환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트

제품 제안

Product Family suggestions

Kennametal 고객 서비스

고객 지원

전 세계 고객 지원 센터의 연락처 정보를 찾아보세요.

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
품목 장바구니에 성공적으로 추가되었습니다
장바구니 보기
품목 are being added to the cart
장바구니 보기

KDM • RD.X10...

필터 선택
필터
필터
    필터 보기 위치
    Metric
    Inch
    keyFilters
    Workpiece Material
    Workpiece Material
    • P Steel (56)
      • P0
        Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
      • P5
        Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(50)
      • P6
        High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(50)
      • P3
        Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(50)
      • P1
        Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(50)
      • P2
        Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(50)
      • P4
        Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(56)
    • M Stainless Steel (50)
      • M3
        Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(50)
      • M2
        High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(50)
      • M1
        Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(50)
    • K Cast Iron (47)
      • K3
        High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(47)
      • K2
        Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(47)
      • K1
        Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(47)
    • N Non-Ferrous Materials (34)
      • N1
        Wrought Aluminum (34)
      • N3
        High-Silicon Aluminum Alloys Si >12.2%(34)
      • N2
        Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(34)
    • S High-Temp Alloys (50)
      • S3
        Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(47)
      • S1
        Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(47)
      • S2
        Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(47)
      • S4
        Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(50)
    • H Hardened Materials (43)
      • H1
        Hardened Materials 44-48 HRC(43)
    Applications
    Applications
    • Face MillingFace Milling (27)
    • PocketPocket (27)
    • Pocket HelicalPocket Helical (27)
    • Pocket MillingPocket Milling (27)
    • Profile MillingProfile Milling (27)
    • RampingRamping (27)
    • Shoulder Ball NoseShoulder Ball Nose (27)
    • Shoulder MillingShoulder Milling (27)
    Cutting Diameter
    Cutting Diameter
    • 0.356 in(3)
    • 0.3937 in(6)
    • 0.5906 in(3)
    • 0.606 in(3)
    • 0.7874 in(1)
    • 0.856 in(2)
    • 0.8661 in(1)
    • 0.9843 in(1)
    • 1.106 in(2)
    • 1.1811 in(1)
    • 1.2598 in(1)
    • 1.5748 in(1)
    • 1.606 in(1)
    • 1.6535 in(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Diameter
    Cutting Diameter
    • 8.9 mm(1)
    • 9.043 mm(2)
    • 10.0 mm(6)
    • 15.0 mm(3)
    • 15.392 mm(3)
    • 20.0 mm(1)
    • 21.742 mm(2)
    • 22.0 mm(1)
    • 25.0 mm(1)
    • 28.092 mm(2)
    • 30.0 mm(1)
    • 32.0 mm(1)
    • 40.0 mm(1)
    • 40.792 mm(1)
    • 42.0 mm(1)
    Cutting Diameter Min받는 사람Cutting Diameter Max
    Cutting Length
    Cutting Length
    • 5.0 mm(27)
    Cutting Length Min받는 사람Cutting Length Max
    Cutting Length
    Cutting Length
    • 0.1968 in(8)
    • 0.1969 in(11)
    • 0.197 in(8)
    Cutting Length Min받는 사람Cutting Length Max
    Reach
    Reach
    • 0.1968 in(1)
    • 1.18 in(1)
    • 1.1811 in(1)
    • 1.375 in(1)
    • 1.378 in(2)
    • 1.5 in(1)
    • 1.5748 in(1)
    • 1.575 in(1)
    • 1.69 in(1)
    • 1.6929 in(1)
    • 1.7717 in(2)
    • 1.9685 in(1)
    • 1.969 in(1)
    • 1.97 in(1)
    • 2.3622 in(4)
    • 2.75 in(1)
    • 2.7559 in(1)
    • 2.7717 in(1)
    • 3.0 in(1)
    • 3.5433 in(1)
    • 4.748 in(1)
    • 4.75 in(1)
    Reach Min받는 사람Reach Max
    Reach
    Reach
    • 5.0 mm(1)
    • 29.972 mm(1)
    • 30.0 mm(1)
    • 34.925 mm(1)
    • 35.0 mm(2)
    • 38.1 mm(1)
    • 40.0 mm(2)
    • 42.926 mm(1)
    • 43.0 mm(1)
    • 45.0 mm(2)
    • 50.0 mm(2)
    • 50.038 mm(1)
    • 60.0 mm(4)
    • 69.85 mm(1)
    • 70.0 mm(1)
    • 70.4 mm(1)
    • 76.2 mm(1)
    • 90.0 mm(1)
    • 120.6 mm(1)
    • 120.65 mm(1)
    Reach Min받는 사람Reach Max
    Tool Cutting Edge Angle
    Tool Cutting Edge Angle
    • 90.0 (27)
    Tool Cutting Edge Angle Min받는 사람Tool Cutting Edge Angle Max
    Connection Style
    Connection Style
    • A-Socket Head Cap Screw (5)
    • Screw-On Connection (9)
    • Straight-Cylindrical (2)
    • Weldon (11)
    Number of Flutes
    Number of Flutes
    • 2 (13)
    • 3 (5)
    • 4 (3)
    • 5 (3)
    • 6 (2)
    • 7 (1)
    Cutting Edges Per Insert
    Cutting Edges Per Insert
    • 0.0 (27)
    • 1.0 (57)
    Cutting Edges Per Insert Min받는 사람Cutting Edges Per Insert Max
    Internal Coolant Capability
    Internal Coolant Capability
    Over All Length [L]
    Over All Length [L]
    • 1.5 in(1)
    • 1.575 in(1)
    • 1.9673 in(1)
    • 1.9685 in(2)
    • 1.969 in(1)
    • 1.97 in(1)
    • 2.2441 in(2)
    • 2.2461 in(1)
    • 2.6547 in(1)
    • 2.6575 in(1)
    • 2.7362 in(2)
    • 4.4094 in(1)
    • 4.7795 in(1)
    • 5.03 in(1)
    • 5.2795 in(1)
    • 5.4331 in(1)
    • 6.2205 in(1)
    • 7.03 in(1)
    • 7.0315 in(2)
    • 7.0866 in(3)
    • 7.874 in(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    Over All Length [L]
    Over All Length [L]
    • 38.1 mm(1)
    • 40.0 mm(1)
    • 49.97 mm(1)
    • 50.0 mm(3)
    • 50.038 mm(1)
    • 57.0 mm(2)
    • 57.05 mm(1)
    • 67.43 mm(1)
    • 67.5 mm(1)
    • 69.5 mm(2)
    • 112.0 mm(1)
    • 121.4 mm(1)
    • 127.762 mm(1)
    • 134.1 mm(1)
    • 138.0 mm(1)
    • 158.0 mm(1)
    • 178.562 mm(1)
    • 178.6 mm(2)
    • 180.0 mm(3)
    • 200.0 mm(1)
    Over All Length [L] Min받는 사람Over All Length [L] Max
    cornerConfiguration
    Corner Radius
    Corner Radius
    • -0.039 in(27)
    • 0.197 in(40)
    • 0.236 in(9)
    • 0.315 in(8)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Radius
    Corner Radius
    • -1.0 mm(27)
    • 5.0 mm(40)
    • 6.0 mm(9)
    • 8.0 mm(8)
    Corner Radius Min받는 사람Corner Radius Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 mm(57)
    • -1.0 mm(27)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    Corner Chamfer
    Corner Chamfer
    • 0.0 in(57)
    • -1.0 in(27)
    Corner Chamfer Min받는 사람Corner Chamfer Max
    application
    Grade Of Cutting Tool
    Grade Of Cutting Tool
    • K110M (28)
    • KC510M (28)
    • KC522M (37)
    • KC725M (37)
    • KCKP10 (32)
    • KCPK30 (30)
    Hand Of Tool
    Hand Of Tool
    • R (27)
    Wiper Insert
    Wiper Insert
    • N (30)
    Maximum Ramp Angle
    Maximum Ramp Angle
    • 3.0 (1)
    • 4.0 (5)
    • 5.0 (2)
    • 5.3 (1)
    • 6.0 (3)
    • 7.0 (1)
    • 9.0 (1)
    • 10.0 (3)
    • 13.5 (2)
    • 15.0 (6)
    • 20.0 (2)
    Maximum Ramp Angle Min받는 사람Maximum Ramp Angle Max
    frontEnd
    Thread TPI
    Thread TPI
    • -1.0 (27)
    Thread TPI Min받는 사람Thread TPI Max
    Thread Pitch
    Thread Pitch
    • -1.0 mm(27)
    Thread Pitch Min받는 사람Thread Pitch Max
    Thread Pitch
    Thread Pitch
    • -1.0 in(27)
    Thread Pitch Min받는 사람Thread Pitch Max
    Neck Diameter
    Neck Diameter
    • 0.689 in(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Neck Diameter
    Neck Diameter
    • 17.5 mm(1)
    Neck Diameter Min받는 사람Neck Diameter Max
    Center Cutting
    Center Cutting
    insertGeometry
    Shape
    Shape
    • R-ROUND (30)
    Insert IC Size
    Insert IC Size
    • 10.0 mm(13)
    • 12.0 mm(9)
    • 16.0 mm(8)
    Insert IC Size Min받는 사람Insert IC Size Max
    Insert IC Size
    Insert IC Size
    • 0.394 in(13)
    • 0.472 in(9)
    • 0.63 in(8)
    Insert IC Size Min받는 사람Insert IC Size Max
    Chip Breaker CBMD
    Chip Breaker CBMD
    • GN (8)
    • HN (9)
    • HP (9)
    • LP (4)
    Cutting Tool Material
    Cutting Tool Material
    • H W (30)
    Tolerance Class
    Tolerance Class
    • H (12)
    • P (18)
    backEnd
    Connection Type
    Connection Type
    • CYLINDRICAL (13)
    • SCREW-ON (9)
    • SHELL MILL (5)
    Back-End Diameter
    Back-End Diameter
    • 12.7 mm(1)
    • 16.0 mm(1)
    • 18.0 mm(2)
    • 19.05 mm(2)
    • 20.0 mm(2)
    • 21.0 mm(3)
    • 22.0 mm(2)
    • 25.0 mm(4)
    • 25.4 mm(3)
    • 29.0 mm(4)
    • 31.75 mm(2)
    • 32.0 mm(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    Back-End Diameter
    Back-End Diameter
    • 0.5 in(1)
    • 0.6299 in(1)
    • 0.7087 in(2)
    • 0.75 in(2)
    • 0.7874 in(2)
    • 0.8268 in(3)
    • 0.8661 in(2)
    • 0.9843 in(4)
    • 1.0 in(3)
    • 1.1417 in(4)
    • 1.25 in(2)
    • 1.2598 in(1)
    Back-End Diameter Min받는 사람Back-End Diameter Max
    other
    Insert Hand
    Insert Hand
    • N (30)
    Number of Inserts
    Number of Inserts
    • 2.0 (13)
    • 3.0 (5)
    • 4.0 (3)
    • 5.0 (3)
    • 6.0 (2)
    • 7.0 (1)
    Number of Inserts Min받는 사람Number of Inserts Max
    Head Length [L2]
    Head Length [L2]
    • 1.18 in(1)
    • 1.1811 in(1)
    • 1.375 in(1)
    • 1.378 in(2)
    • 1.5748 in(1)
    • 1.69 in(1)
    • 1.6929 in(1)
    • 1.7717 in(2)
    • 2.3622 in(1)
    • 2.75 in(1)
    • 2.7559 in(1)
    • 2.7717 in(1)
    • 3.0 in(1)
    • 3.1496 in(1)
    • 3.5433 in(1)
    • 3.937 in(1)
    • 4.7244 in(1)
    • 4.748 in(2)
    • 4.75 in(1)
    Head Length [L2] Min받는 사람Head Length [L2] Max
    Head Length [L2]
    Head Length [L2]
    • 29.972 mm(1)
    • 30.0 mm(1)
    • 34.925 mm(1)
    • 35.0 mm(2)
    • 40.0 mm(1)
    • 42.926 mm(1)
    • 43.0 mm(1)
    • 45.0 mm(2)
    • 60.0 mm(1)
    • 69.85 mm(1)
    • 70.0 mm(1)
    • 70.4 mm(1)
    • 76.2 mm(1)
    • 80.0 mm(1)
    • 90.0 mm(1)
    • 100.0 mm(1)
    • 120.0 mm(1)
    • 120.6 mm(2)
    • 120.65 mm(1)
    Head Length [L2] Min받는 사람Head Length [L2] Max
    Solid Indexable Tool
    Solid Indexable Tool
    No filters matching ""
    KDM • RD.X10...
    KDM • 스크류 온 엔드밀 • RD.X10... • 미터법
    (9)

    KDM • 스크류 온 엔드밀 • RD.X10... • 미터법

    KDM • 쉘밀 • RD.X10... • 미터법
    (3)

    KDM • 쉘밀 • RD.X10... • 미터법

    KDM • Weldon® Shank End Mills • RD.X10... • Inch
    (6)

    KDM • Weldon® Shank End Mills • RD.X10... • Inch

    KDM • Weldon® 섕크 엔드밀 • RD.X10... • 미터법
    (5)

    KDM • Weldon® 섕크 엔드밀 • RD.X10... • 미터법

    KDM • Shell Mills • RD.X10... • Inch
    (2)

    KDM • Shell Mills • RD.X10... • Inch

    KDM • 원통형 섕크 엔드밀 • RD.X10... • 미터법
    (2)

    KDM • 원통형 섕크 엔드밀 • RD.X10... • 미터법

    Round Inserts for KDM • RDHX-LP
    (4)

    Round Inserts for KDM • RDHX-LP

    Round Inserts for KDM • RDHX-GN
    (8)

    Round Inserts for KDM • RDHX-GN

    Round Inserts for KDM • RDPX-HN
    (9)

    Round Inserts for KDM • RDPX-HN

    Round Inserts for KDM • RDPX-HP
    (9)

    Round Inserts for KDM • RDPX-HP

    내 솔루션 페이지에 을(를) 추가하려고 합니다.. 진행하시겠습니까?
    Select the destination where you want to move 받는 사람.
    신제품 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    유효한 이름을 입력하십시오.
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO 카탈로그 번호

    ANSI 카탈로그 번호

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    대시보드 정보를 보려면 로그인해야 합니다.
    Session expired due to inactivity, please login again
    장바구니에 추가하려는 제품()을 사용할 수 없습니다. 고객 서비스에 문의하십시오.
    항목이 장바구니에 추가되었습니다.
    장바구니 보기

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO 카탈로그 번호 등급  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk