인서트당 절삭날이 12개씩 있는 페이스 밀링 제품

  • Dodeka Mini, Dodeka 및 Dodeka MAX™ 페이스 밀링 플랫폼은 현재 시중에서 가장 포괄적인 페이스 밀링 부스터입니다.
  • 인서트당 절삭날이 12개라는 것은 날당 비용이 저렴하고 생산성이 향상된다는 뜻입니다.
  • Beyond™ 프리미엄 밀링 재종을 사용하면 MRR(금속 제거율)이 최대 30% 더 높아지고, 부드러운 절삭 동작으로 인해 절삭력이 25% 더 낮아지며, 경량에서 중장비 가공까지 공구 수명이 최대 35% 향상됩니다.

특징 및 장점

  • 인서트당 12개의 정밀한 절삭날
  • 낮은 절삭력, 매우 부드러운 절삭 동작
  • 칩 형성 및 배출력 향상
  • 기계강, 스테인리스강 및 고온 합금에 대한 동급 최고의 인서트 형상/재종 조합
  • 우수한 바닥 마감
  • 향상된 가공 기능
  • 새로운 하이 포지티브 형상
필터 선택
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (272)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(249)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(249)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(254)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(267)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(267)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(249)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(249)
    • M Stainless Steel (267)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(267)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(267)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(267)
    • K Cast Iron (259)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(258)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(258)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(259)
    • N Non-Ferrous Materials (165)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(164)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(164)
      • N1
        Wrought Aluminum (165)
    • S High-Temp Alloys (260)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(240)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(240)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(260)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(240)
    • H Hardened Materials (197)
      • H1
        Hardened Materials 44-48 HRC(197)
    1차 선택 선택
    • BR (32)
    • CN (101)
    • DE (114)
    • GB (71)
    • IN (42)
    • SG (54)
    • US (114)
    Applications
    Applications
    • Chamfer MillingChamfer Milling (140)
    • Face MillingFace Milling (167)
    Cutting Diameter
    Cutting Diameter
    • 0.984 in(7)
    • 1.0 in(7)
    • 1.25 in(7)
    • 1.26 in(8)
    • 1.5 in(5)
    • 1.57 in(1)
    • 1.5748 in(4)
    • 1.575 in(5)
    • 1.9685 in(6)
    • 1.969 in(3)
    • 2.0 in(9)
    • 2.48 in(4)
    • 2.4803 in(6)
    • 2.5 in(9)
    • 3.0 in(11)
    • 3.1496 in(6)
    • 3.15 in(5)
    • 3.937 in(10)
    • 4.0 in(9)
    • 4.921 in(3)
    • 4.9213 in(7)
    • 5.0 in(9)
    • 6.0 in(5)
    • 6.299 in(1)
    • 6.2992 in(4)
    • 7.874 in(3)
    • 8.0 in(2)
    • 9.8425 in(3)
    • 10.0 in(3)
    • 12.0 in(2)
    • 12.4016 in(3)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 25.0 mm(7)
    • 25.4 mm(7)
    • 31.75 mm(7)
    • 32.0 mm(8)
    • 38.1 mm(5)
    • 40.0 mm(10)
    • 50.0 mm(9)
    • 50.8 mm(9)
    • 63.0 mm(10)
    • 63.5 mm(9)
    • 76.2 mm(11)
    • 80.0 mm(11)
    • 100.0 mm(10)
    • 101.6 mm(9)
    • 125.0 mm(10)
    • 127.0 mm(9)
    • 152.4 mm(5)
    • 160.0 mm(5)
    • 200.0 mm(3)
    • 203.2 mm(2)
    • 250.0 mm(3)
    • 254.0 mm(3)
    • 304.8 mm(2)
    • 315.0 mm(3)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 1.63 mm(10)
    • 1.65 mm(5)
    • 2.21 mm(12)
    • 3.2 mm(12)
    • 3.23 mm(44)
    • 4.3 mm(21)
    • 4.47 mm(2)
    • 4.5 mm(31)
    • 4.51 mm(12)
    • 8.0 mm(18)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.064 in(10)
    • 0.065 in(5)
    • 0.087 in(12)
    • 0.127 in(56)
    • 0.171 in(21)
    • 0.176 in(2)
    • 0.177 in(31)
    • 0.1777 in(12)
    • 0.315 in(18)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 1.25 in(7)
    • 1.26 in(7)
    • 1.5 in(7)
    • 1.57 in(5)
    • 1.5748 in(2)
    • 1.575 in(47)
    • 1.595 in(2)
    • 1.75 in(18)
    • 1.77 in(2)
    • 1.968 in(2)
    • 1.9684 in(1)
    • 1.9685 in(4)
    • 1.969 in(18)
    • 2.375 in(5)
    • 2.38 in(12)
    • 2.4 in(2)
    • 2.48 in(15)
    • 2.4803 in(6)
    • 3.15 in(5)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 31.75 mm(7)
    • 32.0 mm(7)
    • 38.1 mm(7)
    • 39.878 mm(5)
    • 40.0 mm(49)
    • 40.512 mm(2)
    • 44.45 mm(18)
    • 44.962 mm(2)
    • 50.0 mm(25)
    • 60.325 mm(5)
    • 60.45 mm(2)
    • 60.452 mm(10)
    • 60.964 mm(2)
    • 63.0 mm(21)
    • 80.0 mm(5)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 15.0 (27)
    • 45.0 (119)
    • 58.0 (21)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (99)
    • B-Cutter Retention Screw (11)
    • C-Bolt Circle (16)
    • KL Screw (3)
    • SHCS or RetScrw Or BoltCircle (5)
    • Screw-On Connection (7)
    • Straight-Cylindrical (17)
    • Weldon (9)
    Number of Flutes
    Number of Flutes
    • 10 (7)
    • 11 (2)
    • 12 (13)
    • 14 (5)
    • 16 (6)
    • 18 (2)
    • 2 (4)
    • 20 (2)
    • 24 (2)
    • 3 (19)
    • 4 (28)
    • 5 (26)
    • 6 (22)
    • 7 (2)
    • 8 (18)
    • 9 (9)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 6.0 (112)
    • 12.0 (307)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.57 in(5)
    • 1.5748 in(2)
    • 1.575 in(39)
    • 1.595 in(2)
    • 1.75 in(18)
    • 1.77 in(2)
    • 1.968 in(2)
    • 1.9684 in(1)
    • 1.9685 in(4)
    • 1.969 in(14)
    • 2.224 in(2)
    • 2.375 in(5)
    • 2.38 in(12)
    • 2.4 in(2)
    • 2.465 in(2)
    • 2.48 in(15)
    • 2.4803 in(6)
    • 2.539 in(3)
    • 3.15 in(5)
    • 3.228 in(1)
    • 3.28 in(2)
    • 3.78 in(2)
    • 3.819 in(2)
    • 4.213 in(4)
    • 4.724 in(3)
    • 4.8 in(4)
    • 5.118 in(3)
    • 5.2 in(3)
    • 7.874 in(1)
    • 8.0 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 39.878 mm(5)
    • 40.0 mm(41)
    • 40.512 mm(2)
    • 44.45 mm(18)
    • 44.962 mm(2)
    • 50.0 mm(21)
    • 56.5 mm(2)
    • 60.325 mm(5)
    • 60.45 mm(2)
    • 60.452 mm(10)
    • 60.964 mm(2)
    • 62.6 mm(2)
    • 63.0 mm(21)
    • 64.5 mm(3)
    • 80.0 mm(5)
    • 82.0 mm(1)
    • 83.3 mm(2)
    • 96.0 mm(2)
    • 97.0 mm(2)
    • 107.0 mm(4)
    • 120.0 mm(3)
    • 121.9 mm(2)
    • 121.92 mm(2)
    • 130.0 mm(3)
    • 132.08 mm(1)
    • 132.1 mm(2)
    • 200.0 mm(1)
    • 203.2 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • 0.039 in(140)
    • 0.047 in(135)
    • 0.063 in(112)
    • 0.079 in(27)
    • 0.126 in(99)
    • 0.138 in(20)
    • 0.171 in(71)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • 1.0 mm(140)
    • 1.2 mm(135)
    • 1.6 mm(112)
    • 2.0 mm(27)
    • 3.2 mm(99)
    • 3.5 mm(20)
    • 4.35 mm(71)
    Corner Radius Min받는 사람Corner Radius Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K313 (93)
    • KC410M (141)
    • KC510M (94)
    • KC520M (157)
    • KC522M (167)
    • KC725M (184)
    • KCK15 (183)
    • KCK20B (183)
    • KCKP10 (113)
    • KCPK30 (187)
    • KCPM20 (155)
    • KCPM40 (186)
    • KCSM30 (58)
    • KCSM40 (185)
    • KTPK20 (57)
    • KY3500 (46)
    Hand Of Tool
    Hand Of Tool
    • R (167)
    Wiper Insert
    Wiper Insert
    • N (108)
    • Y (43)
    frontEnd
    Neck Diameter
    Neck Diameter
    • 0.76 in(3)
    • 0.945 in(1)
