Rotating Boring
Kennametal is a leading provider of high-performance rotating-boring tools. The Romicron™ boring systems are perfect for large-volume productions while the eBore™ fine bore tooling series delivers exceptional accuracy and precision in smaller-volume productions. Whether you're working on high-tolerance parts or need to achieve precise finishes, Kennametal's rotating-boring tools provide the innovations and cutting-edge technology to meet the demands of your machining operations.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (658)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(658)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(658)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(658)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(658)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(658)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(658)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(658)
- M Stainless Steel (563)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(563)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(563)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(563)
- K Cast Iron (504)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(503)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(502)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(502)
- N Non-Ferrous Materials (377)
- N1Wrought Aluminum (348)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(358)
- N3High-Silicon Aluminum Alloys Si >12.2%(143)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (377)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (371)
- N6Carbon, Graphite Composites, CFRP (351)
- N7MMC's (159)
- S High-Temp Alloys (534)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(533)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(533)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(533)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(502)
- H Hardened Materials (241)
- H1Hardened Materials 44-48 HRC(241)
- H2Hardened Materials 48-55 HRC(206)
- H3Hardened Materials 56-60 HRC(154)
- H4Hardened Materials >60 HRC(154)
- C CFRP Materials (237)
- C1CFRP, CFRP / CFRP (229)
- C2CFRP / Aluminium CFRP / Non-Ferrous (158)
Select First Choice
- IN (25)
- US (1)
Applications
Applications
Blind & Cross Hole Finishing (71)
