欢迎
请确认您的首选项
更新首选项

产品建议

Product Family suggestions

Kennametal 随时为您服务

客户支持

查找全球客户支持中心的联系信息。

quick order warning
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Enter a Material #, Customer Material #, or Catalog # (ANSI/ISO) to quickly add products to your cart.
Quick Order in Cart
项目 已成功添加到购物车
查看购物车
项目 are being added to the cart
查看购物车

高性能刀片

选择筛选器
筛选器
筛选器
    查看以下位置的筛选器
    Metric
    Inch
    keyFilters
    工件材料
    工件材料
    • P 钢 (3793)
      • P0
        低碳钢，长切屑 C < .25%；<125 HB；<530 N/mm^2 UTS(3787)
      • P1
        低碳钢、短切屑 C < .25%；<125 HB；<530 N/mm^2 UTS(3787)
      • P2
        中碳钢和高碳钢 C < .25%；<220 HB；<25 HRC；>530 N/mm^2 UTS(3787)
      • P3
        合金钢和工具钢 C > .25%；<330 HB；<35 HRC；600-850 N/mm^2 UTS(3787)
      • P4
        合金钢和工具钢 C > .25%；350-420 HB；35-43 HRC；850-1400 N/mm^2 UTS(3787)
      • P5
        铁素体、马氏体和 PH 不锈钢 <330 HB；<35 HRC；600-900 N/mm^2 UTS(3793)
      • P6
        高强度铁素体、马氏体和 PH 不锈钢 350-450 HB；35-43 HRC；900-2400 N/mm^2 UTS(3793)
    • M 不锈钢 (3174)
      • M1
        奥氏体不锈钢 130-200 HB；<600 N/mm^2 UTS(3174)
      • M2
        高强度奥氏体不锈钢和铸造不锈钢 150-230 HB；<25 HRC; >600 N/mm^2 UTS(3174)
      • M3
        双相不锈钢 135-275 HB；<30 HRC; 500-1200 N/mm^2 UTS(3174)
    • K 铸铁 (2104)
      • K1
        灰口铸铁 120-290 HB；<32 HRC; 125-500 N/mm^2 UTS(2088)
      • K2
        中低强度 CGI 和球墨铸铁 130-260 HB；<28 HRC; <600 N/mm^2 UTS(2051)
      • K3
        高强度球墨铸铁和奥氏体球墨铸铁 180-350 HB；<43 HRC; >600 N/mm^2 UTS(1773)
    • N 非铁金属材料 (647)
      • N1
        铝型材 (481)
      • N2
        低硅铝合金和镁合金 硅 < 12.2%(520)
      • N3
        高硅铝合金 硅 > 12.2%(51)
      • N4
        可机加工转位范围为 70 到 100 的铜基、黄铜基、锌基 (647)
      • N5
        尼龙、塑料、橡胶、酚醛塑料、树脂、玻璃纤维 (571)
      • N6
        碳、石墨复合材料、CFRP (470)
      • N7
        MMC (107)
    • S 高温合金 (2934)
      • S1
        铁基耐热合金 160-260 HB；25-48 HRC；500-1200 N/mm^2 UTS(2746)
      • S2
        钴基耐热合金 250-450 HB；25-48 HRC；1000-1450 N/mm^2 UTS(2925)
      • S3
        镍基耐热合金 160-450 HB；<48 HRC; 600-1700 N/mm^2 UTS(2746)
      • S4
        钛和钛合金 300-400 HB；33-43 HRC；900-1600 N/mm^2 UTS(2406)
    • H 淬火材料 (552)
      • H1
        淬火材料 44-48 HRC(552)
      • H2
        淬火材料 48-55 HRC(552)
      • H3
        淬火材料 56-60 HRC(552)
      • H4
        淬火材料 >60 HRC(326)
    选择 First Choice
    • BR (116)
    • CN (601)
    • DE (643)
    • GB (423)
    • IN (408)
    • SG (326)
    • US (683)
    应用
    应用
    • Back BoringBack Boring (29)
    • BoringBoring (36)
    • FacingFacing (90)
    • GroovingGrooving (2)
    • ID FacingID Facing (69)
    • ID Thread TurningID Thread Turning (3)
    • OD Thread TurningOD Thread Turning (2)
    • ProfilingProfiling (48)
    • TurningTurning (90)
    每个刀片的切削刃
    每个刀片的切削刃
    • 0.0 (9)
    • 1.0 (376)
    • 2.0 (1835)
    • 3.0 (834)
    • 4.0 (2126)
    • 6.0 (861)
    • 8.0 (1146)
    • 16.0 (2)
    每个刀片的切削刃 Min到每个刀片的切削刃 Max
    cornerConfiguration
    刀尖半径
    刀尖半径
    • 0.002 in(28)
    • 0.003 in(1)
    • 0.004 in(112)
    • 0.005 in(2)
    • 0.007 in(50)
    • 0.008 in(437)
    • 0.014 in(1)
    • 0.015 in(43)
    • 0.016 in(1738)
    • 0.024 in(1)
    • 0.031 in(2648)
    • 0.047 in(1197)
    • 0.063 in(410)
    • 0.094 in(117)
    • 0.118 in(11)
    • 0.125 in(32)
    • 0.126 in(7)
    • 0.157 in(28)
    • 0.188 in(52)
    • 0.197 in(24)
    • 0.236 in(37)
    • 0.25 in(112)
    • 0.313 in(8)
    • 0.315 in(16)
    • 0.375 in(25)
    • 0.394 in(18)
    • 0.492 in(6)
    • 0.5 in(14)
    • 0.63 in(1)
    刀尖半径 Min到刀尖半径 Max
    刀尖半径
    刀尖半径
    • 0.05 mm(28)
    • 0.075 mm(1)
    • 0.1 mm(112)
    • 0.125 mm(2)
    • 0.175 mm(50)
    • 0.2 mm(437)
    • 0.35 mm(1)
    • 0.375 mm(43)
    • 0.4 mm(1738)
    • 0.6 mm(1)
    • 0.775 mm(4)
    • 0.8 mm(2644)
    • 1.2 mm(1197)
    • 1.6 mm(410)
    • 2.375 mm(9)
    • 2.4 mm(108)
    • 3.0 mm(11)
    • 3.175 mm(32)
    • 3.2 mm(7)
    • 4.0 mm(28)
    • 4.775 mm(52)
    • 5.0 mm(24)
    • 6.0 mm(37)
    • 6.35 mm(112)
    • 7.95 mm(8)
    • 8.0 mm(16)
    • 9.525 mm(25)
    • 10.0 mm(18)
    • 12.5 mm(6)
    • 12.7 mm(14)
    • 16.0 mm(1)
    刀尖半径 Min到刀尖半径 Max
    刀尖倒角
    刀尖倒角
    • 0.0 mm(7189)
    刀尖倒角 Min到刀尖倒角 Max
    刀尖倒角
    刀尖倒角
    • 0.0 in(7189)
    刀尖倒角 Min到刀尖倒角 Max
    application
    切削刀具材质
    切削刀具材质
    • K00379 (1)
    • K313 (99)
    • K68 (76)
    • KB1340 (18)
    • KB1345 (9)
    • KB1610 (13)
    • KB1630 (13)
    • KB5610 (15)
    • KB5630 (24)
    • KB9640 (11)
    • KBH10 (75)
    • KBH10B (31)
    • KBH20 (122)
    • KBH20B (32)
    • KBK35 (1)
    • KBK45 (26)
    • KC5010 (454)
    • KC5020P (1)
    • KC5025 (175)
    • KC5410 (72)
    • KC725M (14)
    • KC730 (234)
    • KC850 (210)
    • KC9125 (1)
    • KCK05 (63)
    • KCK05B (10)
    • KCK15 (92)
    • KCK15B (99)
    • KCK20 (149)
    • KCK20B (110)
    • KCM15 (75)
    • KCM15B (72)
    • KCM25 (125)
    • KCM25B (137)
    • KCM35 (54)
    • KCM35B (15)
    • KCP05 (86)
    • KCP05B (35)
    • KCP10 (238)
    • KCP10B (328)
    • KCP10C (4)
    • KCP15 (1)
    • KCP25 (230)
    • KCP25B (209)
    • KCP25C (597)
    • KCP30 (84)
    • KCP30B (37)
    • KCP40 (36)
    • KCP40B (70)
    • KCPK05 (43)
    • KCPK30 (4)
    • KCS10 (97)
    • KCS10B (193)
    • KCSM30 (1)
    • KCU10 (360)
    • KCU10B (544)
    • KCU25 (172)
    • KCU25B (286)
    • KD1400 (39)
    • KD1405 (9)
    • KD1425 (42)
    • KT315 (137)
    • KT325 (13)
    • KTP10 (44)
    • KY1540 (31)
    • KY1615 (3)
    • KY3500 (91)
    • KY4300 (49)
    • KY4400 (44)
    • KYHK15B (179)
    • KYK10 (14)
    • KYK25 (23)
    • KYS25 (21)
    • KYS30 (46)
    • KYSP30 (5)
    • SP4019 (9)
    修光刃刀片
    修光刃刀片
    • N (6876)
    • Y (304)
    frontEnd
    切削宽度
    切削宽度
    • 0.03 in(2)
    • 0.06 in(2)
    切削宽度 Min到切削宽度 Max
    切削宽度
    切削宽度
    • 0.762 mm(2)
    • 1.524 mm(2)
    切削宽度 Min到切削宽度 Max
    刀片形状
    刀片形状
    • C-DIAMOND/RHOMBIC 80 (2192)
    • D-DIAMOND/RHOMBIC 55 (1413)
    • E-DIAMOND/RHOMBIC 75 (8)
    • G-RHOMBIC 45 (5)
    • GROOVING/CUTOFF MISC (2)
    • L-RECTANGLE 90 (2)
    • LAY DOWN MISC (1)
    • R-ROUND (377)
    • S-SQUARE 90 (855)
    • T-TRIANGLE 60 (1295)
    • THREADING (1)
    • V-DIAMOND/RHOMBIC 35 (607)
    • W-TRIGON 80 (425)
    Thread TPI
    Thread TPI
    • 24.0 (2)
    Thread TPI Min到Thread TPI Max
    螺纹螺距
    螺纹螺距
    • 2.5 mm(2)
    螺纹螺距 Min到螺纹螺距 Max
    螺纹螺距
    螺纹螺距
    • 2.5 in(2)
    螺纹螺距 Min到螺纹螺距 Max
    insertGeometry
    形状
    形状
    • C-DIAMOND/RHOMBIC 80 (2192)
    • D-DIAMOND/RHOMBIC 55 (1415)
    • E-DIAMOND/RHOMBIC 75 (8)
    • G-RHOMBIC 45 (5)
    • GROOVING/CUTOFF MISC (2)
    • L-RECTANGLE 90 (2)
    • LAY DOWN MISC (1)
    • R-ROUND (377)
    • S-SQUARE 90 (855)
    • S-Square 90 (1)
    • T-TRIANGLE 60 (1295)
    • THREADING (1)
    • V-DIAMOND/RHOMBIC 35 (607)
    • W-TRIGON 80 (425)
    刀片 IC 尺寸
    刀片 IC 尺寸
    • 3.962 mm(4)
    • 3.975 mm(56)
    • 4.075 mm(35)
    • 4.75 mm(2)
    • 4.775 mm(11)
    • 5.55 mm(54)
    • 6.0 mm(11)
    • 6.35 mm(943)
    • 8.0 mm(26)
    • 9.45 mm(1)
    • 9.525 mm(2392)
    • 10.0 mm(35)
    • 11.0 mm(1)
    • 12.0 mm(37)
    • 12.7 mm(2791)
    • 15.875 mm(324)
    • 16.0 mm(16)
    • 19.05 mm(348)
    • 20.0 mm(18)
    • 25.0 mm(6)
    • 25.4 mm(69)
    • 32.0 mm(1)
    刀片 IC 尺寸 Min到刀片 IC 尺寸 Max
    刀片 IC 尺寸
    刀片 IC 尺寸
    • 0.156 in(60)
    • 0.16 in(35)
    • 0.187 in(2)
    • 0.188 in(11)
    • 0.219 in(54)
    • 0.236 in(11)
    • 0.25 in(943)
    • 0.315 in(26)
    • 0.372 in(1)
    • 0.375 in(2392)
    • 0.394 in(35)
    • 0.433 in(1)
    • 0.472 in(37)
    • 0.5 in(2791)
    • 0.625 in(324)
    • 0.63 in(16)
    • 0.75 in(348)
    • 0.787 in(18)
    • 0.984 in(6)
    • 1.0 in(69)
    • 1.26 in(1)
    刀片 IC 尺寸 Min到刀片 IC 尺寸 Max
    切削刃长度
    切削刃长度
    • 3.25 mm(1)
    • 3.257 mm(1)
    • 3.258 mm(9)
    • 4.03 mm(51)
    • 4.344 mm(16)
    • 5.556 mm(4)
    • 5.61 mm(2)
    • 5.611 mm(3)
    • 5.642 mm(9)
    • 5.646 mm(4)
    • 6.35 mm(3)
    • 6.448 mm(262)
    • 6.45 mm(67)
    • 6.459 mm(8)
    • 6.472 mm(9)
    • 6.515 mm(103)
    • 7.036 mm(14)
    • 7.04 mm(21)
    • 7.75 mm(3)
    • 7.752 mm(154)
    • 8.687 mm(293)
    • 8.69 mm(2)
    • 9.525 mm(205)
    • 9.62 mm(5)
    • 9.624 mm(12)
    • 9.63 mm(20)
    • 9.67 mm(2)
    • 9.672 mm(484)
    • 10.95 mm(4)
    • 10.999 mm(95)
    • 11.0 mm(196)
    • 11.07 mm(3)
    • 11.071 mm(94)
    • 11.594 mm(5)
    • 11.628 mm(431)
    • 11.63 mm(8)
    • 12.208 mm(11)
    • 12.7 mm(414)
    • 12.896 mm(885)
    • 12.9 mm(13)
    • 13.148 mm(8)
    • 13.891 mm(5)
    • 15.138 mm(1)
    • 15.5 mm(8)
    • 15.504 mm(781)
    • 15.875 mm(73)
    • 16.12 mm(190)
    • 16.495 mm(1)
    • 16.498 mm(236)
    • 16.5 mm(395)
    • 16.595 mm(1)
    • 16.598 mm(2)
    • 16.606 mm(456)
    • 16.61 mm(5)
    • 19.05 mm(126)
    • 19.344 mm(182)
    • 19.38 mm(11)
    • 21.997 mm(61)
    • 22.0 mm(170)
    • 22.142 mm(43)
    • 25.4 mm(40)
    • 25.792 mm(15)
    • 27.496 mm(42)
    • 33.0 mm(15)
    • 38.1 mm(2)
    切削刃长度 Min到切削刃长度 Max
    切削刃长度
    切削刃长度
    • 0.128 in(1)
    • 0.1282 in(1)
    • 0.1283 in(9)
    • 0.1587 in(25)
    • 0.159 in(26)
    • 0.171 in(16)
    • 0.2188 in(4)
    • 0.2209 in(3)
    • 0.221 in(2)
    • 0.2221 in(9)
    • 0.2223 in(4)
    • 0.2359 in(1)
    • 0.25 in(3)
    • 0.2539 in(314)
    • 0.254 in(14)
    • 0.2543 in(8)
    • 0.2548 in(9)
    • 0.2565 in(103)
    • 0.277 in(35)
    • 0.305 in(1)
    • 0.3052 in(156)
    • 0.342 in(295)
    • 0.375 in(205)
    • 0.3789 in(12)
    • 0.379 in(5)
    • 0.3791 in(20)
    • 0.3808 in(475)
    • 0.381 in(11)
    • 0.4311 in(4)
    • 0.433 in(96)
    • 0.4331 in(195)
    • 0.4359 in(94)
    • 0.436 in(3)
    • 0.4565 in(5)
    • 0.4578 in(426)
    • 0.458 in(13)
    • 0.4806 in(11)
    • 0.5 in(414)
    • 0.5077 in(886)
    • 0.5079 in(4)
    • 0.508 in(8)
    • 0.5176 in(8)
    • 0.5469 in(5)
    • 0.596 in(1)
    • 0.61 in(8)
    • 0.6104 in(781)
    • 0.6195 in(4)
    • 0.625 in(73)
    • 0.6346 in(190)
    • 0.6495 in(234)
    • 0.6496 in(322)
    • 0.65 in(74)
    • 0.6533 in(1)
    • 0.6538 in(456)
    • 0.654 in(5)
    • 0.75 in(126)
    • 0.7616 in(182)
    • 0.763 in(11)
    • 0.866 in(91)
    • 0.8661 in(134)
    • 0.8666 in(6)
    • 0.8717 in(43)
    • 1.0 in(40)
    • 1.0154 in(15)
    • 1.0825 in(42)
    • 1.299 in(5)
    • 1.2992 in(10)
    • 1.5 in(2)
    切削刃长度 Min到切削刃长度 Max
    断屑槽 CBMD
    断屑槽 CBMD
    • 04 (3)
    • 11 (30)
    • 2A (1)
    • 33 (6)
    • 3J (2)
    • 62 (7)
    • AP (4)
    • B (12)
    • CB (2)
    • CB1 (11)
    • CB2 (3)
    • CC (2)
    • CT (41)
    • E (3)
    • EM (1)
    • EMT (1)
    • FF (102)
    • FM (6)
    • FN (149)
    • FP (472)
    • FPS (1)
    • FS (92)
    • FV (93)
    • FW (155)
    • GN (4)
    • HP (306)
    • K (107)
    • LF (1121)
    • MF (198)
    • MG (32)
    • MN (179)
    • MP (469)
    • MR (103)
    • MS (259)
    • MT (1)
    • MV (125)
    • MW (80)
    • P (51)
    • RH (50)
    • RM (106)
    • RN (227)
    • RP (530)
    • RW (6)
    • UF (84)
    • UN (109)
    • UP (66)
    切削刀具材料
    切削刀具材料
    • B H (94)
    • B L (253)
    • C A (117)
    • C N (369)
    • D P (97)
    • H T (192)
    • H W (6067)
    公差等级
    公差等级
    • G (2082)
    • H (122)
    • M (4938)
    • U (30)
    other
    刀座
    刀座
    • L (31)
    • N (7121)
    • R (28)
    No filters matching ""
    High Performance Inserts
    Negative Style Inserts • Kenloc™
    (3724)

    Negative Style Inserts • Kenloc™

    Positive Style Inserts • Screw-On
    (2829)

    Positive Style Inserts • Screw-On

    Positive Style Inserts • Kendex™
    (333)

    Positive Style Inserts • Kendex™

    Negative Style Inserts • Kendex™
    (306)

    Negative Style Inserts • Kendex™

    您即将把 添加至“我的解决方案”页面. 是否要继续？
    Select the destination where you want to move 到.
    最新 Folder
      • Applied Filters:
      • Clear All

    A folder with the name already exists.

    请输入一个有效名称
    Product successfully added to project __PROJECT_NAME__
    product-image
    Please adjust the following properties from

    ISO Catalog

    ANSI Catalog

    to find similar products.

    The following files are available

    Please select a file to download

    Models

    I have read and accepted the Terms & Conditions of use

    Can’t find the file type you’re looking for?

    应记录以查看仪表盘信息
    Session expired due to inactivity, please login again
    您尝试添加到购物车的产品 () 不可用，请 联系客户服务部。
    件物品已成功添加到购物车
    View Cart

    . Please enter the desired qty for the material(s) you want to include in your promotion or Proceed Without Promotion and only your base materials will be added to the cart.

    Minimum quantity should be

    SAP Material Number ISO Catalog Grade  

    You are about to leave the Solution building process.

    Are you sure you want to leave?

    Workpiece Selection

    Standard

    ALL

    Material

    Select a Value

    Hardness

    --

        Hardness Scale

        --

          Permitted Groups :

          Group

          SubGroup

          Hardness (HB)

          Hardness (HRC)

          CancelOk