A4™ • Double-Ended Grooving
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (862)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(862)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(862)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(862)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(862)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(862)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(862)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(862)
- M Stainless Steel (789)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(789)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(789)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(789)
- K Cast Iron (845)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(845)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(836)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(824)
- N Non-Ferrous Materials (797)
- N1Wrought Aluminum (797)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(788)
- N3High-Silicon Aluminum Alloys Si >12.2%(69)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (797)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (788)
- N6Carbon, Graphite Composites, CFRP (788)
- N7MMC's (69)
- S High-Temp Alloys (806)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(806)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(806)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(806)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(793)
- H Hardened Materials (426)
- H1Hardened Materials 44-48 HRC(426)
- H2Hardened Materials 48-55 HRC(368)
- H3Hardened Materials 56-60 HRC(93)
- H4Hardened Materials >60 HRC(93)
Select First Choice
- BR (39)
- CN (157)
- DE (157)
- GB (106)
- IN (105)
- SG (107)
- US (158)
Applications
Applications
Back Boring (112)
Boring (491)
Cut-Off (189)
Deep Grooving (34)
Face Grooving (695)
Facing (116)
Grooving (611)
ID Facing (112)
ID Grooving (491)
Multiple Direction Cutting (143)
Plunge Turning (383)
Profiling (107)
Turning (126)
Cutting Condition Material
Cutting Condition Material
- H-All (359)
- K-All (679)
- M-All (625)
- N-All (621)
- P-All (611)
- S-All (630)
Cutting Condition
Cutting Condition
- Heavily Interrupted Cut (514)
- Lightly Interrupted Cut (649)
- Smooth Cut (838)
Tool Cutting Edge Angle
Tool Cutting Edge Angle
- 90.0 (143)
to
Connection Style
Connection Style
- Boring Bar Shank (11)
- Toolholder (21)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (27)
- 2.0 (775)
to
Over All Length [L]
Over All Length [L]
- 2.077 in(31)
- 2.155 in(43)
- 2.2687 in(21)
- 2.352 in(14)
- 4.9213 in(3)
- 4.9331 in(7)
- 5.0 in(2)
- 5.463 in(2)
- 5.508 in(6)
- 5.9055 in(4)
- 5.906 in(3)
- 5.915 in(2)
- 5.9173 in(1)
- 5.961 in(4)
- 6.0 in(11)
- 6.25 in(2)
- 6.693 in(1)
- 6.703 in(2)
- 7.0 in(2)
- 7.9311 in(7)
- 8.0118 in(4)
to
Over All Length [L]
Over All Length [L]
- 52.746 mm(11)
- 52.75 mm(20)
- 54.75 mm(43)
- 57.6129 mm(2)
- 57.6229 mm(19)
- 59.75 mm(14)
- 125.0 mm(3)
- 125.3 mm(7)
- 127.0 mm(2)
- 138.75 mm(2)
- 139.9 mm(5)
- 139.903 mm(1)
- 150.0 mm(7)
- 150.25 mm(2)
- 150.3 mm(1)
- 151.4 mm(4)
- 152.4 mm(11)
- 158.75 mm(2)
- 170.0 mm(1)
- 170.25 mm(2)
- 177.8 mm(2)
- 201.45 mm(7)
- 203.5 mm(4)
to
Corner Radius
Corner Radius
- 0.006 in(11)
- 0.008 in(259)
- 0.016 in(314)
- 0.031 in(233)
- 0.039 in(45)
- 0.041 in(26)
- 0.047 in(60)
- 0.048 in(10)
- 0.059 in(56)
- 0.06 in(41)
- 0.063 in(39)
- 0.079 in(33)
- 0.08 in(30)
- 0.094 in(28)
- 0.098 in(33)
- 0.099 in(28)
- 0.118 in(28)
- 0.119 in(25)
- 0.125 in(26)
- 0.156 in(8)
- 0.157 in(14)
- 0.158 in(16)
- 0.188 in(6)
- 0.197 in(8)
- 0.198 in(11)
to
Corner Radius
Corner Radius
- 0.15 mm(11)
- 0.2 mm(259)
- 0.4 mm(314)
- 0.8 mm(233)
- 1.0 mm(45)
- 1.05 mm(26)
- 1.2 mm(60)
- 1.225 mm(10)
- 1.5 mm(56)
- 1.525 mm(41)
- 1.6 mm(39)
- 2.0 mm(33)
- 2.025 mm(30)
- 2.375 mm(28)
- 2.5 mm(33)
- 2.525 mm(28)
- 3.0 mm(28)
- 3.025 mm(25)
- 3.175 mm(26)
- 3.975 mm(8)
- 4.0 mm(14)
- 4.025 mm(16)
- 4.775 mm(6)
- 5.0 mm(8)
- 5.025 mm(11)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(872)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(872)
to
Application
Minimum Depth of Cut
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- K313 (99)
- KB1630 (89)
- KBH20 (84)
- KC5010 (168)
- KC5025 (178)
- KC9125 (20)
- KCK20 (96)
- KCP10 (143)
- KCP25 (144)
- KCU10 (243)
- KCU10B (255)
- KCU25 (288)
- KCU25B (301)
- KD1405 (69)
- KMS (29)
- KT315 (89)
- KY3500 (98)
- KYS30 (41)
Hand Of Tool
Hand Of Tool
- L (5)
- N (10)
- R (17)
Wiper Insert
Wiper Insert
- N (793)
Drilling Condition Material
Drilling Condition Material
- H-All (216)
- K-All (536)
- M-All (482)
- N-All (478)
- P-All (468)
- S-All (487)
F Dimension
F Dimension
- 8.17 mm(1)
- 8.23 mm(2)
- 9.76 mm(1)
- 10.23 mm(1)
- 10.24 mm(1)
- 12.73 mm(3)
- 13.03 mm(2)
- 19.253 mm(2)
- 20.19 mm(7)
- 25.19 mm(1)
- 25.4 mm(1)
- 25.578 mm(1)
- 27.9 mm(1)
- 30.4 mm(1)
- 30.8 mm(1)
- 33.1 mm(1)
- 35.1 mm(1)
- 35.4 mm(1)
- 38.9 mm(1)
- 39.1 mm(2)
to
F Dimension
F Dimension
- 0.3217 in(1)
- 0.324 in(2)
- 0.3843 in(1)
- 0.4028 in(1)
- 0.4031 in(1)
- 0.5012 in(3)
- 0.513 in(2)
- 0.758 in(2)
- 0.7949 in(7)
- 0.9917 in(1)
- 1.0 in(1)
- 1.007 in(1)
- 1.0984 in(1)
- 1.1969 in(1)
- 1.2126 in(1)
