KM63XMZ™ Tools, Tool Holders & Adapters For Sale - Kennametal®
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (25)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(25)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(25)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(25)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(25)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(25)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(25)
- M Stainless Steel (25)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(25)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(25)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(25)
- K Cast Iron (25)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(25)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(25)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(25)
- N Non-Ferrous Materials (25)
- N1Wrought Aluminum (25)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(25)
- N3High-Silicon Aluminum Alloys Si >12.2%(18)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (25)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (25)
- N6Carbon, Graphite Composites, CFRP (25)
- N7MMC's (23)
- S High-Temp Alloys (25)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(25)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(25)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(25)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(25)
- H Hardened Materials (23)
- H1Hardened Materials 44-48 HRC(23)
- H2Hardened Materials 48-55 HRC(23)
- H3Hardened Materials 56-60 HRC(23)
- H4Hardened Materials >60 HRC(23)
- C CFRP Materials (25)
- C1CFRP, CFRP / CFRP (25)
- C2CFRP / Aluminium CFRP / Non-Ferrous (23)
Applications
Applications
Cut-Off (3)
Deep Grooving (3)
Facing (20)
Grooving (3)
Multiple Direction Cutting (24)
Profiling (28)
TRN Boring (16)
Turning (25)
Cutting Condition Material
Cutting Condition Material
- H-All (23)
- K-All (25)
- K1 (9)
- M-All (25)
- N-All (25)
- P-All (25)
- S-All (25)
- S2 (22)
- S4 (16)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (25)
- Lightly Interrupted Cut (25)
- Smooth Cut (25)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 48.0 (6)
- 49.783 (1)
- 50.0 (2)
- 93.0 (8)
- 95.0 (8)
to
Connection Style
Connection Style
- KM (5)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (21)
- 2.0 (23)
- 3.0 (2)
- 4.0 (22)
- 6.0 (2)
- 8.0 (9)
to
Over All Length [L]
Over All Length [L]
- 2.362 in(7)
- 2.3622 in(5)
- 4.528 in(9)
- 4.9213 in(4)
to
Over All Length [L]
Over All Length [L]
- 60.0 mm(12)
- 115.0 mm(9)
- 125.0 mm(4)
to
Corner Radius
Corner Radius
- 0.002 in(1)
- 0.004 in(21)
- 0.008 in(20)
- 0.014 in(3)
- 0.016 in(25)
- 0.024 in(2)
- 0.031 in(25)
- 0.047 in(25)
- 0.063 in(18)
- 0.094 in(2)
to
Corner Radius
Corner Radius
- 0.05 mm(1)
- 0.1 mm(21)
- 0.2 mm(20)
- 0.35 mm(3)
- 0.4 mm(25)
- 0.6 mm(2)
- 0.8 mm(25)
- 1.2 mm(25)
- 1.6 mm(18)
- 2.375 mm(2)
- 2.4 mm(2)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (20)
- CW5025 (14)
- K060 (7)
- K313 (23)
- K68 (21)
- KB1340 (9)
- KB1345 (11)
- KB1610 (17)
- KB1630 (15)
- KB5610 (15)
- KB5630 (16)
- KBH10 (21)
- KBH10B (18)
- KBH20 (21)
- KBH20B (18)
- KBK35 (6)
- KC5010 (25)
- KC5025 (25)
- KC5410 (23)
- KC730 (20)
- KC850 (23)
- KCK05 (25)
- KCK05B (10)
- KCK15 (25)
- KCK15B (25)
- KCK20 (25)
- KCK20B (25)
- KCM15 (25)
- KCM15B (25)
- KCM25 (25)
- KCM25B (25)
- KCM35 (23)
- KCM35B (14)
- KCP05 (23)
- KCP05B (23)
- KCP10 (25)
- KCP10B (25)
- KCP15 (1)
- KCP25 (25)
- KCP25B (25)
- KCP25C (25)
- KCP30 (25)
- KCP30B (15)
- KCP40 (18)
- KCP40B (23)
- KCPK05 (24)
- KCS10 (8)
- KCS10B (25)
- KCU10 (25)
- KCU10B (25)
- KCU25 (25)
- KCU25B (25)
- KD1400 (16)
- KD1405 (16)
- KD1425 (18)
- KS15 (7)
- KT315 (23)
- KT325 (8)
- KTP10 (23)
- KTP25S (21)
- KY1540 (7)
- KY1615 (4)
- KY3500 (22)
- KY4300 (13)
- KY4400 (22)
- KYHK15B (22)
- KYK10 (11)
- KYK25 (15)
- KYS25 (7)
- KYS30 (13)
- PB100 (7)
- SP4019 (7)
- THM (8)
- THM-X (10)
- THMF-X (7)
- TN10P (23)
- TN10U (21)
- TN15M (17)
- TN15U (16)
- TN2000 (13)
- TN20K (23)
- TN20P (25)
- TN30M (17)
- TN30P (14)
- TN4000 (13)
- TN6010 (10)
- TTS (7)
- WBH10P (16)
- WBH10U (7)
- WBH20P (20)
- WBH30P (16)
- WBK45U (4)
- WDN00U (11)
- WDN25U (18)
- WK05CT (24)
- WK15CT (13)
- WK20CT (25)
- WM15CT (25)
- WM25CT (25)
- WM35CT (20)
- WP05CT (9)
- WP15CT (25)
- WP25CT (25)
- WP35CT (23)
- WS10PT (24)
- WS25PT (24)
- WU10HT (25)
- WU10PT (19)
- WU25PT (19)
- X00580 (7)
- X00581 (7)
- X00582 (7)
- X00583 (7)
- X00584 (7)
- X00585 (7)
- X00586 (7)
- X00591 (7)
- X00592 (7)
- X00593 (7)
- X00594 (7)
- X00596 (7)
- X00597 (7)
- X00599 (7)
Hand Of Tool
Hand Of Tool
- L (2)
- R (3)
Wiper Insert
Wiper Insert
- N (25)
- Y (11)
F Dimension
F Dimension
- 43.0 mm(5)
to
F Dimension
F Dimension
- 1.6929 in(5)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 32.0 mm(4)
- 86.0 mm(7)
- 100.0 mm(9)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 1.2598 in(4)
- 3.386 in(7)
- 3.937 in(9)
to
Cutting Direction
Cutting Direction
- S (5)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (5)
Maximum Bore Depth
Maximum Bore Depth
- 2.362 in(7)
- 3.445 in(4)
- 4.528 in(9)
to
Maximum Bore Depth
Maximum Bore Depth
- 60.0 mm(7)
- 87.5 mm(4)
- 115.0 mm(9)
to
Front-End
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (5)
- CARTRIDGE MOUNT (9)
- COMBI SHELL ADAPTER (10)
- CUTOFF SUPPORT BLADE (4)
- DRILL CHUCK ADAPTER (2)
- END MILL ADAPTER (25)
- ER COLLET CHUCK (9)
- EXTENSION (2)
- HYDRAULIC CHUCK (4)
- HYDRAULIC CHUCK-HIGH TORQUE (2)
- HYDRAULIC CHUCK-SLIM LINE (7)
- KM MODULAR ADAPTER (6)
- KM MODULAR ADAPTER-4 UNITS (1)
- REDUCER (22)
- SHELL MILL ADAPTER (11)
- SHRINK FIT ADAPTER (17)
- SQUARE SHANK ADAPTER (15)
- SQUARE SHANK ADAPTER-2 SLOTS (2)
- SQUARE SHANK ADAPTER-4 SLOTS (1)
- WHISTLE NOTCH ADAPTER (10)
Clamp Style
Clamp Style
- M (17)
- P (7)
- S (1)
Front End Type
Front End Type
- FDA - Milling Cutter Arbor (21)
- KMS - KM TBD System (1)
- KMT - KM Adapter (16)
- MCS - Modular Cartridge System (9)
- PMK - Prismatic Adapter Kenna (4)
- SZK - Collet Taper (9)
- VKT - Square Shank (18)
- ZYL - Cylindrical Adapter (86)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (9)
- D-DIAMOND/RHOMBIC 55 (9)
- V-DIAMOND/RHOMBIC 35 (5)
- W-TRIGON 80 (2)
Front End Style
Front End Style
- FDA03 Longit &Transver Drive (1)
- FDA13 Long&TranDrv&CutRetScr (5)
- FDA22 Transv Drive & SHCS (11)
- FDA23 Longit&Transv Drv&SHCS (4)
- KMS-01 Std KM-TBD NotOnCntr (1)
- KMT00 All KM, except 02,05,09 (16)
- MCS01 Modular Deep Grooving (9)
- PMK02 Cutoff Sup Bld A1-A3 (4)
- SZK02 Collets 8 Degree Taper (9)
- VKT01 Std Design (18)
- ZYL01 Straight Shank (32)
- ZYL10 Weldon Shank (15)
- ZYL13 2Deg-Whistle Notch (10)
- ZYL14 Weldon+Whistle Notch (10)
- ZYL22 Boring Bar Shank (19)
Gage Length
Gage Length
- 23.0000 in(2)
- 23.4000 in(2)
- 25.0000 in(4)
- 26.0000 in(3)
- 28.0000 in(2)
- 28.2860 in(2)
- 30.0000 in(14)
- 32.0000 in(3)
- 35.1820 in(2)
- 35.2500 in(2)
- 38.1000 in(1)
- 38.8990 in(2)
- 40.0000 in(4)
- 43.0000 in(1)
- 44.9600 in(1)
- 47.0000 in(2)
- 55.0000 in(2)
- 58.4000 in(1)
- 58.5000 in(3)
- 60.0000 in(9)
- 63.0000 in(4)
- 63.5000 in(4)
- 65.0000 in(4)
- 70.0000 in(2)
- 75.0000 in(3)
- 77.6000 in(1)
- 78.0000 in(2)
- 80.0000 in(20)
- 85.0000 in(5)
- 88.9000 in(1)
- 90.0000 in(7)
- 95.0000 in(3)
- 99.5500 in(1)
- 99.8000 in(1)
- 100.0000 in(11)
- 103.7000 in(1)
- 104.6000 in(2)
- 105.0000 in(2)
- 110.0000 in(4)
- 115.0000 in(1)
- 115.1000 in(1)
- 120.0000 in(7)
- 123.8000 in(2)
- 125.0000 in(1)
- 130.0000 in(1)
- 160.0000 in(3)
- 170.0000 in(4)
- 234.5500 in(1)
- 310.7100 in(1)
- 361.5200 in(1)
- 386.9200 in(1)
- 412.3200 in(1)
- 513.9200 in(1)
Gage Length
Gage Length
- 23.0000 mm(2)
- 23.4000 mm(2)
- 25.0000 mm(4)
- 26.0000 mm(3)
- 28.0000 mm(2)
- 28.2860 mm(2)
- 30.0000 mm(14)
- 32.0000 mm(3)
- 35.1820 mm(2)
- 35.2500 mm(2)
- 38.1000 mm(1)
- 38.8990 mm(2)
- 40.0000 mm(4)
- 43.0000 mm(1)
- 44.9600 mm(1)
- 47.0000 mm(2)
- 55.0000 mm(2)
- 58.4000 mm(1)
- 58.5000 mm(3)
- 60.0000 mm(9)
- 63.0000 mm(4)
- 63.5000 mm(4)
- 65.0000 mm(4)
- 70.0000 mm(2)
- 75.0000 mm(3)
- 77.6000 mm(1)
- 78.0000 mm(2)
- 80.0000 mm(20)
- 85.0000 mm(5)
- 88.9000 mm(1)
- 90.0000 mm(7)
- 95.0000 mm(3)
- 99.5500 mm(1)
- 99.8000 mm(1)
- 100.0000 mm(11)
- 103.7000 mm(1)
- 104.6000 mm(2)
- 105.0000 mm(2)
- 110.0000 mm(4)
- 115.0000 mm(1)
- 115.1000 mm(1)
- 120.0000 mm(7)
- 123.8000 mm(2)
- 125.0000 mm(1)
- 130.0000 mm(1)
- 160.0000 mm(3)
- 170.0000 mm(4)
- 234.5500 mm(1)
- 310.7100 mm(1)
- 361.5200 mm(1)
- 386.9200 mm(1)
- 412.3200 mm(1)
- 513.9200 mm(1)
Front End Size
Front End Size
- 0.5 in(1)
- 3.0 in(1)
- 6.0 in(5)
- 6.35 in(1)
- 7.938 in(2)
- 8.0 in(6)
- 9.525 in(2)
- 10.0 in(6)
- 12.0 in(6)
- 12.7 in(4)
- 14.0 in(4)
- 15.875 in(3)
- 16.0 in(8)
- 18.0 in(2)
- 19.05 in(6)
- 20.0 in(7)
- 22.0 in(4)
- 25.0 in(5)
- 25.4 in(5)
- 27.0 in(4)
- 31.75 in(7)
- 32.0 in(13)
- 38.1 in(2)
- 40.0 in(10)
- 50.0 in(5)
- 50.8 in(2)
- 63.0 in(2)
to
Front End Size
Front End Size
- 0.5 mm(1)
- 3.0 mm(1)
- 6.0 mm(5)
- 6.35 mm(1)
- 7.938 mm(2)
- 8.0 mm(6)
- 9.525 mm(2)
- 10.0 mm(6)
- 12.0 mm(6)
- 12.7 mm(4)
- 14.0 mm(4)
- 15.875 mm(3)
- 16.0 mm(8)
- 18.0 mm(2)
- 19.05 mm(6)
- 20.0 mm(7)
- 22.0 mm(4)
- 25.0 mm(5)
- 25.4 mm(5)
- 27.0 mm(4)
- 31.75 mm(7)
- 32.0 mm(13)
- 38.1 mm(2)
- 40.0 mm(10)
- 50.0 mm(5)
- 50.8 mm(2)
- 63.0 mm(2)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (20)
- B L (21)
- C A (22)
- C N (22)
- D P (21)
- H T (23)
- H W (25)
Back-End
Connection Type
Connection Type
- TAPER SHANK (5)
System Size
System Size
- KM63XMZ (157)
Back-End Diameter
Back-End Diameter
- 38.1 mm(7)
- 40.0 mm(7)
- 63.0 mm(177)
to
Back-End Diameter
Back-End Diameter
- 1.5 in(7)
- 1.5748 in(7)
- 2.478 in(13)
- 2.48 in(6)
- 2.4803 in(133)
to
Other
Insert Hand
Insert Hand
- N (25)
- R (1)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
