KM50TS™ Adapters
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (13)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(13)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(13)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(13)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(13)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(13)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(13)
- M Stainless Steel (13)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(13)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(13)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(13)
- K Cast Iron (13)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(13)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(13)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(13)
- N Non-Ferrous Materials (13)
- N1Wrought Aluminum (13)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(13)
- N3High-Silicon Aluminum Alloys Si >12.2%(13)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (13)
- N5Nylon, Plastics, Rubbers, Phenolics, Resins, Fiberglass (13)
- N6Carbon, Graphite Composites, CFRP (13)
- N7MMC's (13)
- S High-Temp Alloys (13)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(13)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(13)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(13)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(13)
- H Hardened Materials (12)
- H1Hardened Materials 44-48 HRC(12)
- H2Hardened Materials 48-55 HRC(12)
- H3Hardened Materials 56-60 HRC(12)
- H4Hardened Materials >60 HRC(12)
Applications
Applications
Convex Drilling (3)
Drilling (3)
Inclined Entry Drilling (3)
Inclined Exit Drilling (3)
X-Offset Drilling (3)
Cutting Diameter
Cutting Diameter
- 0.625 in(1)
- 0.75 in(1)
- 0.8125 in(1)
- 0.875 in(1)
- 0.9375 in(1)
- 1.125 in(1)
- 1.25 in(1)
- 1.375 in(1)
- 1.5 in(1)
- 1.625 in(1)
- 1.75 in(1)
- 1.875 in(1)
- 2.0 in(1)
to
Cutting Diameter
Cutting Diameter
- 15.875 mm(1)
- 19.05 mm(1)
- 20.638 mm(1)
- 22.225 mm(1)
- 23.812 mm(1)
- 28.575 mm(1)
- 31.75 mm(1)
- 34.925 mm(1)
- 38.1 mm(1)
- 41.275 mm(1)
- 44.45 mm(1)
- 47.625 mm(1)
- 50.8 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 47.625 mm(1)
- 57.15 mm(1)
- 61.912 mm(1)
- 66.675 mm(1)
- 71.438 mm(1)
- 85.725 mm(1)
- 95.25 mm(1)
- 104.775 mm(1)
- 114.3 mm(1)
- 123.825 mm(1)
- 133.35 mm(1)
- 142.875 mm(1)
- 152.4 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 1.875 in(1)
- 2.25 in(1)
- 2.4375 in(1)
- 2.625 in(1)
- 2.8125 in(1)
- 3.375 in(1)
- 3.75 in(1)
- 4.125 in(1)
- 4.5 in(1)
- 4.875 in(1)
- 5.25 in(1)
- 5.625 in(1)
- 6.0 in(1)
to
Reach
Reach
- 2.5197 in(1)
- 2.9921 in(1)
- 3.189 in(1)
- 3.3858 in(1)
- 3.5433 in(1)
- 4.2126 in(1)
- 4.6063 in(1)
- 5.0787 in(1)
- 5.4724 in(1)
- 6.2205 in(1)
- 6.5748 in(1)
- 7.1654 in(1)
- 7.5197 in(1)
to
Reach
Reach
- 64.0 mm(1)
- 76.0 mm(1)
- 81.0 mm(1)
- 86.0 mm(1)
- 90.0 mm(1)
- 107.0 mm(1)
- 117.0 mm(1)
- 129.0 mm(1)
- 139.0 mm(1)
- 158.0 mm(1)
- 167.0 mm(1)
- 182.0 mm(1)
- 191.0 mm(1)
to
Connection Style
Connection Style
- KM (13)
Number of Flutes
Number of Flutes
- 2 (13)
Cutting Edges Per Insert
Cutting Edges Per Insert
- 1.0 (8)
- 3.0 (13)
to
Over All Length [L]
Over All Length [L]
- 4.9068 in(1)
- 5.2818 in(1)
- 5.4693 in(1)
- 5.6568 in(1)
- 5.8433 in(1)
- 6.5079 in(1)
- 6.8829 in(1)
- 7.3698 in(1)
- 7.7579 in(1)
- 8.4959 in(1)
- 8.8709 in(1)
- 9.4429 in(1)
- 9.8179 in(1)
to
Over All Length [L]
Over All Length [L]
- 124.634 mm(1)
- 134.159 mm(1)
- 138.921 mm(1)
- 143.684 mm(1)
- 148.421 mm(1)
- 165.3 mm(1)
- 174.825 mm(1)
- 187.194 mm(1)
- 197.05 mm(1)
- 215.795 mm(1)
- 225.32 mm(1)
- 239.849 mm(1)
- 249.374 mm(1)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- CS5 (12)
- K6 (5)
- KC7140 (13)
- KC720 (13)
- KC7215 (12)
- KC7225 (12)
- KC7815 (12)
- KC7820 (7)
- KC7845 (5)
- KC7935 (12)
- KC810 (11)
- KC990 (12)
- KCMS35 (11)
- KCMS40 (1)
- KCPK10 (13)
- KCU25 (13)
- KCU40 (13)
- KD1425 (12)
- KMF (13)
- KU40D (12)
Hand Of Tool
Hand Of Tool
- R (13)
Drill Type
Drill Type
- 86-01 Indexable Drill (13)
Drilling Condition Material
Drilling Condition Material
- K1 (13)
- K2 (13)
- K3 (13)
- M1 (13)
- M2 (13)
- M3 (13)
- N1 (13)
- N2 (13)
- N3 (13)
- N4 (13)
- N5 (13)
- N6 (13)
- N7 (13)
- P0 (13)
- P1 (13)
- P2 (13)
- P3 (13)
- P4 (13)
- P5 (13)
- P6 (13)
- S1 (13)
- S2 (13)
- S3 (13)
- S4 (13)
Front-End
Adapter Front-End
Adapter Front-End
- BORING BAR ADAPTER (16)
- COMBI SHELL ADAPTER (3)
- DRILL CHUCK ADAPTER (1)
- END MILL ADAPTER (12)
- ER COLLET CHUCK (3)
- EXTENSION (2)
- HYDRAULIC CHUCK (8)
- REDUCER (2)
- SHELL MILL ADAPTER (9)
- TAP CHUCK ADAPTER (2)
- WHISTLE NOTCH ADAPTER (10)
Front End Type
Front End Type
- FDA - Milling Cutter Arbor (12)
- KMT - KM Adapter (4)
- SWB - Tap Chuck Adapter (2)
- SZK - Collet Taper (3)
- ZYL - Cylindrical Adapter (47)
Insert Shape
Insert Shape
- X-TRIGON 84 (13)
Front End Style
Front End Style
- FDA13 Long&TranDrv&CutRetScr (2)
- FDA22 Transv Drive & SHCS (9)
- FDA23 Longit&Transv Drv&SHCS (1)
- KMT00 All KM, except 02,05,09 (4)
- SWB-01 WFL#...WES#(Bilz) (2)
- SZK02 Collets 8 Degree Taper (3)
- ZYL01 Straight Shank (9)
- ZYL10 Weldon Shank (12)
- ZYL13 2Deg-Whistle Notch (10)
- ZYL22 Boring Bar Shank (16)
Gage Length
Gage Length
- 26.0000 in(3)
- 28.0000 in(1)
- 32.0000 in(3)
- 40.0000 in(3)
- 42.0000 in(1)
- 45.0000 in(2)
- 50.0000 in(4)
- 50.0500 in(1)
- 55.0000 in(4)
- 60.0000 in(7)
- 65.0000 in(6)
- 70.0000 in(9)
- 75.0000 in(2)
- 75.0500 in(1)
- 80.0000 in(8)
- 85.0000 in(6)
- 90.0000 in(2)
- 95.0000 in(1)
- 100.0000 in(2)
- 105.0000 in(1)
- 110.9000 in(1)
Gage Length
Gage Length
- 26.0000 mm(3)
- 28.0000 mm(1)
- 32.0000 mm(3)
- 40.0000 mm(3)
- 42.0000 mm(1)
- 45.0000 mm(2)
- 50.0000 mm(4)
- 50.0500 mm(1)
- 55.0000 mm(4)
- 60.0000 mm(7)
- 65.0000 mm(6)
- 70.0000 mm(9)
- 75.0000 mm(2)
- 75.0500 mm(1)
- 80.0000 mm(8)
- 85.0000 mm(6)
- 90.0000 mm(2)
- 95.0000 mm(1)
- 100.0000 mm(2)
- 105.0000 mm(1)
- 110.9000 mm(1)
Front End Size
Front End Size
- 2.5 in(1)
- 6.0 in(3)
- 8.0 in(3)
- 9.525 in(2)
- 10.0 in(4)
- 12.0 in(4)
- 12.7 in(3)
- 14.0 in(2)
- 15.875 in(2)
- 16.0 in(4)
- 18.0 in(2)
- 19.027 in(1)
- 19.05 in(4)
- 20.0 in(4)
- 22.0 in(2)
- 25.0 in(3)
- 25.4 in(4)
- 27.0 in(2)
- 31.027 in(1)
- 31.75 in(3)
- 32.0 in(6)
- 38.1 in(1)
- 40.0 in(2)
- 50.0 in(2)
to
Front End Size
Front End Size
- 2.5 mm(1)
- 6.0 mm(3)
- 8.0 mm(3)
- 9.525 mm(2)
- 10.0 mm(4)
- 12.0 mm(4)
- 12.7 mm(3)
- 14.0 mm(2)
- 15.875 mm(2)
- 16.0 mm(4)
- 18.0 mm(2)
- 19.027 mm(1)
- 19.05 mm(4)
- 20.0 mm(4)
- 22.0 mm(2)
- 25.0 mm(3)
- 25.4 mm(4)
- 27.0 mm(2)
- 31.027 mm(1)
- 31.75 mm(3)
- 32.0 mm(6)
- 38.1 mm(1)
- 40.0 mm(2)
- 50.0 mm(2)
to
Back-End
Connection Type
Connection Type
- TAPER SHANK (13)
System Size
System Size
- KM50 (10)
- KM50TS (71)
Back-End Diameter
Back-End Diameter
- 50.0 mm(81)
to
Back-End Diameter
Back-End Diameter
- 1.9685 in(81)
to
Other
Solid Indexable Tool
Solid Indexable Tool
No filters matching ""
