Modular Blades
フィルタ
フィルタ
フィルタ表示
メートルインチ
Workpiece Material
Workpiece Material
- P Steel (111)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(111)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(111)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(111)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(111)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(111)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(111)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(111)
- M Stainless Steel (111)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(111)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(111)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(111)
- K Cast Iron (111)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(111)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(111)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(111)
- N Non-Ferrous Materials (111)
- N1Wrought Aluminum (111)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(111)
- N3High-Silicon Aluminum Alloys Si >12.2%(59)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (111)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (111)
- N6Carbon, Graphite Composites, CFRP (111)
- N7MMC's (59)
- S High-Temp Alloys (111)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(111)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(111)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(111)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(111)
- H Hardened Materials (111)
- H1Hardened Materials 44-48 HRC(111)
- H2Hardened Materials 48-55 HRC(111)
- H3Hardened Materials 56-60 HRC(71)
- H4Hardened Materials >60 HRC(71)
第1選択を選択
- IN (1)
- US (1)
Applications
Applications
Face Grooving (111)
Multiple Direction Cutting (111)
Cutting Condition Material
Cutting Condition Material
- H-All (111)
- K-All (111)
- M-All (111)
- N-All (111)
- P-All (111)
- S-All (111)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (111)
- Lightly Interrupted Cut (111)
- Smooth Cut (111)
Over All Length [L]
Over All Length [L]
- 2.077 in(31)
- 2.155 in(43)
- 2.2687 in(21)
- 2.352 in(14)
to
Over All Length [L]
Over All Length [L]
- 52.746 mm(11)
- 52.75 mm(20)
- 54.75 mm(43)
- 57.6129 mm(2)
- 57.6229 mm(19)
- 59.75 mm(14)
to
Corner Radius
Corner Radius
- 0.008 in(74)
- 0.016 in(85)
- 0.031 in(55)
- 0.039 in(26)
- 0.041 in(20)
- 0.047 in(21)
- 0.048 in(5)
- 0.059 in(30)
- 0.06 in(26)
- 0.063 in(26)
- 0.079 in(19)
- 0.08 in(18)
- 0.094 in(18)
- 0.098 in(15)
- 0.099 in(15)
- 0.118 in(12)
- 0.119 in(12)
- 0.125 in(12)
- 0.156 in(5)
- 0.157 in(5)
- 0.158 in(5)
- 0.188 in(4)
- 0.197 in(4)
- 0.198 in(4)
to
Corner Radius
Corner Radius
- 0.2 mm(74)
- 0.4 mm(85)
- 0.8 mm(55)
- 1.0 mm(26)
- 1.05 mm(20)
- 1.2 mm(21)
- 1.225 mm(5)
- 1.5 mm(30)
- 1.525 mm(26)
- 1.6 mm(26)
- 2.0 mm(19)
- 2.025 mm(18)
- 2.375 mm(18)
- 2.5 mm(15)
- 2.525 mm(15)
- 3.0 mm(12)
- 3.025 mm(12)
- 3.175 mm(12)
- 3.975 mm(5)
- 4.0 mm(5)
- 4.025 mm(5)
- 4.775 mm(4)
- 5.0 mm(4)
- 5.025 mm(4)
to
application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (80)
- KB1630 (71)
- KBH20 (71)
- KC5010 (100)
- KC5025 (100)
- KC9125 (18)
- KCK20 (80)
- KCP10 (100)
- KCP25 (100)
- KCU10 (111)
- KCU10B (111)
- KCU25 (111)
- KCU25B (111)
- KD1405 (59)
- KMS (26)
- KT315 (76)
- KY3500 (76)
- KYS30 (32)
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(2)
- 20.0 mm(4)
- 25.0 mm(5)
- 36.0 mm(5)
- 42.0 mm(5)
- 48.0 mm(3)
- 50.0 mm(3)
- 52.0 mm(3)
- 58.0 mm(4)
- 60.0 mm(4)
- 64.0 mm(4)
- 68.0 mm(4)
- 70.0 mm(4)
- 80.0 mm(7)
- 90.0 mm(6)
- 92.0 mm(3)
- 100.0 mm(4)
- 120.0 mm(8)
- 130.0 mm(4)
- 132.0 mm(4)
- 184.0 mm(3)
- 200.0 mm(8)
- 250.0 mm(6)
- 290.0 mm(8)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.6299 in(2)
- 0.7874 in(4)
- 0.9843 in(5)
- 1.4173 in(5)
- 1.6535 in(5)
- 1.8898 in(3)
- 1.9685 in(3)
- 2.0472 in(3)
- 2.2835 in(4)
- 2.3622 in(4)
- 2.5197 in(4)
- 2.6772 in(4)
- 2.7559 in(4)
- 3.1496 in(7)
- 3.5433 in(6)
- 3.622 in(3)
- 3.937 in(4)
- 4.7244 in(8)
- 5.1181 in(4)
- 5.1969 in(4)
- 7.2441 in(3)
- 7.874 in(8)
- 9.8425 in(6)
- 11.4173 in(8)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.7874 in(2)
- 0.9843 in(4)
- 1.378 in(1)
- 1.4173 in(4)
- 1.811 in(1)
- 1.8898 in(4)
- 2.126 in(2)
- 2.2835 in(3)
- 2.5197 in(3)
- 2.8346 in(3)
- 2.9134 in(3)
- 3.3071 in(4)
- 3.7008 in(4)
- 3.937 in(8)
- 4.4094 in(4)
- 4.8819 in(3)
- 5.3543 in(4)
- 5.9055 in(3)
- 6.2992 in(4)
- 7.874 in(2)
- 8.3465 in(4)
- 10.0 in(4)
- 11.811 in(12)
- 39.3307 in(11)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(2)
- 25.0 mm(4)
- 35.0 mm(1)
- 36.0 mm(4)
- 46.0 mm(1)
- 48.0 mm(4)
- 54.0 mm(2)
- 58.0 mm(3)
- 64.0 mm(3)
- 72.0 mm(3)
- 74.0 mm(3)
- 84.0 mm(4)
- 94.0 mm(4)
- 100.0 mm(8)
- 112.0 mm(4)
- 124.0 mm(3)
- 136.0 mm(4)
- 150.0 mm(3)
- 160.0 mm(4)
- 200.0 mm(2)
- 212.0 mm(4)
- 254.0 mm(4)
- 300.0 mm(12)
- 999.0 mm(11)
to
frontEnd
Cutting Width
Cutting Width
- 0.078 in(20)
- 0.079 in(26)
- 0.084 in(26)
- 0.118 in(30)
- 0.119 in(26)
- 0.12 in(26)
- 0.122 in(26)
- 0.123 in(30)
- 0.125 in(26)
- 0.157 in(19)
- 0.1575 in(18)
- 0.158 in(18)
- 0.161 in(18)
- 0.162 in(19)
- 0.187 in(18)
- 0.1875 in(18)
- 0.197 in(15)
- 0.198 in(15)
- 0.201 in(15)
- 0.202 in(15)
- 0.236 in(12)
- 0.241 in(12)
- 0.25 in(12)
- 0.311 in(5)
- 0.312 in(5)
- 0.313 in(5)
- 0.315 in(5)
- 0.316 in(5)
- 0.32 in(5)
- 0.375 in(4)
- 0.394 in(4)
- 0.399 in(4)
to
Cutting Width
Cutting Width
- 1.99 mm(20)
- 2.0 mm(26)
- 2.13 mm(26)
- 3.0 mm(30)
- 3.05 mm(26)
- 3.1 mm(26)
- 3.11 mm(26)
- 3.12 mm(30)
- 3.13 mm(30)
- 3.175 mm(26)
- 3.18 mm(26)
- 4.0 mm(19)
- 4.1 mm(18)
- 4.11 mm(18)
- 4.12 mm(19)
- 4.76 mm(18)
- 4.762 mm(18)
- 5.0 mm(15)
- 5.1 mm(15)
- 5.12 mm(15)
- 5.13 mm(15)
- 6.0 mm(12)
- 6.12 mm(12)
- 6.13 mm(12)
- 6.35 mm(12)
- 7.937 mm(5)
- 7.938 mm(5)
- 7.94 mm(5)
- 8.0 mm(5)
- 8.12 mm(5)
- 8.13 mm(5)
- 9.525 mm(4)
- 9.53 mm(4)
- 10.0 mm(4)
- 10.13 mm(4)
to
Cartridge Size
Cartridge Size
- 50 (90)
- 65 (21)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.4724 in(26)
- 0.5512 in(49)
- 0.748 in(15)
- 0.9449 in(21)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 12.0 mm(26)
- 14.0 mm(49)
- 19.0 mm(15)
- 24.0 mm(21)
to
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (71)
- B L (71)
- C N (76)
- D P (59)
- H T (76)
- H W (111)
other
Insert Hand
Insert Hand
- L (64)
- N (111)
- R (64)
No filters matching ""
