Vítejte
Potvrďte své předvolby
Aktualizovat předvolby

Návrhy produktů

Product Family suggestions

Kennametal k vašim službám

Zakaznicke centrum

Najděte kontaktní údaje zákaznické podpory po celém světě.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
Položka (položky) úspěšně přidáno do košíku
Zobrazit košík
Položka (položky) are being added to the cart
Zobrazit košík
Frézujte více za méně s našimi časově omezenými nabídkami! Nakupujte nyní.
Read More

Lower forces, even better reliability

The HPX drill produces consistently higher tool life in steel than competitive tools, even when feeds and speeds are significantly increased.

Special gashing on the HPX drill improves the chip formation and curls a smaller chip. The material specific HPX point geometry creates significantly lower cutting forces, which works great for machines with lower spindle capabilities, unstable cutting conditions, or unstable workpiece clamping. A continuous cross section makes the HPX drill more resistant against tool breakage, and the ultrahigh polished chip flutes ensure superior chip evacuation.

Vybrat filtry
Filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (756)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(756)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(756)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(756)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(756)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(756)
    • K Cast Iron (265)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(265)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(265)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(265)
    Applications
    Applications
    • CornerStyle Chamfer DrillingCornerStyle Chamfer Drilling (756)
    • DrillingDrilling (756)
    • Stacked Plates DrillingStacked Plates Drilling (756)
    Cutting Diameter
    Cutting Diameter
    • 0.1181 in(5)
    • 0.12 in(4)
    • 0.122 in(4)
    • 0.125 in(7)
    • 0.126 in(5)
    • 0.1285 in(6)
    • 0.1299 in(5)
    • 0.1339 in(4)
    • 0.136 in(6)
    • 0.1378 in(6)
    • 0.1406 in(6)
    • 0.1417 in(5)
    • 0.144 in(2)
    • 0.1457 in(5)
    • 0.1496 in(5)
    • 0.1535 in(5)
    • 0.1563 in(6)
    • 0.1575 in(6)
    • 0.159 in(3)
    • 0.1594 in(1)
    • 0.1614 in(5)
    • 0.1654 in(6)
    • 0.166 in(2)
    • 0.1693 in(5)
    • 0.1719 in(3)
    • 0.1732 in(5)
    • 0.1772 in(7)
    • 0.1811 in(6)
    • 0.182 in(1)
    • 0.185 in(6)
    • 0.1875 in(7)
    • 0.189 in(6)
    • 0.191 in(2)
    • 0.1929 in(5)
    • 0.1969 in(7)
    • 0.1988 in(1)
    • 0.2008 in(7)
    • 0.201 in(6)
    • 0.2031 in(7)
    • 0.2047 in(6)
    • 0.2087 in(4)
    • 0.2126 in(4)
    • 0.213 in(6)
    • 0.2165 in(6)
    • 0.2188 in(7)
    • 0.2205 in(6)
    • 0.2244 in(3)
    • 0.228 in(4)
    • 0.2283 in(6)
    • 0.2323 in(5)
    • 0.2344 in(2)
    • 0.2362 in(7)
    • 0.2402 in(6)
    • 0.2441 in(5)
    • 0.248 in(4)
    • 0.25 in(7)
    • 0.252 in(4)
    • 0.2559 in(6)
    • 0.257 in(4)
    • 0.2598 in(6)
    • 0.2638 in(5)
