KM™
Filter
Filter
Filter anzeigen in
MetricInch
Werkstoff des Werkstücks
Werkstoff des Werkstücks
- P Stahl (603)
- P5Ferritische, martensitische und Rostfreie PH-Stähle <330 HB; <35 HRC; 600-900 N/mm^2 UTS(603)
- P0Kohlenstoffarme Stähle, langspanend C < .25%; <125 HB; <530 N/mm^2 UTS(603)
- P1Kohlenstoffarme Stähle, kurzspanend C < .25%; <125 HB; <530 N/mm^2 UTS(603)
- P6Hochfeste ferritische, martensitische und PH-Edelstähle 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(603)
- P4Legierter Stahl/Werkzeugstahl C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(603)
- P3Legierter Stahl/Werkzeugstahl C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(603)
- P2Stähle mit mittlerem und hohem Kohlenstoffgehalt C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(603)
- M Rostfreier Stahl (592)
- M2Hochfeste austenitische, rostfreie Stähle und Edelstahlguss 150-230 HB; <25 HRC; >600 N/mm^2 UTS(592)
- M1Austenitischer, Rostfreier Stahl 130-200 HB; <600 N/mm^2 UTS(592)
- M3Duplex-Edelstahl 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(592)
- K Gusseisen (622)
- K2GGV- und Sphäroguss mit niedriger bis mittlerer Festigkeit 130-260 HB; <28 HRC; <600 N/mm^2 UTS(622)
- K1Grauguss 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(622)
- K3Hochfestes und zwischenstufenvergütetes duktiles Gusseisen 180-350 HB; <43 HRC; >600 N/mm^2 UTS(622)
- N Buntmetalle (584)
- N3Aluminiumlegierungen mit hohem Siliziumgehalt Si >12,2%(411)
- N6Kohlefaser- und Graphit-Verbundwerkstoffe, CFRP (581)
- N2Aluminiumlegierungen mit geringem Siliziumgehalt und Magnesiumlegierungen Si <12,2 %(581)
- N5Nylon, Kunststoffe, Gummi, Phenole und Glasfaser (581)
- N7MMCs (487)
- N4Kupfer-, Messing- und Zink-Basis mit einem Zerspanbarkeitsindex von 70 bis 100 (584)
- N1Geschmiedetes Aluminium (581)
- S Hochwarmfeste Legierungen (606)
- S3Warmfeste Legierungen auf Nickelbasis 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(604)
- S2Warmfeste Legierungen auf Kobaltbasis 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(606)
- S1Warmfeste Legierungen auf Eisenbasis 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(604)
- S4Titan und Titanlegierungen 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(590)
- H Gehärtete Werkstoffe (488)
- H3Gehärtete Werkstoffe 56-60 HRC(465)
- H1Gehärtete Werkstoffe 44-48 HRC(488)
- H4Gehärtete Werkstoffe >60 HRC(441)
- H2Gehärtete Werkstoffe 48-55 HRC(488)
- C Verbundwerkstoffe (CFRP) (446)
- C1CFRP, CFRP / CFRP (446)
- C2CFRP / Aluminium CFRP / Nichteisen (389)
Anwendungen
Anwendungen
Chamfer Turning (25)
Cut-Off (54)
Deep Grooving (26)
Face Grooving (26)
Facing (272)
Grooving (121)
ID Facing (6)
ID Grooving (24)
ID Thread Turning (33)
Multiple Direction Cutting (380)
OD Thread Turning (60)
Plunge Turning (31)
Profiling (360)
TRN Boring (216)
Turning (394)
Dreh-Durchmesser
Dreh-Durchmesser
- 0.625 in(1)
- 0.75 in(1)
- 0.8125 in(1)
- 0.875 in(1)
- 0.9375 in(1)
- 1.375 in(1)
- 1.625 in(1)
- 1.75 in(1)
- 2.0 in(1)
bis
Dreh-Durchmesser
Dreh-Durchmesser
- 15.875 mm(1)
- 19.05 mm(1)
- 20.638 mm(1)
- 22.225 mm(1)
- 23.812 mm(1)
- 34.925 mm(1)
- 41.275 mm(1)
- 44.45 mm(1)
- 50.8 mm(1)
bis
Schnittbedingungen des Werkstoffs
Schnittbedingungen des Werkstoffs
- H-All (482)
- K-All (564)
- K1 (79)
- M-All (558)
- N-All (518)
- P-All (575)
- S-All (557)
- S2 (211)
- S4 (136)
Gewindeart
Gewindeart
- 55 (18)
- 60 (75)
- ACME (41)
- API (32)
- API BUTTRESS (1)
- API RD (35)
- BSPT (10)
- BSW (39)
