Kendex™ • Fixação de estilo C • Para insertos de estilo Kendex
Filtros
Filtros
Exibir filtros em
MétricoPolegada
Workpiece Material
Workpiece Material
- P Steel (70)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(70)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(70)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(70)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(70)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(70)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(70)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(70)
- M Stainless Steel (70)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(70)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(70)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(70)
- K Cast Iron (94)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(94)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(89)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(85)
- N Non-Ferrous Materials (86)
- N1Wrought Aluminum (75)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(75)
- N3High-Silicon Aluminum Alloys Si >12.2%(52)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (86)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (75)
- N6Carbon, Graphite Composites, CFRP (65)
- N7MMC's (73)
- S High-Temp Alloys (94)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(94)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(94)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(94)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(86)
- H Hardened Materials (80)
- H1Hardened Materials 44-48 HRC(80)
- H2Hardened Materials 48-55 HRC(80)
- H3Hardened Materials 56-60 HRC(80)
- H4Hardened Materials >60 HRC(57)
- C CFRP Materials (75)
- C1CFRP, CFRP / CFRP (65)
- C2CFRP / Aluminium CFRP / Non-Ferrous (73)
Applications
Applications
Facing (96)
Multiple Direction Cutting (34)
Profiling (27)
TRN Boring (7)
Turning (102)
Cutting Condition Material
Cutting Condition Material
- H-All (59)
- K-All (86)
- K1 (14)
- M-All (65)
- P-All (70)
- S-All (65)
- S2 (59)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (82)
- Lightly Interrupted Cut (92)
- Smooth Cut (92)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (15)
- 60.0 (3)
- 75.0 (14)
- 90.0 (61)
- 95.0 (11)
a
Connection Style
Connection Style
- KM (13)
- Toolholder (84)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (55)
- 2.0 (18)
- 3.0 (47)
- 4.0 (24)
- 6.0 (2)
- 8.0 (11)
a
Over All Length [L]
Over All Length [L]
- 1.969 in(4)
- 2.362 in(5)
- 2.3622 in(11)
- 3.1496 in(2)
- 3.5 in(2)
- 3.937 in(1)
- 4.0 in(1)
- 4.5 in(14)
- 4.9213 in(3)
- 5.0 in(8)
- 5.9055 in(8)
- 5.906 in(1)
- 6.0 in(38)
- 7.0 in(2)
- 8.0 in(4)
a
Over All Length [L]
Over All Length [L]
- 50.0 mm(4)
- 60.0 mm(16)
- 80.0 mm(2)
- 88.9 mm(2)
- 100.0 mm(1)
- 101.6 mm(1)
- 114.3 mm(14)
- 125.0 mm(3)
- 127.0 mm(8)
- 150.0 mm(9)
- 152.4 mm(38)
- 177.8 mm(2)
- 203.2 mm(4)
a
Corner Radius
Corner Radius
- 0.004 in(20)
- 0.008 in(23)
- 0.016 in(72)
- 0.031 in(83)
- 0.047 in(67)
- 0.063 in(66)
- 0.094 in(22)
- 0.126 in(22)
- 0.188 in(3)
- 0.25 in(10)
a
Corner Radius
Corner Radius
- 0.1 mm(20)
- 0.2 mm(23)
- 0.4 mm(72)
- 0.8 mm(83)
- 1.2 mm(67)
- 1.6 mm(66)
- 2.4 mm(22)
- 3.2 mm(22)
- 4.775 mm(3)
- 6.35 mm(10)
a
application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- AC5 (13)
- CW2015 (15)
- CW3020 (13)
- CW5025 (7)
- K1 (13)
- K313 (73)
- K68 (82)
- KB1340 (17)
- KB1630 (39)
- KB5630 (3)
- KB9640 (19)
- KBK45 (9)
- KC5010 (61)
- KC730 (69)
- KC850 (70)
- KCK15B (47)
- KCP10B (20)
- KCP25B (60)
- KCP25C (61)
- KCU10 (65)
- KCU10B (65)
- KD1425 (52)
- KMF (20)
- KT125 (20)
- KY1540 (16)
- KY1615 (63)
- KY3500 (36)
- KY4300 (17)
- KY4400 (55)
- KYHK15B (59)
- KYK25 (3)
- KYS25 (14)
- KYS30 (14)
- YY87EL (20)
Hand Of Tool
Hand Of Tool
- L (31)
- N (17)
- R (49)
Wiper Insert
Wiper Insert
- N (96)
F Dimension
F Dimension
- 0.0 mm(1)
- 7.925 mm(1)
- 9.525 mm(2)
- 9.959 mm(1)
- 10.0 mm(1)
- 11.684 mm(1)
- 12.5 mm(1)
- 12.7 mm(3)
- 12.701 mm(1)
- 13.767 mm(1)
- 14.418 mm(1)
- 15.494 mm(1)
- 15.875 mm(1)
- 16.0 mm(2)
- 17.0 mm(1)
- 17.78 mm(1)
- 19.05 mm(5)
- 19.167 mm(1)
- 19.863 mm(1)
- 19.866 mm(2)
- 20.0 mm(1)
- 20.167 mm(1)
- 25.0 mm(1)
- 25.4 mm(7)
- 26.62 mm(2)
- 26.924 mm(2)
- 28.58 mm(4)
- 29.718 mm(2)
- 29.72 mm(2)
- 31.75 mm(22)
- 32.0 mm(4)
- 35.0 mm(2)
- 38.0 mm(6)
- 38.1 mm(7)
- 43.0 mm(4)
- 50.8 mm(1)
a
F Dimension
F Dimension
- 0.0 in(1)
- 0.312 in(1)
- 0.375 in(2)
- 0.392 in(1)
- 0.3937 in(1)
- 0.46 in(1)
- 0.4921 in(1)
- 0.5 in(4)
- 0.542 in(1)
- 0.5675 in(1)
- 0.61 in(1)
- 0.625 in(1)
- 0.6299 in(2)
- 0.6693 in(1)
- 0.7 in(1)
- 0.75 in(5)
- 0.7545 in(1)
- 0.782 in(1)
- 0.7821 in(2)
- 0.787 in(1)
- 0.794 in(1)
- 0.984 in(1)
- 1.0 in(7)
- 1.048 in(2)
- 1.06 in(2)
- 1.125 in(4)
- 1.17 in(4)
- 1.25 in(22)
- 1.2598 in(2)
- 1.26 in(2)
- 1.378 in(2)
- 1.4961 in(6)
- 1.5 in(7)
- 1.6929 in(4)
- 2.0 in(1)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 70.0 mm(2)
- 86.0 mm(5)
a
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 2.756 in(2)
- 3.386 in(5)
a
Cutting Direction
Cutting Direction
- B (12)
- E (31)
- S (54)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (22)
- DOUBLE POSITIVE (18)
- NEGATIVE-ZERO (3)
- POSITIVE-ZERO (54)
Maximum Bore Depth
Maximum Bore Depth
- 1.969 in(2)
- 2.362 in(5)
a
Maximum Bore Depth
Maximum Bore Depth
- 50.0 mm(2)
- 60.0 mm(5)
a
frontEnd
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (14)
- R-ROUND (13)
- S-SQUARE 90 (26)
- T-TRIANGLE 60 (51)
Maximum Cutting Depth
Maximum Cutting Depth
- 1.25 in(2)
- 1.38 in(5)
a
Maximum Cutting Depth
Maximum Cutting Depth
- 31.75 mm(2)
- 35.051 mm(1)
- 35.052 mm(4)
a
insertGeometry
Cutting Tool Material
Cutting Tool Material
- B H (58)
- C A (79)
- C N (61)
- D P (52)
- H T (20)
- H W (94)
backEnd
Connection Type
Connection Type
- SQUARE SHANK (84)
- TAPER SHANK (13)
System Size
System Size
- KM50TS (2)
- KM63TS (11)
Back-End Diameter
Back-End Diameter
- 50.0 mm(4)
- 63.0 mm(16)
a
Shank Height
Shank Height
- 0.4724 in(2)
- 0.5 in(4)
- 0.625 in(2)
- 0.63 in(1)
- 0.75 in(12)
- 0.787 in(1)
- 0.7874 in(2)
- 0.984 in(4)
- 0.9843 in(5)
- 1.0 in(35)
- 1.25 in(12)
- 1.5 in(4)
a
Shank Height
Shank Height
- 12.0 mm(2)
- 12.7 mm(4)
- 15.875 mm(2)
- 16.0 mm(1)
- 19.05 mm(12)
- 20.0 mm(3)
- 25.0 mm(9)
- 25.4 mm(35)
- 31.75 mm(12)
- 38.1 mm(4)
a
Shank Width
Shank Width
- 0.3937 in(1)
- 0.4724 in(1)
- 0.474 in(1)
- 0.5 in(5)
- 0.5512 in(1)
- 0.625 in(2)
- 0.63 in(1)
- 0.7087 in(1)
- 0.75 in(14)
- 0.787 in(1)
- 0.7874 in(3)
- 0.984 in(2)
- 0.9843 in(3)
- 1.0 in(40)
- 1.25 in(7)
- 1.5 in(1)
a
Shank Width
Shank Width
- 10.0 mm(1)
- 12.0 mm(2)
- 12.7 mm(5)
- 14.0 mm(1)
- 15.875 mm(2)
- 16.0 mm(1)
- 18.0 mm(1)
- 19.05 mm(14)
- 20.0 mm(4)
- 25.0 mm(5)
- 25.4 mm(40)
- 31.75 mm(7)
- 38.1 mm(1)
a
other
Insert Hand
Insert Hand
- N (96)
No filters matching ""
