KM4X100™
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (49)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(49)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(49)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(49)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(49)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(49)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(49)
- M Stainless Steel (47)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(47)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(47)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(47)
- K Cast Iron (49)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(49)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(49)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(49)
- N Non-Ferrous Materials (39)
- N1Wrought Aluminum (39)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(38)
- N3High-Silicon Aluminum Alloys Si >12.2%(10)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (39)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (38)
- N6Carbon, Graphite Composites, CFRP (38)
- N7MMC's (35)
- S High-Temp Alloys (42)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(42)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(42)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(42)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(42)
- H Hardened Materials (28)
- H1Hardened Materials 44-48 HRC(28)
- H2Hardened Materials 48-55 HRC(28)
- H3Hardened Materials 56-60 HRC(26)
- H4Hardened Materials >60 HRC(16)
- C CFRP Materials (31)
- C1CFRP, CFRP / CFRP (31)
- C2CFRP / Aluminium CFRP / Non-Ferrous (29)
Applications
Applications
Chamfer Turning (13)
Deep Grooving (8)
Facing (43)
Grooving (8)
ID Facing (25)
ID Grooving (8)
ID Thread Turning (8)
Multiple Direction Cutting (44)
OD Thread Turning (8)
Plunge Turning (11)
Profiling (30)
TRN Boring (33)
Turning (44)
Cutting Condition Material
Cutting Condition Material
- H-All (28)
- K-All (46)
- K1 (2)
- M-All (36)
- N-All (34)
- P-All (48)
- S-All (37)
- S2 (22)
- S4 (4)
Type of Thread
Type of Thread
- 60 (4)
- ACME (6)
- API (4)
- API RD (3)
- BSW (2)
- BUTTRESS (4)
- M (1)
- NPT (2)
- STUB ACME (2)
- UN (4)
- UNJ (2)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (44)
- Lightly Interrupted Cut (48)
- Smooth Cut (49)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (2)
- 75.0 (11)
- 90.0 (17)
- 93.0 (10)
- 95.0 (12)
to
Connection Style
Connection Style
- KM (19)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (15)
- 2.0 (38)
- 3.0 (2)
- 4.0 (27)
- 6.0 (2)
- 8.0 (25)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 3.937 in(51)
- 4.331 in(1)
to
Over All Length [L]
Over All Length [L]
- 100.0 mm(51)
- 110.0 mm(1)
to
Corner Radius
Corner Radius
- 0.002 in(1)
- 0.003 in(4)
- 0.004 in(10)
- 0.005 in(2)
- 0.006 in(4)
- 0.007 in(4)
- 0.008 in(8)
- 0.009 in(2)
- 0.01 in(4)
- 0.011 in(1)
- 0.012 in(2)
- 0.013 in(4)
- 0.014 in(8)
- 0.016 in(15)
- 0.018 in(4)
- 0.019 in(1)
- 0.02 in(2)
- 0.023 in(5)
- 0.031 in(28)
- 0.032 in(2)
- 0.035 in(4)
- 0.039 in(2)
- 0.047 in(28)
- 0.049 in(2)
- 0.059 in(2)
- 0.062 in(2)
- 0.063 in(28)
- 0.069 in(2)
- 0.078 in(2)
- 0.079 in(3)
- 0.089 in(2)
- 0.094 in(29)
- 0.098 in(2)
- 0.125 in(2)
- 0.126 in(2)
- 0.157 in(4)
- 0.25 in(2)
- 0.375 in(2)
- 0.394 in(1)
- 0.492 in(1)
- 0.5 in(2)
- 0.63 in(1)
to
Corner Radius
Corner Radius
- 0.05 mm(1)
- 0.075 mm(4)
- 0.1 mm(10)
- 0.125 mm(2)
- 0.15 mm(4)
- 0.175 mm(4)
- 0.2 mm(8)
- 0.225 mm(2)
- 0.25 mm(4)
- 0.275 mm(1)
- 0.3 mm(2)
- 0.325 mm(4)
- 0.35 mm(8)
- 0.4 mm(15)
- 0.45 mm(4)
- 0.475 mm(1)
- 0.5 mm(2)
- 0.575 mm(5)
- 0.775 mm(2)
- 0.8 mm(26)
- 0.825 mm(2)
- 0.9 mm(4)
- 1.0 mm(2)
- 1.2 mm(28)
- 1.25 mm(2)
- 1.5 mm(2)
- 1.575 mm(2)
- 1.6 mm(28)
- 1.75 mm(2)
- 1.975 mm(2)
- 2.0 mm(3)
- 2.25 mm(2)
- 2.375 mm(7)
- 2.4 mm(29)
- 2.5 mm(2)
- 3.175 mm(2)
- 3.2 mm(2)
- 4.0 mm(4)
- 6.35 mm(2)
- 9.525 mm(2)
- 10.0 mm(1)
- 12.5 mm(1)
- 12.7 mm(2)
- 16.0 mm(1)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- CW2015 (12)
- CW5025 (10)
- K060 (2)
- K090 (8)
- K1 (4)
- K313 (33)
- K420 (5)
- K68 (40)
- KB1340 (2)
- KB1345 (2)
- KB1610 (4)
- KB1630 (8)
- KB5610 (4)
- KB5630 (4)
- KBH10 (8)
- KBH10B (8)
- KBH20 (9)
- KBH20B (8)
- KBK35 (2)
- KC5010 (38)
- KC5025 (31)
- KC5410 (25)
- KC720 (4)
- KC730 (20)
- KC850 (40)
- KC9110 (1)
- KC9125 (5)
- KCK05 (12)
- KCK05B (2)
- KCK15 (22)
- KCK15B (23)
- KCK20 (30)
- KCK20B (25)
- KCM15 (16)
- KCM15B (20)
- KCM25 (27)
- KCM25B (29)
- KCM35 (26)
- KCM35B (10)
- KCP05 (8)
- KCP05B (8)
- KCP10 (36)
- KCP10B (34)
- KCP25 (38)
- KCP25B (43)
- KCP25C (40)
- KCP30 (35)
- KCP30B (24)
- KCP40 (33)
- KCP40B (31)
- KCPK05 (25)
- KCS10 (3)
- KCS10B (26)
- KCU10 (38)
- KCU10B (37)
- KCU25 (33)
- KCU25B (30)
- KD1400 (4)
- KD1405 (4)
- KD1425 (6)
- KS15 (2)
- KT315 (11)
- KT325 (2)
- KTP10 (8)
- KTP25S (8)
- KY1540 (2)
- KY1615 (1)
- KY3500 (24)
- KY4300 (14)
- KY4400 (20)
- KYHK15B (22)
- KYK10 (2)
- KYK25 (14)
- KYS25 (2)
- KYS30 (2)
- PB100 (2)
- SP4019 (2)
- THM (16)
- THM-X (6)
- THMF-X (2)
- TN10P (22)
- TN10U (8)
- TN15M (6)
- TN15U (4)
- TN2000 (18)
- TN20K (22)
- TN20P (22)
- TN30M (14)
- TN30P (24)
- TN4000 (18)
- TN6010 (10)
- TN6025 (6)
- TTR-X (4)
- TTS (14)
- WBH10P (4)
- WBH10U (2)
- WBH20P (8)
- WBH30P (4)
- WDN00U (2)
- WDN25U (4)
- WK05CT (26)
- WK15CT (6)
- WK20CT (30)
- WM15CT (24)
- WM25CT (29)
- WM35CT (26)
- WP05CT (2)
- WP15CT (35)
- WP25CT (37)
- WP35CT (37)
- WS10PT (24)
- WS25PT (26)
- WU10HT (23)
- WU10PT (10)
- WU25PT (9)
- X00580 (2)
- X00581 (2)
- X00582 (2)
- X00583 (2)
- X00584 (2)
- X00585 (2)
- X00586 (2)
- X00591 (2)
- X00592 (2)
- X00593 (2)
- X00594 (2)
- X00596 (2)
- X00597 (2)
- X00599 (2)
Hand Of Tool
Hand Of Tool
- L (7)
- N (5)
- R (7)
Wiper Insert
Wiper Insert
- N (50)
- Y (12)
F Dimension
F Dimension
- 0.0 mm(2)
- 10.0 mm(1)
- 12.5 mm(1)
- 16.0 mm(1)
- 58.0 mm(8)
- 63.0 mm(6)
to
F Dimension
F Dimension
- 0.0 in(2)
- 0.394 in(1)
- 0.492 in(1)
- 0.63 in(1)
- 2.283 in(8)
- 2.48 in(6)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 120.0 mm(33)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 4.724 in(33)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 393.661 in(7)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 9999.0 mm(7)
to
Cutting Direction
Cutting Direction
- B (3)
- S (16)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (14)
- NEGATIVE-ZERO (2)
Maximum Bore Depth
Maximum Bore Depth
- 3.937 in(33)
to
Maximum Bore Depth
Maximum Bore Depth
- 100.0 mm(33)
to
Front-End
Adapter Front-End
Adapter Front-End
- BOEING TAPER FLANGE (1)
- CARTRIDGE MOUNT (4)
- END MILL ADAPTER (18)
- ER COLLET CHUCK (4)
- FM ADAPTER (1)
- HTS MODULAR ADAPTER (2)
- HYDRAULIC CHUCK (25)
- HYDRAULIC CHUCK-HIGH TORQUE (5)
- HYDRAULIC CHUCK-SLIM LINE (7)
- KM MODULAR ADAPTER (15)
- SHELL MILL ADAPTER (64)
- SHRINK FIT ADAPTER (36)
- SQUARE SHANK ADAPTER (9)
- TUNABLE SHELL MILL ADAPTER (6)
- WHISTLE NOTCH ADAPTER (10)
Clamp Style
Clamp Style
- D (8)
- M (29)
- N (8)
- P (4)
- X (3)
Cutting Width
Cutting Width
- 0.0394 in(2)
- 0.047 in(2)
- 0.0472 in(2)
- 0.0591 in(2)