- 1.3031 in(1)
- 1.3819 in(1)
- 1.3937 in(1)
- 1.5315 in(1)
- 1.5394 in(2)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 16.0 mm(4)
- 17.0 mm(3)
- 19.99 mm(1)
- 20.0 mm(5)
- 21.0 mm(3)
- 24.994 mm(1)
- 25.0 mm(9)
- 26.0 mm(5)
- 28.0 mm(1)
- 36.0 mm(5)
- 37.998 mm(1)
- 42.0 mm(5)
- 48.0 mm(3)
- 50.0 mm(3)
- 52.0 mm(3)
- 58.0 mm(4)
- 60.0 mm(4)
- 64.0 mm(4)
- 68.0 mm(4)
- 70.0 mm(7)
- 80.0 mm(7)
- 90.0 mm(8)
- 92.0 mm(3)
- 100.0 mm(4)
- 120.0 mm(13)
- 130.0 mm(4)
- 132.0 mm(4)
- 184.0 mm(3)
- 200.0 mm(8)
- 250.0 mm(6)
- 290.0 mm(8)
to
Minimum Axial Groove Diameter
Minimum Axial Groove Diameter
- 0.6299 in(4)
- 0.6693 in(3)
- 0.787 in(1)
- 0.7874 in(5)
- 0.8268 in(3)
- 0.984 in(1)
- 0.9843 in(9)
- 1.0236 in(5)
- 1.1024 in(1)
- 1.4173 in(5)
- 1.496 in(1)
- 1.6535 in(5)
- 1.8898 in(3)
- 1.9685 in(3)
- 2.0472 in(3)
- 2.2835 in(4)
- 2.3622 in(4)
- 2.5197 in(4)
- 2.6772 in(4)
- 2.7559 in(7)
- 3.1496 in(7)
- 3.5433 in(8)
- 3.622 in(3)
- 3.937 in(4)
- 4.7244 in(13)
- 5.1181 in(4)
- 5.1969 in(4)
- 7.2441 in(3)
- 7.874 in(8)
- 9.8425 in(6)
- 11.4173 in(8)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 0.7874 in(4)
- 0.8268 in(3)
- 0.9055 in(1)
- 0.984 in(1)
- 0.9843 in(5)
- 1.0236 in(2)
- 1.378 in(2)
- 1.417 in(1)
- 1.4173 in(12)
- 1.4961 in(1)
- 1.811 in(1)
- 1.8898 in(4)
- 2.126 in(2)
- 2.2835 in(4)
- 2.5197 in(3)
- 2.8346 in(3)
- 2.9134 in(3)
- 3.3071 in(4)
- 3.7008 in(4)
- 3.937 in(8)
- 4.4094 in(4)
- 4.8819 in(3)
- 5.3543 in(4)
- 5.9055 in(3)
- 6.2992 in(4)
- 7.874 in(2)
- 8.3465 in(4)
- 10.0 in(4)
- 11.811 in(12)
- 39.3307 in(11)
to
Maximum Axial Groove Diameter
Maximum Axial Groove Diameter
- 20.0 mm(4)
- 21.0 mm(3)
- 23.0 mm(1)
- 24.994 mm(1)
- 25.0 mm(5)
- 26.0 mm(2)
- 35.0 mm(2)
- 35.992 mm(1)
- 36.0 mm(12)
- 38.0 mm(1)
- 46.0 mm(1)
- 48.0 mm(4)
- 54.0 mm(2)
- 58.0 mm(3)
- 58.001 mm(1)
- 64.0 mm(3)
- 72.0 mm(3)
- 74.0 mm(3)
- 84.0 mm(4)
- 94.0 mm(4)
- 100.0 mm(8)
- 112.0 mm(4)
- 124.0 mm(3)
- 136.0 mm(4)
- 150.0 mm(3)
- 160.0 mm(4)
- 200.0 mm(2)
- 212.0 mm(4)
- 254.0 mm(4)
- 300.0 mm(12)
- 999.0 mm(11)
to
Cutting Direction
Cutting Direction
- E (22)
- S (10)
Rake Angle Style
Rake Angle Style
- NEUTRAL (ZERO) (10)
Maximum Bore Depth
Maximum Bore Depth
- 2.5 in(1)
- 2.5196 in(2)
- 3.0 in(1)
- 3.1496 in(2)
- 3.9372 in(3)
- 4.0 in(2)
to
Maximum Bore Depth
Maximum Bore Depth
- 63.5 mm(1)
- 64.0 mm(2)
- 76.2 mm(1)
- 80.0 mm(2)
- 100.0 mm(3)
- 101.6 mm(2)
to
Boring Bar Material
Boring Bar Material
- S (11)
Front-End
Adapter Front-End
Adapter Front-End
- CARTRIDGE MOUNT (3)
Clamp Style
Clamp Style
- Y (143)
Cutting Width
Cutting Width
- 0.059 in(11)
- 0.078 in(24)
- 0.079 in(67)
- 0.084 in(69)
- 0.094 in(5)
- 0.098 in(8)
- 0.103 in(5)
- 0.118 in(90)
- 0.119 in(30)
- 0.12 in(31)
- 0.122 in(48)
- 0.123 in(106)
- 0.125 in(56)
- 0.157 in(43)
- 0.1575 in(21)
- 0.158 in(49)
- 0.161 in(40)
- 0.162 in(79)
- 0.187 in(39)
- 0.1875 in(22)
- 0.197 in(61)
- 0.198 in(17)
- 0.201 in(29)
- 0.202 in(71)
- 0.236 in(51)
- 0.241 in(77)
- 0.25 in(41)
- 0.311 in(7)
- 0.312 in(12)
- 0.313 in(8)
- 0.315 in(28)
- 0.316 in(7)
- 0.32 in(45)
- 0.375 in(13)
- 0.394 in(16)
- 0.399 in(32)
to
Cutting Width
Cutting Width
- 1.49 mm(2)
- 1.5 mm(9)
- 1.99 mm(24)
- 2.0 mm(67)
- 2.13 mm(69)
- 2.38 mm(2)
- 2.388 mm(3)
- 2.49 mm(2)
- 2.5 mm(6)
- 2.62 mm(5)
- 3.0 mm(91)
- 3.05 mm(31)
- 3.1 mm(43)
- 3.11 mm(40)
- 3.12 mm(78)
- 3.13 mm(63)
- 3.175 mm(52)
- 3.18 mm(33)
- 4.0 mm(73)
- 4.1 mm(40)
- 4.11 mm(24)
- 4.12 mm(75)
- 4.76 mm(30)
- 4.762 mm(31)
- 5.0 mm(62)
- 5.1 mm(29)
- 5.12 mm(53)
- 5.13 mm(36)
- 6.0 mm(51)
- 6.12 mm(43)
- 6.13 mm(49)
- 6.35 mm(41)
- 7.937 mm(10)
- 7.938 mm(8)
- 7.94 mm(8)
- 8.0 mm(30)
- 8.12 mm(14)
- 8.13 mm(37)
- 9.525 mm(11)
- 9.53 mm(6)
- 10.0 mm(16)
- 10.13 mm(32)
to
Front End Type
Front End Type
- MCS - Modular Cartridge System (3)
Insert Shape
Insert Shape
- PRISMATIC (904)
Cartridge Size
Cartridge Size
- 50 (90)
- 65 (21)
Front End Style
Front End Style
- MCS01 Modular Deep Grooving (3)
Insert Size
Insert Size
- 2S (11)
- 3 (3)
- 3S (8)
- 4 (2)
- 4S (1)
- 5 (1)
- 5S (2)
- 6 (3)
- 8 (1)
Maximum Cutting Depth
Maximum Cutting Depth
- 0.1969 in(3)
- 0.2756 in(2)
- 0.3543 in(1)
- 0.4331 in(4)
- 0.4724 in(37)
- 0.551 in(3)
- 0.5512 in(55)
- 0.748 in(17)
- 0.9449 in(21)
to
Maximum Cutting Depth
Maximum Cutting Depth
- 5.0 mm(3)
- 7.0 mm(2)
- 9.0 mm(1)
- 11.0 mm(4)
- 12.0 mm(37)
- 13.995 mm(2)
- 14.0 mm(56)
- 18.999 mm(1)
- 19.0 mm(16)
- 24.0 mm(21)
to
Gage Length
Gage Length
- 58.5000 in(1)
- 63.5000 in(2)
- 138.1500 in(1)
- 138.7500 in(2)
- 139.2500 in(2)
- 139.9000 in(5)
- 139.9030 in(1)
- 140.4000 in(4)
- 140.5500 in(3)
- 150.0000 in(2)
- 152.4000 in(4)
- 158.7500 in(2)
- 159.2500 in(2)
- 170.0000 in(1)
- 177.8000 in(2)
Gage Length
Gage Length
- 58.5000 mm(1)
- 63.5000 mm(2)
- 138.1500 mm(1)
- 138.7500 mm(2)
- 139.2500 mm(2)
- 139.9000 mm(5)
- 139.9030 mm(1)
- 140.4000 mm(4)
- 140.5500 mm(3)
- 150.0000 mm(2)
- 152.4000 mm(4)
- 158.7500 mm(2)
- 159.2500 mm(2)
- 170.0000 mm(1)
- 177.8000 mm(2)
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 1.64 mm(2)
- 1.65 mm(6)
- 1.76 mm(6)
- 1.9 mm(13)
- 2.0 mm(40)
- 2.48 mm(7)
- 2.5 mm(3)
- 2.58 mm(8)
- 2.73 mm(6)
- 2.9 mm(18)
- 3.0 mm(20)
- 3.3 mm(12)
- 3.4 mm(56)
- 3.41 mm(12)
- 3.45 mm(8)
- 3.5 mm(40)
- 3.51 mm(5)
- 3.52 mm(6)
- 3.6 mm(6)
- 3.8 mm(7)
- 4.07 mm(7)
- 4.1 mm(14)
- 4.15 mm(8)
- 4.2 mm(55)
- 4.4 mm(11)
- 4.5 mm(18)
- 4.6 mm(1)
- 4.74 mm(10)
- 4.8 mm(7)
- 4.9 mm(54)
- 5.0 mm(1)
- 5.3 mm(6)
- 5.9 mm(12)
- 6.0 mm(22)
- 6.1 mm(6)
- 6.24 mm(4)
- 6.35 mm(2)
- 6.4 mm(27)
- 6.5 mm(8)
- 7.3 mm(2)
- 7.94 mm(5)
- 8.1 mm(13)
- 8.2 mm(5)
to
Maximum Cutting Insert Depth
Maximum Cutting Insert Depth
- 0.064 in(2)
- 0.065 in(6)
- 0.069 in(6)
- 0.075 in(13)
- 0.079 in(40)
- 0.097 in(1)
- 0.098 in(9)
- 0.101 in(8)
- 0.108 in(6)
- 0.115 in(18)
- 0.118 in(20)
- 0.13 in(12)
- 0.132 in(4)
- 0.133 in(1)
- 0.134 in(63)
- 0.136 in(8)
- 0.138 in(51)
- 0.143 in(6)
- 0.148 in(1)
- 0.149 in(6)
- 0.159 in(2)
- 0.16 in(7)
- 0.162 in(6)
- 0.163 in(14)
- 0.164 in(1)
- 0.165 in(54)
- 0.173 in(1)
- 0.175 in(10)
- 0.177 in(18)
- 0.182 in(1)
- 0.187 in(10)
- 0.188 in(1)
- 0.189 in(6)
- 0.192 in(11)
- 0.193 in(35)
- 0.194 in(8)
- 0.196 in(1)
- 0.208 in(6)
- 0.234 in(12)
- 0.235 in(4)
- 0.236 in(18)
- 0.238 in(3)
- 0.241 in(3)
- 0.246 in(4)
- 0.25 in(2)
- 0.251 in(6)
- 0.252 in(19)
- 0.254 in(2)
- 0.256 in(8)
- 0.289 in(2)
- 0.312 in(5)
- 0.319 in(13)
- 0.322 in(5)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 1.1024 in(1)
- 2.7559 in(3)
- 3.5433 in(2)
- 4.7244 in(5)
to
Minimum Groove Diameter
Minimum Groove Diameter
- 28.0 mm(1)
- 70.0 mm(3)
- 90.0 mm(2)
- 120.0 mm(5)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 38.0 mm(1)
to
Maximum Groove Diameter
Maximum Groove Diameter
- 1.4961 in(1)
to
Insert Geometry
Shape
Shape
- PRISMATIC (761)
Insert Seat Size
Insert Seat Size
- 1 (11)
- 10 (49)
- 2 (52)
- 2B (18)
- 2S (14)
- 3 (139)
- 3S (24)
- 4 (135)
- 4S (14)
- 5 (94)
- 5S (16)
- 6 (124)
- 8 (71)
Cutting Tool Material
Cutting Tool Material
- B H (89)
- B L (84)
- C N (102)
- D P (69)
- H T (89)
- H W (866)
Back-End
Connection Type
Connection Type
- BORING BAR (11)
- SQUARE SHANK (21)
System Size
System Size
- KM63XMZ (3)
Back-End Diameter
Back-End Diameter
- 15.875 mm(1)
- 16.0 mm(2)
- 19.05 mm(1)
- 20.0 mm(2)
- 25.0 mm(3)
- 25.4 mm(2)
- 63.0 mm(3)
to
Back-End Diameter
Back-End Diameter
- 2.4803 in(3)
to
Shank Height
Shank Height
- 0.75 in(2)
- 0.7874 in(10)
- 0.9843 in(5)
- 1.0 in(4)
to
Shank Height
Shank Height
- 19.05 mm(2)
- 20.0 mm(10)
- 25.0 mm(5)
- 25.4 mm(4)
to
Shank Width
Shank Width
- 0.75 in(2)
- 0.7874 in(10)
- 0.9843 in(5)
- 1.0 in(4)
to
Shank Width
Shank Width
- 19.05 mm(2)
- 20.0 mm(10)
- 25.0 mm(5)
- 25.4 mm(4)
to
Other
Insert Hand
Insert Hand
- L (84)
- N (865)
- R (93)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