Blind Hole Finishing (133)
Boring (2)
Facing (2)
ID Facing (2)
Multiple Direction Cutting (12)
Profiling (1)
Through & Cross Hole Finishing (71)
Through Hole Finishing (133)
Turning (2)
Cutting Condition Material
Cutting Condition Material
- H-All (111)
- K-All (274)
- M-All (347)
- N-All (148)
- P-All (284)
- S-All (330)
- S4 (48)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (260)
- Lightly Interrupted Cut (406)
- Smooth Cut (605)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (64)
- 91.0 (8)
- 92.0 (23)
- 93.0 (1)
- 95.0 (4)
to
Connection Style
Connection Style
- E-BORE Boring Bar (21)
- Whistle Notch 2 Front (12)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (3)
- 1.0 (53)
- 2.0 (369)
- 3.0 (234)
- 4.0 (89)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 0.3602 in(1)
- 0.3943 in(1)
- 0.4941 in(3)
- 0.5728 in(2)
- 0.5911 in(1)
- 0.6514 in(2)
- 0.6709 in(1)
- 0.6711 in(2)
- 0.7539 in(3)
- 0.756 in(3)
- 0.7756 in(7)
- 0.8091 in(1)
- 0.8139 in(2)
- 0.929 in(2)
- 0.931 in(1)
- 0.9311 in(2)
- 0.935 in(1)
- 0.9704 in(1)
- 0.9705 in(2)
- 0.9998 in(1)
- 1.047 in(2)
- 1.053 in(1)
- 1.162 in(1)
- 1.2052 in(1)
- 1.2076 in(3)
- 1.2087 in(2)
- 1.209 in(1)
- 1.358 in(1)
- 1.437 in(1)
- 1.5236 in(2)
- 1.524 in(1)
- 1.634 in(1)
- 1.7714 in(1)
- 1.7913 in(6)
- 1.8894 in(1)
- 2.0 in(1)
- 2.086 in(1)
- 2.0863 in(1)
- 2.1651 in(1)
- 2.1961 in(1)
- 2.2654 in(1)
- 2.2717 in(1)
- 2.2829 in(2)
- 2.3862 in(1)
- 2.441 in(1)
- 2.4797 in(1)
- 2.6766 in(1)
- 2.6769 in(1)
- 2.695 in(1)
- 2.8734 in(1)
- 3.0705 in(1)
- 3.089 in(1)
- 3.1496 in(1)
- 3.168 in(1)
- 3.2674 in(1)
- 3.561 in(1)
- 3.5614 in(1)
- 3.6611 in(2)
- 3.8579 in(2)
- 4.4485 in(2)
- 4.8422 in(1)
- 5.6296 in(1)
to
Over All Length [L]
Over All Length [L]
- 9.149 mm(1)
- 10.015 mm(1)
- 12.6 mm(3)
- 14.55 mm(1)
- 14.6 mm(1)
- 15.015 mm(1)
- 16.5 mm(2)
- 17.0 mm(3)
- 19.15 mm(3)
- 19.2 mm(3)
- 19.7 mm(7)
- 20.6 mm(1)
- 20.7 mm(2)
- 23.6 mm(2)
- 23.65 mm(3)
- 23.75 mm(1)
- 24.65 mm(3)
- 25.4 mm(1)
- 26.6 mm(2)
- 26.75 mm(1)
- 29.5 mm(1)
- 30.6 mm(1)
- 30.7 mm(6)
- 34.5 mm(1)
- 36.5 mm(1)
- 38.7 mm(3)
- 41.5 mm(1)
- 44.993 mm(1)
- 45.5 mm(6)
- 47.992 mm(1)
- 50.8 mm(1)
- 52.985 mm(1)
- 52.993 mm(1)
- 54.993 mm(1)
- 55.8 mm(1)
- 57.5 mm(1)
- 57.7 mm(1)
- 57.985 mm(2)
- 60.61 mm(1)
- 62.0 mm(1)
- 62.985 mm(1)
- 67.985 mm(1)
- 67.993 mm(1)
- 68.46 mm(1)
- 72.985 mm(1)
- 77.992 mm(1)
- 78.46 mm(1)
- 80.0 mm(1)
- 80.31 mm(1)
- 82.992 mm(1)
- 90.45 mm(1)
- 90.46 mm(1)
- 92.991 mm(1)
- 92.992 mm(1)
- 97.992 mm(2)
- 112.992 mm(2)
- 122.992 mm(1)
- 142.992 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(37)
- 0.001 in(37)
- 0.002 in(47)
- 0.004 in(158)
- 0.007 in(27)
- 0.008 in(231)
- 0.015 in(20)
- 0.016 in(389)
- 0.031 in(365)
- 0.047 in(19)
- 0.063 in(3)
to
Corner Radius
Corner Radius
- 0.0 mm(37)
- 0.025 mm(37)
- 0.05 mm(47)
- 0.1 mm(158)
- 0.175 mm(27)
- 0.2 mm(231)
- 0.375 mm(20)
- 0.4 mm(389)
- 0.8 mm(365)
- 1.2 mm(19)
- 1.6 mm(3)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(729)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(729)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- HCK10 (36)
- K00379 (3)
- K313 (145)
- K68 (96)
- KB1345 (21)
- KB1610 (15)
- KB1630 (55)
- KB5610 (3)
- KB5630 (48)
- KBH10 (45)
- KBH20 (141)
- KC5010 (197)
- KC5025 (176)
- KC5410 (151)
- KC725M (2)
- KC730 (184)
- KC850 (155)
- KCK05 (138)
- KCK05B (34)
- KCK15 (144)
- KCK15B (141)
- KCK20 (151)
- KCK20B (141)
- KCM15 (103)
- KCM15B (139)
- KCM25 (146)
- KCM25B (143)
- KCM25S (37)
- KCM35 (46)
- KCM35B (3)
- KCP05 (50)
- KCP05B (3)
- KCP10 (144)
- KCP10B (146)
- KCP20S (37)
- KCP25 (158)
- KCP25B (156)
- KCP25C (180)
- KCP30 (136)
- KCP30B (7)
- KCPK05 (90)
- KCPK30 (2)
- KCS10 (150)
- KCS10B (150)
- KCS25S (37)
- KCU10 (176)
- KCU10B (199)
- KCU25 (158)
- KCU25B (190)
- KD1400 (143)
- KD1405 (90)
- KD1425 (142)
- KN10S (37)
- KT315 (158)
- KT325 (38)
- KTP10 (131)
- KTP25S (38)
- PB100 (29)
- PB250 (7)
- THM (39)
- THM-X (39)
- TN10P (32)
- TN10U (39)
- TN15M (3)
- TN15U (32)
- TN2000 (39)
- TN20K (39)
- TN20P (39)
- TN30M (32)
- TN4000 (32)
- TN6010 (3)
- TN6025 (3)
- TTR (29)
- TTS (29)
- WBH10P (3)
- WBH10U (32)
- WBH20P (10)
- WBH30P (3)
- WBK45U (7)
- WDN00U (32)
- WDN25U (32)
- WK05CT (3)
- WK15CT (39)
- WK20CT (39)
- WM15CT (32)
- WM25CT (39)
- WP15CT (39)
- WP20TT (29)
- WP25CT (39)
- WP35CT (3)
- WS10PT (39)
- WS25PT (32)
- WU05PT (39)
- WU10HT (39)
- WU10PR (4)
- WU10PT (39)
- WU25PT (39)
Hand Of Tool
Hand Of Tool
- R (33)
Wiper Insert
Wiper Insert
- N (660)
- Y (31)
Drilling Condition Material
Drilling Condition Material
- H-All (16)
- K-All (179)
- M-All (248)
- N-All (55)
- P-All (185)
- S-All (231)
- S4 (1)
F Dimension
F Dimension
- 0.1504 mm(1)
- 2.821 mm(2)
- 3.821 mm(1)
- 4.749 mm(1)
- 4.769 mm(3)
- 5.761 mm(2)
- 5.769 mm(1)
- 6.762 mm(2)
- 6.769 mm(2)
- 7.319 mm(1)
- 7.762 mm(1)
- 7.769 mm(2)
- 9.763 mm(1)
- 12.265 mm(1)
to
F Dimension
F Dimension
- 0.1111 in(2)
- 0.1504 in(2)
- 0.187 in(1)
- 0.1878 in(3)
- 0.2268 in(2)
- 0.2271 in(1)
- 0.2662 in(2)
- 0.2665 in(2)
- 0.2881 in(1)
- 0.3056 in(1)
- 0.3059 in(2)
- 0.4829 in(1)
- 0.6844 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 2.0 mm(1)
- 4.0 mm(1)
- 6.0 mm(4)
- 8.0 mm(2)
- 8.5 mm(2)
- 10.0 mm(4)
- 11.0 mm(2)
- 12.0 mm(3)
- 13.5 mm(2)
- 14.0 mm(4)
- 15.0 mm(1)
- 16.0 mm(4)
- 19.0 mm(1)
- 19.5 mm(1)
- 20.0 mm(1)
- 22.0 mm(1)
- 22.5 mm(1)
- 24.5 mm(1)
- 25.0 mm(3)
- 25.5 mm(2)
- 29.0 mm(2)
- 29.5 mm(2)
- 33.5 mm(1)
- 34.0 mm(2)
- 36.0 mm(2)
- 40.0 mm(1)
- 40.5 mm(1)
- 42.0 mm(1)
- 43.0 mm(2)
- 45.5 mm(1)
- 47.0 mm(1)
- 49.0 mm(1)
- 50.0 mm(1)
- 52.0 mm(2)
- 53.0 mm(1)
- 56.5 mm(1)
- 60.0 mm(2)
- 61.0 mm(1)
- 65.0 mm(3)
- 68.0 mm(1)
- 76.0 mm(1)
- 82.0 mm(1)
- 97.0 mm(1)
- 100.0 mm(2)
- 103.5 mm(1)
- 110.0 mm(1)
- 125.0 mm(1)
- 138.0 mm(3)
- 200.0 mm(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.08 in(1)
- 0.1575 in(1)
- 0.2362 in(3)
- 0.2363 in(1)
- 0.315 in(2)
- 0.3346 in(1)
- 0.335 in(1)
- 0.3937 in(4)
- 0.4331 in(2)
- 0.4724 in(3)
- 0.5315 in(2)
- 0.5511 in(2)
- 0.5512 in(2)
- 0.5906 in(1)
- 0.6299 in(4)
- 0.748 in(1)
- 0.7677 in(1)
- 0.7874 in(1)
- 0.8661 in(1)
- 0.8858 in(1)
- 0.9646 in(1)
- 0.9843 in(3)
- 1.0039 in(2)
- 1.1417 in(2)
- 1.1614 in(2)
- 1.3189 in(1)
- 1.3386 in(2)
- 1.4173 in(2)
- 1.5748 in(1)
- 1.5945 in(1)
- 1.6535 in(1)
- 1.6929 in(2)
- 1.791 in(1)
- 1.8504 in(1)
- 1.9291 in(1)
- 1.9685 in(1)
- 2.0472 in(2)
- 2.0866 in(1)
- 2.2244 in(1)
- 2.3622 in(2)
- 2.4016 in(1)
- 2.5591 in(3)
- 2.6772 in(1)
- 2.9921 in(1)
- 3.2283 in(1)
- 3.82 in(1)
- 3.937 in(2)
- 4.0748 in(1)
- 4.3307 in(1)
- 4.9213 in(1)
- 5.43 in(1)
- 5.4331 in(2)
- 7.874 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.2756 in(1)
- 0.315 in(2)
- 0.3543 in(1)
- 0.374 in(1)
- 0.3937 in(2)
- 0.4528 in(1)
- 0.472 in(2)
- 0.4724 in(3)
- 0.5511 in(2)
- 0.5512 in(2)
- 0.5709 in(1)
- 0.6299 in(4)
- 0.6496 in(1)
- 0.6693 in(1)
- 0.7677 in(1)
- 0.7874 in(4)
- 0.8858 in(1)
- 0.9055 in(1)
- 0.9843 in(1)
- 1.0039 in(1)
- 1.0236 in(1)
- 1.1811 in(2)
- 1.3189 in(1)
- 1.4567 in(2)
- 1.6142 in(1)
- 1.7126 in(1)
- 1.7323 in(1)
- 2.0866 in(1)
- 2.126 in(1)
- 2.28 in(1)
- 2.5591 in(1)
- 2.5984 in(2)
- 3.0315 in(1)
- 3.2677 in(1)
- 3.937 in(1)
- 4.0157 in(1)
- 4.0551 in(1)
- 5.1181 in(1)
- 5.9843 in(1)
- 8.0709 in(1)
- 8.071 in(1)
- 40.1575 in(2)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 7.0 mm(1)
- 8.0 mm(2)
- 9.0 mm(1)
- 9.5 mm(1)
- 10.0 mm(2)
- 11.5 mm(1)
- 12.0 mm(5)
- 14.0 mm(4)
- 14.5 mm(1)
- 16.0 mm(4)
- 16.5 mm(1)
- 17.0 mm(1)
- 19.5 mm(1)
- 20.0 mm(4)
- 22.5 mm(1)
- 23.0 mm(1)
- 25.0 mm(1)
- 25.5 mm(1)
- 26.0 mm(1)
- 30.0 mm(2)
- 33.5 mm(1)
- 37.0 mm(2)
- 41.0 mm(1)
- 43.5 mm(1)
- 44.0 mm(1)
- 53.0 mm(1)
- 54.0 mm(1)
- 58.0 mm(1)
- 65.0 mm(1)
- 66.0 mm(2)
- 77.0 mm(1)
- 83.0 mm(1)
- 100.0 mm(1)
- 102.0 mm(1)
- 103.0 mm(1)
- 130.0 mm(1)
- 152.0 mm(1)
- 205.0 mm(2)
- 1020.0 mm(2)
to
Cutting Direction
Cutting Direction
- B (2)
- E (31)
Rake Angle Style
Rake Angle Style
- NEGATIVE-ZERO (21)
- NEUTRAL (ZERO) (11)
Maximum Bore Depth
Maximum Bore Depth
- 0.562 in(1)
- 0.7871 in(1)
- 0.803 in(1)
- 0.853 in(1)
- 0.9052 in(1)
- 1.042 in(1)
- 1.1021 in(1)
- 1.1043 in(1)
- 1.1808 in(1)
- 1.201 in(1)
- 1.279 in(1)
- 1.2986 in(1)
- 1.338 in(1)
- 1.416 in(1)
- 1.516 in(1)
- 1.573 in(1)
- 1.5742 in(1)
- 1.6926 in(1)
- 1.6948 in(1)
- 1.9064 in(1)
- 2.165 in(1)
- 2.1654 in(1)
- 2.2766 in(1)
- 2.3622 in(2)
- 2.7556 in(2)
- 2.9524 in(2)
- 3.543 in(2)
- 3.9367 in(1)
- 4.7241 in(1)
to
Maximum Bore Depth
Maximum Bore Depth
- 14.27 mm(1)
- 19.993 mm(1)
- 20.4 mm(1)
- 21.7 mm(1)
- 22.992 mm(1)
- 26.46 mm(1)
- 27.993 mm(1)
- 28.048 mm(1)
- 29.993 mm(1)
- 30.5 mm(1)
- 32.5 mm(1)
- 32.985 mm(1)
- 33.985 mm(1)
- 35.96 mm(1)
- 38.5 mm(1)
- 39.96 mm(1)
- 39.985 mm(1)
- 42.993 mm(1)
- 43.048 mm(1)
- 48.423 mm(1)
- 54.992 mm(1)
- 55.0 mm(1)
- 57.827 mm(1)
- 60.0 mm(2)
- 69.992 mm(2)
- 74.991 mm(1)
- 74.992 mm(1)
- 89.992 mm(2)
- 99.992 mm(1)
- 119.992 mm(1)
to
Boring Bar Material
Boring Bar Material
- S (25)
Front-End
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (514)
- T-TRIANGLE 60 (240)
- W-TRIGON 80 (4)
- X-TRIGON 82 (1)
Cartridge Size
Cartridge Size
- 1A. (1)
- 1B. (1)
- 1C. (1)
- 1D. (1)
- 1E. (1)
- 1F. (1)
- 1L. (1)
- 1W (1)
- 1X (1)
- 1Y (1)
- 2A. (1)
- 2B. (1)
- 2C. (1)
- 2D. (1)
- 2E. (1)
- 2F. (1)
- 2L. (3)
- 2W (1)
- 2X (1)
- 2Y (1)
- 3A. (1)
- 3B. (1)
- 3C. (1)
- 3D. (1)
- 3E. (1)
- 3F. (2)
- 3L. (1)
- 3W (1)
- 3X (1)
- 3Y (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.1378 in(1)
- 0.1575 in(2)
- 0.1772 in(1)
- 0.187 in(1)
- 0.1969 in(2)
- 0.2264 in(1)
- 0.236 in(2)
- 0.2362 in(3)
- 0.2756 in(4)
- 0.2855 in(1)
- 0.315 in(4)
- 0.3248 in(1)
- 0.3347 in(1)
- 0.3839 in(1)
- 0.3937 in(4)
- 0.4429 in(1)
- 0.4922 in(1)
- 0.502 in(1)
- 0.5906 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 3.5 mm(1)
- 4.0 mm(2)
- 4.5 mm(1)
- 4.75 mm(1)
- 5.0 mm(2)
- 5.75 mm(1)
- 6.0 mm(5)
- 7.0 mm(4)
- 7.25 mm(1)
- 8.0 mm(4)
- 8.25 mm(1)
- 8.5 mm(1)
- 9.75 mm(1)
- 10.0 mm(4)
- 11.25 mm(1)
- 12.5 mm(1)
- 12.75 mm(1)
- 15.0 mm(1)
to
Gage Length
Gage Length
- 12.5000 in(1)
- 14.6000 in(1)
- 16.0000 in(3)
- 22.5000 in(1)
- 29.5000 in(1)
- 30.0000 in(1)
- 32.5000 in(1)
- 39.9000 in(2)
- 40.0000 in(3)
- 40.1600 in(1)
- 41.0000 in(2)
- 42.5000 in(1)
- 45.0000 in(1)
- 46.4000 in(1)
- 48.0000 in(1)
- 50.0000 in(6)
- 51.7000 in(1)
- 58.6000 in(1)
- 59.8900 in(1)
- 60.0000 in(5)
- 60.1500 in(1)
- 68.0000 in(1)
- 69.9000 in(1)
- 70.0000 in(5)
- 72.0000 in(1)
- 72.0020 in(1)
- 75.0000 in(3)
- 76.0000 in(1)
- 76.0010 in(1)
- 80.0000 in(1)
- 82.0000 in(1)
- 84.0000 in(1)
- 85.0000 in(5)
- 85.4000 in(1)
- 86.0000 in(3)
- 90.0000 in(2)
- 94.0000 in(1)
- 95.4500 in(1)
- 100.0000 in(8)
- 102.0000 in(2)
- 104.0000 in(2)
- 110.0000 in(5)
- 114.0000 in(1)
- 116.0000 in(1)
- 120.0000 in(1)
- 124.4000 in(1)
- 130.0000 in(2)
- 133.0000 in(1)
- 138.0030 in(2)
- 148.0000 in(1)
- 152.0000 in(1)
- 160.0000 in(1)
Gage Length
Gage Length
- 12.5000 mm(1)
- 14.6000 mm(1)
- 16.0000 mm(3)
- 22.5000 mm(1)
- 29.5000 mm(1)
- 30.0000 mm(1)
- 32.5000 mm(1)
- 39.9000 mm(2)
- 40.0000 mm(3)
- 40.1600 mm(1)
- 41.0000 mm(2)
- 42.5000 mm(1)
- 45.0000 mm(1)
- 46.4000 mm(1)
- 48.0000 mm(1)
- 50.0000 mm(6)
- 51.7000 mm(1)
- 58.6000 mm(1)
- 59.8900 mm(1)
- 60.0000 mm(5)
- 60.1500 mm(1)
- 68.0000 mm(1)
- 69.9000 mm(1)
- 70.0000 mm(5)
- 72.0000 mm(1)
- 72.0020 mm(1)
- 75.0000 mm(3)
- 76.0000 mm(1)
- 76.0010 mm(1)
- 80.0000 mm(1)
- 82.0000 mm(1)
- 84.0000 mm(1)
- 85.0000 mm(5)
- 85.4000 mm(1)
- 86.0000 mm(3)
- 90.0000 mm(2)
- 94.0000 mm(1)
- 95.4500 mm(1)
- 100.0000 mm(8)
- 102.0000 mm(2)
- 104.0000 mm(2)
- 110.0000 mm(5)
- 114.0000 mm(1)
- 116.0000 mm(1)
- 120.0000 mm(1)
- 124.4000 mm(1)
- 130.0000 mm(2)
