mm(2)
    • 152.3 mm(1)
    • 154.43 mm(1)
    Head Length [L2] MinkomuHead Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    5505VX Ball Nose End Mills • Stellram
    XPNT-F • Stellram
    (8)

    XPNT-F • Stellram

    5505VX Weldon End Mills • Stellram • Metrické
    (7)

    5505VX Weldon End Mills • Stellram • Metrické

    5505VX Cylindrical End Mills • Stellram • Inch
    (6)

    5505VX Cylindrical End Mills • Stellram • Inch

    5505VX Cylindrical End Mills • Stellram • Metrické
    (5)

    5505VX Cylindrical End Mills • Stellram • Metrické

    5505VX Weldon End Mills • Stellram • Inch
    (7)

    5505VX Weldon End Mills • Stellram • Inch

    5505VX Modular Head Screw-On End Mills • Stellram • Inch
    (4)

    5505VX Modular Head Screw-On End Mills • Stellram • Inch

    5505VX Modular Head Screw-On End Mills • Stellram • Metrické
    (4)

    5505VX Modular Head Screw-On End Mills • Stellram • Metrické

    5505VX Weldon End Mills Flat • Stellram • Metrické
    (2)

    5505VX Weldon End Mills Flat • Stellram • Metrické

    5505VX Weldon End Mills Flat • Stellram • Inch
    (1)

    5505VX Weldon End Mills Flat • Stellram • Inch

    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk