Specialty Turning • Tangentially Mounted Inserts • Fix-Perfect™
The Kennametal Fix Perfect line of specialty turning tools allows you to realize consistent and accurate cuts regardless of cutting edge length, insert thickness, or corning radius. When you use innovative tangentially mounted inserts from Kennametal, you end up with quality results on every cutting application. Fix-Perfect specialty inserts are available for all workpiece materials across multiple applications. By opting for Fix-Perfect tools, you’ll reduce your downtime by minimizing wear and tear.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (185)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(185)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(185)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(185)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(185)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(185)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(185)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(185)
- M Stainless Steel (130)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(130)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(130)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(130)
- K Cast Iron (124)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(124)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(124)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(124)
- N Non-Ferrous Materials (65)
- N1Wrought Aluminum (65)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(65)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (65)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (65)
- N6Carbon, Graphite Composites, CFRP (65)
- S High-Temp Alloys (110)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(110)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(110)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(110)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(110)
- C CFRP Materials (48)
- C1CFRP, CFRP / CFRP (48)
Applications
Applications
Multiple Direction Cutting (18)
Cutting Condition Material
Cutting Condition Material
- H-All (53)
- K-All (129)
- M-All (97)
- N-All (73)
- P-All (172)
- S-All (97)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (113)
- Lightly Interrupted Cut (119)
- Smooth Cut (172)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 45.0 (1)
- 75.0 (5)
- 90.0 (12)
- 92.0 (4)
- 93.0 (12)
to
Connection Style
Connection Style
- Toolholder (34)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (94)
- 4.0 (18)
- 8.0 (73)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 3.15 in(1)
- 3.937 in(1)
- 4.921 in(4)
- 4.9213 in(4)
- 5.9055 in(12)
- 5.906 in(3)
- 6.0 in(3)
- 6.6929 in(4)
- 7.0 in(1)
- 59.06 in(1)
to
Over All Length [L]
Over All Length [L]
- 80.0 mm(1)
- 100.0 mm(1)
- 125.0 mm(8)
- 150.0 mm(16)
- 152.4 mm(3)
- 170.0 mm(4)
- 177.8 mm(1)
to
Corner Radius
Corner Radius
- 0.012 in(63)
- 0.016 in(38)
- 0.02 in(79)
- 0.031 in(64)
- 0.039 in(7)
- 0.047 in(19)
to
Corner Radius
Corner Radius
- 0.3 mm(63)
- 0.4 mm(38)
- 0.5 mm(79)
- 0.8 mm(64)
- 1.0 mm(7)
- 1.2 mm(19)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(153)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(153)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- KCM15 (4)
- KCP10 (28)
- KCP25 (77)
- KCP40 (51)
- KCU10 (53)
- KCU10B (48)
- KCU25 (44)
- KCU25B (29)
Hand Of Tool
Hand Of Tool
- L (11)
- R (23)
Wiper Insert
Wiper Insert
- N (185)
Drilling Condition Material
Drilling Condition Material
- H-All (24)
- K-All (97)
- M-All (66)
- N-All (42)
- P-All (140)
- S-All (66)
F Dimension
F Dimension
- 14.0 mm(1)
- 17.0 mm(3)
- 21.0 mm(1)
- 24.0 mm(1)
- 25.0 mm(5)
- 26.0 mm(1)
- 27.0 mm(1)
- 31.75 mm(3)
- 32.0 mm(16)
- 38.1 mm(1)
- 40.0 mm(1)
to
F Dimension
F Dimension
- 0.551 in(1)
- 0.669 in(2)
- 0.6693 in(1)
- 0.8268 in(1)
- 0.9449 in(1)
- 0.984 in(2)
- 0.9843 in(3)
- 1.0236 in(1)
- 1.063 in(1)
- 1.25 in(3)
- 1.2598 in(12)
- 1.26 in(4)
- 1.5 in(1)
- 1.5748 in(1)
to
Cutting Direction
Cutting Direction
- E (1)
- S (33)
Rake Angle Style
Rake Angle Style
- DOUBLE NEGATIVE (7)
- DOUBLE POSITIVE (3)
- POSITIVE-NEGATIVE (8)
- POSITIVE-ZERO (14)
Front-End
Clamp Style
Clamp Style
- X (34)
Insert Shape
Insert Shape
- C-DIAMOND/RHOMBIC 80 (19)
- D-DIAMOND/RHOMBIC 55 (16)
- FIX-PERFECT 2 CUT EDGES (76)
- FIX-PERFECT 4 CUT EDGES (14)
- FIX-PERFECT 8 CUT EDGES (62)
Insert Geometry
Shape
Shape
- C-DIAMOND/RHOMBIC 80 (19)
- D-DIAMOND/RHOMBIC 55 (16)
- FIX-PERFECT 2 CUT EDGES (62)
- FIX-PERFECT 4 CUT EDGES (10)
- FIX-PERFECT 8 CUT EDGES (46)
Cutting Edge Length
Cutting Edge Length
- 6.7 mm(7)
- 6.9 mm(4)
- 7.0 mm(2)
- 7.1 mm(6)
- 7.2 mm(4)
- 7.3 mm(10)
- 7.8 mm(1)
- 8.6 mm(2)
- 8.8 mm(2)
- 8.9 mm(7)
- 9.3 mm(8)
- 10.0 mm(13)
- 10.1 mm(5)
- 10.5 mm(8)
- 10.6 mm(4)
- 10.7 mm(10)
- 10.9 mm(2)
- 11.1 mm(1)
- 13.6 mm(5)
- 13.9 mm(7)
- 14.0 mm(3)
- 14.1 mm(9)
- 14.2 mm(2)
- 14.5 mm(12)
- 14.6 mm(6)
- 14.7 mm(9)
- 17.5 mm(4)
to
Cutting Edge Length
Cutting Edge Length
- 0.264 in(7)
- 0.272 in(4)
- 0.276 in(2)
- 0.28 in(6)
- 0.283 in(4)
- 0.287 in(10)
- 0.306 in(1)
- 0.339 in(2)
- 0.345 in(2)
- 0.35 in(7)
- 0.366 in(8)
- 0.394 in(13)
- 0.396 in(5)
- 0.4134 in(8)
- 0.417 in(4)
- 0.419 in(1)
- 0.423 in(7)
- 0.429 in(2)
- 0.432 in(2)
- 0.437 in(1)
- 0.535 in(5)
- 0.549 in(7)
- 0.551 in(3)
- 0.554 in(9)
- 0.56 in(2)
- 0.571 in(11)
- 0.5716 in(1)
- 0.574 in(5)
- 0.575 in(1)
- 0.578 in(8)
- 0.579 in(1)
- 0.689 in(4)
to
Chip Breaker CBMD
Chip Breaker CBMD
- FN (3)
- HP (24)
- MN (57)
- MP (17)
- MS (8)
- RN (29)
- RP (14)
Cutting Tool Material
Cutting Tool Material
- H W (185)
Tolerance Class
Tolerance Class
- M (153)
Back-End
Connection Type
Connection Type
- SQUARE SHANK (34)
Shank Height
Shank Height
- 0.473 in(1)
- 0.6299 in(1)
- 0.787 in(4)
- 0.7874 in(4)
- 0.984 in(4)
- 0.9843 in(12)
- 1.0 in(3)
- 1.25 in(1)
- 1.2598 in(4)
to
Shank Height
Shank Height
- 12.0 mm(1)
- 16.0 mm(1)
- 20.0 mm(8)
- 25.0 mm(16)
- 25.4 mm(3)
- 31.75 mm(1)
- 32.0 mm(4)
to
Shank Width
Shank Width
- 0.4724 in(1)
- 0.6299 in(1)
- 0.787 in(3)
- 0.7874 in(5)
- 0.984 in(4)
- 0.9843 in(14)
- 1.0 in(3)
- 1.25 in(1)
- 1.2598 in(2)
to
Shank Width
Shank Width
- 12.0 mm(1)
- 16.0 mm(1)
- 20.0 mm(8)
- 25.0 mm(18)
- 25.4 mm(3)
- 31.75 mm(1)
- 32.0 mm(2)
to
Other
Insert Hand
Insert Hand
- L (71)
- R (114)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