    • 0.2656 in(7)
    • 0.2677 in(6)
    • 0.2717 in(5)
    • 0.272 in(1)
    • 0.2756 in(7)
    • 0.2795 in(5)
    • 0.2813 in(7)
    • 0.2835 in(5)
    • 0.2874 in(5)
    • 0.2913 in(6)
    • 0.2953 in(5)
    • 0.2969 in(4)
    • 0.2992 in(2)
    • 0.3031 in(2)
    • 0.3071 in(6)
    • 0.311 in(2)
    • 0.3125 in(7)
    • 0.315 in(7)
    • 0.3189 in(6)
    • 0.3228 in(5)
    • 0.3268 in(2)
    • 0.3281 in(5)
    • 0.3307 in(3)
    • 0.332 in(1)
    • 0.3346 in(7)
    • 0.3386 in(3)
    • 0.3425 in(5)
    • 0.3438 in(6)
    • 0.3465 in(6)
    • 0.3504 in(2)
    • 0.3543 in(7)
    • 0.3583 in(4)
    • 0.3594 in(6)
    • 0.3622 in(2)
    • 0.3661 in(3)
    • 0.368 in(3)
    • 0.3701 in(5)
    • 0.374 in(6)
    • 0.375 in(7)
    • 0.378 in(2)
    • 0.3819 in(2)
    • 0.3839 in(1)
    • 0.3858 in(6)
    • 0.3898 in(2)
    • 0.3906 in(4)
    • 0.3937 in(7)
    • 0.3976 in(2)
    • 0.4016 in(6)
    • 0.4055 in(6)
    • 0.4063 in(6)
    • 0.4094 in(3)
    • 0.4134 in(6)
    • 0.4173 in(2)
    • 0.4213 in(2)
    • 0.4219 in(7)
    • 0.4252 in(5)
    • 0.4331 in(6)
    • 0.437 in(2)
    • 0.4375 in(7)
    • 0.4409 in(2)
    • 0.4449 in(2)
    • 0.4488 in(2)
    • 0.4528 in(6)
    • 0.4531 in(6)
    • 0.4567 in(2)
    • 0.4606 in(2)
    • 0.4646 in(3)
    • 0.4685 in(2)
    • 0.4688 in(4)
    • 0.4724 in(6)
    • 0.4764 in(2)
    • 0.4803 in(2)
    • 0.4843 in(2)
    • 0.4844 in(3)
    • 0.4882 in(2)
    • 0.4921 in(5)
    • 0.4961 in(2)
    • 0.5 in(7)
    • 0.5039 in(2)
    • 0.5079 in(2)
    • 0.5118 in(6)
    • 0.5156 in(1)
    • 0.5157 in(2)
    • 0.5236 in(2)
    • 0.5313 in(1)
    • 0.5315 in(6)
    • 0.5394 in(2)
    • 0.5433 in(3)
    • 0.5512 in(7)
    • 0.5551 in(2)
    • 0.5591 in(2)
    • 0.5625 in(5)
    • 0.563 in(2)
    • 0.5709 in(5)
    • 0.5748 in(1)
    • 0.5787 in(2)
    • 0.5906 in(5)
    • 0.5945 in(2)
    • 0.6024 in(2)
    • 0.6102 in(5)
    • 0.6142 in(2)
    • 0.6181 in(2)
    • 0.622 in(2)
    • 0.625 in(7)
    • 0.6299 in(5)
    • 0.6339 in(1)
    • 0.6496 in(4)
    • 0.6563 in(2)
    • 0.6693 in(4)
    • 0.6875 in(2)
    • 0.689 in(5)
    • 0.6969 in(2)
    • 0.7087 in(5)
    • 0.7283 in(4)
    • 0.748 in(3)
    • 0.75 in(2)
    • 0.7677 in(2)
    • 0.7874 in(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 0.0 mm(1)
    • 3.0 mm(5)
    • 3.048 mm(4)
    • 3.1 mm(4)
    • 3.175 mm(7)
    • 3.2 mm(5)
    • 3.2639 mm(1)
    • 3.264 mm(5)
    • 3.3 mm(5)
    • 3.4 mm(4)
    • 3.4544 mm(1)
    • 3.455 mm(5)
    • 3.5 mm(5)
    • 3.5001 mm(1)
    • 3.571 mm(5)
    • 3.5712 mm(1)
    • 3.6 mm(5)
    • 3.658 mm(1)
    • 3.7 mm(5)
    • 3.8 mm(5)
    • 3.9 mm(5)
    • 3.97 mm(6)
    • 4.0 mm(6)
    • 4.0386 mm(1)
    • 4.039 mm(2)
    • 4.05 mm(1)
    • 4.1 mm(5)
    • 4.2 mm(6)
    • 4.217 mm(2)
    • 4.3 mm(5)
    • 4.3656 mm(2)
    • 4.3663 mm(1)
    • 4.3993 mm(1)
    • 4.4 mm(4)
    • 4.5 mm(6)
    • 4.5009 mm(1)
    • 4.5999 mm(1)
    • 4.6 mm(5)
    • 4.623 mm(1)
    • 4.7 mm(6)
    • 4.7625 mm(2)
    • 4.763 mm(5)
    • 4.8 mm(5)
    • 4.8006 mm(1)
    • 4.852 mm(2)
    • 4.9 mm(5)
    • 5.0 mm(7)
    • 5.05 mm(1)
    • 5.1 mm(6)
    • 5.1003 mm(1)
    • 5.1054 mm(1)
    • 5.106 mm(5)
    • 5.1587 mm(2)
    • 5.1594 mm(5)
    • 5.2 mm(6)
    • 5.3 mm(4)
    • 5.4 mm(4)
    • 5.41 mm(5)
    • 5.4102 mm(1)
    • 5.5 mm(6)
    • 5.5575 mm(2)
    • 5.558 mm(5)
    • 5.6 mm(6)
    • 5.7 mm(3)
    • 5.791 mm(4)
    • 5.8 mm(6)
    • 5.9 mm(5)
    • 5.954 mm(2)
    • 6.0 mm(7)
    • 6.1 mm(6)
    • 6.2 mm(5)
    • 6.3 mm(4)
    • 6.35 mm(7)
    • 6.4 mm(4)
    • 6.5 mm(6)
    • 6.5278 mm(2)
    • 6.528 mm(2)
    • 6.6 mm(6)
    • 6.7 mm(5)
    • 6.746 mm(5)
    • 6.7462 mm(2)
    • 6.8 mm(6)
    • 6.9 mm(5)
    • 6.9088 mm(1)
    • 7.0 mm(7)
    • 7.1 mm(5)
    • 7.145 mm(7)
    • 7.2 mm(5)
    • 7.3 mm(5)
    • 7.4 mm(6)
    • 7.5 mm(5)
    • 7.5406 mm(3)
    • 7.5413 mm(1)
    • 7.6 mm(2)
    • 7.7 mm(2)
    • 7.8 mm(6)
    • 7.9 mm(2)
    • 7.9375 mm(7)
    • 8.0 mm(7)
    • 8.1 mm(6)
    • 8.2 mm(5)
    • 8.3 mm(2)
    • 8.3344 mm(5)
    • 8.3998 mm(1)
    • 8.4 mm(2)
    • 8.4328 mm(1)
    • 8.4988 mm(1)
    • 8.5 mm(6)
    • 8.6 mm(3)
    • 8.7 mm(5)
    • 8.7325 mm(1)
    • 8.733 mm(5)
    • 8.8 mm(6)
    • 8.9 mm(2)
    • 9.0 mm(7)
    • 9.1 mm(4)
    • 9.1288 mm(2)
    • 9.129 mm(4)
    • 9.2 mm(2)
    • 9.3 mm(3)
    • 9.347 mm(2)
    • 9.3472 mm(1)
    • 9.4 mm(5)
    • 9.5 mm(6)
    • 9.525 mm(7)
    • 9.6 mm(2)
    • 9.7 mm(2)
    • 9.75 mm(1)
    • 9.8 mm(6)
    • 9.9 mm(2)
    • 9.921 mm(2)
    • 9.9212 mm(2)
    • 10.0 mm(7)
    • 10.1 mm(2)
    • 10.2 mm(6)
    • 10.3 mm(6)
    • 10.32 mm(6)
    • 10.4 mm(3)
    • 10.5 mm(6)
    • 10.6 mm(2)
    • 10.7 mm(2)
    • 10.7156 mm(5)
    • 10.7163 mm(2)
    • 10.8 mm(5)
    • 11.0 mm(6)
    • 11.1 mm(2)
    • 11.1125 mm(2)
    • 11.113 mm(5)
    • 11.2 mm(2)
    • 11.3 mm(2)
    • 11.4 mm(2)
    • 11.5 mm(6)
    • 11.5087 mm(2)
    • 11.5094 mm(4)
    • 11.6 mm(2)
    • 11.7 mm(2)
    • 11.8 mm(3)
    • 11.9 mm(2)
    • 11.9075 mm(2)
    • 11.908 mm(2)
    • 12.0 mm(6)
    • 12.1 mm(2)
    • 12.2 mm(2)
    • 12.3 mm(2)
    • 12.3038 mm(1)
    • 12.304 mm(2)
    • 12.4 mm(2)
    • 12.5 mm(5)
    • 12.6 mm(2)
    • 12.7 mm(7)
    • 12.8 mm(2)
    • 12.9 mm(2)
    • 13.0 mm(6)
    • 13.0962 mm(1)
    • 13.1 mm(2)
    • 13.3 mm(2)
    • 13.495 mm(1)
    • 13.5 mm(6)
    • 13.7 mm(2)
    • 13.8 mm(3)
    • 14.0 mm(7)
    • 14.1 mm(2)
    • 14.2 mm(2)
    • 14.2875 mm(2)
    • 14.288 mm(3)
    • 14.3 mm(2)
    • 14.5 mm(5)
    • 14.6 mm(1)
    • 14.7 mm(2)
    • 15.0 mm(5)
    • 15.1 mm(2)
    • 15.3 mm(2)
    • 15.5 mm(5)
    • 15.6 mm(2)
    • 15.7 mm(2)
    • 15.8 mm(2)
    • 15.875 mm(7)
    • 16.0 mm(5)
    • 16.1 mm(1)
    • 16.5 mm(4)
    • 16.67 mm(2)
    • 17.0 mm(4)
    • 17.463 mm(2)
    • 17.5 mm(5)
    • 17.7 mm(2)
    • 18.0 mm(5)
    • 18.5 mm(4)
    • 19.0 mm(3)
    • 19.05 mm(2)
    • 19.5 mm(2)
    • 20.0 mm(3)
    Cutting Diameter MinkomuCutting Diameter Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 14.0 mm(27)
    • 17.0 mm(27)
    • 17.4 mm(4)
    • 20.0 mm(40)
    • 21.4 mm(3)
    • 22.6 mm(2)
    • 23.0 mm(25)
    • 24.0 mm(24)
    • 25.9 mm(5)
    • 28.3 mm(5)
    • 28.6 mm(5)
    • 29.0 mm(51)
    • 33.0 mm(12)
    • 34.7 mm(2)
    • 34.9 mm(7)
    • 35.0 mm(85)
    • 38.1 mm(3)
    • 39.6 mm(4)
    • 40.0 mm(35)
    • 40.3 mm(6)
    • 41.0 mm(10)
    • 43.0 mm(80)
    • 45.0 mm(21)
    • 46.5 mm(1)
    • 48.0 mm(18)
    • 48.7 mm(9)
    • 49.0 mm(50)
    • 51.0 mm(10)
    • 53.1 mm(5)
    • 55.0 mm(8)
    • 55.6 mm(3)
    • 56.0 mm(43)
    • 57.0 mm(10)
    • 60.0 mm(30)
    • 63.0 mm(21)
    • 64.0 mm(9)
    • 64.5 mm(1)
    • 71.0 mm(10)
    • 73.0 mm(1)
    • 77.0 mm(6)
    • 80.0 mm(14)
    • 96.0 mm(10)
    • 112.0 mm(5)
    • 128.0 mm(5)
    • 144.0 mm(4)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Maximum Hole Depth [L4]
    Maximum Hole Depth [L4]
    • 0.5512 in(27)
    • 0.6693 in(27)
    • 0.685 in(4)
    • 0.7874 in(40)
    • 0.8425 in(3)
    • 0.8898 in(2)
    • 0.9055 in(25)
    • 0.9449 in(24)
    • 1.0197 in(5)
    • 1.1142 in(5)
    • 1.126 in(5)
    • 1.1417 in(51)
    • 1.2992 in(12)
    • 1.3661 in(2)
    • 1.374 in(7)
    • 1.378 in(85)
    • 1.5 in(3)
    • 1.5591 in(4)
    • 1.5748 in(35)
    • 1.5866 in(6)
    • 1.6142 in(10)
    • 1.6929 in(80)
    • 1.7717 in(21)
    • 1.8307 in(1)
    • 1.8898 in(18)
    • 1.9173 in(9)
    • 1.9291 in(50)
    • 2.0079 in(10)
    • 2.0906 in(5)
    • 2.1654 in(8)
    • 2.189 in(3)
    • 2.2047 in(43)
    • 2.2441 in(10)
    • 2.3622 in(30)
    • 2.4803 in(21)
    • 2.5197 in(9)
    • 2.5394 in(1)
    • 2.7953 in(10)
    • 2.874 in(1)
    • 3.0315 in(6)
    • 3.1496 in(14)
    • 3.7795 in(10)
    • 4.4094 in(5)
    • 5.0394 in(5)
    • 5.6693 in(4)
    Maximum Hole Depth [L4] MinkomuMaximum Hole Depth [L4] Max
    Reach
    Reach
    • 0.7874 in(27)
    • 0.9055 in(4)
    • 0.9449 in(27)
    • 1.063 in(3)
    • 1.1024 in(65)
    • 1.1417 in(2)
    • 1.3386 in(29)
    • 1.378 in(5)
    • 1.4173 in(29)
    • 1.4961 in(5)
    • 1.5748 in(12)
    • 1.6142 in(22)
    • 1.6929 in(7)
    • 1.7323 in(44)
    • 1.811 in(2)
    • 1.8504 in(41)
    • 1.9291 in(10)
    • 1.9685 in(6)
    • 2.0079 in(3)
    • 2.0866 in(57)
    • 2.126 in(4)
    • 2.1654 in(35)
    • 2.2047 in(18)
    • 2.3228 in(1)
    • 2.3622 in(31)
    • 2.4016 in(50)
    • 2.5197 in(1)
    • 2.5591 in(21)
    • 2.5984 in(5)
    • 2.6378 in(10)
    • 2.7559 in(3)
    • 2.7953 in(43)
    • 2.874 in(10)
    • 2.9134 in(9)
    • 2.9921 in(4)
    • 3.0315 in(26)
    • 3.1102 in(8)
    • 3.2283 in(1)
    • 3.2677 in(21)
    • 3.622 in(15)
    • 3.6614 in(10)
    • 3.9764 in(6)
    • 4.3307 in(10)
    • 5.0394 in(5)
    • 5.748 in(5)
    • 6.4173 in(4)
    Reach MinkomuReach Max
    Reach
    Reach
    • 20.0 mm(27)
    • 23.0 mm(4)
    • 24.0 mm(27)
    • 27.0 mm(3)
    • 28.0 mm(65)
    • 29.0 mm(2)
    • 34.0 mm(29)
    • 35.0 mm(5)
    • 36.0 mm(29)
    • 38.0 mm(5)
    • 40.0 mm(12)
    • 41.0 mm(22)
    • 43.0 mm(7)
    • 44.0 mm(44)
    • 46.0 mm(2)
    • 47.0 mm(41)
    • 49.0 mm(10)
    • 50.0 mm(6)
    • 51.0 mm(3)
    • 53.0 mm(57)
    • 54.0 mm(4)
    • 55.0 mm(35)
    • 56.0 mm(18)
    • 59.0 mm(1)
    • 60.0 mm(31)
    • 61.0 mm(50)
    • 64.0 mm(1)
    • 65.0 mm(21)
    • 66.0 mm(5)
    • 67.0 mm(10)
    • 70.0 mm(3)
    • 71.0 mm(43)
    • 73.0 mm(10)
    • 74.0 mm(9)
    • 76.0 mm(4)
    • 77.0 mm(26)
    • 79.0 mm(8)
    • 82.0 mm(1)
    • 83.0 mm(21)
    • 92.0 mm(15)
    • 93.0 mm(10)
    • 101.0 mm(6)
    • 110.0 mm(10)
    • 128.0 mm(5)
    • 146.0 mm(5)
    • 163.0 mm(4)
    Reach MinkomuReach Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (711)
    • Whistle Notch 2 CylindricalEnd (45)
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.4409 in(27)
    • 2.4803 in(4)
    • 2.5984 in(95)
    • 2.6772 in(2)
    • 2.874 in(5)
    • 2.9134 in(34)
    • 3.0709 in(12)
    • 3.1102 in(51)
    • 3.2283 in(51)
    • 3.4252 in(10)
    • 3.5039 in(43)
    • 3.5827 in(63)
    • 3.7008 in(18)
    • 3.7795 in(3)
    • 4.0157 in(39)
    • 4.0551 in(59)
    • 4.1339 in(10)
    • 4.2126 in(23)
    • 4.3701 in(5)
    • 4.4488 in(9)
    • 4.5276 in(22)
    • 4.6457 in(46)
    • 4.8425 in(10)
    • 4.8819 in(30)
    • 5.1575 in(8)
    • 5.2362 in(22)
    • 5.315 in(14)
    • 5.6299 in(11)
    • 6.0236 in(6)
    • 6.2205 in(10)
    • 6.9291 in(5)
    • 7.7559 in(5)
    • 8.4252 in(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 62.0 mm(27)
    • 63.0 mm(4)
    • 66.0 mm(95)
    • 68.0 mm(2)
    • 73.0 mm(5)
    • 74.0 mm(34)
    • 78.0 mm(12)
    • 79.0 mm(51)
    • 82.0 mm(51)
    • 87.0 mm(10)
    • 89.0 mm(43)
    • 91.0 mm(63)
    • 94.0 mm(18)
    • 96.0 mm(3)
    • 102.0 mm(39)
    • 103.0 mm(59)
    • 105.0 mm(10)
    • 107.0 mm(23)
    • 111.0 mm(5)
    • 113.0 mm(9)
    • 115.0 mm(22)
    • 118.0 mm(46)
    • 123.0 mm(10)
    • 124.0 mm(30)
    • 131.0 mm(8)
    • 133.0 mm(22)
    • 135.0 mm(14)
    • 143.0 mm(11)
    • 153.0 mm(6)
    • 158.0 mm(10)
    • 176.0 mm(5)
    • 197.0 mm(5)
    • 214.0 mm(4)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Coating
    Coating
    • TiN/AlTiN (752)
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KCP15B (755)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 4.7625 mm(14)
    • 6.0 mm(232)
    • 6.35 mm(12)
    • 7.9375 mm(11)
    • 8.0 mm(122)
    • 9.525 mm(11)
    • 10.0 mm(105)
    • 11.1125 mm(8)
    • 12.0 mm(88)
    • 12.7 mm(7)
    • 14.0 mm(53)
    • 14.2875 mm(5)
    • 15.875 mm(2)
    • 16.0 mm(47)
    • 17.4625 mm(1)
    • 18.0 mm(24)
    • 20.0 mm(14)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.1875 in(14)
    • 0.2362 in(232)
    • 0.25 in(12)
    • 0.3125 in(11)
    • 0.315 in(122)
    • 0.375 in(11)
    • 0.3937 in(105)
    • 0.4375 in(8)
    • 0.4724 in(88)
    • 0.5 in(7)
    • 0.5512 in(53)
    • 0.5625 in(5)
    • 0.625 in(2)
    • 0.6299 in(47)
    • 0.6875 in(1)
    • 0.7087 in(24)
    • 0.7874 in(14)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    HPX Drills • High-Volume Steel Production
    HPX • K224 • 3 x D • Vnitřní chlazení • Stopka HA
    (27)

    HPX • K224 • 3 x D • Vnitřní chlazení • Stopka HA

    HPX • B225 • 5 x D • Vnitřní chlazení • Stopka HA
    (169)

    HPX • B225 • 5 x D • Vnitřní chlazení • Stopka HA

    HPX • B224 • 3 x D • Vnitřní chlazení • Stopka HA
    (109)

    HPX • B224 • 3 x D • Vnitřní chlazení • Stopka HA

    HPX • B221 • 3 x D • Vnější chlazení • Stopka HA
    (168)

    HPX • B221 • 3 x D • Vnější chlazení • Stopka HA

    HPX • B226 • 8 x D • Vnitřní chlazení • Stopka HA
    (97)

    HPX • B226 • 8 x D • Vnitřní chlazení • Stopka HA

    HPX • B222 • 5 x D • Vnější chlazení • Stopka HA
    (97)

    HPX • B222 • 5 x D • Vnější chlazení • Stopka HA

    HPX • K225 • 5 x D • Vnitřní chlazení • Stopka HA
    (44)

    HPX • K225 • 5 x D • Vnitřní chlazení • Stopka HA

    KenDrill™ HPX • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric
    (45)

    KenDrill™ HPX • 5 x D • Internal Coolant • Whistle Notch™ Shank • Metric

    Have Questions For Us?

    Our skilled staff is ready to help.

    Požádat o informace
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    Zadejte platný název
    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku
    Zobrazit košík

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk