HTS-C System
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (76)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(76)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(76)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(76)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(76)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(76)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(76)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(76)
- M Stainless Steel (80)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(80)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(80)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(80)
- K Cast Iron (94)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(94)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(94)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(94)
- N Non-Ferrous Materials (48)
- N3High-Silicon Aluminum Alloys Si >12.2%(44)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(48)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (48)
- N6Carbon, Graphite Composites, CFRP (48)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (48)
- N7MMC's (43)
- N1Wrought Aluminum (48)
- S High-Temp Alloys (79)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(79)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(79)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(79)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(79)
- H Hardened Materials (27)
- H3Hardened Materials 56-60 HRC(27)
- H1Hardened Materials 44-48 HRC(27)
- H4Hardened Materials >60 HRC(27)
- H2Hardened Materials 48-55 HRC(27)
Applications
Applications
Drilling (4)
Cutting Diameter
Cutting Diameter
- 0.1969 in(1)
- 0.2362 in(1)
- 0.315 in(1)
- 0.3937 in(1)
to
Cutting Diameter
Cutting Diameter
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(1)
- 10.0 mm(1)
to
Cutting Condition Material
Cutting Condition Material
- K1 (31)
- K2 (31)
- K3 (31)
- M1 (47)
- M2 (47)
- M3 (47)
- N1 (5)
- N2 (5)
- N3 (5)
- N4 (5)
- N5 (5)
- N6 (5)
- N7 (5)
- P0 (43)
- P1 (43)
- P2 (43)
- P3 (43)
- P4 (43)
- P5 (43)
- P6 (43)
- S1 (39)
- S2 (39)
- S3 (39)
- S4 (39)
Cutting Condition
Cutting Condition
- Interrupted (31)
- Stable (87)
- Unstable (35)
Connection Style
Connection Style
- HTS-C Pilot Drill Shank (4)
Number of Flutes
Number of Flutes
- 2 (4)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 2.0 (76)
- 4.0 (24)
to
Internal Coolant Capability
Internal Coolant Capability
Over All Length [L]
Over All Length [L]
- 1.2001 in(1)
- 1.4567 in(1)
- 1.752 in(1)
- 2.1457 in(1)
to
Over All Length [L]
Over All Length [L]
- 30.5 mm(1)
- 37.0 mm(1)
- 44.5 mm(1)
- 54.5 mm(1)
to
Corner Radius
Corner Radius
- 0.008 in(3)
- 0.012 in(1)
- 0.016 in(41)
- 0.024 in(4)
- 0.031 in(25)
- 0.039 in(8)
- 0.047 in(10)
- 0.063 in(5)
- 0.079 in(3)
to
Corner Radius
Corner Radius
- 0.2 mm(3)
- 0.3 mm(1)
- 0.4 mm(41)
- 0.6 mm(4)
- 0.8 mm(25)
- 1.0 mm(8)
- 1.2 mm(10)
- 1.6 mm(5)
- 2.0 mm(3)
to
Corner Chamfer
Corner Chamfer
- 0.0 mm(100)
to
Corner Chamfer
Corner Chamfer
- 0.0 in(100)
to
Application
Coating
Coating
- Uncoated (4)
Minimum Depth of Cut
Minimum Feed
Minimum Feed
Grade Of Cutting Tool
Grade Of Cutting Tool
- AS3 (4)
- CS5 (1)
- KC7140 (8)
- KC720 (4)
- KC7215 (32)
- KCMS35 (8)
- KCPK10 (6)
- KCU25 (17)
- KCU40 (18)
- KM1 (6)
Hand Of Tool
Hand Of Tool
- R (4)
Drill Type
Drill Type
- 81-06 Spot Drill (4)
Wiper Insert
Wiper Insert
- N (100)
Drilling Condition Material
Drilling Condition Material
- K1 (31)
- K2 (31)
- K3 (31)
- M1 (47)
- M2 (47)
- M3 (47)
- N1 (5)
- N2 (5)
- N3 (5)
- N4 (5)
- N5 (5)
- N6 (5)
- N7 (5)
- P0 (43)
- P1 (43)
- P2 (43)
- P3 (43)
- P4 (43)
- P5 (43)
- P6 (43)
- S1 (39)
- S2 (39)
- S3 (39)
- S4 (39)
Front-End
Insert Shape
Insert Shape
- S-SQUARE 90 (100)
Point Angle
Point Angle
- 118.0 (4)
to
Insert Geometry
Shape
Shape
- S-SQUARE 90 (100)
Insert IC Size
Insert IC Size
- 6.35 mm(17)
- 7.75 mm(1)
- 7.925 mm(16)
- 7.95 mm(5)
- 9.525 mm(26)
- 12.7 mm(24)
- 15.725 mm(2)
- 15.875 mm(9)
to
Insert IC Size
Insert IC Size
- 0.25 in(17)
- 0.305 in(1)
- 0.312 in(16)
- 0.313 in(5)
- 0.375 in(26)
- 0.5 in(24)
- 0.619 in(2)
- 0.625 in(9)
to
Cutting Edge Length
Cutting Edge Length
- 6.35 mm(17)
- 7.742 mm(1)
- 7.797 mm(2)
- 7.937 mm(19)
- 9.382 mm(2)
- 9.525 mm(24)
- 12.557 mm(2)
- 12.7 mm(31)
- 15.732 mm(2)
to
Cutting Edge Length
Cutting Edge Length
- 0.25 in(17)
- 0.3048 in(1)
- 0.307 in(2)
- 0.3125 in(19)
- 0.3694 in(2)
- 0.375 in(24)
- 0.4944 in(2)
- 0.5 in(31)
- 0.619 in(2)
to
Chip Breaker CBMD
Chip Breaker CBMD
- 20 (33)
- 21 (30)
- 22 (4)
- 31 (12)
- HP (4)
- MD (5)
- MDT (3)
Cutting Tool Material
Cutting Tool Material
- H W (100)
Tolerance Class
Tolerance Class
- G (16)
- H (12)
- P (6)
Back-End
Connection Type
Connection Type
- CYLINDRICAL (4)
Back-End Diameter
Back-End Diameter
- 5.0 mm(1)
- 6.0 mm(1)
- 8.0 mm(1)
- 10.0 mm(1)
to
Back-End Diameter
Back-End Diameter
- 0.1969 in(1)
- 0.2362 in(1)
- 0.315 in(1)
- 0.3937 in(1)
to
Other
Insert Hand
Insert Hand
- N (24)
- R (76)
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
