A4™ Integral Toolholders
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (288)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(288)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(288)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(288)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(288)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(288)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(288)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(288)
- M Stainless Steel (288)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(288)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(288)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(288)
- K Cast Iron (288)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(288)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(288)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(288)
- N Non-Ferrous Materials (288)
- N1Wrought Aluminum (288)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(288)
- N3High-Silicon Aluminum Alloys Si >12.2%(128)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (288)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (288)
- N6Carbon, Graphite Composites, CFRP (288)
- N7MMC's (128)
- S High-Temp Alloys (288)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(288)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(288)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(288)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(288)
- H Hardened Materials (279)
- H1Hardened Materials 44-48 HRC(279)
- H2Hardened Materials 48-55 HRC(279)
- H3Hardened Materials 56-60 HRC(167)
- H4Hardened Materials >60 HRC(167)
Select First Choice
- BR (8)
- CN (60)
- DE (60)
- GB (29)
- IN (2)
- SG (14)
- US (98)
Applications
Applications
Chamfer Turning (69)
Cut-Off (92)
Deep Grooving (69)
Face Grooving (99)
Facing (69)
Grooving (199)
Multiple Direction Cutting (277)
Profiling (199)
Turning (199)
Cutting Condition Material
Cutting Condition Material
- H-All (279)
- K-All (279)
- M-All (288)
- N-All (288)
- P-All (288)
- S-All (288)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (288)
- Lightly Interrupted Cut (288)
- Smooth Cut (288)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (263)
- 92.25 (25)
to
Connection Style
Connection Style
- Boring Bar Shank (11)
- Toolholder (158)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (129)
- 2.0 (221)
to
Over All Length [L]
Over All Length [L]
- 2.077 in(23)
- 2.155 in(24)
- 2.2687 in(12)
- 2.352 in(8)
- 4.5 in(23)
- 4.9213 in(54)
- 4.9234 in(1)
- 4.9331 in(12)
- 4.934 in(2)
- 5.0 in(20)
- 5.9055 in(34)
- 5.9173 in(5)
- 5.918 in(2)
- 6.0 in(46)
- 6.6929 in(10)
- 7.0 in(1)
- 7.9311 in(7)
- 8.0118 in(4)
to
Over All Length [L]
Over All Length [L]
- 52.746 mm(11)
- 52.75 mm(12)
- 54.75 mm(24)
- 57.6129 mm(2)
- 57.6229 mm(10)
- 59.75 mm(8)
- 114.3 mm(23)
- 125.0 mm(57)
- 125.3 mm(12)
- 127.0 mm(20)
- 150.0 mm(36)
- 150.3 mm(5)
- 152.4 mm(46)
- 170.0 mm(10)
- 177.8 mm(1)
- 201.45 mm(7)
- 203.5 mm(4)
to
Corner Radius
Corner Radius
- 0.006 in(9)
- 0.008 in(178)
- 0.016 in(206)
- 0.031 in(141)
- 0.039 in(73)
- 0.041 in(56)
- 0.047 in(62)
- 0.048 in(17)
- 0.059 in(65)
- 0.06 in(53)
- 0.063 in(53)
- 0.079 in(42)
- 0.08 in(40)
- 0.094 in(40)
- 0.098 in(37)
- 0.099 in(35)
- 0.118 in(39)
- 0.119 in(39)
- 0.125 in(39)
- 0.156 in(17)
- 0.157 in(17)
- 0.158 in(17)
- 0.188 in(6)
- 0.197 in(6)
- 0.198 in(6)
to
Corner Radius
Corner Radius
- 0.15 mm(9)
- 0.2 mm(178)
- 0.4 mm(206)
- 0.8 mm(141)
- 1.0 mm(73)
- 1.05 mm(56)
- 1.2 mm(62)
- 1.225 mm(17)
- 1.5 mm(65)
- 1.525 mm(53)
- 1.6 mm(53)
- 2.0 mm(42)
- 2.025 mm(40)
- 2.375 mm(40)
- 2.5 mm(37)
- 2.525 mm(35)
- 3.0 mm(39)
- 3.025 mm(39)
- 3.175 mm(39)
- 3.975 mm(17)
- 4.0 mm(17)
- 4.025 mm(17)
- 4.775 mm(6)
- 5.0 mm(6)
- 5.025 mm(6)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(67)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(67)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (190)
- KB1630 (167)
- KBH20 (167)
- KC5010 (246)
- KC5025 (255)
- KC9125 (40)
- KCK20 (190)
- KCP10 (246)
- KCP25 (246)
- KCU10 (279)
- KCU10B (279)
- KCU25 (288)
- KCU25B (288)
- KD1405 (128)
- KMS (53)
- KT315 (188)
- KY3500 (184)
- KYS30 (91)
Hand Of Tool
Hand Of Tool
- L (94)
- N (10)
- R (117)
Wiper Insert
Wiper Insert
- N (221)
F Dimension
F Dimension
- 8.17 mm(1)
- 8.23 mm(2)
- 9.76 mm(1)
- 10.23 mm(1)
- 10.24 mm(1)
- 12.1 mm(2)
- 12.17 mm(2)
- 12.22 mm(1)
- 12.73 mm(3)
- 12.74 mm(2)
- 12.79 mm(2)
- 12.85 mm(2)
- 13.03 mm(2)
- 15.92 mm(1)
- 15.97 mm(4)
- 16.02 mm(1)
- 16.1 mm(1)
- 16.2 mm(5)
- 16.22 mm(2)
- 19.03 mm(1)
- 19.08 mm(3)
- 19.084 mm(5)
- 19.101 mm(1)
- 19.134 mm(6)
- 19.234 mm(3)
- 19.253 mm(2)
- 20.06 mm(6)
- 20.1 mm(2)
- 20.11 mm(14)
- 20.19 mm(7)
- 20.2 mm(13)
- 20.21 mm(2)
- 20.3 mm(2)
- 25.06 mm(4)
- 25.11 mm(8)
- 25.19 mm(1)
- 25.2 mm(6)
- 25.21 mm(4)
- 25.3 mm(2)
- 25.335 mm(2)
- 25.4 mm(1)
- 25.43 mm(4)
- 25.484 mm(5)
- 25.485 mm(2)
- 25.499 mm(1)
- 25.578 mm(1)
- 25.584 mm(3)
- 25.71 mm(3)
- 27.9 mm(1)
- 30.4 mm(1)
- 30.8 mm(1)
- 33.1 mm(1)
- 35.1 mm(1)
- 35.4 mm(1)
- 38.9 mm(1)
- 39.1 mm(2)
to
F Dimension
F Dimension
- 0.3217 in(1)
- 0.324 in(2)
- 0.3843 in(1)
- 0.4028 in(1)
- 0.4031 in(1)
- 0.4764 in(2)
- 0.4791 in(2)
- 0.4811 in(1)
- 0.5012 in(3)
- 0.5016 in(2)
- 0.5035 in(2)
- 0.5059 in(2)
- 0.513 in(2)
- 0.6268 in(1)
- 0.6287 in(4)
- 0.63 in(1)
- 0.6307 in(1)
- 0.637 in(1)
- 0.6378 in(4)
- 0.6386 in(2)
- 0.7492 in(1)
- 0.7512 in(3)
- 0.7513 in(5)
- 0.752 in(1)
- 0.7533 in(6)
- 0.7572 in(3)
- 0.758 in(2)
- 0.7898 in(6)
- 0.7913 in(2)
- 0.7917 in(14)
- 0.7949 in(7)
- 0.7953 in(13)
- 0.7957 in(2)
- 0.7992 in(2)
- 0.9866 in(4)
- 0.9886 in(8)
- 0.9917 in(1)
- 0.9921 in(6)
- 0.9925 in(4)
- 0.9961 in(2)
- 0.9974 in(2)
- 1.0 in(1)
- 1.0012 in(4)
- 1.0033 in(7)
- 1.0039 in(1)
- 1.007 in(1)
- 1.0072 in(3)
- 1.0122 in(3)
- 1.0984 in(1)
- 1.1969 in(1)
- 1.2126 in(1)
- 1.3031 in(1)
- 1.3819 in(1)
- 1.3937 in(1)
- 1.5315 in(1)