    • 0.957 in(3)
    • 0.965 in(1)
    • 1.006 in(6)
    • 1.059 in(1)
    • 1.256 in(11)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 19.3 mm(3)
    • 24.0 mm(1)
    • 24.3 mm(3)
    • 24.5 mm(1)
    • 25.55 mm(6)
    • 26.9 mm(1)
    • 31.9 mm(11)
    Neck Diameter Min받는 사람Neck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • H-HEXAGON 120 (151)
    Insert IC Size
    Insert IC Size
    • 12.0 mm(61)
    • 15.875 mm(70)
    • 22.225 mm(20)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.472 in(61)
    • 0.625 in(70)
    • 0.875 in(20)
    Insert IC Size Min받는 사람Insert IC Size Max
    Cutting Edge Length
    Cutting Edge Length
    • 4.1 mm(6)
    • 6.19 mm(5)
    • 6.41 mm(6)
    • 6.433 mm(7)
    • 6.44 mm(11)
    • 6.442 mm(14)
    • 6.443 mm(11)
    • 7.2 mm(6)
    • 8.495 mm(14)
    • 8.58 mm(2)
    • 8.582 mm(16)
    • 8.59 mm(4)
    • 8.593 mm(23)
    • 9.17 mm(1)
    • 9.56 mm(1)
    • 9.563 mm(4)
    • 12.106 mm(4)
    • 12.29 mm(2)
    • 12.83 mm(5)
    • 12.832 mm(9)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Cutting Edge Length
    Cutting Edge Length
    • 0.161 in(6)
    • 0.244 in(5)
    • 0.2524 in(2)
    • 0.2525 in(4)
    • 0.2533 in(7)
    • 0.2536 in(14)
    • 0.2537 in(11)
    • 0.254 in(11)
    • 0.283 in(6)
    • 0.334 in(7)
    • 0.3345 in(7)
    • 0.3379 in(16)
    • 0.338 in(6)
    • 0.3383 in(23)
    • 0.361 in(1)
    • 0.3765 in(4)
    • 0.377 in(1)
    • 0.4766 in(4)
    • 0.4839 in(2)
    • 0.505 in(5)
    • 0.5052 in(9)
    Cutting Edge Length Min받는 사람Cutting Edge Length Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GD (35)
    • GM (4)
    • GP (7)
    • HD (62)
    • LD (30)
    • LM (4)
    • LP (8)
    Cutting Tool Material
    Cutting Tool Material
    • C N (1)
    • H W (145)
    Tolerance Class
    Tolerance Class
    • D (4)
    • E (1)
    • G (72)
    • P (74)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (26)
    • SCREW-ON (7)
    • SHELL MILL (134)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(4)
    • 19.05 mm(25)
    • 20.0 mm(4)
    • 22.0 mm(25)
    • 25.0 mm(10)
    • 25.4 mm(17)
    • 27.0 mm(11)
    • 29.0 mm(7)
    • 31.75 mm(5)
    • 32.0 mm(10)
    • 38.1 mm(13)
    • 40.0 mm(15)
    • 50.8 mm(5)
    • 60.0 mm(9)
    • 63.5 mm(7)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(4)
    • 0.75 in(25)
    • 0.7874 in(4)
    • 0.8661 in(25)
    • 0.9843 in(10)
    • 1.0 in(17)
    • 1.063 in(10)
    • 1.064 in(1)
    • 1.1417 in(5)
    • 1.142 in(2)
    • 1.25 in(5)
    • 1.2598 in(9)
    • 1.26 in(1)
    • 1.5 in(13)
    • 1.5748 in(15)
    • 2.0 in(5)
    • 2.3622 in(9)
    • 2.5 in(7)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • N (151)
    Number of Inserts
    Number of Inserts
    • 2.0 (4)
    • 3.0 (19)
    • 4.0 (28)
    • 5.0 (26)
    • 6.0 (22)
    • 7.0 (2)
    • 8.0 (18)
    • 9.0 (9)
    • 10.0 (7)
    • 11.0 (2)
    • 12.0 (13)
    • 14.0 (5)
    • 16.0 (6)
    • 18.0 (2)
    • 20.0 (2)
    • 24.0 (2)
    Number of Inserts Min받는 사람Number of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 1.25 in(7)
    • 1.26 in(3)
    • 1.5 in(7)
    • 1.575 in(5)
    • 1.969 in(4)
    Head Length [L2] Min받는 사람Head Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 31.75 mm(7)
    • 32.0 mm(3)
    • 38.1 mm(7)
    • 40.0 mm(5)
    • 50.0 mm(4)
    Head Length [L2] Min받는 사람Head Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

    Hardness Scale

    --

    Permitted Groups :

    Group

    SubGroup

    Hardness (HB)

    Hardness (HRC)