KM™ Systems
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (1349)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1349)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(1349)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(1349)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(1349)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(1349)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(1349)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(1349)
- M Stainless Steel (1338)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(1338)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(1338)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(1338)
- K Cast Iron (1378)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(1378)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(1378)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(1378)
- N Non-Ferrous Materials (1318)
- N1Wrought Aluminum (1315)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(1314)
- N3High-Silicon Aluminum Alloys Si >12.2%(847)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (1318)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (1314)
- N6Carbon, Graphite Composites, CFRP (1310)
- N7MMC's (1172)
- S High-Temp Alloys (1358)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(1356)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(1358)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(1356)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(1335)
- H Hardened Materials (1086)
- H1Hardened Materials 44-48 HRC(1086)
- H2Hardened Materials 48-55 HRC(1086)
- H3Hardened Materials 56-60 HRC(1073)
- H4Hardened Materials >60 HRC(1008)
- C CFRP Materials (1068)
- C1CFRP, CFRP / CFRP (1064)
- C2CFRP / Aluminium CFRP / Non-Ferrous (949)
Applications
Applications
Chamfer Turning (44)
Convex Drilling (3)
Cut-Off (69)
Deep Grooving (41)
Drilling (3)
Face Grooving (41)
Facing (752)
Grooving (191)
ID Facing (6)
ID Grooving (74)
ID Thread Turning (128)
Inclined Entry Drilling (3)
Inclined Exit Drilling (3)
Multiple Direction Cutting (899)
OD Thread Turning (158)
Plunge Turning (50)
Profiling (774)
TRN Boring (712)
Turning (994)
X-Offset Drilling (3)
Cutting Diameter
Cutting Diameter
- 0.625 in(1)
- 0.75 in(1)
- 0.8125 in(1)
- 0.875 in(1)
- 0.9375 in(1)
- 1.125 in(1)
- 1.25 in(1)
- 1.375 in(1)
- 1.5 in(1)
- 1.625 in(1)
- 1.75 in(1)
- 1.875 in(1)
- 2.0 in(1)
to
Cutting Diameter
Cutting Diameter
- 15.875 mm(1)
- 19.05 mm(1)
- 20.638 mm(1)
- 22.225 mm(1)
- 23.812 mm(1)
- 28.575 mm(1)
- 31.75 mm(1)
- 34.925 mm(1)
- 38.1 mm(1)
- 41.275 mm(1)
- 44.45 mm(1)
- 47.625 mm(1)
- 50.8 mm(1)
to
Cutting Condition Material
Cutting Condition Material
- H-All (1074)
- K-All (1236)
- K1 (259)
- M-All (1233)
- N-All (1177)
- P-All (1261)
- S-All (1232)
- S2 (693)
- S4 (373)
Type of Thread
Type of Thread
- 55 (62)
- 60 (196)
- ACME (118)
- API (92)
- API BUTTRESS (13)
- API RD (94)
- BSPT (30)
- BSW (118)
- BUTTRESS (125)
- M (97)
- NPT (96)
- NPTF (30)
- RD DIN 405 (47)
- STUB ACME (101)
- TR DIN 103 (55)
- UN (180)
- UNJ (96)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (1267)
- Lightly Interrupted Cut (1288)
- Smooth Cut (1289)
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 47.625 mm(1)
- 57.15 mm(1)
- 61.912 mm(1)
- 66.675 mm(1)
- 71.438 mm(1)
- 85.725 mm(1)
- 95.25 mm(1)
- 104.775 mm(1)
- 114.3 mm(1)
- 123.825 mm(1)
- 133.35 mm(1)
- 142.875 mm(1)
- 152.4 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 1.875 in(1)
- 2.25 in(1)
- 2.4375 in(1)
- 2.625 in(1)
- 2.8125 in(1)
- 3.375 in(1)
- 3.75 in(1)
- 4.125 in(1)
- 4.5 in(1)
- 4.875 in(1)
- 5.25 in(1)
- 5.625 in(1)
- 6.0 in(1)
to
Reach
Reach
- 2.5197 in(1)
- 2.9921 in(1)
- 3.189 in(1)
- 3.3858 in(1)
- 3.5433 in(1)
- 4.2126 in(1)
- 4.6063 in(1)
- 5.0787 in(1)
- 5.4724 in(1)
- 6.2205 in(1)
- 6.5748 in(1)
- 7.1654 in(1)
- 7.5197 in(1)
to
Reach
Reach
- 64.0 mm(1)
- 76.0 mm(1)
- 81.0 mm(1)
- 86.0 mm(1)
- 90.0 mm(1)
- 107.0 mm(1)
- 117.0 mm(1)
- 129.0 mm(1)
- 139.0 mm(1)
- 158.0 mm(1)
- 167.0 mm(1)
- 182.0 mm(1)
- 191.0 mm(1)
to
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (65)
- 48.0 (14)
- 49.783 (3)
- 50.0 (3)
- 61.0 (2)
- 62.5 (20)
- 63.0 (8)
- 72.5 (3)
- 75.0 (143)
- 85.0 (4)
- 90.0 (387)
- 93.0 (354)
- 95.0 (338)
- 107.5 (82)
to
Connection Style
Connection Style
- Cutoff Support Blade A1-A3 (3)
- KM (996)
Number of Flutes
Number of Flutes
- 2 (13)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (845)
- 2.0 (917)
- 3.0 (258)
- 4.0 (779)
- 6.0 (130)
- 8.0 (372)
to
Over All Length [L]
Over All Length [L]
- 0.5906 in(6)
- 0.591 in(1)
- 0.787 in(34)
- 0.7874 in(54)
- 0.7973 in(1)
- 0.9843 in(49)
- 0.992 in(2)
- 1.181 in(14)
- 1.1811 in(143)
- 1.378 in(50)
- 1.5748 in(53)
- 1.575 in(84)
- 1.7717 in(18)
- 1.772 in(22)
- 1.811 in(6)
- 1.85 in(5)
- 1.8504 in(3)
- 1.9685 in(68)
- 1.969 in(126)
- 2.165 in(1)
- 2.283 in(3)
- 2.362 in(153)
- 2.3622 in(99)
- 2.7559 in(72)
- 2.756 in(90)
- 3.1496 in(32)
- 3.516 in(1)
- 3.543 in(2)
- 3.5433 in(49)
- 3.819 in(2)
- 3.937 in(41)
- 3.94 in(2)
- 4.0 in(9)
- 4.3307 in(40)
- 4.331 in(3)
- 4.528 in(17)
- 4.7244 in(1)
- 4.819 in(2)
- 4.9068 in(1)
- 4.92 in(6)
- 4.921 in(2)
- 4.9213 in(19)
- 5.2818 in(1)
- 5.4693 in(1)
- 5.5118 in(44)
- 5.512 in(12)
- 5.6568 in(1)
- 5.8433 in(1)
- 6.5079 in(1)
- 6.6929 in(4)
- 6.693 in(5)
- 6.8829 in(1)
- 7.3698 in(1)
- 7.7579 in(1)
- 8.4959 in(1)
- 8.8709 in(1)
- 9.4429 in(1)
- 9.8179 in(1)
- 30.0 in(1)
to
Over All Length [L]
Over All Length [L]
- 1.181 mm(1)
- 15.0 mm(7)
- 20.0 mm(88)
- 20.252 mm(1)
- 25.0 mm(49)
- 25.198 mm(2)
- 30.0 mm(157)
- 35.0 mm(50)
- 40.0 mm(137)
- 45.0 mm(40)
- 46.0 mm(6)
- 47.0 mm(8)
- 50.0 mm(194)
- 55.0 mm(1)
- 58.0 mm(3)
- 60.0 mm(252)
- 70.0 mm(162)
- 80.0 mm(32)
- 89.31 mm(1)
- 90.0 mm(51)
- 97.0 mm(2)
- 100.0 mm(43)
- 101.6 mm(9)
- 110.0 mm(43)
- 115.0 mm(17)
- 120.0 mm(1)
- 122.4 mm(2)
- 124.634 mm(1)
- 125.0 mm(27)
- 134.159 mm(1)
- 138.921 mm(1)
- 140.0 mm(56)
- 143.684 mm(1)
- 148.421 mm(1)
- 165.3 mm(1)
- 170.0 mm(9)
- 174.825 mm(1)
- 187.194 mm(1)
- 197.05 mm(1)
- 215.795 mm(1)
- 225.32 mm(1)
- 239.849 mm(1)
- 249.374 mm(1)
to
Corner Radius
Corner Radius
- 0.0 in(71)
- 0.001 in(85)
- 0.002 in(176)
- 0.003 in(200)
- 0.004 in(765)
- 0.005 in(57)
- 0.006 in(113)
- 0.007 in(108)
- 0.008 in(865)
- 0.009 in(57)
- 0.01 in(115)
- 0.011 in(51)
- 0.012 in(77)
- 0.013 in(80)
- 0.014 in(188)
- 0.015 in(6)
- 0.016 in(1041)
- 0.017 in(9)
- 0.018 in(80)
- 0.019 in(26)
- 0.02 in(103)
- 0.021 in(7)
- 0.023 in(81)
- 0.024 in(58)
- 0.026 in(3)
- 0.028 in(14)
- 0.03 in(58)
- 0.031 in(1175)
- 0.032 in(3)
- 0.035 in(80)
- 0.036 in(5)
- 0.038 in(3)
- 0.039 in(113)
- 0.041 in(8)
- 0.047 in(1072)
- 0.049 in(99)
- 0.055 in(5)
- 0.059 in(108)
- 0.06 in(9)
- 0.062 in(54)
- 0.063 in(878)
- 0.069 in(99)
- 0.078 in(54)
- 0.079 in(71)
- 0.08 in(4)
- 0.089 in(54)
- 0.094 in(235)
- 0.098 in(28)
- 0.099 in(2)
- 0.125 in(55)
- 0.126 in(34)
- 0.157 in(29)
- 0.188 in(2)
- 0.197 in(3)
- 0.236 in(4)
- 0.25 in(11)
- 0.315 in(1)
- 0.394 in(3)
- 0.492 in(5)
- 0.63 in(4)
to
Corner Radius
Corner Radius
- 0.0 mm(71)
- 0.025 mm(85)
- 0.05 mm(176)
- 0.075 mm(200)
- 0.1 mm(765)
- 0.125 mm(57)
- 0.15 mm(113)
- 0.175 mm(108)
- 0.2 mm(865)
- 0.225 mm(57)
- 0.25 mm(115)
- 0.275 mm(51)
- 0.3 mm(77)
- 0.325 mm(80)
- 0.35 mm(188)
- 0.375 mm(6)
- 0.4 mm(1041)
- 0.425 mm(9)
- 0.45 mm(80)
- 0.475 mm(26)
- 0.5 mm(103)
- 0.525 mm(7)
- 0.575 mm(81)
- 0.6 mm(58)
- 0.65 mm(3)
- 0.7 mm(14)
- 0.75 mm(58)
- 0.775 mm(99)
- 0.8 mm(1076)
- 0.825 mm(3)
- 0.9 mm(80)
- 0.925 mm(5)
- 0.975 mm(3)
- 1.0 mm(113)
- 1.05 mm(8)
- 1.2 mm(1072)
- 1.25 mm(99)
- 1.4 mm(5)
- 1.5 mm(108)
- 1.525 mm(9)
- 1.575 mm(54)
- 1.6 mm(878)
- 1.75 mm(99)
- 1.975 mm(54)
- 2.0 mm(71)
- 2.025 mm(4)
- 2.25 mm(54)
- 2.375 mm(57)
- 2.4 mm(231)
- 2.5 mm(28)
- 2.525 mm(2)
- 3.175 mm(55)
- 3.2 mm(34)
- 4.0 mm(29)
- 4.775 mm(2)
- 5.0 mm(3)
- 6.0 mm(4)
- 6.35 mm(11)
- 8.0 mm(1)
- 10.0 mm(3)
- 12.5 mm(5)
- 16.0 mm(4)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- C3 (6)
- CBN6 (6)
- CG5 (53)
- CG6 (18)
- CM1 (18)
- CS5 (12)
- CW2015 (508)
- CW3020 (15)
- CW5025 (346)
- HCK10 (10)
- HWK10 (4)
- K00326 (29)
- K060 (141)
- K090 (97)
- K1 (28)
- K313 (1068)
- K420 (126)
- K6 (5)
- K68 (901)
- K8735 (29)
- KB1340 (262)
- KB1345 (368)
- KB1610 (531)
- KB1630 (473)
- KB5610 (396)
- KB5630 (409)
- KB9640 (11)
- KBH10 (657)
- KBH10B (433)
- KBH20 (789)
- KBH20B (433)
- KBK35 (115)
- KBK45 (11)
- KC5010 (1273)
- KC5020P (16)
- KC5025 (1248)
- KC5410 (939)
- KC7140 (13)
- KC720 (154)
- KC7215 (12)
- KC7225 (12)
- KC730 (956)
- KC7815 (12)
- KC7820 (7)
- KC7845 (5)
- KC7935 (12)
- KC810 (11)
- KC850 (1124)
- KC9110 (13)
- KC9125 (76)
- KC990 (12)
- KCK05 (873)
- KCK05B (370)
- KCK15 (899)
- KCK15B (951)
- KCK20 (1074)
- KCK20B (1026)
- KCM15 (915)
- KCM15B (904)
- KCM25 (1009)
- KCM25B (978)
- KCM25S (55)
- KCM35 (847)
- KCM35B (479)
- KCMS35 (11)
- KCMS40 (1)
- KCP05 (737)
- KCP05B (678)
- KCP10 (1065)
- KCP10B (1146)
- KCP15 (18)
- KCP20S (55)
- KCP25 (1085)
- KCP25B (1196)
- KCP25C (1091)
- KCP30 (941)
- KCP30B (586)
- KCP40 (684)
- KCP40B (747)
- KCPK05 (746)
- KCPK10 (13)
- KCS10 (376)
- KCS10B (967)
- KCS25S (55)
- KCU10 (1208)
- KCU10B (1217)
- KCU25 (1198)
- KCU25B (1204)
- KCU40 (13)
- KD1400 (529)
- KD1405 (388)
- KD1425 (667)
- KMF (16)
- KMS (9)
- KN10S (71)
- KS15 (170)
- KT315 (982)
- KT325 (253)
- KTP10 (785)
- KTP25S (610)
- KU40D (12)
- KY1540 (160)
- KY1615 (123)
- KY3500 (723)
- KY4300 (333)
- KY4400 (674)
- KYHK15B (693)
- KYK10 (360)
- KYK25 (483)
- KYS25 (229)
- KYS30 (406)
- PB100 (129)
- PB250 (10)
- PN120 (13)
- SP4019 (177)
- THM (509)
- THM-X (329)
- THMF-X (215)
- TN10P (659)
- TN10U (543)
- TN15M (480)
- TN15U (387)
- TN2000 (515)
- TN20K (681)
- TN20P (774)
- TN30M (534)
- TN30P (464)
- TN4000 (474)
- TN6010 (386)
- TN6025 (247)
- TN7 (6)
- TTM09 (4)
- TTR (29)
- TTR-X (28)
- TTS (253)
- W00160 (7)
- W00162 (19)
- WBH10P (337)
- WBH10U (177)
- WBH20P (571)
- WBH30P (396)
- WBK40U (57)
- WBK45U (103)
- WDN00U (283)
- WDN10U (6)
- WDN25U (479)
- WK05CT (704)
- WK15CT (485)
- WK20CT (848)
- WM15CT (735)
- WM25CT (832)
- WM35CT (578)
- WP05CT (183)
- WP15CT (882)
- WP20TT (40)
- WP25CT (882)
- WP35CT (696)
- WS10PT (735)
- WS25PT (747)
- WU05PT (84)
- WU10HT (773)
- WU10PT (610)
- WU25PT (577)
- X00580 (141)
- X00581 (141)
- X00582 (141)
- X00583 (141)
- X00584 (141)
- X00585 (141)
- X00586 (141)
- X00591 (141)
- X00592 (141)
- X00593 (141)
- X00594 (141)
- X00596 (141)
- X00597 (141)
- X00599 (141)
Hand Of Tool
Hand Of Tool
- L (452)
- N (52)
- N - Neutral (3)
- R (492)
Drill Type
Drill Type
- 86-01 Indexable Drill (13)
Wiper Insert
Wiper Insert
- N (1366)
- Y (548)
Drilling Condition Material
Drilling Condition Material
- K1 (13)
- K2 (13)
- K3 (13)
- M1 (13)
- M2 (13)
- M3 (13)
- N1 (13)
- N2 (13)
- N3 (13)
- N4 (13)
- N5 (13)
- N6 (13)
- N7 (13)
- P0 (13)
- P1 (13)
- P2 (13)
- P3 (13)
- P4 (13)
- P5 (13)
- P6 (13)
- S1 (13)
- S2 (13)
- S3 (13)
- S4 (13)
F Dimension
F Dimension
- 0.0 mm(54)
- 1.7 mm(1)
- 2.0 mm(2)
- 4.0 mm(1)
- 5.0 mm(1)
- 5.75 mm(3)
- 5.79 mm(3)
- 7.0 mm(15)
- 7.35 mm(3)
- 7.52 mm(2)
- 7.53 mm(1)
- 8.0 mm(48)
- 8.05 mm(2)
- 8.5 mm(2)
- 9.0 mm(19)
- 10.0 mm(78)
- 11.0 mm(31)
- 12.5 mm(36)
- 13.0 mm(32)
- 16.0 mm(38)
- 17.0 mm(92)
- 22.0 mm(128)
- 24.0 mm(13)
- 25.3 mm(1)
- 27.0 mm(129)
- 28.5 mm(2)
- 30.0 mm(18)
- 32.0 mm(2)
- 35.0 mm(66)
- 38.0 mm(18)
- 43.0 mm(62)
- 48.0 mm(17)
- 53.0 mm(49)
- 59.0 mm(2)
to
F Dimension
F Dimension
- 0.0 in(54)
- 0.0669 in(1)
- 0.0787 in(2)
- 0.1575 in(1)
- 0.1969 in(1)
- 0.2264 in(3)
- 0.228 in(3)
- 0.2756 in(14)
- 0.276 in(1)
- 0.289 in(3)
- 0.2961 in(2)
- 0.2965 in(1)
- 0.315 in(48)
- 0.3169 in(2)
- 0.3346 in(2)
- 0.354 in(4)
- 0.3543 in(15)
- 0.3937 in(57)
- 0.394 in(21)
- 0.4331 in(31)
- 0.4921 in(36)
- 0.5118 in(30)
- 0.512 in(2)
- 0.6299 in(37)
- 0.63 in(1)
- 0.669 in(11)
- 0.6693 in(81)
- 0.866 in(18)
- 0.8661 in(110)
- 0.9449 in(12)
- 0.945 in(1)
- 0.9961 in(1)
- 1.063 in(129)
- 1.122 in(2)
- 1.181 in(2)
- 1.1811 in(16)
- 1.2598 in(2)
- 1.378 in(66)
- 1.496 in(1)
- 1.4961 in(17)
- 1.6929 in(52)
- 1.693 in(10)
- 1.8898 in(16)
- 1.89 in(1)
- 2.0866 in(41)
- 2.087 in(8)
- 2.3228 in(1)
- 2.323 in(1)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 mm(51)
- 11.1 mm(3)
- 11.15 mm(3)
- 13.0 mm(15)
- 14.25 mm(3)
- 16.0 mm(19)
- 18.5 mm(5)
- 20.0 mm(26)
- 25.0 mm(37)
- 32.0 mm(87)
- 34.0 mm(6)
- 40.0 mm(89)
- 41.3 mm(20)
- 44.0 mm(18)
- 47.6 mm(20)
- 50.0 mm(87)
- 54.0 mm(51)
- 56.625 mm(20)
- 57.2 mm(11)
- 60.0 mm(2)
- 63.0 mm(32)
- 64.0 mm(2)
- 70.0 mm(54)
- 74.0 mm(4)
- 80.0 mm(59)
- 86.0 mm(91)
- 88.9 mm(40)
- 90.0 mm(6)
- 94.0 mm(2)
- 100.0 mm(46)
- 104.0 mm(2)
- 106.0 mm(71)
- 118.0 mm(2)
- 120.0 mm(3)
- 139.7 mm(20)
- 150.0 mm(1)
- 174.6 mm(20)
- 209.6 mm(11)
- 222.3 mm(11)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.0 in(51)
- 0.437 in(3)
- 0.439 in(3)
- 0.5118 in(14)
- 0.512 in(1)
- 0.561 in(3)
- 0.6299 in(15)
- 0.63 in(4)
- 0.7283 in(5)
- 0.7874 in(26)
- 0.984 in(1)
- 0.9843 in(36)
- 1.2598 in(76)
- 1.26 in(11)
- 1.3386 in(6)
- 1.5748 in(78)
- 1.575 in(11)
- 1.626 in(20)
- 1.732 in(17)
- 1.7323 in(1)
- 1.874 in(20)
- 1.9685 in(40)
- 1.969 in(46)
- 2.126 in(51)
- 2.229 in(20)
- 2.252 in(11)
- 2.362 in(2)
- 2.48 in(23)
- 2.4803 in(10)
- 2.5197 in(2)
- 2.756 in(54)
- 2.913 in(4)
- 3.15 in(59)
- 3.386 in(91)
- 3.5 in(40)
- 3.543 in(6)
- 3.701 in(2)
- 3.937 in(46)
- 4.094 in(2)
- 4.173 in(71)
- 4.6457 in(1)
- 4.646 in(1)
- 4.724 in(2)
- 4.7244 in(1)
- 5.5 in(20)
- 5.906 in(1)
- 6.874 in(20)
- 8.252 in(11)
- 8.752 in(11)
- 27.0 in(1)
- 28.0 in(3)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 1.0236 in(2)
- 1.063 in(2)
- 1.2598 in(10)
- 393.661 in(129)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 26.0 mm(2)
- 27.0 mm(2)
- 32.0 mm(10)
- 9999.0 mm(129)
to
Cutting Direction
Cutting Direction
- B (233)
- E (250)
- P (2)
- S (500)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (522)
- DOUBLE POSITIVE (4)
- NEGATIVE-ZERO (74)
- NEUTRAL (ZERO) (305)
- POSITIVE-NEGATIVE (1)
- POSITIVE-ZERO (40)
Maximum Bore Depth
Maximum Bore Depth
- 1.378 in(30)
- 1.3842 in(2)
- 1.3843 in(3)
- 1.3854 in(2)
- 1.43 in(1)
- 1.5079 in(2)
- 1.508 in(1)
- 1.575 in(82)
- 1.6142 in(6)
- 1.6535 in(2)
- 1.6539 in(2)
- 1.654 in(1)
- 1.6547 in(2)
- 1.6618 in(7)
- 1.664 in(2)
- 1.701 in(2)
- 1.772 in(19)
- 1.9378 in(2)
- 1.968 in(2)
- 1.9685 in(2)
- 1.969 in(108)
- 1.986 in(2)
- 2.0394 in(3)
- 2.165 in(1)
- 2.1689 in(15)
- 2.2047 in(2)
- 2.209 in(3)
- 2.2091 in(8)
- 2.211 in(2)
- 2.2835 in(4)
- 2.362 in(139)
- 2.3622 in(7)
- 2.3807 in(2)
- 2.381 in(2)
- 2.444 in(3)
- 2.756 in(80)
- 2.7567 in(10)
- 2.757 in(2)
- 2.7602 in(2)
- 2.7685 in(4)
- 2.77 in(1)
- 2.774 in(2)
- 2.7744 in(4)
- 2.9528 in(2)
- 2.953 in(1)
- 2.954 in(1)
- 2.9543 in(16)
- 2.9929 in(8)
- 3.037 in(4)
- 3.0445 in(8)
- 3.132 in(1)
- 3.1496 in(6)
- 3.15 in(7)
- 3.151 in(2)
- 3.1992 in(2)
- 3.2 in(2)
- 3.434 in(4)
- 3.4343 in(4)
- 3.445 in(4)
- 3.4689 in(2)
- 3.474 in(8)
- 3.476 in(4)
- 3.485 in(2)
- 3.5929 in(1)
- 3.593 in(3)
- 3.594 in(2)
- 3.7803 in(12)
- 3.7898 in(3)
- 3.79 in(5)
- 3.908 in(1)
- 3.937 in(8)
- 4.11 in(4)
- 4.412 in(10)
- 4.4122 in(2)
- 4.418 in(2)
- 4.464 in(1)
- 4.528 in(17)
- 4.612 in(10)
- 4.621 in(1)
- 4.7244 in(2)
- 4.7252 in(4)
- 4.7378 in(7)
- 4.738 in(6)
- 5.5118 in(4)
- 5.866 in(1)
- 5.882 in(7)
to
Maximum Bore Depth
Maximum Bore Depth
- 35.0 mm(30)
- 35.16 mm(5)
- 35.19 mm(2)
- 36.33 mm(1)
- 38.3 mm(3)
- 40.0 mm(82)
- 41.0 mm(6)
- 42.0 mm(3)
- 42.01 mm(2)
- 42.03 mm(2)
- 42.21 mm(7)
- 42.27 mm(2)
- 43.21 mm(2)
- 45.0 mm(19)
- 49.22 mm(2)
- 50.0 mm(112)
- 50.45 mm(2)
- 51.8 mm(3)
- 55.0 mm(1)
- 55.09 mm(15)
- 56.0 mm(2)
- 56.11 mm(11)
- 56.16 mm(2)
- 58.0 mm(4)
- 60.0 mm(146)
- 60.47 mm(4)
- 62.07 mm(3)
- 70.0 mm(80)
- 70.02 mm(12)
- 70.11 mm(2)
- 70.32 mm(4)
- 70.36 mm(1)
- 70.47 mm(6)
- 75.0 mm(3)
- 75.04 mm(17)
- 76.02 mm(8)
- 77.14 mm(4)
- 77.33 mm(8)
- 79.55 mm(1)
- 80.0 mm(13)
- 80.04 mm(2)
- 81.26 mm(4)
- 87.23 mm(8)
- 87.5 mm(4)
- 88.11 mm(2)
- 88.23 mm(8)
- 88.29 mm(2)
- 88.3 mm(2)
- 88.52 mm(2)
- 91.26 mm(4)
- 91.28 mm(2)
- 96.02 mm(12)
- 96.26 mm(8)
- 99.25 mm(1)
- 100.0 mm(8)
- 104.4 mm(4)
- 112.07 mm(12)
- 112.22 mm(2)
- 113.37 mm(1)
- 115.0 mm(17)
- 117.14 mm(10)
- 117.38 mm(1)
- 120.0 mm(2)
- 120.02 mm(4)
- 120.34 mm(13)
- 140.0 mm(4)
- 149.4 mm(8)
to
Boring Bar Material
Boring Bar Material
- C (7)
- S (361)
Front-End
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (89)
- CARTRIDGE MOUNT (47)
- COMBI SHELL ADAPTER (19)
- CUTOFF SUPPORT BLADE (22)
- DRILL CHUCK ADAPTER (4)
- DRILL SHANK 2 FLATS (8)
- END MILL ADAPTER (81)
- ER COLLET CHUCK (42)
- EXTENSION (15)
- HYDRAULIC CHUCK (33)
- HYDRAULIC CHUCK-HIGH TORQUE (4)
- HYDRAULIC CHUCK-SLIM LINE (15)
- KM MODULAR ADAPTER (67)
- KM MODULAR ADAPTER-4 UNITS (2)
- RC TAP CHUCK ADAPTER-T & C (2)
- REDUCER (41)
- SCREW-ON ADAPTER (16)
- SHELL MILL ADAPTER (65)
- SHRINK FIT ADAPTER (48)
- SQUARE SHANK ADAPTER (48)
- SQUARE SHANK ADAPTER-2 SLOTS (2)
- SQUARE SHANK ADAPTER-4 SLOTS (1)
- TAP CHUCK ADAPTER (4)
- WHISTLE DRIVE ADAPTER (3)
- WHISTLE NOTCH ADAPTER (39)
Clamp Style
Clamp Style
- C (28)
- D (119)
- M (470)
- N (180)
- P (242)
- S (319)
- W (2)
- Y (64)
Cutting Width
Cutting Width
- 0.0197 in(45)
- 0.031 in(45)
- 0.0315 in(45)
- 0.035 in(22)
- 0.039 in(45)
- 0.0394 in(99)
- 0.041 in(45)
- 0.047 in(99)
- 0.0472 in(99)
- 0.055 in(45)
- 0.0551 in(45)
- 0.058 in(45)
- 0.059 in(7)
- 0.0591 in(99)
- 0.061 in(1)
- 0.062 in(99)
- 0.063 in(1)
- 0.0669 in(45)
- 0.067 in(45)
- 0.0689 in(99)
- 0.072 in(54)
- 0.076 in(23)
- 0.0768 in(45)
- 0.077 in(23)
- 0.078 in(62)
- 0.0787 in(99)
- 0.079 in(79)
- 0.084 in(8)
- 0.0866 in(99)
- 0.087 in(2)
- 0.088 in(99)
- 0.0886 in(73)
- 0.094 in(102)
- 0.097 in(54)
- 0.098 in(3)
- 0.0984 in(99)
- 0.103 in(3)
- 0.105 in(54)
- 0.108 in(45)
- 0.1083 in(99)
- 0.11 in(54)
- 0.118 in(85)
- 0.1181 in(125)
- 0.119 in(9)
- 0.12 in(9)
- 0.122 in(63)
- 0.123 in(9)
- 0.125 in(134)
- 0.126 in(76)
- 0.1278 in(45)
- 0.128 in(54)
- 0.129 in(23)
- 0.131 in(26)
- 0.1378 in(125)
- 0.142 in(54)
- 0.147 in(22)
- 0.151 in(45)
- 0.156 in(54)
- 0.157 in(58)
- 0.1574 in(67)
- 0.1575 in(84)
- 0.158 in(4)
- 0.161 in(4)
- 0.162 in(4)
- 0.167 in(26)
- 0.1673 in(54)
- 0.1771 in(80)
- 0.1772 in(80)
- 0.178 in(54)
- 0.185 in(54)
- 0.187 in(4)
- 0.1875 in(4)
- 0.188 in(80)
- 0.189 in(80)
- 0.192 in(26)
- 0.193 in(26)
- 0.195 in(54)
- 0.196 in(54)
- 0.1969 in(26)
- 0.197 in(15)
- 0.198 in(2)
- 0.201 in(2)
- 0.202 in(2)
- 0.213 in(26)
- 0.2165 in(13)
- 0.2166 in(13)
- 0.2362 in(26)
- 0.25 in(27)
- 0.256 in(26)
- 0.281 in(2)
- 0.312 in(2)
- 0.375 in(1)
- 0.381 in(3)
- 0.384 in(2)
to
Cutting Width
Cutting Width
- 0.5 mm(45)
- 0.787 mm(45)
- 0.8 mm(45)
- 0.889 mm(22)