- 1.5394 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(4)
- 17.0 mm(3)
- 19.99 mm(1)
- 20.0 mm(5)
- 21.0 mm(3)
- 24.994 mm(1)
- 25.0 mm(9)
- 26.0 mm(5)
- 28.0 mm(1)
- 36.0 mm(3)
- 37.998 mm(1)
- 42.0 mm(4)
- 48.0 mm(2)
- 50.0 mm(2)
- 52.0 mm(2)
- 58.0 mm(2)
- 60.0 mm(2)
- 64.0 mm(2)
- 68.0 mm(2)
- 70.0 mm(5)
- 80.0 mm(4)
- 90.0 mm(6)
- 92.0 mm(2)
- 100.0 mm(2)
- 120.0 mm(9)
- 130.0 mm(2)
- 132.0 mm(2)
- 184.0 mm(2)
- 200.0 mm(4)
- 250.0 mm(3)
- 290.0 mm(4)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.6299 in(4)
- 0.6693 in(3)
- 0.787 in(1)
- 0.7874 in(5)
- 0.8268 in(3)
- 0.984 in(1)
- 0.9843 in(9)
- 1.0236 in(5)
- 1.1024 in(1)
- 1.4173 in(3)
- 1.496 in(1)
- 1.6535 in(4)
- 1.8898 in(2)
- 1.9685 in(2)
- 2.0472 in(2)
- 2.2835 in(2)
- 2.3622 in(2)
- 2.5197 in(2)
- 2.6772 in(2)
- 2.7559 in(5)
- 3.1496 in(4)
- 3.5433 in(6)
- 3.622 in(2)
- 3.937 in(2)
- 4.7244 in(9)
- 5.1181 in(2)
- 5.1969 in(2)
- 7.2441 in(2)
- 7.874 in(4)
- 9.8425 in(3)
- 11.4173 in(4)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.7874 in(4)
- 0.8268 in(3)
- 0.9055 in(1)
- 0.984 in(1)
- 0.9843 in(5)
- 1.0236 in(2)
- 1.063 in(9)
- 1.102 in(4)
- 1.1024 in(3)
- 1.3386 in(4)
- 1.339 in(3)
- 1.378 in(2)
- 1.417 in(1)
- 1.4173 in(12)
- 1.4961 in(1)
- 1.811 in(1)
- 1.8898 in(2)
- 2.126 in(2)
- 2.2835 in(3)
- 2.5197 in(2)
- 2.8346 in(2)
- 2.9134 in(2)
- 3.3071 in(2)
- 3.7008 in(2)
- 3.937 in(4)
- 4.4094 in(2)
- 4.8819 in(2)
- 5.3543 in(2)
- 5.9055 in(2)
- 6.2992 in(2)
- 7.874 in(2)
- 8.3465 in(2)
- 10.0 in(2)
- 11.811 in(6)
- 39.3307 in(6)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(4)
- 21.0 mm(3)
- 23.0 mm(1)
- 24.994 mm(1)
- 25.0 mm(5)
- 26.0 mm(2)
- 27.0 mm(9)
- 28.0 mm(7)
- 34.0 mm(7)
- 35.0 mm(2)
- 35.992 mm(1)
- 36.0 mm(12)
- 38.0 mm(1)
- 46.0 mm(1)
- 48.0 mm(2)
- 54.0 mm(2)
- 58.0 mm(2)
- 58.001 mm(1)
- 64.0 mm(2)
- 72.0 mm(2)
- 74.0 mm(2)
- 84.0 mm(2)
- 94.0 mm(2)
- 100.0 mm(4)
- 112.0 mm(2)
- 124.0 mm(2)
- 136.0 mm(2)
- 150.0 mm(2)
- 160.0 mm(2)
- 200.0 mm(2)
- 212.0 mm(2)
- 254.0 mm(2)
- 300.0 mm(6)
- 999.0 mm(6)
to
Cutting Direction
Cutting Direction
- E (211)
- S (10)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (28)
- POSITIVE-ZERO (146)
Maximum Bore Depth
Maximum Bore Depth
- 2.5 in(1)
- 2.5196 in(2)
- 3.0 in(1)
- 3.1496 in(2)
- 3.9372 in(3)
- 4.0 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 63.5 mm(1)
- 64.0 mm(2)
- 76.2 mm(1)
- 80.0 mm(2)
- 100.0 mm(3)
- 101.6 mm(2)
to
Boring Bar Material
Boring Bar Material
- S (11)
Front-End
Cutting Width
Cutting Width
- 0.059 in(9)
- 0.078 in(56)
- 0.079 in(73)
- 0.084 in(73)
- 0.118 in(65)
- 0.119 in(53)
- 0.12 in(53)
- 0.122 in(53)
- 0.123 in(65)
- 0.125 in(53)
- 0.157 in(42)
- 0.1575 in(40)
- 0.158 in(40)
- 0.161 in(40)
- 0.162 in(42)
- 0.187 in(40)
- 0.1875 in(40)
- 0.197 in(37)
- 0.198 in(35)
- 0.201 in(35)
- 0.202 in(37)
- 0.236 in(39)
- 0.241 in(39)
- 0.25 in(39)
- 0.311 in(17)
- 0.312 in(17)
- 0.313 in(17)
- 0.315 in(17)
- 0.316 in(17)
- 0.32 in(17)
- 0.375 in(6)
- 0.394 in(6)
- 0.399 in(6)
to
Cutting Width
Cutting Width
- 1.49 mm(9)
- 1.5 mm(9)
- 1.99 mm(56)
- 2.0 mm(73)
- 2.13 mm(73)
- 3.0 mm(65)
- 3.05 mm(53)
- 3.1 mm(53)
- 3.11 mm(53)
- 3.12 mm(65)
- 3.13 mm(65)
- 3.175 mm(53)
- 3.18 mm(53)
- 4.0 mm(42)
- 4.1 mm(40)
- 4.11 mm(40)
- 4.12 mm(42)
- 4.76 mm(40)
- 4.762 mm(40)
- 5.0 mm(37)
- 5.1 mm(35)
- 5.12 mm(37)
- 5.13 mm(37)
- 6.0 mm(39)
- 6.12 mm(39)
- 6.13 mm(39)
- 6.35 mm(39)
- 7.937 mm(17)
- 7.938 mm(17)
- 7.94 mm(17)
- 8.0 mm(17)
- 8.12 mm(17)
- 8.13 mm(17)
- 9.525 mm(6)
- 9.53 mm(6)
- 10.0 mm(6)
- 10.13 mm(6)
to
Cartridge Size
Cartridge Size
- 50 (55)
- 65 (12)
Insert Size
Insert Size
- 10 (4)
- 2 (36)
- 2S (11)
- 3 (33)
- 3S (8)
- 4 (30)
- 4S (1)
- 5 (27)
- 5S (2)
- 6 (32)
- 8 (14)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 in(29)
- 0.1969 in(3)
- 0.2756 in(2)
- 0.315 in(10)
- 0.3543 in(1)
- 0.3937 in(6)
- 0.4331 in(4)
- 0.4724 in(29)
- 0.5315 in(9)
- 0.55 in(1)
- 0.551 in(4)
- 0.5512 in(68)
- 0.5709 in(4)
- 0.6693 in(41)
- 0.689 in(3)
- 0.748 in(16)
- 0.7874 in(22)
- 0.8661 in(4)
- 0.9449 in(20)
- 1.0236 in(12)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(29)
- 5.0 mm(3)
- 7.0 mm(2)
- 8.0 mm(9)
- 8.001 mm(1)
- 9.0 mm(1)
- 10.0 mm(6)
- 11.0 mm(4)
- 12.0 mm(29)
- 13.5 mm(9)
- 13.995 mm(2)
- 14.0 mm(71)
- 14.5 mm(4)
- 17.0 mm(41)
- 17.5 mm(3)
- 18.999 mm(1)
- 19.0 mm(15)
- 20.0 mm(22)
- 22.0 mm(4)
- 24.0 mm(20)
- 25.999 mm(6)
- 26.0 mm(6)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 1.1024 in(1)
- 2.7559 in(3)
- 3.5433 in(2)
- 4.7244 in(5)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 28.0 mm(1)
- 70.0 mm(3)
- 90.0 mm(2)
- 120.0 mm(5)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 38.0 mm(1)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 1.4961 in(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (167)
- B L (167)
- C N (184)
- D P (128)
- H T (188)
- H W (288)
Back-End
Connection Type
Connection Type
- BORING BAR (11)
- SQUARE SHANK (210)
Back-End Diameter
Back-End Diameter
- 15.875 mm(1)
- 16.0 mm(2)
- 19.05 mm(1)
- 20.0 mm(2)
- 25.0 mm(3)
- 25.4 mm(2)
to
Shank Height
Shank Height
- 0.4724 in(5)
- 0.5 in(6)
- 0.625 in(9)
- 0.628 in(1)
- 0.6299 in(7)
- 0.63 in(1)
- 0.75 in(29)
- 0.7874 in(55)
- 0.9843 in(41)
- 1.0 in(36)
- 1.25 in(9)
- 1.2598 in(10)
- 1.5 in(1)
to
Shank Height
Shank Height
- 12.0 mm(5)
- 12.7 mm(6)
- 15.875 mm(9)
- 16.0 mm(9)
- 19.05 mm(29)
- 20.0 mm(55)
- 25.0 mm(41)
- 25.4 mm(36)
- 31.75 mm(9)
- 32.0 mm(10)
- 38.1 mm(1)
to
Shank Width
Shank Width
- 0.4724 in(5)
- 0.5 in(6)
- 0.624 in(1)
- 0.625 in(9)
- 0.628 in(1)
- 0.6299 in(8)
- 0.743 in(1)
- 0.75 in(28)
- 0.7874 in(54)
- 0.9843 in(51)
- 1.0 in(36)
- 1.25 in(9)
- 1.5 in(1)
to
Shank Width
Shank Width
- 12.0 mm(5)
- 12.7 mm(6)
- 15.875 mm(9)
- 16.0 mm(10)
- 18.86 mm(1)
- 19.05 mm(28)
- 20.0 mm(54)
- 25.0 mm(51)
- 25.4 mm(36)
- 31.75 mm(9)
- 38.1 mm(1)
to
Other
Insert Hand
Insert Hand
- L (158)
- N (288)
- R (158)
No filters matching ""
