환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

TMS

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (32)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(32)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(32)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(32)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(32)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(32)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(32)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(32)
    • M Stainless Steel (32)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(32)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(32)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(32)
    • K Cast Iron (32)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(32)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(32)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(32)
    • S High-Temp Alloys (17)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(17)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(17)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(17)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(17)
    • H Hardened Materials (28)
      • H1
        Hardened Materials 44-48 HRC(28)
    Applications
    Applications
    • ID Thread TurningID Thread Turning (7)
    • OD Thread TurningOD Thread Turning (9)
    • Thread MillingThread Milling (23)
    • ThreadingThreading (23)
    Cutting Diameter
    Cutting Diameter
    • 0.354 in(2)
    • 0.3543 in(2)
    • 0.3898 in(1)
    • 0.39 in(1)
    • 0.45 in(2)
    • 0.4528 in(1)
    • 0.61 in(1)
    • 0.6102 in(2)
    • 0.67 in(2)
    • 0.748 in(1)
    • 0.75 in(1)
    • 0.8661 in(1)
    • 0.9843 in(1)
    • 1.0236 in(1)
    • 1.024 in(1)
    • 1.18 in(1)
    • 1.6535 in(1)
    • 1.654 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 8.992 mm(2)
    • 9.0 mm(2)
    • 9.9 mm(1)
    • 10.135 mm(1)
    • 11.43 mm(2)
    • 11.5 mm(1)
    • 15.494 mm(1)
    • 15.5 mm(2)
    • 17.018 mm(2)
    • 19.0 mm(1)
    • 19.05 mm(1)
    • 22.0 mm(1)
    • 25.0 mm(1)
    • 26.0 mm(1)
    • 26.01 mm(1)
    • 29.972 mm(1)
    • 42.0 mm(1)
    • 42.012 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 10.4 mm(2)
    • 10.41 mm(2)
    • 10.92 mm(3)
    • 10.922 mm(1)
    • 11.0 mm(2)
    • 16.0 mm(7)
    • 16.002 mm(2)
    • 26.92 mm(1)
    • 26.924 mm(1)
    • 27.0 mm(2)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.4094 in(2)
    • 0.41 in(2)
    • 0.43 in(4)
    • 0.433 in(2)
    • 0.6299 in(1)
    • 0.63 in(8)
    • 1.06 in(2)
    • 1.063 in(2)
    Cutting Length Min받는 사람Cutting Length Max
    Type of Thread
    Type of Thread
    • BSW (26)
    • M (25)
    • NPS (9)
    • NPT (15)
    • NPTF (15)
    • UN (19)
    Reach
    Reach
    • 0.47 in(1)
    • 0.472 in(2)
    • 0.4724 in(1)
    • 0.61 in(1)
    • 0.6102 in(1)
    • 0.669 in(1)
    • 0.6693 in(1)
    • 0.79 in(1)
    • 0.807 in(1)
    • 0.8661 in(1)
    • 0.87 in(2)
    • 0.9055 in(1)
    • 0.91 in(1)
    • 0.9843 in(1)
    • 1.34 in(1)
    • 1.575 in(1)
    • 1.69 in(1)
    • 1.6929 in(1)
    • 1.77 in(1)
    • 1.7717 in(1)
    • 2.03 in(1)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 11.94 mm(1)
    • 11.99 mm(1)
    • 12.0 mm(2)
    • 15.49 mm(1)
    • 15.5 mm(1)
    • 16.99 mm(1)
    • 17.0 mm(1)
    • 20.07 mm(1)
    • 20.5 mm(1)
    • 22.0 mm(1)
    • 22.1 mm(2)
    • 23.0 mm(1)
    • 23.11 mm(1)
    • 25.0 mm(1)
    • 34.04 mm(1)
    • 40.0 mm(1)
    • 42.93 mm(1)
    • 43.0 mm(1)
    • 44.96 mm(1)
    • 45.0 mm(1)
    • 51.56 mm(1)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (11)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • Weldon (23)
    Number of Flutes
    Number of Flutes
    • 1 (18)
    • 2 (5)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 1.0 (15)
    • 2.0 (32)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 2.7165 in(1)
    • 2.72 in(1)
    • 2.75 in(1)
    • 2.756 in(1)
    • 3.0315 in(1)
    • 3.12 in(1)
    • 3.1496 in(1)
    • 3.3 in(1)
    • 3.3071 in(1)
    • 3.3465 in(1)
    • 3.38 in(1)
    • 3.42 in(1)
    • 3.5 in(1)
    • 3.56 in(2)
    • 3.583 in(1)
    • 3.858 in(1)
    • 3.937 in(1)
    • 4.02 in(1)
    • 4.38 in(1)
    • 4.65 in(1)
    • 4.7244 in(1)
    • 4.9213 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 69.0 mm(1)
    • 69.088 mm(1)
    • 69.85 mm(1)
    • 70.0 mm(1)
    • 77.0 mm(1)
    • 79.248 mm(1)
    • 80.0 mm(1)
    • 83.82 mm(1)
    • 84.0 mm(1)
    • 85.0 mm(1)
    • 85.852 mm(1)
    • 86.868 mm(1)
    • 88.9 mm(1)
    • 90.424 mm(2)
    • 91.0 mm(1)
    • 98.0 mm(1)
    • 100.0 mm(1)
    • 102.108 mm(1)
    • 111.252 mm(1)
    • 118.11 mm(1)
    • 120.0 mm(1)
    • 125.0 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • KC610M (17)
    • KC620M (13)
    • KC635M (28)
    Hand Of Tool
    Hand Of Tool
    • R (23)
    Wiper Insert
    Wiper Insert
    • N (9)
    Countersunk Angle
    Countersunk Angle
    • 27.5 (7)
    • 30.0 (2)
    Countersunk Angle Min받는 사람Countersunk Angle Max
    frontEnd
    Cutting Width
    Cutting Width
    • 0.37 in(1)
    • 0.55 in(2)
    • 0.57 in(2)
    • 0.58 in(1)
    • 0.59 in(1)
    • 0.91 in(1)
    • 0.94 in(1)
    Cutting Width Min받는 사람Cutting Width Max
    Cutting Width
    Cutting Width
    • 9.398 mm(1)
    • 13.97 mm(2)
    • 14.478 mm(2)
    • 14.732 mm(1)
    • 14.986 mm(1)
    • 23.114 mm(1)
    • 23.876 mm(1)
    Cutting Width Min받는 사람Cutting Width Max
    Thread TPI
    Thread TPI
    • 11.0 (16)
    • 11.5 (9)
    • 12.0 (10)
    • 14.0 (17)
    • 16.0 (15)
    • 18.0 (10)
    • 19.0 (7)
    • 20.0 (19)
    • 24.0 (15)
    • 27.0 (9)
    • 32.0 (9)
    Thread TPI Min받는 사람Thread TPI Max
    Thread Pitch
    Thread Pitch
    • 0.75 mm(4)
    • 1.0 mm(19)
    • 1.25 mm(19)
    • 1.5 mm(24)
    • 1.75 mm(9)
    • 2.0 mm(14)
    • 3.5 mm(4)
    • 4.0 mm(4)
    Thread Pitch Min받는 사람Thread Pitch Max
    Thread Pitch
    Thread Pitch
    • 0.75 in(4)
    • 1.0 in(19)
    • 1.25 in(19)
    • 1.5 in(24)
    • 1.75 in(9)
    • 2.0 in(14)
    • 3.5 in(4)
    • 4.0 in(4)
    Thread Pitch Min받는 사람Thread Pitch Max
    Neck Diameter
    Neck Diameter
    • 0.2677 in(2)
    • 0.29 in(1)
    • 0.2913 in(1)
    • 0.3504 in(1)
    • 0.4803 in(1)
    • 0.49 in(1)
    • 0.4921 in(1)
    • 0.59 in(1)
    • 0.5906 in(1)
    • 0.7324 in(1)
    • 0.748 in(1)
    • 0.8858 in(1)
    • 0.94 in(1)
    • 1.4173 in(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 6.8 mm(2)
    • 7.366 mm(1)
    • 7.4 mm(1)
    • 8.9 mm(1)
    • 12.2 mm(1)
    • 12.446 mm(1)
    • 12.5 mm(1)
    • 14.986 mm(1)
    • 15.0 mm(1)
    • 18.6 mm(1)
    • 19.0 mm(1)
    • 22.5 mm(1)
    • 23.876 mm(1)
    • 36.0 mm(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    insertGeometry
    Shape
    Shape
    • TM-TRIANGLE THREAD MILL 60 (9)
    Insert IC Size
    Insert IC Size
    • 6.35 mm(1)
    • 9.525 mm(6)
    • 15.875 mm(2)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.25 in(1)
    • 0.375 in(6)
    • 0.625 in(2)
    Insert IC Size Min받는 사람Insert IC Size Max
    Cutting Tool Material
    Cutting Tool Material
    • H W (9)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (23)
    Back-End Diameter
    Back-End Diameter
    • 12.0 mm(2)
    • 12.7 mm(2)
    • 15.875 mm(2)
    • 16.0 mm(2)
    • 19.05 mm(5)
    • 20.0 mm(3)
    • 25.0 mm(3)
    • 25.4 mm(2)
    • 31.75 mm(1)
    • 32.0 mm(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.4724 in(2)
    • 0.5 in(2)
    • 0.625 in(2)
    • 0.6299 in(2)
    • 0.75 in(5)
    • 0.7874 in(3)
    • 0.9843 in(3)
    • 1.0 in(2)
    • 1.25 in(1)
    • 1.2598 in(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • N (9)
    Number of Inserts
    Number of Inserts
    • 1.0 (18)
    • 2.0 (5)
    Number of Inserts Min받는 사람Number of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 0.47 in(1)
    • 0.472 in(1)
    • 0.4724 in(2)
    • 0.61 in(1)
    • 0.6102 in(1)
    • 0.669 in(1)
    • 0.6693 in(1)
    • 0.79 in(1)
    • 0.807 in(1)
    • 0.8661 in(1)
    • 0.87 in(2)
    • 0.9055 in(1)
    • 0.91 in(1)
    • 0.9843 in(1)
    • 1.34 in(1)
    • 1.575 in(1)
    • 1.69 in(1)
    • 1.6929 in(1)
    • 1.77 in(1)
    • 1.7717 in(1)
    • 2.03 in(1)
    Head Length [L2] Min받는 사람Head Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 11.938 mm(1)
    • 11.989 mm(1)
    • 12.0 mm(2)
    • 15.494 mm(1)
    • 15.5 mm(1)
    • 16.993 mm(1)
    • 17.0 mm(1)
    • 20.066 mm(1)
    • 20.5 mm(1)
    • 22.0 mm(1)
    • 22.098 mm(2)
    • 23.0 mm(1)
    • 23.114 mm(1)
    • 25.0 mm(1)
    • 34.036 mm(1)
    • 40.0 mm(1)
    • 42.926 mm(1)
    • 43.0 mm(1)
    • 44.958 mm(1)
    • 45.0 mm(1)
    • 51.562 mm(1)
    Head Length [L2] Min받는 사람Head Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    TMS
    Tapered Thread Mills
    (12)

    Tapered Thread Mills

    Parallel Thread Mills
    (11)

    Parallel Thread Mills

    Inserts
    (9)

    Inserts

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk