환영합니다
기본 설정을 확인해 주십시오
기본 설정 업데이트
제품 제안
Product Family suggestions
- 제품
- /
- 금속가공 공구
- /
- 홀메이킹
- /
- 모듈러 드릴
- /
- KSEM PLUS™ Modular Drill System
- /
- KSEM PLUS™ Heads
KSEM PLUS™ Heads
필터 선택
필터
필터
필터 보기 위치
Metric
Inch
keyFilters
Workpiece Material
Workpiece Material
- P Steel (104)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(104)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(104)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(104)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(104)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(104)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(104)
- M Stainless Steel (104)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(104)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(104)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(104)
- K Cast Iron (104)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(104)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(104)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(104)
- N Non-Ferrous Materials (104)
- N1Wrought Aluminum (104)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(104)
- N3High-Silicon Aluminum Alloys Si >12.2%(104)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (104)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (104)
- N6Carbon, Graphite Composites, CFRP (104)
- N7MMC's (104)
- S High-Temp Alloys (104)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(104)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(104)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(104)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(104)
- H Hardened Materials (97)
- H1Hardened Materials 44-48 HRC(97)
1차 선택 선택
- CN (26)
- DE (26)
- GB (14)
- IN (2)
- SG (2)
- US (19)
Applications
Applications
Drilling (104)
Stacked Plates Drilling (97)
=
Cutting Diameter
Cutting Diameter
- 1.102 in(1)
- 1.125 in(1)
- 1.142 in(1)
- 1.156 in(1)
- 1.181 in(1)
- 1.188 in(1)
- 1.22 in(1)
- 1.25 in(1)
- 1.26 in(1)
- 1.299 in(1)
- 1.307 in(1)
- 1.313 in(1)
- 1.339 in(1)
- 1.375 in(1)
- 1.378 in(1)
- 1.417 in(1)
- 1.438 in(1)
- 1.457 in(1)
- 1.476 in(1)
- 1.496 in(1)
- 1.5 in(1)
- 1.535 in(1)
- 1.543 in(1)
- 1.563 in(1)
- 1.575 in(1)
- 1.614 in(1)
- 1.625 in(1)
- 1.654 in(1)
- 1.693 in(1)
- 1.732 in(1)
- 1.75 in(1)
- 1.772 in(1)
- 1.811 in(1)
- 1.85 in(1)
- 1.875 in(1)
- 1.89 in(1)
- 1.929 in(1)
- 1.969 in(1)
- 2.0 in(1)
- 2.008 in(1)
- 2.047 in(1)
- 2.087 in(1)
- 2.125 in(1)
- 2.126 in(1)
- 2.165 in(1)
- 2.205 in(1)
- 2.244 in(1)
- 2.25 in(1)
- 2.283 in(1)
- 2.323 in(1)
- 2.362 in(1)
- 2.375 in(1)
- 2.402 in(1)
- 2.441 in(1)
- 2.48 in(1)
- 2.5 in(1)
- 2.52 in(1)
- 2.559 in(1)
- 2.598 in(1)
- 2.625 in(1)
- 2.638 in(1)
- 2.677 in(1)
- 2.717 in(1)
- 2.75 in(1)
- 2.756 in(1)
- 2.795 in(2)
- 2.835 in(1)
- 2.874 in(2)
- 2.875 in(2)
- 2.913 in(1)
- 2.953 in(2)
- 2.992 in(1)
- 3.0 in(1)
- 3.071 in(1)
- 3.125 in(2)
- 3.15 in(1)
- 3.189 in(1)
- 3.228 in(1)
- 3.25 in(1)
- 3.307 in(1)
- 3.346 in(1)
- 3.375 in(1)
- 3.386 in(1)
- 3.425 in(1)
- 3.465 in(1)
- 3.5 in(1)
- 3.504 in(1)
- 3.543 in(1)
- 3.622 in(1)
- 3.625 in(1)
- 3.74 in(2)
- 3.75 in(1)
- 3.78 in(1)
- 3.858 in(1)
- 3.898 in(1)
- 3.937 in(2)
- 4.0 in(1)
Cutting Diameter Min값 입력받는 사람Cutting Diameter MaxCutting Diameter
=
Cutting Diameter
Cutting Diameter
- 28.0 mm(1)
- 28.575 mm(1)
- 29.0 mm(1)
- 29.362 mm(1)
- 30.0 mm(1)
- 30.175 mm(1)
- 31.0 mm(1)
- 31.75 mm(1)
- 32.0 mm(1)
- 33.0 mm(1)
- 33.2 mm(1)
- 33.35 mm(1)
- 34.0 mm(1)
- 34.925 mm(1)
- 35.0 mm(1)
- 36.0 mm(1)
- 36.525 mm(1)
- 37.0 mm(1)
- 37.5 mm(1)
- 38.0 mm(1)
- 38.1 mm(1)
- 39.0 mm(1)
- 39.2 mm(1)
- 39.7 mm(1)
- 40.0 mm(1)
- 41.0 mm(1)
- 41.275 mm(1)
- 42.0 mm(1)
- 43.0 mm(1)
- 44.0 mm(1)
- 44.45 mm(1)
- 45.0 mm(1)
- 46.0 mm(1)
- 47.0 mm(1)
- 47.625 mm(1)
- 48.0 mm(1)
- 49.0 mm(1)
- 50.0 mm(1)
- 50.8 mm(1)
- 51.0 mm(1)
- 52.0 mm(1)
- 53.0 mm(1)
- 53.975 mm(1)
- 54.0 mm(1)
- 55.0 mm(1)
- 56.0 mm(1)
- 57.0 mm(1)
- 57.15 mm(1)
- 58.0 mm(1)
- 59.0 mm(1)
- 60.0 mm(1)
- 60.33 mm(1)
- 61.0 mm(1)
- 62.0 mm(1)
- 63.0 mm(1)
- 63.5 mm(1)
- 64.0 mm(1)
- 65.0 mm(1)
- 66.0 mm(1)
- 66.68 mm(1)
- 67.0 mm(1)
- 68.0 mm(1)
- 69.0 mm(1)
- 69.85 mm(1)
- 70.0 mm(1)
- 71.0 mm(2)
- 72.0 mm(1)
- 73.0 mm(2)
- 73.025 mm(2)
- 74.0 mm(1)
- 75.0 mm(2)
- 76.0 mm(1)
- 76.2 mm(1)
- 78.0 mm(1)
- 79.375 mm(2)
- 80.0 mm(1)
- 81.0 mm(1)
- 82.0 mm(1)
- 82.55 mm(1)
- 84.0 mm(1)
- 85.0 mm(1)
- 85.725 mm(1)
- 86.0 mm(1)
- 87.0 mm(1)
- 88.0 mm(1)
- 88.9 mm(1)
- 89.0 mm(1)
- 90.0 mm(1)
- 92.0 mm(1)
- 92.075 mm(1)
- 95.0 mm(2)
- 95.25 mm(1)
- 96.0 mm(1)
- 98.0 mm(1)
- 99.0 mm(1)
- 100.0 mm(2)
- 101.6 mm(1)
Cutting Diameter Min값 입력받는 사람Cutting Diameter MaxCutting Diameter
=
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 25.0 mm(24)
- 30.0 mm(13)
- 35.0 mm(17)
- 40.0 mm(19)
- 45.0 mm(11)
- 50.0 mm(8)
Maximum Hole Depth [L4] Min값 입력받는 사람Maximum Hole Depth [L4] MaxMaximum Hole Depth [L4]
=
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.984 in(24)
- 1.181 in(13)
- 1.378 in(17)
- 1.575 in(19)
- 1.772 in(11)
- 1.968 in(4)
- 1.969 in(4)
Maximum Hole Depth [L4] Min값 입력받는 사람Maximum Hole Depth [L4] MaxMaximum Hole Depth [L4]
=
Reach
Reach
- 0.917 in(9)
- 0.935 in(8)
- 0.943 in(7)
- 1.101 in(6)
- 1.114 in(7)
- 1.272 in(9)
- 1.298 in(8)
- 1.469 in(11)
- 1.491 in(9)
- 1.517 in(4)
- 1.667 in(13)
- 1.703 in(1)
- 1.863 in(3)
- 1.885 in(7)
- 1.911 in(2)
Reach Min값 입력받는 사람Reach MaxReach
=
Reach
Reach
- 23.29 mm(9)
- 23.74 mm(8)
- 23.95 mm(7)
- 27.97 mm(6)
- 28.29 mm(7)
- 32.3 mm(9)
- 32.97 mm(8)
- 37.3 mm(11)
- 37.88 mm(9)
- 38.53 mm(4)
- 42.33 mm(13)
- 43.26 mm(1)
- 47.33 mm(3)
- 47.88 mm(7)
- 48.53 mm(2)
Reach Min값 입력받는 사람Reach MaxReach
=
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (104)
- 2.0 (97)
- 3.0 (7)
Cutting Edges Per Insert Min값 입력받는 사람Cutting Edges Per Insert MaxCutting Edges Per Insert
=
Over All Length [L]
Over All Length [L]
- 1.534 in(1)
- 1.541 in(2)
- 1.548 in(2)
- 1.555 in(2)
- 1.6 in(2)
- 1.607 in(2)
- 1.614 in(2)
- 1.621 in(2)
- 1.649 in(1)
- 1.656 in(2)
- 1.663 in(3)
- 1.67 in(2)
- 1.677 in(1)
- 1.941 in(1)
- 1.948 in(2)
- 1.954 in(1)
- 1.961 in(1)
- 1.968 in(1)
- 1.975 in(1)
- 2.022 in(1)
- 2.029 in(1)
- 2.036 in(1)
- 2.043 in(2)
- 2.05 in(1)
- 2.34 in(1)
- 2.347 in(2)
- 2.354 in(1)
- 2.361 in(1)
- 2.368 in(2)
- 2.375 in(1)
- 2.41 in(1)
- 2.417 in(2)
- 2.424 in(1)
- 2.431 in(1)
- 2.438 in(2)
- 2.445 in(1)
- 2.452 in(1)
- 2.77 in(1)
- 2.776 in(2)
- 2.783 in(1)
- 2.797 in(1)
- 2.818 in(1)
- 3.798 in(1)
- 3.805 in(1)
- 3.812 in(1)
- 3.819 in(1)
- 3.826 in(1)
Over All Length [L] Min값 입력받는 사람Over All Length [L] MaxOver All Length [L]
=
Over All Length [L]
Over All Length [L]
- 38.96 mm(1)
- 39.14 mm(2)
- 39.31 mm(2)
- 39.49 mm(2)
- 40.64 mm(2)
- 40.81 mm(2)
- 40.99 mm(2)
- 41.17 mm(2)
- 41.89 mm(1)
- 42.06 mm(2)
- 42.24 mm(3)
- 42.41 mm(2)
- 42.59 mm(1)
- 49.29 mm(1)
- 49.47 mm(2)
- 49.64 mm(1)
- 49.82 mm(1)
- 49.99 mm(1)
- 50.17 mm(1)
- 51.37 mm(1)
- 51.54 mm(1)
- 51.72 mm(1)
- 51.89 mm(2)
- 52.07 mm(1)
- 59.44 mm(1)
- 59.62 mm(2)
- 59.8 mm(1)
- 59.97 mm(1)
- 60.15 mm(2)
- 60.32 mm(1)
- 61.22 mm(1)
- 61.39 mm(2)
- 61.57 mm(1)
- 61.74 mm(1)
- 61.92 mm(2)
- 62.1 mm(1)
- 62.27 mm(1)
- 70.35 mm(1)
- 70.52 mm(2)
- 70.7 mm(1)
- 71.05 mm(1)
- 71.58 mm(1)
- 96.48 mm(1)
- 96.65 mm(1)
- 96.83 mm(1)
- 97.0 mm(1)
- 97.18 mm(1)
Over All Length [L] Min값 입력받는 사람Over All Length [L] MaxOver All Length [L]
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- KC7140 (104)
- KC7315 (104)
- KC7410 (102)
- KCMS15 (104)
- KCPM45 (104)
- KCU25 (104)
- KCU40 (104)
Drilling Condition Material
Drilling Condition Material
- K1 (104)
- K2 (104)
- K3 (104)
- M1 (104)
- M2 (104)
- M3 (104)
- N1 (104)
- N2 (104)
- N3 (104)
- N4 (104)
- N5 (104)
- N6 (104)
- N7 (104)
- P0 (104)
- P1 (104)
- P2 (104)
- P3 (104)
- P4 (104)
- P5 (104)
- P6 (104)
- S1 (104)
- S2 (104)
- S3 (104)
- S4 (104)
frontEnd
Insert Shape
Insert Shape
- D-DIAMOND/RHOMBIC 90 (97)
- KSEM DRILL (104)
- X-TRIGON 84 (7)
=
Point Angle
Point Angle
- 140.0 (77)
Point Angle Min값 입력받는 사람Point Angle MaxPoint Angle
backEnd
System Size
System Size
- FDS28 (7)
- FDS32 (8)
- FDS36 (9)
- FDS40 (7)
- FDS45 (6)
- FDS50 (8)
- FDS56 (9)
- FDS63 (11)
- FDS71 (13)
- FDS80 (14)
- FDS90 (12)
No filters matching ""
KSEM PLUS™ Heads