- BUTTRESS (56)
- M (29)
- NPT (36)
- NPTF (10)
- RD DIN 405 (12)
- STUB ACME (33)
- TR DIN 103 (16)
- UN (73)
- UNJ (36)
Schnittbedingung
Schnittbedingung
- Heavily Interrupted Cut (577)
- Lightly Interrupted Cut (592)
- Smooth Cut (592)
Maximale Lochtiefe [L4]
Maximale Lochtiefe [L4]
- 47.625 mm(1)
- 57.15 mm(1)
- 61.912 mm(1)
- 66.675 mm(1)
- 71.438 mm(1)
- 104.775 mm(1)
- 123.825 mm(1)
- 133.35 mm(1)
- 152.4 mm(1)
bis
Maximale Lochtiefe [L4]
Maximale Lochtiefe [L4]
- 1.875 in(1)
- 2.25 in(1)
- 2.4375 in(1)
- 2.625 in(1)
- 2.8125 in(1)
- 4.125 in(1)
- 4.875 in(1)
- 5.25 in(1)
- 6.0 in(1)
bis
Reach
Reach
- 2.5197 in(1)
- 2.9921 in(1)
- 3.189 in(1)
- 3.3858 in(1)
- 3.5433 in(1)
- 5.0787 in(1)
- 6.2205 in(1)
- 6.5748 in(1)
- 7.5197 in(1)
bis
Reach
Reach
- 64.0 mm(1)
- 76.0 mm(1)
- 81.0 mm(1)
- 86.0 mm(1)
- 90.0 mm(1)
- 129.0 mm(1)
- 158.0 mm(1)
- 167.0 mm(1)
- 191.0 mm(1)
bis
ISO-Einstellwinkel [KRI]
ISO-Einstellwinkel [KRI]
- 45.0 (19)
- 48.0 (6)
- 49.783 (1)
- 50.0 (2)
- 61.0 (2)
- 62.5 (13)
- 72.5 (1)
- 75.0 (48)
- 85.0 (4)
- 90.0 (214)
- 93.0 (175)
- 95.0 (128)
- 107.5 (26)
bis
Anschlussart
Anschlussart
- Cutoff Support Blade A1-A3 (3)
- KM (519)
Anzahl der Spannuten
Anzahl der Spannuten
- 2 (9)
Schneidkanten pro Wendeschneidplatte
Schneidkanten pro Wendeschneidplatte
- 0.0 (342)
- 1.0 (410)
- 2.0 (404)
- 3.0 (117)
- 4.0 (275)
- 6.0 (56)
- 8.0 (107)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 0.5906 in(6)
- 0.591 in(1)
- 0.787 in(34)
- 0.7874 in(50)
- 0.7973 in(1)
- 0.9843 in(49)
- 0.992 in(2)
- 1.181 in(14)
- 1.1811 in(139)
- 1.378 in(47)
- 1.5748 in(17)
- 1.575 in(15)
- 1.7717 in(12)
- 1.772 in(13)
- 1.85 in(2)
- 1.9685 in(18)
- 1.969 in(25)
- 2.165 in(1)
- 2.362 in(28)
- 2.3622 in(29)
- 2.7559 in(33)
- 2.756 in(30)
- 3.1496 in(17)
- 3.516 in(1)
- 3.5433 in(17)
- 3.819 in(2)
- 3.937 in(12)
- 3.94 in(2)
- 4.0 in(7)
- 4.3307 in(11)
- 4.528 in(9)
- 4.7244 in(1)
- 4.819 in(2)
- 4.9068 in(1)
- 4.9213 in(4)
- 5.2818 in(1)
- 5.4693 in(1)
- 5.5118 in(8)
- 5.6568 in(1)
- 5.8433 in(1)
- 7.3698 in(1)
- 8.4959 in(1)
- 8.8709 in(1)
- 9.8179 in(1)
- 30.0 in(1)
bis
Gesamtlänge [L]
Gesamtlänge [L]
- 1.181 mm(1)
- 15.0 mm(7)
- 20.0 mm(84)
- 20.252 mm(1)
- 25.0 mm(49)
- 25.198 mm(2)
- 30.0 mm(153)
- 35.0 mm(47)
- 40.0 mm(32)
- 45.0 mm(25)
- 47.0 mm(2)
- 50.0 mm(43)
- 55.0 mm(1)
- 60.0 mm(57)
- 70.0 mm(63)
- 80.0 mm(17)
- 89.31 mm(1)
- 90.0 mm(17)
- 97.0 mm(2)
- 100.0 mm(14)
- 101.6 mm(7)
- 110.0 mm(11)
- 115.0 mm(9)
- 120.0 mm(1)
- 122.4 mm(2)
- 124.634 mm(1)
- 125.0 mm(4)
- 134.159 mm(1)
- 138.921 mm(1)
- 140.0 mm(8)
- 143.684 mm(1)
- 148.421 mm(1)
- 187.194 mm(1)
- 215.795 mm(1)
- 225.32 mm(1)
- 249.374 mm(1)
bis
Eckenradius
Eckenradius
- 0.0 in(73)
- 0.001 in(72)
- 0.002 in(108)
- 0.003 in(104)
- 0.004 in(345)
- 0.005 in(24)
- 0.006 in(52)
- 0.007 in(43)
- 0.008 in(438)
- 0.009 in(22)
- 0.01 in(49)
- 0.011 in(21)
- 0.012 in(28)
- 0.013 in(31)
- 0.014 in(56)
- 0.016 in(462)
- 0.017 in(1)
- 0.018 in(26)
- 0.019 in(10)
- 0.02 in(50)
- 0.021 in(2)
- 0.023 in(31)
- 0.024 in(20)
- 0.028 in(3)
- 0.03 in(31)
- 0.031 in(512)
- 0.035 in(31)
- -0.039 in(342)
- 0.039 in(61)
- 0.041 in(12)
- 0.047 in(428)
- 0.049 in(46)
- 0.059 in(59)
- 0.06 in(9)
- 0.061 in(4)
- 0.062 in(21)
- 0.063 in(307)
- 0.065 in(4)
- 0.069 in(46)
- 0.078 in(21)
- 0.079 in(30)
- 0.08 in(4)
- 0.089 in(21)
- 0.094 in(85)
- 0.098 in(12)
- 0.099 in(2)
- 0.125 in(26)
- 0.126 in(19)
- 0.157 in(7)
- 0.188 in(2)
- 0.197 in(1)
- 0.25 in(1)
- 0.394 in(3)
- 0.492 in(5)
- 0.63 in(4)
bis
Eckenradius
Eckenradius
- 0.0 mm(73)
- 0.025 mm(72)
- 0.05 mm(108)
- 0.075 mm(104)
- 0.1 mm(345)
- 0.125 mm(24)
- 0.15 mm(52)
- 0.175 mm(43)
- 0.2 mm(438)
- 0.225 mm(22)
- 0.25 mm(49)
- 0.275 mm(21)
- 0.3 mm(28)
- 0.325 mm(31)
- 0.35 mm(56)
- 0.4 mm(462)
- 0.425 mm(1)
- 0.45 mm(26)
- 0.475 mm(10)
- 0.5 mm(50)
- 0.525 mm(2)
- 0.575 mm(31)
- 0.6 mm(20)
- 0.7 mm(3)
- 0.75 mm(31)
- 0.775 mm(46)
- 0.8 mm(466)
- 0.9 mm(31)
- -1.0 mm(342)
- 1.0 mm(61)
- 1.05 mm(12)
- 1.2 mm(428)
- 1.25 mm(46)
- 1.5 mm(59)
- 1.525 mm(9)
- 1.55 mm(4)
- 1.575 mm(21)
- 1.6 mm(307)
- 1.65 mm(4)
- 1.75 mm(46)
- 1.975 mm(21)
- 2.0 mm(30)
- 2.025 mm(4)
- 2.25 mm(21)
- 2.375 mm(17)
- 2.4 mm(81)
- 2.5 mm(12)
- 2.525 mm(2)
- 3.175 mm(26)
- 3.2 mm(19)
- 4.0 mm(7)
- 4.775 mm(2)
- 5.0 mm(1)
- 6.35 mm(1)
- 10.0 mm(3)
- 12.5 mm(5)
- 16.0 mm(4)
bis
application
Minimale Schnitttiefe
Minimale Schnitttiefe
Minimaler Vorschub
Minimaler Vorschub
Schneidstoffsorte
Schneidstoffsorte
- CG5 (36)
- CG6 (12)
- CM1 (12)
- CS5 (9)
- CW2015 (148)
- CW3020 (5)
- CW5025 (103)
- HCK10 (2)
- HWK10 (4)
- K00326 (11)
- K060 (38)
- K090 (28)
- K1 (7)
- K313 (451)
- K420 (56)
- K6 (5)
- K68 (328)
- K8735 (11)
- KB1340 (82)
- KB1345 (155)
- KB1610 (204)
- KB1630 (187)
- KB5610 (162)
- KB5630 (177)
- KB9640 (5)
- KBH10 (250)
- KBH10B (121)
- KBH20 (343)
- KBH20B (121)
- KBK35 (31)
- KBK45 (5)
- KC5010 (549)
- KC5020P (16)
- KC5025 (541)
- KC5410 (398)
- KC7140 (9)
- KC720 (72)
- KC7215 (9)
- KC7225 (9)
- KC730 (428)
- KC7815 (9)
- KC7820 (4)
- KC7845 (5)
- KC7935 (9)
- KC810 (8)
- KC850 (467)
- KC9110 (5)
- KC9125 (10)
- KC990 (9)
- KCK05 (349)
- KCK05B (148)
- KCK15 (339)
- KCK15B (367)
- KCK20 (434)
- KCK20B (425)
- KCM15 (359)
- KCM15B (337)
- KCM25 (422)
- KCM25B (391)
- KCM25S (53)
- KCM35 (305)
- KCM35B (162)
- KCMS35 (7)
- KCP05 (297)
- KCP05B (232)
- KCP10 (455)
- KCP10B (493)
- KCP15 (12)
- KCP20S (53)
- KCP25 (468)
- KCP25B (518)
- KCP25C (535)
- KCP30 (356)
- KCP30B (169)
- KCP40 (192)
- KCP40B (225)
- KCPK05 (220)
- KCPK10 (9)
- KCS10 (224)
- KCS10B (392)
- KCS25S (53)
- KCU10 (532)
- KCU10B (540)
- KCU25 (535)
- KCU25B (543)
- KCU40 (9)
- KD1400 (266)
- KD1405 (151)
- KD1425 (319)
- KMF (12)
- KMS (9)
- KN10S (69)
- KS15 (49)
- KT315 (443)
- KT325 (134)
- KTP10 (323)
- KTP25S (244)
- KU40D (9)
- KY1540 (47)
- KY1615 (34)
- KY3500 (220)
- KY4300 (82)
- KY4400 (190)
- KYHK15B (211)
- KYK10 (108)
- KYK25 (136)
- KYS25 (67)
- KYS30 (122)
- PB100 (34)
- PB250 (2)
- PN120 (6)
- SP4019 (72)
- THM (226)
- THM-X (118)
- THMF-X (62)
- TN10P (243)
- TN10U (212)
- TN15M (183)
- TN15U (131)
- TN2000 (192)
- TN20K (234)
- TN20P (294)
- TN30M (203)
- TN30P (130)
- TN4000 (160)
- TN6010 (157)
- TN6025 (124)
- TTM09 (7)
- TTR (18)
- TTR-X (7)
- TTS (71)
- W00160 (7)
- W00162 (12)
- WBH10P (137)
- WBH10U (71)
- WBH20P (204)
- WBH30P (178)
- WBK40U (15)
- WBK45U (24)
- WDN00U (110)
- WDN25U (212)
- WK05CT (224)
- WK15CT (184)
- WK20CT (327)
- WM15CT (264)
- WM25CT (319)
- WM35CT (174)
- WP05CT (52)
- WP15CT (339)
- WP20TT (38)
- WP25CT (339)
- WP35CT (219)
- WS10PT (262)
- WS25PT (266)
- WU05PT (65)
- WU10HT (275)
- WU10PT (262)
- WU25PT (242)
- WU35PT (8)
- X00580 (38)
- X00581 (38)
- X00582 (38)
- X00583 (38)
- X00584 (38)
- X00585 (38)
- X00586 (38)
- X00591 (38)
- X00592 (38)
- X00593 (38)
- X00594 (38)
- X00596 (38)
- X00597 (38)
- X00599 (38)
Schneidrichtung
Schneidrichtung
- L (237)
- N (24)
- N - Neutral (3)
- R (258)
Drill Type
Drill Type
- 86-01 Indexable Drill (9)
Schlicht-Wendeschneidplatte
Schlicht-Wendeschneidplatte
- N (613)
- Y (216)
Bohrbedingungen des Werkstoffs
Bohrbedingungen des Werkstoffs
- K1 (9)
- K2 (9)
- K3 (9)
- M1 (9)
- M2 (9)
- M3 (9)
- N1 (9)
- N2 (9)
- N3 (9)
- N4 (9)
- N5 (9)
- N6 (9)
- N7 (9)
- P0 (9)
- P1 (9)
- P2 (9)
- P3 (9)
- P4 (9)
- P5 (9)
- P6 (9)
- S1 (9)
- S2 (9)
- S3 (9)
- S4 (9)
F Abmessung
F Abmessung
- 0.0 mm(21)
- 1.7 mm(1)
- 2.0 mm(2)
- 7.0 mm(9)
- 7.35 mm(3)
- 8.0 mm(45)
- 8.05 mm(2)
- 8.5 mm(2)
- 9.0 mm(14)
- 10.0 mm(76)
- 11.0 mm(18)
- 12.5 mm(36)
- 13.0 mm(20)
- 16.0 mm(38)
- 17.0 mm(28)
- 22.0 mm(65)
- 24.0 mm(6)
- 25.3 mm(1)
- 27.0 mm(41)
- 28.5 mm(2)
- 30.0 mm(4)
- 35.0 mm(7)
- 38.0 mm(6)
- 43.0 mm(16)
- 48.0 mm(8)
- 53.0 mm(27)
bis
F Abmessung
F Abmessung
- 0.0 in(21)
- 0.0669 in(1)
- 0.0787 in(2)
- 0.2756 in(9)
- 0.289 in(3)
- 0.315 in(45)
- 0.3169 in(2)
- 0.3346 in(2)
- 0.354 in(4)
- 0.3543 in(10)
- 0.3937 in(55)
- 0.394 in(21)
- 0.4331 in(18)
- 0.4921 in(36)
- 0.5118 in(20)
- 0.6299 in(37)
- 0.63 in(1)
- 0.669 in(3)
- 0.6693 in(25)
- 0.866 in(11)
- 0.8661 in(54)
- 0.9449 in(5)
- 0.945 in(1)
- 0.9961 in(1)
- 1.063 in(41)
- 1.122 in(2)
- 1.1811 in(4)
- 1.378 in(7)
- 1.4961 in(6)
- 1.6929 in(12)
- 1.693 in(4)
- 1.8898 in(8)
- 2.0866 in(21)
- 2.087 in(6)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 mm(36)
- -1.0 mm(216)
- 13.0 mm(9)
- 16.0 mm(14)
- 18.5 mm(1)
- 20.0 mm(17)
- 25.0 mm(25)
- 32.0 mm(29)
- 40.0 mm(28)
- 41.3 mm(13)
- 44.0 mm(17)
- 47.6 mm(13)
- 50.0 mm(22)
- 54.0 mm(13)
- 56.625 mm(18)
- 57.2 mm(5)
- 63.0 mm(2)
- 70.0 mm(9)
- 74.0 mm(2)
- 80.0 mm(14)
- 86.0 mm(17)
- 88.9 mm(31)
- 100.0 mm(11)
- 106.0 mm(23)
- 120.0 mm(1)
- 139.7 mm(13)
- 174.6 mm(13)
- 209.6 mm(5)
- 222.3 mm(5)
bis
Minimaler Durchmesser der Axialnutenbearbeitung
Minimaler Durchmesser der Axialnutenbearbeitung
- 0.0 in(36)
- 0.5118 in(9)
- 0.6299 in(10)
- 0.63 in(4)
- 0.7283 in(1)
- 0.7874 in(17)
- 0.9843 in(25)
- -1.0 in(216)
- 1.2598 in(26)
- 1.26 in(3)
- 1.5748 in(24)
- 1.575 in(4)
- 1.626 in(13)
- 1.732 in(16)
- 1.7323 in(1)
- 1.874 in(13)
- 1.9685 in(8)
- 1.969 in(14)
- 2.126 in(13)
- 2.229 in(18)
- 2.252 in(5)
- 2.48 in(2)
- 2.756 in(9)
- 2.913 in(2)
- 3.15 in(14)
- 3.386 in(17)
- 3.5 in(31)
- 3.937 in(11)
- 4.173 in(23)
- 4.7244 in(1)
- 5.5 in(13)
- 6.874 in(13)
- 8.252 in(5)
- 8.752 in(5)
- 27.0 in(1)
- 28.0 in(3)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -1.0 in(342)
- 1.0236 in(2)
- 1.063 in(2)
- 1.2598 in(10)
- 393.661 in(56)
bis
Maximaler Durchmesser der Axialnutenbearbeitung
Maximaler Durchmesser der Axialnutenbearbeitung
- -1.0 mm(342)
- 26.0 mm(2)
- 27.0 mm(2)
- 32.0 mm(10)
- 9999.0 mm(56)
bis
Schneidrichtung
Schneidrichtung
- B (88)
- E (158)
- P (2)
- S (264)
Spanwinkelausführung
Spanwinkelausführung
- DOUBLE NEGATIVE (188)
- DOUBLE POSITIVE (3)
- NEGATIVE-ZERO (37)
- NEUTRAL (ZERO) (228)
- POSITIVE-ZERO (33)
Bohrungstiefe min.
Bohrungstiefe min.
- 1.378 in(29)
- 1.3843 in(2)
- 1.3854 in(2)
- 1.575 in(14)
- 1.6535 in(1)
- 1.654 in(1)
- 1.6618 in(4)
- 1.664 in(2)
- 1.701 in(2)
- 1.772 in(10)
- 1.968 in(2)
- 1.969 in(20)
- 2.165 in(1)
- 2.1689 in(4)
- 2.2047 in(2)
- 2.209 in(2)
- 2.2091 in(4)
- 2.2835 in(4)
- 2.362 in(27)
- 2.3622 in(5)
- 2.756 in(23)
- 2.7567 in(6)
- 2.7602 in(2)
- 2.9528 in(2)
- 2.953 in(1)
- 2.954 in(1)
- 2.9543 in(1)
- 3.132 in(1)
- 3.1496 in(4)
- 3.15 in(7)
- 3.151 in(2)
- 3.4343 in(2)
- 3.445 in(4)
- 3.937 in(6)
- 4.528 in(9)
- 4.7244 in(2)
bis
Bohrungstiefe min.
Bohrungstiefe min.
- 35.0 mm(29)
- 35.16 mm(2)
- 35.19 mm(2)
- 40.0 mm(14)
- 42.0 mm(2)
- 42.21 mm(4)
- 42.27 mm(2)
- 43.21 mm(2)
- 45.0 mm(10)
- 50.0 mm(22)
- 55.0 mm(1)
- 55.09 mm(4)
- 56.0 mm(2)
- 56.11 mm(6)
- 58.0 mm(4)
- 60.0 mm(32)
- 70.0 mm(23)
- 70.02 mm(6)
- 70.11 mm(2)
- 75.0 mm(3)
- 75.04 mm(2)
- 79.55 mm(1)
- 80.0 mm(11)
- 80.04 mm(2)
- 87.23 mm(2)
- 87.5 mm(4)
- 100.0 mm(6)
- 115.0 mm(9)
- 120.0 mm(2)
bis
Bohrstangenmaterial
Bohrstangenmaterial
- C (7)
- S (108)
frontEnd
Stirnseitige Aufnahme
Stirnseitige Aufnahme
- BORING BAR ADAPTER (14)
- CARTRIDGE MOUNT (47)
- COMBI SHELL ADAPTER (10)
- CUTOFF SUPPORT BLADE (16)
- DRILL CHUCK ADAPTER (2)
- DRILL SHANK 2 FLATS (8)
- END MILL ADAPTER (14)
- ER COLLET CHUCK (42)
- EXTENSION (7)
- HYDRAULIC CHUCK (4)
- HYDRAULIC CHUCK-HIGH TORQUE (4)
- HYDRAULIC CHUCK-SLIM LINE (15)
- KM MODULAR ADAPTER (199)
- KM MODULAR ADAPTER-4 UNITS (2)
- REDUCER (17)
- SQUARE SHANK ADAPTER (12)
- SQUARE SHANK ADAPTER-2 SLOTS (2)
- SQUARE SHANK ADAPTER-4 SLOTS (1)
- WHISTLE DRIVE ADAPTER (3)
- WHISTLE NOTCH ADAPTER (16)
Spannsystem
Spannsystem
- C (19)
- D (50)
- M (137)
- N (89)
- P (70)
- S (207)
- W (2)
- Y (64)
Schnittbreite
Schnittbreite
- 0.0197 in(25)
- 0.031 in(25)
- 0.0315 in(25)
- 0.035 in(12)
- 0.039 in(25)
- 0.0394 in(46)
- 0.041 in(25)
- 0.047 in(46)
- 0.0472 in(46)
- 0.055 in(29)
- 0.0551 in(29)
- 0.058 in(25)
- 0.059 in(7)
- 0.0591 in(46)
- 0.061 in(1)
- 0.062 in(46)
- 0.063 in(5)
- 0.0669 in(25)
- 0.067 in(25)
- 0.0689 in(46)
- 0.072 in(21)
- 0.076 in(13)
- 0.0768 in(25)
- 0.077 in(13)
- 0.078 in(29)
- 0.0787 in(50)
- 0.0788 in(4)
- 0.079 in(47)
- 0.083 in(4)
- 0.0837 in(4)
- 0.084 in(12)
- 0.0866 in(46)
- 0.087 in(2)
- 0.088 in(46)
- 0.0886 in(36)
- 0.094 in(53)
- 0.097 in(21)
- 0.098 in(3)
- 0.0984 in(50)
- 0.0988 in(4)
- 0.099 in(4)
- 0.103 in(3)
- 0.105 in(21)
- 0.108 in(25)
- 0.1083 in(46)
- 0.11 in(21)
- 0.118 in(46)
- 0.1181 in(60)
- 0.1182 in(4)
- 0.119 in(9)
- 0.12 in(9)
- 0.122 in(30)
- 0.123 in(13)
- 0.125 in(69)
- 0.126 in(33)
- 0.1278 in(25)
- 0.128 in(21)
- 0.129 in(13)
- 0.13 in(4)
- 0.131 in(10)
- 0.1378 in(56)
- 0.142 in(21)
- 0.147 in(12)
- 0.151 in(25)
- 0.156 in(21)
- 0.157 in(25)
- 0.1574 in(26)
- 0.1575 in(35)
- 0.158 in(4)
- 0.161 in(8)
- 0.162 in(4)
- 0.167 in(10)
- 0.1673 in(21)
- 0.1771 in(31)
- 0.1772 in(31)
- 0.178 in(21)
- 0.185 in(21)
- 0.187 in(4)
- 0.1875 in(4)
- 0.188 in(31)
- 0.189 in(31)
- 0.192 in(10)
- 0.193 in(10)
- 0.195 in(21)
- 0.196 in(21)
- 0.1969 in(10)
- 0.197 in(7)
- 0.198 in(2)
- 0.201 in(2)
- 0.202 in(2)
- 0.213 in(10)
- 0.2165 in(5)
- 0.2166 in(5)
- 0.2362 in(10)
- 0.25 in(10)
- 0.256 in(10)
- -1.0 in(56)
bis
Schnittbreite
Schnittbreite
- 0.5 mm(25)
- 0.787 mm(25)
- 0.8 mm(25)
- 0.889 mm(12)
- 0.991 mm(25)
- -1.0 mm(56)
- 1.0 mm(46)
- 1.041 mm(25)
- 1.19 mm(36)
- 1.194 mm(46)
- 1.2 mm(46)
- 1.39 mm(25)
- 1.397 mm(12)
- 1.4 mm(29)
- 1.404 mm(4)
- 1.473 mm(25)
- 1.49 mm(7)
- 1.5 mm(53)
- 1.55 mm(1)
- 1.57 mm(34)
- 1.575 mm(46)
- 1.6 mm(5)
- 1.69 mm(12)
- 1.7 mm(25)
- 1.702 mm(25)
- 1.75 mm(46)
- 1.829 mm(21)
- 1.94 mm(13)
- 1.95 mm(25)
- 1.956 mm(13)
- 1.981 mm(21)
- 1.99 mm(8)
- 2.0 mm(58)
- 2.007 mm(25)
- 2.12 mm(4)
- 2.125 mm(4)
- 2.13 mm(8)
- 2.2 mm(48)
- 2.235 mm(33)
- 2.236 mm(10)
- 2.24 mm(25)
- 2.25 mm(36)
- 2.38 mm(3)
- 2.387 mm(14)
- 2.388 mm(53)
- 2.39 mm(11)
- 2.464 mm(21)
- 2.49 mm(3)
- 2.5 mm(53)
- 2.51 mm(4)
- 2.511 mm(4)
- 2.62 mm(3)
- 2.667 mm(21)
- 2.74 mm(13)
- 2.743 mm(12)
- 2.75 mm(46)
- 2.794 mm(21)
- 2.997 mm(33)
- 3.0 mm(69)
- 3.05 mm(9)
- 3.099 mm(21)
- 3.1 mm(9)
- 3.11 mm(9)
- 3.12 mm(9)
- 3.125 mm(4)
- 3.13 mm(9)
- 3.17 mm(21)
- 3.175 mm(69)
- 3.176 mm(4)
- 3.177 mm(4)
- 3.18 mm(27)
- 3.2 mm(33)
- 3.245 mm(25)
- 3.25 mm(21)
- 3.251 mm(10)
- 3.27 mm(13)
- 3.3 mm(4)
- 3.301 mm(4)
- 3.302 mm(4)
- 3.32 mm(10)
- 3.329 mm(10)
- 3.5 mm(56)
- 3.607 mm(21)
- 3.73 mm(12)
- 3.835 mm(12)
- 3.84 mm(25)
- 3.96 mm(21)
- 3.962 mm(21)
- 3.974 mm(10)
- 3.988 mm(21)
- 4.0 mm(35)
- 4.094 mm(4)
- 4.1 mm(4)
- 4.11 mm(4)
- 4.12 mm(4)
- 4.242 mm(10)
- 4.25 mm(21)
- 4.5 mm(31)
- 4.521 mm(21)
- 4.699 mm(21)
- 4.76 mm(4)
- 4.762 mm(4)
- 4.775 mm(31)
- 4.78 mm(5)
- 4.785 mm(5)
- 4.788 mm(5)
- 4.8 mm(21)
- 4.801 mm(31)
- 4.88 mm(10)
- 4.9 mm(10)
- 4.95 mm(21)
- 4.953 mm(10)
- 4.978 mm(21)
- 5.0 mm(12)
- 5.004 mm(5)
- 5.1 mm(2)
- 5.12 mm(2)
- 5.13 mm(2)
- 5.41 mm(10)
- 5.5 mm(10)
- 6.0 mm(10)
- 6.35 mm(10)
- 6.36 mm(5)
- 6.502 mm(10)
bis
Stirnseitentyp
Stirnseitentyp
- BKA - Boring Head Adapter (7)
- FDA - Milling Cutter Arbor (10)
- KMM - KM Micro System (40)
- KMS - KM TBD System (17)
- KMT - KM Adapter (167)
- MCS - Modular Cartridge System (47)
- PMK - Prismatic Adapter Kenna (16)
- SZK - Collet Taper (42)
- VKT - Square Shank (15)
- ZYL - Cylindrical Adapter (74)
Wendeschneidplatten-Form
Wendeschneidplatten-Form
- C-DIAMOND/RHOMBIC 80 (118)
- D-DIAMOND/RHOMBIC 55 (136)
- LT-TRIANGLE LAY DOWN THREAD 60 (19)
- N/K-PARALLELOGRAM 55 (4)
- ON EDGE MISC (2)
- PRISMATIC (64)
- R-ROUND (16)
- S-SQUARE 90 (57)
- T-TRIANGLE 60 (71)
- TN-TOP NOTCH (56)
- V-DIAMOND/RHOMBIC 35 (65)
- W-TRIGON 80 (31)
- X-TRIGON 84 (9)
Stirnseitenausführung
Stirnseitenausführung
- BKA01 Intchg Heads (H) Pilot (7)
- FDA03 Longit &Transver Drive (1)
- FDA13 Long&TranDrv&CutRetScr (5)
- FDA23 Longit&Transv Drv&SHCS (4)
- KMM01 Std Km-Micro Size (20)
- KMM02 Enlarged Flange (20)
- KMS-01 Std KM-TBD NotOnCntr (8)
- KMS-02 Englarged Flange OnCntr (9)
- KMT00 All KM, except 02,05,09 (167)
- MCS01 Modular Deep Grooving (47)
- PMK02 Cutoff Sup Bld A1-A3 (8)
- PMK03 CutOffBld A1-A3 Hlfw/Pin (8)
- SZK02 Collets 8 Degree Taper (42)
- VKT01 Std Design (15)
- ZYL01 Straight Shank (26)
- ZYL10 Weldon Shank (4)
- ZYL13 2Deg-Whistle Notch (16)
- ZYL14 Weldon+Whistle Notch (10)
- ZYL22 Boring Bar Shank (7)
- ZYL56 2Plain Clamp Surf w/Pcs (8)
- ZYL63 2Deg Surf w/Cyl.w/drive (3)
Wende-schneid-platten-Größe
Wende-schneid-platten-Größe
- 1 (11)
- 1B (4)
- 1F (4)
- 2 (41)
- 2B (3)
- 3 (38)
- 4 (14)
- 5 (2)
Maximale Stechtiefe
Maximale Stechtiefe
- 0.0 in(13)
- 0.1181 in(3)
- 0.1252 in(1)
- 0.138 in(2)
- 0.1382 in(4)
- 0.1772 in(3)
- 0.2098 in(4)
- 0.21 in(4)
- 0.294 in(2)
- 0.3543 in(1)
- 0.403 in(2)
- 0.4035 in(1)
- 0.4331 in(1)
- 0.5118 in(20)
- 0.5315 in(3)
- 0.532 in(2)
- 0.5512 in(11)
- 0.5708 in(1)
- 0.5709 in(1)
- 0.6299 in(20)
- 0.748 in(1)
- 1.5807 in(2)
bis
Maximale Stechtiefe
Maximale Stechtiefe
- 0.0 mm(13)
- 3.0 mm(3)
- 3.18 mm(1)
- 3.51 mm(6)
- 4.5 mm(3)
- 5.33 mm(8)
- 7.47 mm(2)
- 9.0 mm(1)
- 10.25 mm(3)
- 11.0 mm(1)
- 13.0 mm(20)
- 13.5 mm(5)
- 14.0 mm(11)
- 14.5 mm(2)
- 16.0 mm(20)
- 19.0 mm(1)
- 40.15 mm(2)
bis
Messlänge
Messlänge
- 0.1890 in(6)
- 0.2950 in(1)
- 0.3937 in(1)
- 0.4720 in(1)
- 0.4724 in(3)
- 0.4921 in(1)
- 0.5512 in(12)
- 0.5906 in(1)
- 0.5910 in(1)
- 0.6299 in(12)
- 0.6300 in(1)
- 0.6693 in(1)
- 0.7090 in(1)
- 0.7283 in(1)
- 0.7870 in(1)
- 0.7874 in(9)
- 0.8661 in(2)
- 0.9055 in(1)
- 0.9840 in(5)
- 0.9843 in(19)
- 1.1020 in(2)
- 1.1024 in(1)
- 1.1028 in(2)
- 1.1136 in(2)
- 1.1810 in(4)
- 1.1811 in(9)
- 1.2598 in(1)
- 1.2600 in(4)
- 1.2698 in(1)
- 1.3780 in(4)
- 1.3880 in(2)
- 1.4173 in(1)
- 1.4567 in(2)
- 1.4800 in(2)
- 1.4960 in(3)
- 1.5748 in(5)
- 1.5750 in(4)
- 1.6535 in(1)
- 1.6930 in(3)
- 1.7717 in(2)
- 1.7720 in(6)
- 1.8464 in(2)
- 1.8500 in(7)
- 1.8900 in(4)
- 1.9685 in(8)
- 1.9690 in(1)
- 2.0079 in(1)
- 2.1060 in(4)
- 2.1654 in(5)
- 2.2050 in(1)
- 2.2440 in(4)
- 2.2830 in(4)
- 2.2992 in(1)
- 2.3030 in(6)
- 2.3031 in(1)
- 2.3600 in(1)
- 2.3622 in(23)
- 2.4800 in(4)
- 2.5000 in(10)
- 2.5590 in(3)
- 2.5591 in(7)
- 2.6180 in(4)
- 2.7559 in(14)
- 2.7560 in(3)
- 2.9528 in(3)
- 2.9530 in(1)
- 3.0000 in(1)
- 3.0550 in(1)
- 3.0980 in(1)
- 3.1496 in(26)
- 3.1500 in(3)
- 3.3460 in(5)
- 3.3465 in(2)
- 3.5000 in(3)
- 3.5160 in(1)
- 3.5430 in(3)
- 3.5433 in(7)
- 3.7402 in(2)
- 3.8190 in(3)
- 3.9193 in(1)
- 3.9290 in(1)
- 3.9340 in(1)
- 3.9370 in(14)
- 3.9400 in(1)
- 4.0000 in(7)
- 4.0830 in(1)
- 4.1181 in(2)
- 4.1339 in(3)
- 4.1340 in(1)
- 4.3307 in(1)
- 4.3310 in(4)
- 4.4880 in(2)
- 4.5000 in(2)
- 4.5280 in(1)
- 4.5315 in(1)
- 4.7244 in(15)
- 4.8190 in(2)
- 4.8740 in(2)
- 4.9210 in(1)
- 5.0000 in(1)
- 5.2870 in(1)
- 5.2970 in(1)
- 5.2990 in(1)
- 5.5000 in(2)
- 5.5118 in(4)
- 6.2990 in(6)
- 6.2992 in(5)
- 6.5000 in(1)
- 6.6930 in(9)
- 8.1630 in(1)
- 9.0550 in(1)
- 9.2130 in(1)
- 9.2340 in(2)
- 9.5890 in(1)
- 11.1610 in(1)
- 12.2330 in(2)
- 13.1620 in(1)
- 14.1620 in(1)
- 14.2330 in(2)
- 15.1620 in(1)
- 15.2330 in(2)
- 16.2330 in(2)
- 19.1620 in(1)
- 20.2330 in(2)
Messlänge
Messlänge
- 4.8000 mm(6)
- 7.5000 mm(1)
- 10.0000 mm(1)
- 12.0000 mm(4)
- 12.5000 mm(1)
- 14.0000 mm(12)
- 15.0000 mm(2)
- 16.0000 mm(13)
- 17.0000 mm(1)
- 18.0000 mm(1)
- 18.5000 mm(1)
- 20.0000 mm(10)
- 22.0000 mm(2)
- 23.0000 mm(1)
- 25.0000 mm(22)
- 28.0000 mm(3)
- 28.0120 mm(2)
- 28.2860 mm(2)
- 30.0000 mm(13)
- 32.0000 mm(6)
- 35.0000 mm(4)
- 35.2500 mm(2)
- 36.0000 mm(1)
- 37.0000 mm(2)
- 37.6000 mm(2)
- 38.0000 mm(3)
- 40.0000 mm(9)
- 42.0000 mm(1)
- 43.0000 mm(3)
- 45.0000 mm(8)
- 46.9000 mm(2)
- 47.0000 mm(7)
- 48.0000 mm(4)
- 50.0000 mm(9)
- 51.0000 mm(1)
- 53.5000 mm(4)
- 55.0000 mm(5)
- 56.0000 mm(1)
- 57.0000 mm(4)
- 58.0000 mm(4)
- 58.4000 mm(1)
- 58.5000 mm(7)
- 60.0000 mm(24)
- 63.0000 mm(4)
- 63.5000 mm(10)
- 65.0000 mm(10)
- 66.5000 mm(4)
- 70.0000 mm(17)
- 75.0000 mm(4)
- 76.2000 mm(1)
- 77.6000 mm(1)
- 78.6900 mm(1)
- 80.0000 mm(29)
- 85.0000 mm(7)
- 88.9000 mm(3)
- 89.3100 mm(1)
- 90.0000 mm(12)
- 95.0000 mm(2)
- 97.0000 mm(3)
- 99.5500 mm(1)
- 99.8000 mm(1)
- 100.0000 mm(16)
- 101.6000 mm(7)
- 103.7000 mm(1)
- 104.6000 mm(2)
- 105.0000 mm(4)
- 110.0000 mm(5)
- 114.0000 mm(2)
- 114.3000 mm(2)
- 115.0000 mm(1)
- 115.1000 mm(1)
- 120.0000 mm(15)
- 122.4000 mm(2)
- 123.8000 mm(2)
- 125.0000 mm(1)
- 127.0000 mm(1)
- 134.2900 mm(1)
- 134.5500 mm(2)
- 139.7000 mm(2)
- 140.0000 mm(4)
- 160.0000 mm(11)
- 165.1000 mm(1)
- 170.0000 mm(9)
- 207.3300 mm(1)
- 230.0000 mm(1)
- 234.0000 mm(1)
- 234.5500 mm(2)
- 243.5600 mm(1)
- 283.5000 mm(1)
- 310.7100 mm(2)
- 334.3100 mm(1)
- 359.7300 mm(1)
- 361.5200 mm(2)
- 385.1100 mm(1)
- 386.9200 mm(2)
- 412.3200 mm(2)
- 486.7300 mm(1)
- 513.9200 mm(2)
Größe der Stirnseite
Größe der Stirnseite
- 0.5 in(1)
- 3.0 in(1)
- 6.0 in(4)
- 6.35 in(1)
- 8.0 in(4)
- 9.525 in(1)
- 10.0 in(4)
- 12.0 in(9)
- 12.7 in(1)
- 14.0 in(4)
- 15.875 in(1)
- 16.0 in(14)
- 18.0 in(3)
- 19.05 in(4)
- 19.06 in(1)
- 20.0 in(20)
- 20.18 in(1)
- 22.0 in(3)
- 25.0 in(12)
- 25.4 in(3)
- 25.41 in(1)
- 27.0 in(3)
- 31.75 in(5)
- 32.0 in(29)
- 38.1 in(3)
- 38.11 in(1)
- 40.0 in(69)
- 44.45 in(1)
- 50.0 in(43)
- 50.8 in(5)
- 63.0 in(35)
- 63.5 in(2)
- 80.0 in(9)
- 100.0 in(1)
bis
Größe der Stirnseite
Größe der Stirnseite
- 0.5 mm(1)
- 3.0 mm(1)
- 6.0 mm(4)
- 6.35 mm(1)
- 8.0 mm(4)
- 9.525 mm(1)
- 10.0 mm(4)
- 12.0 mm(9)
- 12.7 mm(1)
- 14.0 mm(4)
- 15.875 mm(1)
- 16.0 mm(14)
- 18.0 mm(3)
- 19.05 mm(4)
- 19.06 mm(1)
- 20.0 mm(20)
- 20.18 mm(1)
- 22.0 mm(3)
- 25.0 mm(12)
- 25.4 mm(3)
- 25.41 mm(1)
- 27.0 mm(3)
- 31.75 mm(5)
- 32.0 mm(29)
- 38.1 mm(3)
- 38.11 mm(1)
- 40.0 mm(69)
- 44.45 mm(1)
- 50.0 mm(43)
- 50.8 mm(5)
- 63.0 mm(35)
- 63.5 mm(2)
- 80.0 mm(9)
- 100.0 mm(1)
bis
insertGeometry
Schneidstoff
Schneidstoff
- B H (329)
- B L (355)
- C A (218)
- C N (220)
- D P (360)
- H T (443)
- H W (601)
backEnd
Aufnahmeart
Aufnahmeart
- Cutoff Blade (3)
- TAPER SHANK (507)
Systemgröße
Systemgröße
- KM12 (48)
- KM16 (85)
- KM1612 (1)
- KM20 (52)
- KM2016 (8)
- KM25 (76)
- KM32 (48)
- KM3225 (38)
- KM32TS (18)
- KM40TS (73)
- KM50 (9)
- KM50TS (50)
- KM63TS (66)
- KM63XMZ (98)
- KM80 (3)
- KM80ATC (75)
- KM80TS (22)
- VDI30 (7)
- VDI40 (29)
- VDI50 (26)
- VDI60 (10)
Hinterer Durchmesser
Hinterer Durchmesser
- 10.0 mm(1)
- 12.0 mm(45)
- 12.7 mm(2)
- 14.0 mm(1)
- 15.875 mm(2)
- 16.0 mm(84)
- 18.0 mm(1)
- 19.0 mm(1)
- 19.05 mm(5)
- 20.0 mm(75)
- 22.0 mm(1)
- 24.0 mm(1)
- 25.0 mm(78)
- 25.4 mm(2)
- 30.0 mm(7)
- 31.75 mm(4)
- 32.0 mm(131)
- 38.1 mm(1)
- 40.0 mm(136)
- 41.275 mm(4)
- 47.0 mm(2)
- 50.0 mm(112)
- 50.8 mm(3)
- 51.0 mm(1)
- 58.294 mm(2)
- 60.0 mm(10)
- 60.325 mm(5)
- 61.96 mm(2)
- 62.0 mm(2)
- 63.0 mm(204)
- 71.96 mm(1)
- 74.0 mm(2)
- 77.962 mm(1)
- 80.0 mm(113)
- 85.0 mm(2)
- 92.0 mm(1)
- 100.0 mm(1)
- 108.035 mm(2)
- 150.0 mm(2)
bis
Hinterer Durchmesser
Hinterer Durchmesser
- 0.3937 in(1)
- 0.5 in(2)
- 0.5512 in(1)
- 0.625 in(2)
- 0.6299 in(2)
- 0.7087 in(1)
- 0.748 in(1)
- 0.75 in(5)
- 0.7874 in(13)
- 0.8661 in(1)
- 0.9449 in(1)
- 0.9843 in(7)
- 1.0 in(2)
- 1.1811 in(7)
- 1.25 in(4)
- 1.2598 in(19)
- 1.5 in(1)
- 1.574 in(1)
- 1.5748 in(44)
- 1.625 in(4)
- 1.8504 in(2)
- 1.9685 in(50)
- 1.97 in(4)
- 2.0 in(3)
- 2.007 in(1)
- 2.295 in(1)
- 2.2955 in(1)
- 2.3622 in(10)
- 2.375 in(5)
- 2.4394 in(2)
- 2.4409 in(2)
- 2.478 in(23)
- 2.48 in(19)
- 2.4803 in(100)
- 2.8331 in(1)
- 2.9134 in(2)
- 3.069 in(1)
- 3.1496 in(47)
- 3.15 in(16)
- 3.3465 in(2)
- 3.622 in(1)
- 3.937 in(1)
- 4.2533 in(2)
- 5.9055 in(2)
bis
Schafthöhe
Schafthöhe
- 0.0 in(4)
- 0.748 in(3)
bis
Schafthöhe
Schafthöhe
- 0.0 mm(4)
- 19.0 mm(3)
bis
Schaftbreite
Schaftbreite
- 0.0709 in(3)
bis
Schaftbreite
Schaftbreite
- 1.8 mm(3)
bis
other
Schneidrichtung
Schneidrichtung
- L (157)
- N (534)
- R (168)
Massives Wendeschneidplatten-Werkzeug
Massives Wendeschneidplatten-Werkzeug
No filters matching ""
