NC Spot Drills
Enhance hole positioning and accuracy with Kennametal NC (Numerical Control) spot drills. These high-performance solid carbide spot drills are designed for pre-centering operations for more controlled drilling operations. These tools feature short flute lengths, providing stability and minimizing any potential deflection during the initial stages of hole preparation. Our NC spot drills are available for chamfering, tapping, and protecting the cutting edges of solid carbide drill lines. For continuous improvement with your machining operations, Kennametal's NC spot drills are the perfect choice for achieving superior hole quality and positioning accuracy.
Filters
Filters
View filters in
MetricInch
Workpiece Material
Workpiece Material
- P Steel (19)
- P0Low-Carbon Steels, Long Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
- P1Low-Carbon Steels, Short Chipping C < .25%; <125 HB; <530 N/mm^2 UTS(19)
- P2Medium and High Carbon Steels C < .25%; <220 HB; <25 HRC; >530 N/mm^2 UTS(19)
- P3Alloy Steels & Tool Steels C > .25%; <330 HB; <35 HRC; 600-850 N/mm^2 UTS(19)
- P4Alloy Steels & Tool Steels C > .25%; 350-420 HB; 35-43 HRC; 850-1400 N/mm^2 UTS(19)
- P5Ferritic, Martensitic, and PH Stainless Steels <330 HB; <35 HRC; 600-900 N/mm^2 UTS(19)
- P6High Strength Ferritic, Martensitic, and PH Stainless Steels 350-450 HB; 35-43 HRC; 900-2400 N/mm^2 UTS(19)
- M Stainless Steel (19)
- M1Austenitic Stainless Steel 130-200 HB; <600 N/mm^2 UTS(19)
- M2High Strength Austenitic Stainless and Cast Stainless Steels 150-230 HB; <25 HRC; >600 N/mm^2 UTS(19)
- M3Duplex Stainless Steel 135-275 HB; <30 HRC; 500-1200 N/mm^2 UTS(19)
- K Cast Iron (19)
- K1Gray Cast Iron 120-290 HB; <32 HRC; 125-500 N/mm^2 UTS(19)
- K2Low and Medium Strength CGI and Ductile Irons 130-260 HB; <28 HRC; <600 N/mm^2 UTS(19)
- K3High Strength Ductile and Austempered Ductile Iron 180-350 HB; <43 HRC; >600 N/mm^2 UTS(19)
- N Non-Ferrous Materials (19)
- N1Wrought Aluminum (19)
- N2Low-Silicon Aluminum Alloys and Magnesium Alloys Si <12.2%(19)
- N3High-Silicon Aluminum Alloys Si >12.2%(19)
- N4Copper, Brass, Zinc-based on machinability index range of 70-100 (19)
- S High-Temp Alloys (19)
- S1Iron-Based, Heat-Resistant Alloys 160-260 HB; 25-48 HRC; 500-1200 N/mm^2 UTS(19)
- S2Cobalt-Based, Heat-Resistant Alloys 250-450 HB; 25-48 HRC; 1000-1450 N/mm^2 UTS(19)
- S3Nickel-Based, Heat Resistant Alloys 160-450 HB; <48 HRC; 600-1700 N/mm^2 UTS(19)
- S4Titanium and Titanium Alloys 300-400 HB; 33-43 HRC; 900-1600 N/mm^2 UTS(19)
Applications
Applications
Convex Drilling (19)
Drilling (7)
Cutting Diameter
Cutting Diameter
- 0.1575 in(3)
- 0.2362 in(3)
- 0.315 in(3)
- 0.3937 in(3)
- 0.4724 in(3)
- 0.6299 in(1)
- 0.63 in(1)
- 0.7874 in(2)
to
Cutting Diameter
Cutting Diameter
- 4.0 mm(3)
- 6.0 mm(3)
- 8.0 mm(3)
- 10.0 mm(3)
- 12.0 mm(3)
- 16.0 mm(2)
- 20.0 mm(2)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 6.5 mm(2)
- 9.0 mm(2)
- 11.0 mm(2)
- 12.0 mm(2)
- 14.0 mm(2)
- 16.0 mm(1)
- 18.0 mm(1)
to
Maximum Hole Depth [L4]
Maximum Hole Depth [L4]
- 0.2559 in(2)
- 0.3543 in(2)
- 0.4331 in(2)
- 0.4724 in(2)
- 0.5512 in(2)
- 0.63 in(1)
- 0.7087 in(1)
to
Reach
Reach
- 0.4724 in(1)
- 0.5512 in(1)
- 0.7874 in(2)
- 0.8661 in(1)
- 0.9449 in(1)
- 1.0236 in(1)
to
Reach
Reach
- 12.0 mm(1)
- 14.0 mm(1)
- 20.0 mm(2)
- 22.0 mm(1)
- 24.0 mm(1)
- 26.0 mm(1)
to
Over All Length [L]
Over All Length [L]
- 2.126 in(6)
- 2.2835 in(3)
- 2.5984 in(3)
- 2.874 in(3)
- 3.228 in(1)
- 3.2283 in(1)
- 3.622 in(2)
to
Over All Length [L]
Over All Length [L]
- 54.0 mm(6)
- 58.0 mm(3)
- 66.0 mm(3)
- 73.0 mm(3)
- 82.0 mm(2)
- 92.0 mm(2)
to
Application
Grade Of Cutting Tool
Grade Of Cutting Tool
- K10 (12)
- KU15 (7)
Front-End
Point Angle
Point Angle
- 90.0 (7)
- 120.0 (5)
- 145.0 (7)
to
Back-End
Back-End Diameter
Back-End Diameter
- 6.0 mm(6)
- 8.0 mm(3)
- 10.0 mm(3)
- 12.0 mm(3)
- 16.0 mm(2)
- 20.0 mm(2)
to
Back-End Diameter
Back-End Diameter
- 0.2362 in(6)
- 0.315 in(3)
- 0.3937 in(3)
- 0.4724 in(3)
- 0.6299 in(1)
- 0.63 in(1)
- 0.7874 in(2)
to
No filters matching ""
