BF System
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (176)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(176)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(176)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(176)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(176)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(176)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(176)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(176)
- M Stainless Steel (68)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(68)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(68)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(65)
- K Cast Iron (177)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(177)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(177)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(177)
- N Non-Ferrous Materials (69)
- N1Wrought Aluminum (69)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(69)
- N3High-Silicon Aluminum Alloys Si >12.2%(69)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (69)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (69)
- N6Carbon, Graphite Composites, CFRP (69)
- N7MMC's (66)
- S High-Temp Alloys (65)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(65)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(65)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(65)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(65)
Applications
Applications
Counterboring (11)
Countersinking (57)
Drilling (157)
Inclined Exit Drilling (57)
Stacked Plates Drilling (133)
Cutting Diameter
Cutting Diameter
- 0.125 in(1)
- 0.1339 in(1)
- 0.134 in(1)
- 0.1378 in(1)
- 0.1417 in(1)
- 0.1496 in(2)
- 0.1535 in(1)
- 0.1563 in(1)
- 0.1575 in(1)
- 0.161 in(2)
- 0.1614 in(1)
- 0.1654 in(1)
- 0.1693 in(1)
- 0.1772 in(1)
- 0.181 in(2)
- 0.1811 in(1)
- 0.182 in(2)
- 0.1875 in(1)
- 0.1969 in(1)
- 0.2008 in(1)
- 0.201 in(2)
- 0.2047 in(1)
- 0.2087 in(1)
- 0.2126 in(1)
- 0.213 in(1)
- 0.2165 in(1)
- 0.218 in(2)
- 0.2185 in(1)
- 0.2188 in(1)
- 0.2205 in(1)
- 0.2283 in(1)
- 0.2362 in(1)
- 0.24 in(2)
- 0.2402 in(1)
- 0.2441 in(1)
- 0.25 in(2)
- 0.252 in(1)
- 0.2559 in(1)
- 0.257 in(1)
- 0.2598 in(1)
- 0.2638 in(1)
- 0.2656 in(1)
- 0.2677 in(1)
- 0.2717 in(1)
- 0.2756 in(1)
- 0.2813 in(1)
- 0.287 in(2)
- 0.2874 in(1)
- 0.2913 in(1)
- 0.2953 in(1)
- 0.2969 in(1)
- 0.3071 in(1)
- 0.311 in(1)
- 0.3125 in(2)
- 0.315 in(2)
- 0.3189 in(2)
- 0.319 in(3)
- 0.3228 in(1)
- 0.323 in(1)
- 0.3268 in(1)
- 0.3281 in(2)
- 0.3307 in(2)
- 0.332 in(1)
- 0.3346 in(3)
- 0.3386 in(3)
- 0.3425 in(1)
- 0.3438 in(3)
- 0.3465 in(1)
- 0.3543 in(1)
- 0.358 in(2)
- 0.3583 in(1)
- 0.3594 in(1)
- 0.368 in(1)
- 0.3701 in(1)
- 0.374 in(1)
- 0.3858 in(1)
- 0.3906 in(1)
- 0.3937 in(3)
- 0.3976 in(2)
- 0.398 in(2)
- 0.4016 in(2)
- 0.404 in(2)
- 0.4055 in(1)
- 0.4063 in(4)
- 0.4094 in(3)
- 0.4134 in(1)
- 0.4173 in(1)
- 0.4219 in(1)
- 0.4252 in(1)
- 0.4331 in(1)
- 0.437 in(3)
- 0.4375 in(2)
- 0.4409 in(1)
- 0.4528 in(1)
- 0.4531 in(1)
- 0.4606 in(1)
- 0.4646 in(1)
- 0.4685 in(1)
- 0.4724 in(2)
- 0.4764 in(1)
- 0.48 in(2)
- 0.4803 in(1)
- 0.4844 in(2)
- 0.4921 in(1)
- 0.5118 in(1)
- 0.5156 in(1)
- 0.516 in(2)
- 0.5197 in(1)
- 0.5315 in(1)
- 0.5512 in(4)
- 0.555 in(2)
- 0.5551 in(3)
- 0.5591 in(2)
- 0.5625 in(4)
- 0.563 in(3)
- 0.5669 in(3)
- 0.5709 in(1)
- 0.5827 in(1)
- 0.5906 in(3)
- 0.5945 in(2)
- 0.5984 in(2)
- 0.6055 in(2)
- 0.6094 in(2)
- 0.61 in(2)
- 0.6102 in(1)
- 0.6142 in(2)
- 0.622 in(2)
- 0.625 in(2)
- 0.6299 in(2)
- 0.631 in(1)
- 0.6339 in(1)
- 0.6417 in(1)
- 0.6457 in(1)
- 0.6496 in(2)
- 0.65 in(1)
- 0.6535 in(1)
- 0.6563 in(1)
- 0.6575 in(1)
- 0.6693 in(1)
- 0.689 in(3)
- 0.7087 in(1)
to
Cutting Diameter
Cutting Diameter
- 3.175 mm(1)
- 3.4 mm(2)
- 3.5 mm(1)
- 3.6 mm(1)
- 3.8 mm(2)
- 3.9 mm(1)
- 3.97 mm(1)
- 4.0 mm(1)
- 4.1 mm(3)
- 4.2 mm(1)
- 4.3 mm(1)
- 4.5 mm(1)
- 4.6 mm(3)
- 4.623 mm(2)
- 4.763 mm(1)
- 5.0 mm(1)
- 5.1 mm(3)
- 5.2 mm(1)
- 5.3 mm(1)
- 5.4 mm(1)
- 5.41 mm(1)
- 5.5 mm(1)
- 5.55 mm(3)
- 5.558 mm(1)
- 5.6 mm(1)
- 5.8 mm(1)
- 6.0 mm(1)
- 6.1 mm(3)
- 6.2 mm(1)
- 6.35 mm(2)
- 6.4 mm(1)
- 6.5 mm(1)
- 6.528 mm(1)
- 6.6 mm(1)
- 6.7 mm(1)
- 6.746 mm(1)
- 6.8 mm(1)
- 6.9 mm(1)
- 7.0 mm(1)
- 7.145 mm(1)
- 7.3 mm(3)
- 7.4 mm(1)
- 7.5 mm(1)
- 7.5406 mm(1)
- 7.8 mm(1)
- 7.9 mm(1)
- 7.938 mm(2)
- 8.0 mm(2)
- 8.1 mm(5)
- 8.2 mm(1)
- 8.204 mm(1)
- 8.3 mm(1)
- 8.334 mm(1)
- 8.3344 mm(1)
- 8.4 mm(2)
- 8.433 mm(1)
- 8.5 mm(3)
- 8.6 mm(3)
- 8.7 mm(1)
- 8.733 mm(3)
- 8.8 mm(1)
- 9.0 mm(1)
- 9.1 mm(3)
- 9.129 mm(1)
- 9.347 mm(1)
- 9.4 mm(1)
- 9.5 mm(1)
- 9.8 mm(1)
- 9.921 mm(1)
- 10.0 mm(3)
- 10.1 mm(4)
- 10.2 mm(2)
- 10.262 mm(2)
- 10.3 mm(1)
- 10.32 mm(4)
- 10.4 mm(3)
- 10.5 mm(1)
- 10.6 mm(1)
- 10.7156 mm(1)
- 10.8 mm(1)
- 11.0 mm(1)
- 11.1 mm(3)
- 11.112 mm(1)
- 11.113 mm(1)
- 11.2 mm(1)
- 11.5 mm(1)
- 11.508 mm(1)
- 11.7 mm(1)
- 11.8 mm(1)
- 11.9 mm(1)
- 12.0 mm(2)
- 12.1 mm(1)
- 12.2 mm(3)
- 12.304 mm(2)
- 12.5 mm(1)
- 13.0 mm(1)
- 13.096 mm(1)
- 13.1 mm(2)
- 13.2 mm(1)
- 13.5 mm(1)
- 14.0 mm(4)
- 14.1 mm(5)
- 14.2 mm(2)
- 14.288 mm(4)
- 14.3 mm(3)
- 14.4 mm(3)
- 14.5 mm(1)
- 14.8 mm(1)
- 15.0 mm(3)
- 15.1 mm(2)
- 15.2 mm(2)
- 15.38 mm(2)
- 15.479 mm(2)
- 15.5 mm(3)
- 15.6 mm(2)
- 15.8 mm(2)
- 15.875 mm(2)
- 16.0 mm(2)
- 16.027 mm(1)
- 16.1 mm(1)
- 16.3 mm(1)
- 16.4 mm(1)
- 16.5 mm(3)
- 16.6 mm(1)
- 16.67 mm(1)
- 16.7 mm(1)
- 17.0 mm(1)
- 17.5 mm(3)
- 18.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 10.0 mm(1)
- 10.6 mm(1)
- 11.2 mm(1)
- 12.3 mm(2)
- 12.9 mm(1)
- 13.3 mm(1)
- 13.4 mm(1)
- 13.7 mm(1)
- 14.2 mm(1)
- 14.7 mm(1)
- 15.6 mm(1)
- 15.8 mm(1)
- 15.9 mm(1)
- 16.6 mm(1)
- 17.6 mm(1)
- 17.8 mm(1)
- 18.2 mm(1)
- 18.6 mm(1)
- 19.0 mm(1)
- 19.3 mm(1)
- 19.4 mm(2)
- 19.5 mm(1)
- 20.3 mm(1)
- 21.0 mm(1)
- 21.1 mm(1)
- 21.5 mm(1)
- 22.0 mm(1)
- 22.2 mm(1)
- 22.5 mm(1)
- 22.6 mm(1)
- 22.9 mm(1)
- 23.2 mm(1)
- 23.4 mm(1)
- 23.5 mm(1)
- 23.9 mm(1)
- 24.2 mm(1)
- 24.6 mm(1)
- 24.9 mm(1)
- 25.3 mm(1)
- 25.4 mm(1)
- 25.5 mm(1)
- 26.2 mm(1)
- 26.5 mm(1)
- 26.6 mm(2)
- 26.8 mm(2)
- 27.0 mm(1)
- 27.2 mm(1)
- 27.4 mm(1)
- 27.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.3 mm(1)
- 28.4 mm(1)
- 28.5 mm(1)
- 28.8 mm(1)
- 29.1 mm(1)
- 29.5 mm(1)
- 29.6 mm(1)
- 29.9 mm(1)
- 30.7 mm(1)
- 31.0 mm(1)
- 31.2 mm(2)
- 31.4 mm(1)
- 31.5 mm(2)
- 31.7 mm(1)
- 31.9 mm(1)
- 32.2 mm(1)
- 32.4 mm(1)
- 32.7 mm(1)
- 32.9 mm(2)
- 33.1 mm(2)
- 33.8 mm(2)
- 34.3 mm(1)
- 34.5 mm(1)
- 34.8 mm(1)
- 34.9 mm(1)
- 35.0 mm(1)
- 35.56 mm(1)
- 36.0 mm(1)
- 36.7 mm(1)
- 36.9 mm(1)
- 37.6 mm(1)
- 38.5 mm(1)
- 38.6 mm(1)
- 38.7 mm(1)
- 40.2 mm(1)
- 40.7 mm(1)
- 41.5 mm(1)
- 41.7 mm(1)
- 42.0 mm(1)
- 42.2 mm(1)
- 43.1 mm(1)
- 43.5 mm(2)
- 43.6 mm(1)
- 44.5 mm(1)
- 45.0 mm(1)
- 48.0 mm(2)
- 50.0 mm(1)
- 51.0 mm(1)
- 58.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.3937 in(1)
- 0.4173 in(1)
- 0.4409 in(1)
- 0.4843 in(2)
- 0.5079 in(1)
- 0.5236 in(1)
- 0.5276 in(1)
- 0.5394 in(1)
- 0.5591 in(1)
- 0.5787 in(1)
- 0.61 in(1)
- 0.622 in(1)
- 0.626 in(1)
- 0.6535 in(1)
- 0.6929 in(1)
- 0.7008 in(1)
- 0.7165 in(1)
- 0.7323 in(1)
- 0.748 in(1)
- 0.76 in(1)
- 0.7638 in(2)
- 0.7677 in(1)
- 0.7992 in(1)
- 0.8268 in(1)
- 0.8307 in(1)
- 0.8465 in(1)
- 0.8661 in(1)
- 0.874 in(1)
- 0.8858 in(1)
- 0.8898 in(1)
- 0.9016 in(1)
- 0.91 in(1)
- 0.9213 in(1)
- 0.9252 in(1)
- 0.9409 in(1)
- 0.9528 in(1)
- 0.9685 in(1)
- 0.9803 in(1)
- 0.9961 in(1)
- 1.0 in(2)
- 1.0315 in(1)
- 1.0433 in(1)
- 1.0472 in(1)
- 1.05 in(1)
- 1.0551 in(2)
- 1.06 in(1)
- 1.0709 in(1)
- 1.0787 in(1)
- 1.08 in(1)
- 1.0906 in(1)
- 1.1024 in(1)
- 1.1142 in(1)
- 1.1181 in(1)
- 1.122 in(1)
- 1.1339 in(1)
- 1.1457 in(1)
- 1.1614 in(1)
- 1.1654 in(1)
- 1.1772 in(1)
- 1.2087 in(1)
- 1.2205 in(1)
- 1.2283 in(2)
- 1.2362 in(1)
- 1.24 in(1)
- 1.2402 in(1)
- 1.248 in(1)
- 1.2559 in(1)
- 1.2677 in(1)
- 1.2756 in(1)
- 1.2874 in(1)
- 1.2953 in(2)
- 1.3031 in(2)
- 1.3307 in(2)
- 1.3504 in(1)
- 1.3583 in(1)
- 1.3701 in(1)
- 1.374 in(1)
- 1.378 in(1)
- 1.4 in(1)
- 1.42 in(1)
- 1.4449 in(1)
- 1.4528 in(1)
- 1.4803 in(1)
- 1.5157 in(1)
- 1.5197 in(1)
- 1.5236 in(1)
- 1.5827 in(1)
- 1.6024 in(1)
- 1.6339 in(1)
- 1.6417 in(1)
- 1.65 in(1)
- 1.6614 in(1)
- 1.6969 in(1)
- 1.71 in(2)
- 1.7165 in(1)
- 1.752 in(1)
- 1.77 in(1)
- 1.89 in(2)
- 1.9685 in(1)
- 2.01 in(1)
- 2.2834 in(1)
to
Reach
Reach
- 0.7165 in(1)
- 0.7441 in(1)
- 0.7717 in(1)
- 0.8228 in(2)
- 0.8504 in(1)
- 0.8701 in(1)
- 0.878 in(1)
- 0.8937 in(1)
- 0.9173 in(1)
- 0.9409 in(1)
- 0.98 in(1)
- 1.0039 in(1)
- 1.0079 in(1)
- 1.0433 in(1)
- 1.0906 in(1)
- 1.1024 in(1)
- 1.122 in(1)
- 1.1417 in(1)
- 1.1614 in(1)
- 1.1811 in(1)
- 1.19 in(1)
- 1.1929 in(1)
- 1.2008 in(1)
- 1.2402 in(1)
- 1.2756 in(1)
- 1.2835 in(1)
- 1.3031 in(1)
- 1.3268 in(1)
- 1.3386 in(1)
- 1.3543 in(1)
- 1.3583 in(1)
- 1.374 in(1)
- 1.39 in(1)
- 1.3976 in(1)
- 1.4055 in(1)
- 1.4252 in(1)
- 1.437 in(1)
- 1.4764 in(1)
- 1.4921 in(1)
- 1.5118 in(1)
- 1.5157 in(1)
- 1.5591 in(1)
- 1.5748 in(1)
- 1.58 in(1)
- 1.5906 in(1)
- 1.5984 in(1)
- 1.6063 in(2)
- 1.6299 in(1)
- 1.6378 in(1)
- 1.65 in(1)
- 1.6535 in(1)
- 1.6693 in(1)
- 1.685 in(1)
- 1.689 in(1)
- 1.6929 in(1)
- 1.6969 in(1)
- 1.7283 in(1)
- 1.7323 in(1)
- 1.7677 in(1)
- 1.7756 in(1)
- 1.7913 in(1)
- 1.8307 in(1)
- 1.8465 in(1)
- 1.8583 in(1)
- 1.878 in(1)
- 1.8898 in(1)
- 1.8937 in(1)
- 1.9055 in(1)
- 1.9134 in(1)
- 1.9291 in(1)
- 1.9409 in(1)
- 1.9449 in(1)
- 1.9567 in(1)
- 1.9803 in(1)
- 1.9882 in(2)
- 2.0 in(1)
- 2.0354 in(2)
- 2.063 in(1)
- 2.0748 in(1)
- 2.0906 in(1)
- 2.0984 in(1)
- 2.1142 in(1)
- 2.1496 in(1)
- 2.2126 in(1)
- 2.2323 in(1)
- 2.2677 in(1)
- 2.3228 in(1)
- 2.3386 in(1)
- 2.3504 in(1)
- 2.4291 in(1)
- 2.4803 in(1)
- 2.5236 in(1)
- 2.5354 in(1)
- 2.5827 in(1)
- 2.6063 in(2)
- 2.6339 in(1)
- 2.685 in(2)
- 2.7362 in(1)
- 2.8504 in(2)
- 3.0118 in(1)
to
Reach
Reach
- 18.2 mm(1)
- 18.9 mm(1)
- 19.6 mm(1)
- 20.9 mm(2)
- 21.6 mm(1)
- 22.1 mm(1)
- 22.3 mm(1)
- 22.7 mm(1)
- 23.3 mm(1)
- 23.9 mm(1)
- 25.0 mm(1)
- 25.5 mm(1)
- 25.6 mm(1)
- 26.5 mm(1)
- 27.7 mm(1)
- 28.0 mm(1)
- 28.5 mm(1)
- 29.0 mm(1)
- 29.5 mm(1)
- 30.0 mm(1)
- 30.2 mm(1)
- 30.3 mm(1)
- 30.5 mm(1)
- 31.5 mm(1)
- 32.4 mm(1)
- 32.6 mm(1)
- 33.1 mm(1)
- 33.7 mm(1)
- 34.0 mm(1)
- 34.4 mm(1)
- 34.5 mm(1)
- 34.9 mm(1)
- 35.3 mm(1)
- 35.5 mm(1)
- 35.7 mm(1)
- 36.2 mm(1)
- 36.5 mm(1)
- 37.5 mm(1)
- 37.9 mm(1)
- 38.4 mm(1)
- 38.5 mm(1)
- 39.6 mm(1)
- 40.0 mm(1)
- 40.1 mm(1)
- 40.4 mm(1)
- 40.6 mm(1)
- 40.8 mm(2)
- 41.4 mm(1)
- 41.6 mm(1)
- 41.8 mm(1)
- 42.0 mm(1)
- 42.4 mm(1)
- 42.8 mm(1)
- 42.9 mm(1)
- 43.0 mm(1)
- 43.1 mm(1)
- 43.9 mm(1)
- 44.0 mm(1)
- 44.9 mm(1)
- 45.1 mm(1)
- 45.5 mm(1)
- 46.5 mm(1)
- 46.9 mm(1)
- 47.2 mm(1)
- 47.7 mm(1)
- 48.0 mm(1)
- 48.1 mm(1)
- 48.4 mm(1)
- 48.6 mm(1)
- 49.0 mm(1)
- 49.3 mm(1)
- 49.4 mm(1)
- 49.7 mm(1)
- 50.3 mm(1)
- 50.5 mm(2)
- 50.8 mm(1)
- 51.7 mm(2)
- 52.4 mm(1)
- 52.7 mm(1)
- 53.1 mm(1)
- 53.3 mm(1)
- 53.7 mm(1)
- 54.6 mm(1)
- 56.2 mm(1)
- 56.7 mm(1)
- 57.6 mm(1)
- 59.0 mm(1)
- 59.4 mm(1)
- 59.7 mm(1)
- 61.7 mm(1)
- 63.0 mm(1)
- 64.1 mm(1)
- 64.4 mm(1)
- 65.6 mm(1)
- 66.2 mm(2)
- 66.9 mm(1)
- 68.2 mm(2)
- 69.5 mm(1)
- 72.4 mm(2)
- 76.5 mm(1)
to
Connection Style
Connection Style
- BF Drill Shank (111)
- Straight-Cylindrical (29)
- Whistle Notch 2 (17)
Number of Flutes
Number of Flutes
- 1 (21)
- 2 (136)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 0.0 (18)
- 1.0 (66)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 2.1654 in(8)
- 2.4409 in(7)
- 2.441 in(1)
- 2.598 in(1)
- 2.5984 in(9)
- 2.913 in(1)
- 2.9134 in(11)
- 3.11 in(1)
- 3.1102 in(7)
- 3.1496 in(1)
- 3.2283 in(1)
- 3.307 in(1)
- 3.3071 in(10)
- 3.4449 in(12)
- 3.5039 in(7)
- 3.5827 in(1)
- 3.7008 in(1)
- 3.7402 in(9)
- 3.8307 in(8)
- 3.831 in(1)
- 4.0157 in(12)
- 4.1142 in(1)
- 4.2126 in(3)
- 4.311 in(1)
- 4.3701 in(3)
- 4.4488 in(1)
- 4.5276 in(5)
- 4.6063 in(2)
- 4.622 in(6)
- 4.6457 in(2)
- 4.7441 in(1)
- 4.7638 in(2)
- 4.8425 in(1)
- 5.0039 in(9)
- 5.0157 in(8)
- 5.1417 in(1)
- 5.2165 in(1)
to
Over All Length [L]
Over All Length [L]
- 55.0 mm(8)
- 62.0 mm(8)
- 66.0 mm(10)
- 74.0 mm(12)
- 79.0 mm(8)
- 80.0 mm(1)
- 82.0 mm(1)
- 84.0 mm(11)
- 87.5 mm(12)
- 89.0 mm(7)
- 91.0 mm(1)
- 94.0 mm(1)
- 95.0 mm(9)
- 97.3 mm(9)
- 102.0 mm(12)
- 104.5 mm(1)
- 107.0 mm(3)
- 109.5 mm(1)
- 111.0 mm(3)
- 113.0 mm(1)
- 115.0 mm(5)
- 117.0 mm(2)
- 117.4 mm(6)
- 118.0 mm(2)
- 120.5 mm(1)
- 121.0 mm(2)
- 123.0 mm(1)
- 127.1 mm(9)
- 127.4 mm(8)
- 130.6 mm(1)
- 132.5 mm(1)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(20)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(20)
to
Application
Coating
Coating
- TiN (11)
- TiN/TiAlN (78)
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (54)
- KC7315 (65)
- KC7410 (10)
- KCP15 (18)
- KCPM45 (8)
- KCU15 (87)
- KM1 (25)
- KMF (49)
Hand Of Tool
Hand Of Tool
- R (157)
Drill Type
Drill Type
- 81-01 Solid Drill (96)
- 86-01 Indexable Drill (13)
- 86-09 Indexable Countersinking Tool (48)
Wiper Insert
Wiper Insert
- N (20)
Countersunk Angle
Countersunk Angle
- 30.0 (50)
- 41.0 (48)
- 45.0 (54)
to
Front-End
Cutting Width
Cutting Width
- 0.2283 in(1)
- 0.2402 in(1)
- 0.3858 in(2)
to
Cutting Width
Cutting Width
- 5.8 mm(1)
- 6.1 mm(1)
- 9.8 mm(2)
to
Insert Shape
Insert Shape
- COUNTERBORE/COUNTERSINK MISC (66)
- KENTIP DRILL (18)
Point Angle
Point Angle
- 135.0 (98)
- 140.0 (13)
- 180.0 (6)
to
Insert Geometry
Shape
Shape
- COUNTERBORE/COUNTERSINK MISC (20)
Cutting Tool Material
Cutting Tool Material
- H W (20)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (157)
Back-End Diameter
Back-End Diameter
- 4.0 mm(8)
- 5.0 mm(8)
- 6.0 mm(10)
- 7.0 mm(12)
- 8.0 mm(9)
- 9.0 mm(13)
- 10.0 mm(7)
- 11.0 mm(11)
- 12.0 mm(9)
- 13.0 mm(4)
- 14.0 mm(4)
- 15.0 mm(7)
- 16.0 mm(5)
- 17.0 mm(2)
- 18.0 mm(2)
- 19.05 mm(5)
- 20.0 mm(16)
- 25.4 mm(5)
- 31.75 mm(3)
- 32.0 mm(17)
to
Back-End Diameter
Back-End Diameter
- 0.1575 in(8)
- 0.1969 in(8)
- 0.2362 in(10)
- 0.2756 in(12)
- 0.315 in(9)
- 0.3543 in(13)
- 0.3937 in(7)
- 0.4331 in(11)
- 0.4724 in(9)
- 0.5118 in(4)
- 0.5512 in(4)
- 0.5906 in(7)
- 0.6299 in(5)
- 0.6693 in(2)
- 0.7087 in(2)
- 0.75 in(5)
- 0.7874 in(16)
- 1.0 in(5)
- 1.25 in(3)
- 1.2598 in(17)
to
No filters matching ""