- 133.0000 mm(1)
- 138.0030 mm(2)
- 148.0000 mm(1)
- 152.0000 mm(1)
- 160.0000 mm(1)
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (423)
- T-TRIANGLE 60 (238)
- X-TRIGON 82 (1)
Insert IC Size
Insert IC Size
- 3.967 mm(3)
- 3.969 mm(48)
- 3.97 mm(1)
- 5.556 mm(8)
- 5.56 mm(38)
- 6.35 mm(275)
- 9.525 mm(279)
- 12.7 mm(7)
to
Insert IC Size
Insert IC Size
- 0.156 in(1)
- 0.1562 in(26)
- 0.1563 in(25)
- 0.2188 in(46)
- 0.25 in(275)
- 0.375 in(279)
- 0.5 in(7)
to
Cutting Edge Length
Cutting Edge Length
- 3.445 mm(1)
- 4.03 mm(51)
- 5.556 mm(5)
- 5.646 mm(12)
- 6.448 mm(128)
- 6.45 mm(36)
- 9.62 mm(4)
- 9.624 mm(8)
- 9.63 mm(17)
- 9.672 mm(189)
- 10.999 mm(38)
- 11.0 mm(73)
- 12.9 mm(2)
- 16.498 mm(42)
- 16.5 mm(48)
- 21.997 mm(5)
to
Cutting Edge Length
Cutting Edge Length
- 0.1356 in(1)
- 0.1587 in(11)
- 0.159 in(40)
- 0.2188 in(5)
- 0.2223 in(12)
- 0.2539 in(161)
- 0.254 in(3)
- 0.3789 in(8)
- 0.379 in(4)
- 0.3791 in(17)
- 0.3808 in(189)
- 0.433 in(41)
- 0.4331 in(70)
- 0.508 in(2)
- 0.6495 in(42)
- 0.6496 in(41)
- 0.65 in(7)
- 0.8661 in(5)
to
Chip Breaker CBMD
Chip Breaker CBMD
- FP (66)
- FW (25)
- HP (70)
- K (18)
- LF (263)
- MF (45)
- MP (21)
- UF (15)
Cutting Tool Material
Cutting Tool Material
- B H (52)
- B L (109)
- D P (114)
- H T (120)
- H W (687)
Tolerance Class
Tolerance Class
- G (263)
- H (51)
- M (345)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (12)
System Size
System Size
- BT40 (2)
- BT50 (4)
- CV40 (2)
- CV50 (4)
- DV40 (2)
- DV50 (4)
- HSK100A (5)
- HSK63A (21)
- KM32TS (4)
- KM40TS (6)
- KM50 (2)
- KM50TS (11)
- KM63 (2)
- KM63TS (3)
- KM63XMZ (1)
- KM80 (1)
- KM80TS (5)
- KR32 (11)
- KR50 (6)
- KR63 (3)
- KR80 (3)
Back-End Diameter
Back-End Diameter
- 10.0 mm(5)
- 16.0 mm(38)
- 18.0 mm(1)
- 20.0 mm(1)
- 25.0 mm(1)
- 25.4 mm(1)
- 31.75 mm(2)
- 32.0 mm(4)
- 40.0 mm(6)
- 44.45 mm(6)
- 50.0 mm(13)
- 60.0 mm(6)
- 63.0 mm(27)
- 69.85 mm(12)
- 80.0 mm(6)
- 100.0 mm(5)
to
Back-End Diameter
Back-End Diameter
- 0.2478 in(5)
- 0.6299 in(10)
- 0.7087 in(1)
- 0.7874 in(1)
- 0.9843 in(1)
- 1.0 in(1)
- 1.25 in(2)
- 1.2579 in(2)
- 1.2598 in(2)
- 1.5728 in(1)
- 1.573 in(4)
- 1.5748 in(1)
- 1.75 in(6)
- 1.9665 in(2)
- 1.967 in(5)
- 1.9685 in(6)
- 2.3622 in(6)
- 2.478 in(2)
- 2.4803 in(20)
- 2.75 in(12)
- 3.1476 in(3)
- 3.1496 in(3)
- 3.937 in(5)
to
No filters matching ""
