Těla SEFAS

Vybrat filtry
Filtry
    Zobrazit filtry v
    Metrické
    Palcové
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (27)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(27)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(27)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(27)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(3)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(27)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(27)
    • M Stainless Steel (27)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(27)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(27)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(27)
    • K Cast Iron (27)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(27)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(27)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(27)
    • N Non-Ferrous Materials (27)
      • N5
        Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (27)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(27)
      • N7
        MMC's (27)
      • N4
        Copper, Brass, Zinc-based on machinability index range of 70-100 (27)
      • N1
        Wrought Aluminum (27)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(27)
      • N6
        Carbon, Graphite Composites, CFRP (27)
    • S High-Temp Alloys (27)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(27)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(27)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(27)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(27)
    • H Hardened Materials (27)
      • H3
        Hardened Materials 56-60 HRC(27)
      • H1
        Hardened Materials 44-48 HRC(27)
      • H4
        Hardened Materials >60 HRC(27)
      • H2
        Hardened Materials 48-55 HRC(27)
    • C CFRP Materials (3)
      • C1
        CFRP, CFRP / CFRP (3)
      • C2
        CFRP / Aluminium CFRP / Non-Ferrous (3)
      • C4
        CFRP / Stainless Steel (3)
      • C3
        CFRP / Titanium CFRP / High Temp (3)
    Applications
    Applications
    • CountersinkingCountersinking (27)
    • DrillingDrilling (27)
    Cutting Diameter
    Cutting Diameter
    • 0.1563 in(1)
    • 0.1575 in(2)
    • 0.1875 in(1)
    • 0.236 in(2)
    • 0.25 in(1)
    • 0.313 in(1)
    • 0.315 in(2)
    • 0.375 in(1)
    • 0.394 in(2)
    • 0.438 in(1)
    • 0.472 in(2)
    • 0.5 in(1)
    • 0.551 in(2)
    • 0.563 in(1)
    • 0.63 in(2)
    • 0.688 in(1)
    • 0.709 in(1)
    • 0.75 in(1)
    • 0.813 in(1)
    • 0.938 in(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 3.9688 mm(1)
    • 4.0 mm(2)
    • 4.7625 mm(1)
    • 6.0 mm(2)
    • 6.35 mm(1)
    • 7.95 mm(1)
    • 8.0 mm(2)
    • 9.525 mm(1)
    • 10.0 mm(2)
    • 11.125 mm(1)
    • 12.0 mm(2)
    • 12.7 mm(1)
    • 14.0 mm(2)
    • 14.3 mm(1)
    • 16.0 mm(2)
    • 17.475 mm(1)
    • 18.0 mm(1)
    • 19.05 mm(1)
    • 20.65 mm(1)
    • 23.825 mm(1)
    Cutting Diameter MinkomuCutting Diameter Max
    Connection Style
    Connection Style
    • Straight-Cylindrical (20)
    • Whistle Notch 2 (7)
    Over All Length [L]
    Over All Length [L]
    • 4.016 in(1)
    • 4.06 in(2)
    • 4.13 in(1)
    • 4.252 in(1)
    • 4.31 in(1)
    • 4.3125 in(1)
    • 4.63 in(1)
    • 4.803 in(1)
    • 5.236 in(1)
    • 5.394 in(1)
    • 5.551 in(1)
    • 5.63 in(1)
    • 5.669 in(1)
    • 5.75 in(1)
    • 5.88 in(1)
    • 6.06 in(1)
    • 6.13 in(1)
    • 6.31 in(1)
    • 6.44 in(2)
    • 6.56 in(2)
    • 6.625 in(1)
    • 6.6875 in(1)
    • 7.25 in(1)
    • 7.5 in(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 102.0 mm(1)
    • 103.12 mm(1)
    • 103.124 mm(1)
    • 104.902 mm(1)
    • 108.0 mm(1)
    • 109.474 mm(1)
    • 109.538 mm(1)
    • 117.6 mm(1)
    • 122.0 mm(1)
    • 133.0 mm(1)
    • 137.0 mm(1)
    • 141.0 mm(1)
    • 143.0 mm(1)
    • 144.0 mm(1)
    • 146.05 mm(1)
    • 149.352 mm(1)
    • 153.924 mm(1)
    • 155.7 mm(1)
    • 160.27 mm(1)
    • 163.576 mm(1)
    • 163.58 mm(1)
    • 166.37 mm(1)
    • 166.624 mm(1)
    • 168.275 mm(1)
    • 169.99 mm(1)
    • 184.15 mm(1)
    • 190.5 mm(1)
    Over All Length [L] MinkomuOver All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • CS5 (27)
    • KC7015 (27)
    • KC7215 (27)
    • KC7315 (27)
    • KC7325 (3)
    • KC7410 (3)
    • KCC10 (3)
    • KCMS15 (3)
    • KCP15 (3)
    • KCP15A (3)
    • KCPM45 (2)
    • KMF (27)
    • KN15 (3)
    Countersunk Angle
    Countersunk Angle
    • 41.0 (27)
    • 45.0 (27)
    Countersunk Angle MinkomuCountersunk Angle Max
    frontEnd
    Insert Shape
    Insert Shape
    • COUNTERBORE/COUNTERSINK MISC (27)
    • KENTIP DRILL (3)
    • KENTIP FUSION DRILL (3)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 19.05 mm(6)
    • 20.0 mm(3)
    • 25.4 mm(4)
    • 31.75 mm(8)
    • 32.0 mm(4)
    • 38.1 mm(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.75 in(6)
    • 0.7874 in(3)
    • 1.0 in(4)
    • 1.25 in(8)
    • 1.2598 in(4)
    • 1.5 in(2)
    Back-End Diameter MinkomuBack-End Diameter Max
    No filters matching ""
    Chystáte se přidat na stránku Moje řešení. Chcete pokračovat?
    Select the destination where you want to move komu.
    Nové Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    Katalogové číslo ISO

    Katalogové číslo ANSI

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    Product data

    Abyste viděli informace ve svém panelu, musíte být přihlášeni.
    Session expired due to inactivity, please login again
    Produkty (), které jste se pokoušeli přidat do košíku, nejsou k dispozici, prosím kontaktujte službu pro zákazníky
    položek bylo úspěšně přidáno do košíku

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number Katalogové číslo ISO Karbid  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)