- 0.062 in(2)
- 0.0689 in(2)
- 0.072 in(2)
- 0.078 in(2)
- 0.0787 in(2)
- 0.079 in(1)
- 0.0866 in(2)
- 0.088 in(2)
- 0.0886 in(1)
- 0.094 in(2)
- 0.097 in(2)
- 0.0984 in(2)
- 0.105 in(2)
- 0.1083 in(2)
- 0.11 in(2)
- 0.118 in(2)
- 0.1181 in(4)
- 0.122 in(2)
- 0.125 in(4)
- 0.126 in(2)
- 0.128 in(2)
- 0.131 in(1)
- 0.1378 in(4)
- 0.142 in(2)
- 0.156 in(2)
- 0.157 in(2)
- 0.1574 in(3)
- 0.1575 in(4)
- 0.167 in(2)
- 0.1673 in(2)
- 0.1771 in(4)
- 0.1772 in(4)
- 0.178 in(2)
- 0.185 in(2)
- 0.188 in(4)
- 0.189 in(4)
- 0.192 in(1)
- 0.193 in(1)
- 0.195 in(2)
- 0.196 in(2)
- 0.1969 in(2)
- 0.197 in(1)
- 0.213 in(2)
- 0.2165 in(1)
- 0.2166 in(1)
- 0.2362 in(2)
- 0.25 in(3)
- 0.256 in(2)
- 0.281 in(1)
- 0.312 in(1)
- 0.375 in(1)
- 0.381 in(2)
- 0.384 in(2)
to
Cutting Width
Cutting Width
- 1.0 mm(2)
- 1.19 mm(1)
- 1.194 mm(2)
- 1.2 mm(2)
- 1.5 mm(2)
- 1.57 mm(2)
- 1.575 mm(2)
- 1.75 mm(2)
- 1.829 mm(2)
- 1.981 mm(2)
- 2.0 mm(2)
- 2.2 mm(2)
- 2.235 mm(2)
- 2.236 mm(1)
- 2.25 mm(1)
- 2.387 mm(1)
- 2.388 mm(2)
- 2.39 mm(1)
- 2.464 mm(2)
- 2.5 mm(2)
- 2.667 mm(2)
- 2.75 mm(2)
- 2.794 mm(2)
- 2.997 mm(2)
- 3.0 mm(4)
- 3.099 mm(2)
- 3.17 mm(2)
- 3.175 mm(4)
- 3.18 mm(1)
- 3.2 mm(2)
- 3.25 mm(2)
- 3.251 mm(1)
- 3.32 mm(1)
- 3.329 mm(1)
- 3.5 mm(4)
- 3.607 mm(2)
- 3.96 mm(2)
- 3.962 mm(2)
- 3.974 mm(1)
- 3.988 mm(2)
- 4.0 mm(4)
- 4.242 mm(2)
- 4.25 mm(2)
- 4.5 mm(4)
- 4.521 mm(2)
- 4.699 mm(2)
- 4.775 mm(4)
- 4.78 mm(1)
- 4.785 mm(1)
- 4.788 mm(1)
- 4.8 mm(2)
- 4.801 mm(4)
- 4.88 mm(1)
- 4.9 mm(1)
- 4.95 mm(2)
- 4.953 mm(1)
- 4.978 mm(2)
- 5.0 mm(2)
- 5.004 mm(1)
- 5.41 mm(2)
- 5.5 mm(2)
- 6.0 mm(2)
- 6.35 mm(3)
- 6.36 mm(1)
- 6.502 mm(2)
- 7.137 mm(1)
- 7.925 mm(1)
- 9.525 mm(1)
- 9.677 mm(2)
- 9.754 mm(2)
to
Front End Type
Front End Type
- BTF - BTF (1)
- FDA - Milling Cutter Arbor (64)
- FLK - Flange Adapter Kenna (1)
- HTS - Deep Hole Index Drill (2)
- KMT - KM Adapter (15)
- MCS - Modular Cartridge System (4)
- SPK-Holding Arbor-Spindle Head (6)
- SZK - Collet Taper (4)
- VKT - Square Shank (9)
- ZYL - Cylindrical Adapter (101)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (18)
- D-DIAMOND/RHOMBIC 55 (4)
- R-ROUND (9)
- S-SQUARE 90 (7)
- T-TRIANGLE 60 (4)
- TN-TOP NOTCH (8)
- V-DIAMOND/RHOMBIC 35 (2)
Front End Style
Front End Style
- BTF01 Standard BTF (1)
- FDA22 Transv Drive & SHCS (64)
- FLK32FlngMt 3&6Bolt 67&97DBC (1)
- HTS01 Standard HTS Shank (2)
- KMT00 All KM, except 02,05,09 (13)
- KMT09 KM4X 4 ball connection (2)
- MCS01 Modular Deep Grooving (4)
- SPK02 Bolt Circ Dia 101.6 mm (6)
- SZK02 Collets 8 Degree Taper (4)
- VKT01 Std Design (9)
- ZYL01 Straight Shank (73)
- ZYL10 Weldon Shank (18)
- ZYL13 2Deg-Whistle Notch (10)
Insert Size
Insert Size
- 3 (2)
- 4 (2)
- 5 (2)
- 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.581 in(1)
- 1.975 in(1)
- 2.368 in(1)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 40.15 mm(1)
- 50.15 mm(1)
- 60.15 mm(1)
to
Gage Length
Gage Length
- 50.0000 in(3)
- 50.8000 in(2)
- 52.6000 in(3)
- 55.0000 in(4)
- 57.1500 in(3)
- 60.0000 in(4)
- 67.2350 in(1)
- 75.0000 in(2)
- 76.2000 in(2)
- 76.2500 in(2)
- 80.0000 in(5)
- 82.5500 in(1)
- 84.7600 in(1)
- 85.0000 in(8)
- 85.8500 in(1)
- 87.0000 in(2)
- 88.5000 in(2)
- 88.9000 in(1)
- 90.0000 in(6)
- 95.0000 in(4)
- 95.2500 in(4)
- 98.9000 in(1)
- 100.0000 in(19)
- 101.6000 in(9)
- 105.0000 in(4)
- 105.9000 in(1)
- 107.9500 in(2)
- 108.1550 in(1)
- 110.0000 in(1)
- 110.1600 in(1)
- 114.3000 in(1)
- 115.0000 in(3)
- 116.9450 in(1)
- 120.0000 in(7)
- 120.6500 in(1)
- 126.1850 in(1)
- 127.0000 in(1)
- 127.9400 in(1)
- 130.0000 in(1)
- 133.5550 in(1)
- 135.0000 in(3)
- 135.5600 in(1)
- 139.7000 in(1)
- 142.3450 in(1)
- 146.0500 in(1)
- 150.0000 in(15)
- 151.5850 in(1)
- 152.4000 in(8)
- 153.3400 in(1)
- 158.9550 in(1)
- 160.0000 in(20)
- 160.9600 in(1)
- 167.7450 in(1)
- 176.9850 in(1)
- 178.7400 in(1)
- 184.3550 in(1)
- 186.3600 in(1)
- 193.1450 in(1)
- 200.0000 in(15)
- 202.3850 in(1)
- 204.1400 in(1)
- 209.7550 in(1)
- 218.5450 in(1)
- 227.7850 in(1)
- 229.5400 in(1)
- 260.0000 in(1)
- 265.8800 in(1)
- 266.7000 in(1)
- 291.2850 in(1)
- 317.5000 in(1)
- 320.0000 in(1)
- 330.0000 in(1)
- 330.2000 in(1)
Gage Length
Gage Length
- 50.0000 mm(3)
- 50.8000 mm(2)
- 52.6000 mm(3)
- 55.0000 mm(4)
- 57.1500 mm(3)
- 60.0000 mm(4)
- 67.2350 mm(1)
- 75.0000 mm(2)
- 76.2000 mm(2)
- 76.2500 mm(2)
- 80.0000 mm(5)
- 82.5500 mm(1)
- 84.7600 mm(1)
- 85.0000 mm(8)
- 85.8500 mm(1)
- 87.0000 mm(2)
- 88.5000 mm(2)
- 88.9000 mm(1)
- 90.0000 mm(6)
- 95.0000 mm(4)
- 95.2500 mm(4)
- 98.9000 mm(1)
- 100.0000 mm(19)
- 101.6000 mm(9)
- 105.0000 mm(4)
- 105.9000 mm(1)
- 107.9500 mm(2)
- 108.1550 mm(1)
- 110.0000 mm(1)
- 110.1600 mm(1)
- 114.3000 mm(1)
- 115.0000 mm(3)
- 116.9450 mm(1)
- 120.0000 mm(7)
- 120.6500 mm(1)
- 126.1850 mm(1)
- 127.0000 mm(1)
- 127.9400 mm(1)
- 130.0000 mm(1)
- 133.5550 mm(1)
- 135.0000 mm(3)
- 135.5600 mm(1)
- 139.7000 mm(1)
- 142.3450 mm(1)
- 146.0500 mm(1)
- 150.0000 mm(15)
- 151.5850 mm(1)
- 152.4000 mm(8)
- 153.3400 mm(1)
- 158.9550 mm(1)
- 160.0000 mm(20)
- 160.9600 mm(1)
- 167.7450 mm(1)
- 176.9850 mm(1)
- 178.7400 mm(1)
- 184.3550 mm(1)
- 186.3600 mm(1)
- 193.1450 mm(1)
- 200.0000 mm(15)
- 202.3850 mm(1)
- 204.1400 mm(1)
- 209.7550 mm(1)
- 218.5450 mm(1)
- 227.7850 mm(1)
- 229.5400 mm(1)
- 260.0000 mm(1)
- 265.8800 mm(1)
- 266.7000 mm(1)
- 291.2850 mm(1)
- 317.5000 mm(1)
- 320.0000 mm(1)
- 330.0000 mm(1)
- 330.2000 mm(1)
Front End Size
Front End Size
- 6.0 in(7)
- 6.35 in(4)
- 7.94 in(2)
- 8.0 in(7)
- 9.525 in(1)
- 9.53 in(3)
- 10.0 in(7)
- 12.0 in(7)
- 12.7 in(5)
- 14.0 in(2)
- 15.875 in(1)
- 15.88 in(3)
- 16.0 in(7)
- 18.0 in(5)
- 19.04 in(5)
- 19.05 in(11)
- 20.0 in(8)
- 22.0 in(5)
- 22.22 in(1)
- 25.0 in(6)
- 25.39 in(10)
- 25.4 in(11)
- 27.0 in(6)
- 31.74 in(5)
- 31.75 in(8)
- 32.0 in(12)
- 38.09 in(5)
- 38.1 in(5)
- 40.0 in(6)
- 50.0 in(7)
- 50.8 in(3)
- 50.81 in(1)
- 60.0 in(2)
- 63.0 in(4)
- 63.5 in(3)
- 80.0 in(3)
- 100.0 in(1)
to
Front End Size
Front End Size
- 6.0 mm(7)
- 6.35 mm(4)
- 7.94 mm(2)
- 8.0 mm(7)
- 9.525 mm(1)
- 9.53 mm(3)
- 10.0 mm(7)
- 12.0 mm(7)
- 12.7 mm(5)
- 14.0 mm(2)
- 15.875 mm(1)
- 15.88 mm(3)
- 16.0 mm(7)
- 18.0 mm(5)
- 19.04 mm(5)
- 19.05 mm(11)
- 20.0 mm(8)
- 22.0 mm(5)
- 22.22 mm(1)
- 25.0 mm(6)
- 25.39 mm(10)
- 25.4 mm(11)
- 27.0 mm(6)
- 31.74 mm(5)
- 31.75 mm(8)
- 32.0 mm(12)
- 38.09 mm(5)
- 38.1 mm(5)
- 40.0 mm(6)
- 50.0 mm(7)
- 50.8 mm(3)
- 50.81 mm(1)
- 60.0 mm(2)
- 63.0 mm(4)
- 63.5 mm(3)
- 80.0 mm(3)
- 100.0 mm(1)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (8)
- B L (9)
- C A (21)
- C N (24)
- D P (10)
- H T (11)
- H W (50)
Back-End
Connection Type
Connection Type
- TAPER SHANK (19)
System Size
System Size
- BTF46 (33)
- KM4X100 (182)
- KM4X63 (9)
Back-End Diameter
Back-End Diameter
- 46.025 mm(31)
- 63.0 mm(9)
- 68.98 mm(1)
- 100.0 mm(215)
- 103.977 mm(1)
to
Back-End Diameter
Back-End Diameter
- 1.812 in(31)
- 2.5 in(9)
- 2.716 in(1)
- 3.9 in(54)
- 3.922 in(1)
- 3.934 in(44)
- 3.9343 in(1)
- 3.937 in(39)
- 3.94 in(24)
- 4.094 in(1)
to
Other
Insert Hand
Insert Hand
- L (4)
- N (42)
- R (4)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