- 0.991 mm(45)
- 1.0 mm(99)
- 1.041 mm(45)
- 1.19 mm(73)
- 1.194 mm(99)
- 1.2 mm(99)
- 1.39 mm(45)
- 1.397 mm(22)
- 1.4 mm(45)
- 1.473 mm(45)
- 1.49 mm(7)
- 1.5 mm(106)
- 1.55 mm(1)
- 1.57 mm(77)
- 1.575 mm(99)
- 1.6 mm(1)
- 1.69 mm(22)
- 1.7 mm(45)
- 1.702 mm(45)
- 1.75 mm(99)
- 1.829 mm(54)
- 1.94 mm(23)
- 1.95 mm(45)
- 1.956 mm(23)
- 1.981 mm(54)
- 1.99 mm(8)
- 2.0 mm(107)
- 2.007 mm(45)
- 2.13 mm(8)
- 2.2 mm(101)
- 2.235 mm(76)
- 2.236 mm(26)
- 2.24 mm(45)
- 2.25 mm(73)
- 2.38 mm(3)
- 2.387 mm(26)
- 2.388 mm(102)
- 2.39 mm(28)
- 2.464 mm(54)
- 2.49 mm(3)
- 2.5 mm(102)
- 2.62 mm(3)
- 2.667 mm(54)
- 2.74 mm(23)
- 2.743 mm(22)
- 2.75 mm(99)
- 2.794 mm(54)
- 2.997 mm(76)
- 3.0 mm(134)
- 3.05 mm(9)
- 3.099 mm(54)
- 3.1 mm(9)
- 3.11 mm(9)
- 3.12 mm(9)
- 3.13 mm(9)
- 3.17 mm(54)
- 3.175 mm(134)
- 3.18 mm(45)
- 3.2 mm(76)
- 3.245 mm(45)
- 3.25 mm(54)
- 3.251 mm(26)
- 3.27 mm(23)
- 3.32 mm(26)
- 3.329 mm(26)
- 3.5 mm(125)
- 3.607 mm(54)
- 3.73 mm(22)
- 3.835 mm(22)
- 3.84 mm(45)
- 3.96 mm(54)
- 3.962 mm(54)
- 3.974 mm(26)
- 3.988 mm(54)
- 4.0 mm(84)
- 4.1 mm(4)
- 4.11 mm(4)
- 4.12 mm(4)
- 4.242 mm(26)
- 4.25 mm(54)
- 4.5 mm(80)
- 4.521 mm(54)
- 4.699 mm(54)
- 4.76 mm(4)
- 4.762 mm(4)
- 4.775 mm(80)
- 4.78 mm(13)
- 4.785 mm(13)
- 4.788 mm(13)
- 4.8 mm(54)
- 4.801 mm(80)
- 4.88 mm(26)
- 4.9 mm(26)
- 4.95 mm(54)
- 4.953 mm(26)
- 4.978 mm(54)
- 5.0 mm(28)
- 5.004 mm(13)
- 5.1 mm(2)
- 5.12 mm(2)
- 5.13 mm(2)
- 5.41 mm(26)
- 5.5 mm(26)
- 6.0 mm(26)
- 6.35 mm(27)
- 6.36 mm(13)
- 6.502 mm(26)
- 7.137 mm(2)
- 7.925 mm(2)
- 9.525 mm(1)
- 9.677 mm(3)
- 9.754 mm(2)
to
Front End Type
Front End Type
- BKA - Boring Head Adapter (7)
- FDA - Milling Cutter Arbor (77)
- KMM - KM Micro System (46)
- KMS - KM TBD System (21)
- KMT - KM Adapter (51)
- MCS - Modular Cartridge System (47)
- PMK - Prismatic Adapter Kenna (22)
- SPK-Holding Arbor-Spindle Head (7)
- SWB - Tap Chuck Adapter (6)
- SZK - Collet Taper (42)
- VKT - Square Shank (51)
- ZYL - Cylindrical Adapter (348)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (320)
- D-DIAMOND/RHOMBIC 55 (330)
- LT-TRIANGLE LAY DOWN THREAD 60 (84)
- N/K-PARALLELOGRAM 55 (4)
- ON EDGE MISC (2)
- PRISMATIC (64)
- R-ROUND (34)
- S-SQUARE 90 (153)
- T-TRIANGLE 60 (115)
- TN-TOP NOTCH (130)
- V-DIAMOND/RHOMBIC 35 (115)
- W-TRIGON 80 (75)
- X-TRIGON 84 (13)
Front End Style
Front End Style
- BKA01 Intchg Heads (H) Pilot (7)
- FDA03 Longit &Transver Drive (2)
- FDA12 Transv Drive&CutRetScr (10)
- FDA13 Long&TranDrv&CutRetScr (10)
- FDA22 Transv Drive & SHCS (44)
- FDA23 Longit&Transv Drv&SHCS (7)
- FDA42TranDrvw/CtrScrwORBoltCir (4)
- KMM01 Std Km-Micro Size (16)
- KMM02 Enlarged Flange (22)
- KMS-01 Std KM-TBD NotOnCntr (8)
- KMS-02 Englarged Flange OnCntr (13)
- KMT00 All KM, except 02,05,09 (51)
- MCS01 Modular Deep Grooving (47)
- PMK02 Cutoff Sup Bld A1-A3 (14)
- PMK03 CutOffBld A1-A3 Hlfw/Pin (8)
- SPK02 Bolt Circ Dia 101.6 mm (7)
- SWB-01 WFL#...WES#(Bilz) (6)
- SZK02 Collets 8 Degree Taper (42)
- VKT01 Std Design (51)
- ZYL01 Straight Shank (105)
- ZYL03 Attachment Thread (16)
- ZYL10 Weldon Shank (71)
- ZYL13 2Deg-Whistle Notch (39)
- ZYL14 Weldon+Whistle Notch (10)
- ZYL22 Boring Bar Shank (96)
- ZYL56 2Plain Clamp Surf w/Pcs (8)
- ZYL63 2Deg Surf w/Cyl.w/drive (3)
Insert Size
Insert Size
- 1 (11)
- 1B (4)
- 1F (4)
- 2 (61)
- 2B (3)
- 3 (71)
- 4 (30)
- 5 (5)
- 6 (2)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 in(13)
- 0.1181 in(3)
- 0.1252 in(1)
- 0.138 in(14)
- 0.1382 in(4)
- 0.1772 in(3)
- 0.2098 in(4)
- 0.21 in(23)
- 0.294 in(8)
- 0.3 in(2)
- 0.3543 in(1)
- 0.403 in(2)
- 0.4035 in(1)
- 0.415 in(2)
- 0.4331 in(1)
- 0.5118 in(20)
- 0.5315 in(3)
- 0.532 in(2)
- 0.5512 in(11)
- 0.5708 in(1)
- 0.5709 in(1)
- 0.6299 in(21)
- 0.748 in(1)
- 0.7874 in(1)
- 1.2992 in(1)
- 1.5807 in(2)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 0.0 mm(13)
- 3.0 mm(3)
- 3.18 mm(1)
- 3.51 mm(18)
- 4.5 mm(3)
- 5.33 mm(27)
- 7.47 mm(8)
- 7.61 mm(2)
- 9.0 mm(1)
- 10.25 mm(3)
- 10.54 mm(2)
- 11.0 mm(1)
- 13.0 mm(20)
- 13.5 mm(5)
- 14.0 mm(11)
- 14.5 mm(2)
- 16.0 mm(21)
- 19.0 mm(1)
- 20.0 mm(1)
- 33.0 mm(1)
- 40.15 mm(2)
to
Gage Length
Gage Length
- 4.8000 in(6)
- 14.0000 in(9)
- 16.0000 in(9)
- 17.0000 in(1)
- 18.0000 in(1)
- 20.0000 in(2)
- 23.0000 in(4)
- 23.4000 in(2)
- 25.0000 in(12)
- 26.0000 in(11)
- 28.0000 in(7)
- 28.0120 in(2)
- 28.2860 in(2)
- 30.0000 in(21)
- 31.4450 in(1)
- 32.0000 in(20)
- 35.0000 in(4)
- 35.1820 in(2)
- 35.2500 in(4)
- 36.0000 in(2)
- 37.6000 in(4)
- 38.0000 in(4)
- 38.1000 in(1)
- 38.8990 in(2)
- 40.0000 in(24)
- 42.0000 in(1)
- 43.0000 in(3)
- 44.9600 in(1)
- 45.0000 in(21)
- 45.0500 in(1)
- 46.9000 in(4)
- 47.0000 in(7)
- 48.0000 in(6)
- 48.2500 in(1)
- 49.2000 in(2)
- 50.0000 in(15)
- 50.0500 in(1)
- 50.3000 in(2)
- 51.0000 in(1)
- 53.5000 in(4)
- 55.0000 in(18)
- 55.3000 in(4)
- 57.0000 in(4)
- 57.1500 in(2)
- 58.0000 in(4)
- 58.4000 in(1)
- 58.5000 in(7)
- 59.0000 in(4)
- 60.0000 in(38)
- 63.0000 in(4)
- 63.5000 in(10)
- 65.0000 in(29)
- 66.5000 in(4)
- 70.0000 in(36)
- 70.0500 in(1)
- 75.0000 in(14)
- 75.0500 in(1)
- 76.2000 in(3)
- 77.6000 in(1)
- 78.0000 in(2)
- 78.6900 in(1)
- 80.0000 in(52)
- 82.5500 in(2)
- 84.0000 in(3)
- 85.0000 in(20)
- 85.7250 in(1)
- 88.9000 in(3)
- 89.3100 in(1)
- 90.0000 in(30)
- 95.0000 in(14)
- 95.2500 in(1)
- 97.0000 in(4)
- 99.5500 in(1)
- 99.8000 in(1)
- 99.9000 in(1)
- 100.0000 in(40)
- 101.6000 in(10)
- 103.7000 in(1)
- 104.6000 in(2)
- 105.0000 in(16)
- 109.0000 in(5)
- 110.0000 in(5)
- 110.9000 in(1)
- 114.0000 in(2)
- 114.3000 in(4)
- 115.0000 in(4)
- 115.1000 in(1)
- 120.0000 in(18)
- 122.4000 in(2)
- 123.8000 in(2)
- 125.0000 in(3)
- 127.0000 in(1)
- 130.0000 in(5)
- 134.0000 in(2)
- 134.2900 in(1)
- 134.5500 in(2)
- 137.0000 in(1)
- 139.7000 in(2)
- 140.0000 in(2)
- 147.0000 in(1)
- 150.0000 in(1)
- 152.8000 in(1)
- 160.0000 in(9)
- 165.1000 in(1)
- 170.0000 in(9)
- 187.0000 in(1)
- 207.3300 in(1)
- 215.9000 in(1)
- 230.0000 in(1)
- 234.0000 in(1)
- 234.5500 in(2)
- 243.5600 in(1)
- 283.5000 in(1)
- 310.7100 in(2)
- 334.3100 in(1)
- 359.7300 in(1)
- 361.5200 in(2)
- 385.1100 in(1)
- 386.9200 in(2)
- 412.3200 in(2)
- 486.7300 in(1)
- 513.9200 in(2)
Gage Length
Gage Length
- 4.8000 mm(6)
- 14.0000 mm(9)
- 16.0000 mm(9)
- 17.0000 mm(1)
- 18.0000 mm(1)
- 20.0000 mm(2)
- 23.0000 mm(4)
- 23.4000 mm(2)
- 25.0000 mm(12)
- 26.0000 mm(11)
- 28.0000 mm(7)
- 28.0120 mm(2)
- 28.2860 mm(2)
- 30.0000 mm(21)
- 31.4450 mm(1)
- 32.0000 mm(20)
- 35.0000 mm(4)
- 35.1820 mm(2)
- 35.2500 mm(4)
- 36.0000 mm(2)
- 37.6000 mm(4)
- 38.0000 mm(4)
- 38.1000 mm(1)
- 38.8990 mm(2)
- 40.0000 mm(24)
- 42.0000 mm(1)
- 43.0000 mm(3)
- 44.9600 mm(1)
- 45.0000 mm(21)
- 45.0500 mm(1)
- 46.9000 mm(4)
- 47.0000 mm(7)
- 48.0000 mm(6)
- 48.2500 mm(1)
- 49.2000 mm(2)
- 50.0000 mm(15)
- 50.0500 mm(1)
- 50.3000 mm(2)
- 51.0000 mm(1)
- 53.5000 mm(4)
- 55.0000 mm(18)
- 55.3000 mm(4)
- 57.0000 mm(4)
- 57.1500 mm(2)
- 58.0000 mm(4)
- 58.4000 mm(1)
- 58.5000 mm(7)
- 59.0000 mm(4)
- 60.0000 mm(38)
- 63.0000 mm(4)
- 63.5000 mm(10)
- 65.0000 mm(29)
- 66.5000 mm(4)
- 70.0000 mm(36)
- 70.0500 mm(1)
- 75.0000 mm(14)
- 75.0500 mm(1)
- 76.2000 mm(3)
- 77.6000 mm(1)
- 78.0000 mm(2)
- 78.6900 mm(1)
- 80.0000 mm(52)
- 82.5500 mm(2)
- 84.0000 mm(3)
- 85.0000 mm(20)
- 85.7250 mm(1)
- 88.9000 mm(3)
- 89.3100 mm(1)
- 90.0000 mm(30)
- 95.0000 mm(14)
- 95.2500 mm(1)
- 97.0000 mm(4)
- 99.5500 mm(1)
- 99.8000 mm(1)
- 99.9000 mm(1)
- 100.0000 mm(40)
- 101.6000 mm(10)
- 103.7000 mm(1)
- 104.6000 mm(2)
- 105.0000 mm(16)
- 109.0000 mm(5)
- 110.0000 mm(5)
- 110.9000 mm(1)
- 114.0000 mm(2)
- 114.3000 mm(4)
- 115.0000 mm(4)
- 115.1000 mm(1)
- 120.0000 mm(18)
- 122.4000 mm(2)
- 123.8000 mm(2)
- 125.0000 mm(3)
- 127.0000 mm(1)
- 130.0000 mm(5)
- 134.0000 mm(2)
- 134.2900 mm(1)
- 134.5500 mm(2)
- 137.0000 mm(1)
- 139.7000 mm(2)
- 140.0000 mm(2)
- 147.0000 mm(1)
- 150.0000 mm(1)
- 152.8000 mm(1)
- 160.0000 mm(9)
- 165.1000 mm(1)
- 170.0000 mm(9)
- 187.0000 mm(1)
- 207.3300 mm(1)
- 215.9000 mm(1)
- 230.0000 mm(1)
- 234.0000 mm(1)
- 234.5500 mm(2)
- 243.5600 mm(1)
- 283.5000 mm(1)
- 310.7100 mm(2)
- 334.3100 mm(1)
- 359.7300 mm(1)
- 361.5200 mm(2)
- 385.1100 mm(1)
- 386.9200 mm(2)
- 412.3200 mm(2)
- 486.7300 mm(1)
- 513.9200 mm(2)
Front End Size
Front End Size
- 0.5 in(1)
- 1.0 in(1)
- 2.5 in(1)
- 3.0 in(1)
- 6.0 in(18)
- 6.35 in(3)
- 7.938 in(3)
- 8.0 in(18)
- 9.525 in(12)
- 9.55 in(1)
- 10.0 in(20)
- 11.113 in(1)
- 12.0 in(29)
- 12.7 in(19)
- 14.0 in(10)
- 14.288 in(1)
- 15.875 in(15)
- 16.0 in(36)
- 18.0 in(9)
- 19.027 in(2)
- 19.05 in(26)
- 19.06 in(1)
- 20.0 in(40)
- 20.18 in(1)
- 22.0 in(9)
- 22.225 in(1)
- 25.0 in(28)
- 25.39 in(1)
- 25.4 in(26)
- 25.41 in(1)
- 27.0 in(11)
- 31.0 in(1)
- 31.027 in(2)
- 31.7 in(2)
- 31.74 in(2)
- 31.75 in(21)
- 32.0 in(48)
- 38.09 in(1)
- 38.1 in(15)
- 38.11 in(1)
- 40.0 in(36)
- 44.45 in(1)
- 48.0 in(1)
- 50.0 in(15)
- 50.79 in(1)
- 50.8 in(12)
- 60.0 in(2)
- 63.0 in(10)
- 63.49 in(2)
- 63.5 in(4)
- 80.0 in(4)
to
Front End Size
Front End Size
- 0.5 mm(1)
- 1.0 mm(1)
- 2.5 mm(1)
- 3.0 mm(1)
- 6.0 mm(18)
- 6.35 mm(3)
- 7.938 mm(3)
- 8.0 mm(18)
- 9.525 mm(12)
- 9.55 mm(1)
- 10.0 mm(20)
- 11.113 mm(1)
- 12.0 mm(29)
- 12.7 mm(19)
- 14.0 mm(10)
- 14.288 mm(1)
- 15.875 mm(15)
- 16.0 mm(36)
- 18.0 mm(9)
- 19.027 mm(2)
- 19.05 mm(26)
- 19.06 mm(1)
- 20.0 mm(40)
- 20.18 mm(1)
- 22.0 mm(9)
- 22.225 mm(1)
- 25.0 mm(28)
- 25.39 mm(1)
- 25.4 mm(26)
- 25.41 mm(1)
- 27.0 mm(11)
- 31.0 mm(1)
- 31.027 mm(2)
- 31.7 mm(2)
- 31.74 mm(2)
- 31.75 mm(21)
- 32.0 mm(48)
- 38.09 mm(1)
- 38.1 mm(15)
- 38.11 mm(1)
- 40.0 mm(36)
- 44.45 mm(1)
- 48.0 mm(1)
- 50.0 mm(15)
- 50.79 mm(1)
- 50.8 mm(12)
- 60.0 mm(2)
- 63.0 mm(10)
- 63.49 mm(2)
- 63.5 mm(4)
- 80.0 mm(4)
to
Insert Geometry
Cutting Tool Material
Cutting Tool Material
- B H (757)
- B L (795)
- C A (718)
- C N (723)
- D P (801)
- H T (988)
- H W (1354)
Back-End
Connection Type
Connection Type
- Cutoff Blade (3)
- TAPER SHANK (968)
System Size
System Size
- KM12 (50)
- KM16 (87)
- KM1612 (1)
- KM20 (52)
- KM2016 (17)
- KM25 (76)
- KM32 (57)
- KM3225 (47)
- KM32TS (24)
- KM40TS (273)
- KM50 (10)
- KM50TS (263)
- KM63TS (304)
- KM63UT (1)
- KM63XMZ (159)
- KM80 (5)
- KM80ATC (108)
- KM80TS (113)
Back-End Diameter
Back-End Diameter
- 10.0 mm(1)
- 12.0 mm(47)
- 12.7 mm(2)
- 14.0 mm(1)
- 15.875 mm(2)
- 16.0 mm(86)
- 17.0 mm(1)
- 18.0 mm(1)
- 19.0 mm(1)
- 19.05 mm(5)
- 20.0 mm(85)
- 22.0 mm(1)
- 24.0 mm(1)
- 25.0 mm(79)
- 25.4 mm(3)
- 31.75 mm(2)
- 32.0 mm(155)
- 38.1 mm(8)
- 40.0 mm(378)
- 50.0 mm(378)
- 63.0 mm(611)
- 80.0 mm(279)
to
Back-End Diameter
Back-End Diameter
- 0.3937 in(1)
- 0.5 in(2)
- 0.5512 in(1)
- 0.625 in(2)
- 0.6299 in(2)
- 0.6693 in(1)
- 0.7087 in(1)
- 0.748 in(1)
- 0.75 in(5)
- 0.7874 in(14)
- 0.8661 in(1)
- 0.9449 in(1)
- 0.9843 in(8)
- 1.0 in(3)
- 1.25 in(2)
- 1.2598 in(36)
- 1.5 in(8)
- 1.5748 in(72)
- 1.9685 in(87)
- 1.97 in(4)
- 2.478 in(28)
- 2.48 in(19)
- 2.4803 in(257)
- 3.1496 in(135)
- 3.15 in(16)
to
Shank Height
Shank Height
- 0.0 in(4)
- 0.748 in(3)
to
Shank Height
Shank Height
- 0.0 mm(4)
- 19.0 mm(3)
to
Shank Width
Shank Width
- 0.0709 in(3)
to
Shank Width
Shank Width
- 1.8 mm(3)
to
Other
Insert Hand
Insert Hand
- L (221)
- N (1158)
- R (246)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
