환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

가동 중단 시간 최소화

HARVI IV 8-날 엔드밀은 Kennametal의 고성능 다목적 엔드밀 HARVI 제품군에 추가된 최신 제품입니다. 7-날 엔드밀보다 더 높은 금속 제거율과 이송 속도를 제공하고 기존 9-날 엔드밀보다 더욱 다양한 기능을 제공하는 독특한 디자인의 HARVI IV 8-날 엔드밀은 고객이 가공하기 어려운 재료를 계속 절단할 수 있도록 합니다. 관통 절삭유 채널에서 강력한 칩 제거를 달성하면서 고온 합금, 스테인리스강, 강철 및 경화 자재에 대해 신뢰할 수 있는 단일 공구로 황삭 및 정삭 작업을 수행합니다. 8날 장착을 통해 업그레이드하고 가동 중단 시간을 최소화하십시오.

  • 직경 범위 3/8~1”, 10~25mm
  • 길이 범위 1.2~4.3xD
  • 내부 관통 쿨런트
  • 절삭 길이가 2xD를 초과하는 버전에 칩 스플리터 장착

 

아무리 거친 소재라도 어림 없습니다

  • 8날 디자인: 더 높은 가공 유연성과 공정 안정성으로 생산성 향상
  • 새로운 KCSM15A 등급 적용: 혁신적인 코팅 기술로 공구 수명 연장 및 내마모성 강화
  • 관통 쿨런트 공급: 칩을 제거하여 깊은 공동에서도 계속 절단 가능

당사의 새로운 KCSM15A 밀링 등급 적용

매우 다양한 용도의 HARVI IV 8-날 엔드밀은 당사의 새로운 스테인리스강, 티타늄 및 고온 합금 고체 엔드 밀링 등급 KCSM15A로 보완됩니다. 이 새로운 등급은 사용자에게 확장된 공구 수명을 제공하며 Kennametal의 견고한 카바이드 엔드 밀링 역사상 최고의 내마모성을 자랑하는 혁신적인 코팅 기술을 적용했습니다.

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (390)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(390)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(390)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(390)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(390)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(390)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(390)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(390)
    • M Stainless Steel (390)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(390)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(390)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(390)
    • S High-Temp Alloys (390)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(390)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(390)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(390)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(390)
    • H Hardened Materials (390)
      • H1
        Hardened Materials 44-48 HRC(390)
      • H2
        Hardened Materials 48-55 HRC(390)
    Applications
    Applications
    • PocketPocket (390)
    • Pocket HelicalPocket Helical (390)
    • Pocket MillingPocket Milling (390)
    • RampingRamping (390)
    • Shoulder MillingShoulder Milling (390)
    • Shoulder RoughingShoulder Roughing (390)
    • Shoulder Square EndShoulder Square End (390)
    • Trochoidal MillingTrochoidal Milling (390)
    Cutting Diameter
    Cutting Diameter
    • 0.375 in(18)
    • 0.3937 in(12)
    • 0.4724 in(24)
    • 0.5 in(56)
    • 0.625 in(60)
    • 0.6299 in(28)
    • 0.75 in(60)
    • 0.7874 in(32)
    • 0.9843 in(28)
    • 1.0 in(72)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 9.525 mm(18)
    • 10.0 mm(12)
    • 12.0 mm(24)
    • 12.7 mm(56)
    • 15.875 mm(60)
    • 16.0 mm(28)
    • 19.05 mm(60)
    • 20.0 mm(32)
    • 25.0 mm(28)
    • 25.4 mm(72)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 12.7 mm(4)
    • 15.875 mm(12)
    • 19.05 mm(16)
    • 22.0 mm(6)
    • 25.4 mm(27)
    • 26.0 mm(12)
    • 31.75 mm(38)
    • 32.0 mm(14)
    • 38.0 mm(16)
    • 38.1 mm(3)
    • 40.0 mm(6)
    • 41.275 mm(48)
    • 44.45 mm(12)
    • 45.0 mm(14)
    • 47.625 mm(12)
    • 48.0 mm(12)
    • 50.8 mm(22)
    • 57.15 mm(12)
    • 63.5 mm(24)
    • 64.0 mm(14)
    • 80.0 mm(16)
    • 82.55 mm(24)
    • 100.0 mm(14)
    • 101.6 mm(12)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.5 in(4)
    • 0.625 in(12)
    • 0.75 in(16)
    • 0.8661 in(6)
    • 1.0 in(27)
    • 1.0236 in(12)
    • 1.25 in(38)
    • 1.2598 in(14)
    • 1.4961 in(16)
    • 1.5 in(3)
    • 1.5748 in(6)
    • 1.625 in(48)
    • 1.75 in(12)
    • 1.7717 in(14)
    • 1.875 in(12)
    • 1.8898 in(12)
    • 2.0 in(22)
    • 2.25 in(12)
    • 2.5 in(24)
    • 2.5197 in(14)
    • 3.1496 in(16)
    • 3.25 in(24)
    • 3.937 in(14)
    • 4.0 in(12)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.67 in(4)
    • 0.8517 in(12)
    • 0.92 in(4)
    • 1.0333 in(12)
    • 1.0446 in(6)
    • 1.17 in(3)
    • 1.2267 in(12)
    • 1.2378 in(12)
    • 1.34 in(12)
    • 1.42 in(4)
    • 1.4767 in(10)
    • 1.5333 in(12)
    • 1.5454 in(14)
    • 1.67 in(3)
    • 1.7033 in(12)
    • 1.7533 in(6)
    • 1.8517 in(12)
    • 1.853 in(16)
    • 1.9083 in(12)
    • 1.965 in(24)
    • 2.1039 in(12)
    • 2.1583 in(12)
    • 2.2033 in(12)
    • 2.2178 in(14)
    • 2.2267 in(10)
    • 2.4533 in(12)
    • 2.59 in(12)
    • 2.7833 in(12)
    • 2.8052 in(14)
    • 2.9533 in(12)
    • 3.5065 in(16)
    • 3.59 in(12)
    • 3.7033 in(12)
    • 4.3832 in(14)
    • 4.4533 in(12)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 17.018 mm(4)
    • 21.632 mm(12)
    • 23.368 mm(4)
    • 26.246 mm(12)
    • 26.533 mm(6)
    • 29.718 mm(3)
    • 31.157 mm(12)
    • 31.44 mm(12)
    • 34.035 mm(12)
    • 36.068 mm(4)
    • 37.507 mm(10)
    • 38.946 mm(12)
    • 39.253 mm(14)
    • 42.418 mm(3)
    • 43.264 mm(12)
    • 44.533 mm(6)
    • 47.032 mm(12)
    • 47.066 mm(16)
    • 48.471 mm(12)
    • 49.91 mm(24)
    • 53.44 mm(12)
    • 54.821 mm(12)
    • 55.964 mm(12)
    • 56.333 mm(14)
    • 56.557 mm(10)
    • 62.314 mm(12)
    • 65.785 mm(12)
    • 70.696 mm(12)
    • 71.253 mm(14)
    • 75.014 mm(12)
    • 89.066 mm(16)
    • 91.185 mm(12)
    • 94.064 mm(12)
    • 111.333 mm(14)
    • 113.114 mm(12)
    Reach Min받는 사람Reach Max
    Connection Style
    Connection Style
    • SAFE-LOCK (180)
    • Straight-Cylindrical (210)
    Over All Length [L]
    Over All Length [L]
    • 2.5 in(8)
    • 2.8346 in(6)
    • 3.0 in(43)
    • 3.2677 in(12)
    • 3.5 in(37)
    • 3.5433 in(6)
    • 3.622 in(14)
    • 4.0 in(82)
    • 4.0945 in(16)
    • 4.1339 in(12)
    • 4.5 in(12)
    • 4.7638 in(14)
    • 4.9213 in(14)
    • 5.0 in(36)
    • 5.5 in(12)
    • 5.7087 in(16)
    • 6.0 in(24)
    • 6.8898 in(14)
    • 7.0 in(12)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 63.5 mm(8)
    • 72.0 mm(6)
    • 76.2 mm(43)
    • 83.0 mm(12)
    • 88.9 mm(37)
    • 90.0 mm(6)
    • 92.0 mm(14)
    • 101.6 mm(82)
    • 104.0 mm(16)
    • 105.0 mm(12)
    • 114.3 mm(12)
    • 121.0 mm(14)
    • 125.0 mm(14)
    • 127.0 mm(36)
    • 139.7 mm(12)
    • 145.0 mm(16)
    • 152.4 mm(24)
    • 175.0 mm(14)
    • 177.8 mm(12)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Style
    Corner Style
    • RADIUS (325)
    • SQUARE END (65)
    Corner Radius
    Corner Radius
    • 0.0 in(65)
    • 0.015 in(9)
    • 0.02 in(18)
    • 0.03 in(47)
    • 0.039 in(18)
    • 0.06 in(47)
    • 0.079 in(18)
    • 0.09 in(30)
    • 0.098 in(18)
    • 0.118 in(18)
    • 0.12 in(42)
    • 0.157 in(12)
    • 0.19 in(32)
    • 0.236 in(4)
    • 0.25 in(12)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 0.0 mm(65)
    • 0.375 mm(9)
    • 0.5 mm(18)
    • 0.75 mm(47)
    • 1.0 mm(18)
    • 1.525 mm(47)
    • 2.0 mm(18)
    • 2.275 mm(30)
    • 2.5 mm(18)
    • 3.0 mm(18)
    • 3.05 mm(42)
    • 4.0 mm(12)
    • 4.825 mm(32)
    • 6.0 mm(4)
    • 6.35 mm(12)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Rough Finish
    Rough Finish
    • FBS (212)
    • F (178)
    backEnd
    Back-End Diameter
    Back-End Diameter
    • 9.525 mm(18)
    • 10.0 mm(12)
    • 12.0 mm(24)
    • 12.7 mm(56)
    • 15.875 mm(60)
    • 16.0 mm(28)
    • 19.05 mm(60)
    • 20.0 mm(32)
    • 25.0 mm(28)
    • 25.4 mm(72)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.375 in(18)
    • 0.3937 in(12)
    • 0.4724 in(24)
    • 0.5 in(56)
    • 0.625 in(60)
    • 0.6299 in(28)
    • 0.75 in(60)
    • 0.7874 in(32)
    • 0.9843 in(28)
    • 1.0 in(72)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    No filters matching ""
    HARVI™ IV High-Performance Solid Carbide End Mills
    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Inch
    (45)

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Inch

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Inch
    (65)

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Inch

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Inch
    (58)

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Inch

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Plain Shank • Inch
    (51)

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Plain Shank • Inch

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Plain Shank • Inch
    (11)

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Plain Shank • Inch

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Metric
    (24)

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Metric

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Plain Shank • Metric
    (29)

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Plain Shank • Metric

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Metric
    (24)

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Metric

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Metric
    (29)

    HARVI™ IV • Radiused • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Metric

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Metric
    (4)

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Metric

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Plain Shank • Metric
    (5)

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Plain Shank • Metric

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Metric
    (4)

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Metric

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Inch
    (9)

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Safe-LockTM Shank • Inch

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Inch
    (15)

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Inch

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Metric
    (5)

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Plain Shank • Metric

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Inch
    (12)

    HARVI™ IV • Square End • 8 Flutes • Internal Coolant • Chipbreaker • Safe LockTM Shank • Inch

    문의 사항이 있으십니까?

    당사의 숙련된 직원들이 귀하를 도와드릴 준비가 되어 있습니다.

    추가 정보 요청
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk